A conformation-specific ON-switch for controlling CAR T cells with an orally available drug.

Molecular ON-switches in which a chemical compound induces protein-protein interactions can allow cellular function to be controlled with small molecules. ON-switches based on clinically applicable compounds and human proteins would greatly facilitate their therapeutic use. Here, we developed an ON-switch system in which the human retinol binding protein 4 (hRBP4) of the lipocalin family interacts with engineered hRBP4 binders in a small molecule-dependent manner. Two different protein scaffolds were engineered to bind to hRBP4 when loaded with the orally available small molecule A1120. The crystal structure of an assembled ON-switch shows that the engineered binder specifically recognizes the conformational changes induced by A1120 in two loop regions of hRBP4. We demonstrate that this conformation-specific ON-switch is highly dependent on the presence of A1120, as demonstrated by an ∼500-fold increase in affinity upon addition of the small molecule drug. Furthermore, the ON-switch successfully regulated the activity of primary human CAR T cells in vitro. We anticipate that lipocalin-based ON-switches have the potential to be broadly applied for the safe pharmacological control of cellular therapeutics.

Identification of Activating Mutations in the Transmembrane and Extracellular Domains of EGFR.

The epidermal growth factor receptor (EGFR) is frequently mutated in human cancer, most notably non-small-cell lung cancer and glioblastoma. While many frequently occurring EGFR mutations are known to confer constitutive EGFR activation, the situation is less clear for rarely detected variants. In fact, more than 1000 distinct EGFR mutations are listed in the Catalogue of Somatic Mutations in Cancer (COSMIC), but for most of them, the functional consequence is unknown. To identify additional, previously unknown activating mutations in EGFR, we screened a randomly mutated EGFR library for constitutive EGFR phosphorylation using a recently developed high-throughput approach termed PhosphoFlowSeq. Enrichment of the well-known activating mutations S768I, T790M, and L858R validated the experimental approach. Importantly, we also identified the activating mutations S442I and L658Q located in the extracellular and transmembrane domains of EGFR, respectively. To the best of our knowledge, neither S442I nor L658Q has been associated with an activating phenotype before. However, both have been detected in cancer samples. Interestingly, molecular dynamics (MD) simulations suggest that the L658Q mutation located in the hydrophobic transmembrane region forms intermolecular hydrogen bonds, thereby promoting EGFR dimerization and activation. Based on these findings, we screened the COSMIC database for additional hydrophilic mutations in the EGFR transmembrane region and indeed detected moderate constitutive activation of EGFR-G652R. Together, this study demonstrates that unbiased screening for activating mutations in EGFR not only yields well-established substitutions located in the kinase domain but also activating mutations in other regions of EGFR, including the extracellular and transmembrane domains.

Engineered IgG1-Fc--one fragment to bind them all.

The crystallizable fragment (Fc) of the immunoglobulin class G (IgG) is a very attractive scaffold for the design of novel therapeutics due to its quality of uniting all essential antibody functions. This article reviews the functionalization of this homodimeric glycoprotein by diversification of structural loops of CH3 domains for the design of Fcabs, i.e. antigen-binding Fc proteins. It reports the design of libraries for the selection of nanomolar binders with wildtype-like in vivo half-life and correlation of Fc receptor binding and ADCC. The in vitro and preclinical biological activity of selected Fcabs is compared with that of clinically approved antibodies. Recently, the great potential of the scaffold for the development of therapeutics for clinical use has been shown when the HER2-binding Fcab FS102 entered clinical phase I. Furthermore, methods for the engineering of biophysical properties of Fcabs applicable to proteins in general are presented as well as the different approaches in the design of heterodimeric Fc-based scaffolds used in the generation of bispecific monoclonal antibodies. Finally, this work critically analyzes and compares the various efforts in the design of highly diverse and functional libraries that have been made in the engineering of IgG1-Fc and structurally similar scaffolds.

Cytosolic delivery of siRNA by ultra-high affinity dsRNA binding proteins.

Protein-based methods of siRNA delivery are capable of uniquely specific targeting, but are limited by technical challenges such as low potency or poor biophysical properties. Here, we engineered a series of ultra-high affinity siRNA binders based on the viral protein p19 and developed them into siRNA carriers targeted to the epidermal growth factor receptor (EGFR). Combined in trans with a previously described endosome-disrupting agent composed of the pore-forming protein Perfringolysin O (PFO), potent silencing was achieved in vitro with no detectable cytotoxicity. Despite concerns that excessively strong siRNA binding could prevent the discharge of siRNA from its carrier, higher affinity continually led to stronger silencing. We found that this improvement was due to both increased uptake of siRNA into the cell and improved pharmacodynamics inside the cell. Mathematical modeling predicted the existence of an affinity optimum that maximizes silencing, after which siRNA sequestration decreases potency. Our study characterizing the affinity dependence of silencing suggests that siRNA-carrier affinity can significantly affect the intracellular fate of siRNA and may serve as a handle for improving the efficiency of delivery. The two-agent delivery system presented here possesses notable biophysical properties and potency, and provide a platform for the cytosolic delivery of nucleic acids.

Strong Enrichment of Aromatic Residues in Binding Sites from a Charge-neutralized Hyperthermostable Sso7d Scaffold Library.

The Sso7d protein from the hyperthermophilic archaeon Sulfolobus solfataricus is an attractive binding scaffold because of its small size (7 kDa), high thermal stability (Tm of 98 °C), and absence of cysteines and glycosylation sites. However, as a DNA-binding protein, Sso7d is highly positively charged, introducing a strong specificity constraint for binding epitopes and leading to nonspecific interaction with mammalian cell membranes. In the present study, we report charge-neutralized variants of Sso7d that maintain high thermal stability. Yeast-displayed libraries that were based on this reduced charge Sso7d (rcSso7d) scaffold yielded binders with low nanomolar affinities against mouse serum albumin and several epitopes on human epidermal growth factor receptor. Importantly, starting from a charge-neutralized scaffold facilitated evolutionary adaptation of binders to differentially charged epitopes on mouse serum albumin and human epidermal growth factor receptor, respectively. Interestingly, the distribution of amino acids in the small and rigid binding surface of enriched rcSso7d-based binders is very different from that generally found in more flexible antibody complementarity-determining region loops but resembles the composition of antibody-binding energetic hot spots. Particularly striking was a strong enrichment of the aromatic residues Trp, Tyr, and Phe in rcSso7d-based binders. This suggests that the rigidity and small size of this scaffold determines the unusual amino acid composition of its binding sites, mimicking the energetic core of antibody paratopes. Despite the high frequency of aromatic residues, these rcSso7d-based binders are highly expressed, thermostable, and monomeric, suggesting that the hyperstability of the starting scaffold and the rigidness of the binding surface confer a high tolerance to mutation.

Creating stable stem regions for loop elongation in Fcabs - insights from combining yeast surface display, in silico loop reconstruction and molecular dynamics simulations.

Fcabs (Fc antigen binding) are crystallizable fragments of IgG where the C-terminal structural loops of the CH3 domain are engineered for antigen binding. For the design of libraries it is beneficial to know positions that will permit loop elongation to increase the potential interaction surface with antigen. However, the insertion of additional loop residues might impair the immunoglobulin fold. In the present work we have probed whether stabilizing mutations flanking the randomized and elongated loop region improve the quality of Fcab libraries. In detail, 13 libraries were constructed having the C-terminal part of the EF loop randomized and carrying additional residues (1, 2, 3, 5 or 10, respectively) in the absence and presence of two flanking mutations. The latter have been demonstrated to increase the thermal stability of the CH3 domain of the respective solubly expressed proteins. Assessment of the stability of the libraries expressed on the surface of yeast cells by flow cytometry demonstrated that loop elongation was considerably better tolerated in the stabilized libraries. By using in silico loop reconstruction and mimicking randomization together with MD simulations the underlying molecular dynamics were investigated. In the presence of stabilizing stem residues the backbone flexibility of the engineered EF loop as well as the fluctuation between its accessible conformations were decreased. In addition the CD loop (but not the AB loop) and most of the framework regions were rigidified. The obtained data are discussed with respect to the design of Fcabs and available data on the relation between flexibility and affinity of CDR loops in Ig-like molecules.

Small molecule-regulated switches to provide functional control of CAR T cells within the patient.

INTRODUCTION: CAR T cells have generated great excitement due to their remarkable clinical response rates in selected hematologic malignancies. However, these engineered immune cells are living drugs which are hard to control after administration. AREAS COVERED: We discuss small molecule-regulated switch systems which can potentially be used to control CAR T cell function within the patient, as well as the most important obstacles in the CAR T cell field, which might be overcome with those switch systems. EXPERT OPINION: There is an urgent need to develop advanced switch systems. Once available, we expect that they will open up new avenues for future CAR T cell generations.

An engineering strategy to target activated EGFR with CAR T cells.

Chimeric antigen receptor (CAR) T cells have shown remarkable response rates in hematological malignancies. In contrast, CAR T cell treatment of solid tumors is associated with several challenges, in particular the expression of most tumor-associated antigens at lower levels in vital organs, resulting in on-target/off-tumor toxicities. Thus, innovative approaches to improve the tumor specificity of CAR T cells are urgently needed. Based on the observation that many human solid tumors activate epidermal growth factor receptor (EGFR) on their surface through secretion of EGFR ligands, we developed an engineering strategy for CAR-binding domains specifically directed against the ligand-activated conformation of EGFR. We show, in several experimental systems, that the generated binding domains indeed enable CAR T cells to distinguish between active and inactive EGFR. We anticipate that this engineering concept will be an important step forward to improve the tumor specificity of CAR T cells directed against EGFR-positive solid cancers.

Directed evolution of stabilized IgG1-Fc scaffolds by application of strong heat shock to libraries displayed on yeast.

We have constructed IgG1-Fc scaffolds with increased thermal stability by directed evolution and yeast surface display. As a basis a new selection strategy that allowed the application of yeast surface display for screening of stabilizing mutations in proteins of already high intrinsic thermal stability and T(m)-values up to 85°C was developed. Besides library construction by error prone PCR, strong heat stress at 79°C for 10min and screening for well-folded proteins by FACS, sorting rounds had to include an efficient plasmid DNA isolation step for amplification and further transfection. We describe the successful application of this experimental setup for selection of 17 single, double and triple IgG1-Fc variants of increased thermal stability after four selection rounds. The recombinantly produced homodimeric proteins showed a wild-type-like elution profile in size exclusion chromatography as well as content of secondary structures. Moreover, the kinetics of binding of FcRn, CD16a and Protein A to the engineered Fc-molecules was very similar to the wild-type protein. These data clearly demonstrate the importance and efficacy of the presented strategy for selection of stabilizing mutations in proteins of high intrinsic stability within reasonable time.

Solving the mystery of the FMC63-CD19 affinity.

The majority of approved CAR T cell products are based on the FMC63-scFv directed against CD19. Surprisingly, although antigen binding affinity is a major determinant for CAR function, the affinity of the benchmark FMC63-scFv has not been unambiguously determined. That is, a wide range of affinities have been reported in literature, differing by more than 100-fold. Using a range of techniques, we demonstrate that suboptimal experimental designs can cause artefacts that lead to over- or underestimation of the affinity. To minimize these artefacts, we performed SPR with strictly monomeric and correctly folded soluble CD19, yielding an FMC63-scFv affinity of 2-6 nM. Together, apart from analyzing the FMC63-scFv affinity under optimized conditions, we also provide potential explanations for the wide range of published affinities. We expect that this study will be highly valuable for interpretations of CAR affinity-function relationships, as well as for the design of future CAR T cell generations.

Directed evolution of proteins for increased stability and expression using yeast display.

The expression of recombinant proteins incorporated into the cell wall of Saccharomyces cerevisiae (yeast surface display) is an important tool for protein engineering and library screening applications. In this review, we discuss the state-of-the-art yeast display techniques used for stability engineering of proteins including antibody fragments and immunoglobulin-like molecules. The paper discusses assets and drawbacks of stability engineering using the correlation between expression density on the yeast surface and thermal stability with respect to the quality control system in yeast. Additionally, strategies based on heat incubation of surface displayed protein libraries for selection of stabilized variants are reported including a recently developed method that allows stabilization of proteins of already high intrinsic thermal stability like IgG1-Fc.

Affinity and Stability Analysis of Yeast Displayed Proteins.

Yeast surface display is a powerful protein engineering technology that is extensively used to improve various properties of proteins, including affinity, specificity, and stability or even to add novel functions (usually ligand binding). Apart from its robustness and versatility as an engineering tool, yeast display offers a further critical advantage: Once the selection campaign is finished, usually resulting in an oligoclonal pool, these enriched protein variants can be analyzed individually on the surface of yeast without the need for any sub-cloning, soluble expression, and purification. Here, we provide detailed protocols for determining both the affinity and the thermal stability of yeast displayed proteins. In addition, we discuss the advantages, challenges, and potential pitfalls associated with affinity and stability analysis using yeast surface display.

Engineering Strategies to Overcome the Stability-Function Trade-Off in Proteins.

In addition to its biological function, the stability of a protein is a major determinant for its applicability. Unfortunately, engineering proteins for improved functionality usually results in destabilization of the protein. This so-called stability-function trade-off can be explained by the simple fact that the generation of a novel protein function─or the improvement of an existing one─necessitates the insertion of mutations, i.e., deviations from the evolutionarily optimized wild-type sequence. In fact, it was demonstrated that gain-of-function mutations are not more destabilizing than other random mutations. The stability-function trade-off is a universal phenomenon during protein evolution that has been observed with completely different types of proteins, including enzymes, antibodies, and engineered binding scaffolds. In this review, we discuss three types of strategies that have been successfully deployed to overcome this omnipresent obstacle in protein engineering approaches: (i) using highly stable parental proteins, (ii) minimizing the extent of destabilization during functional engineering (by library optimization and/or coselection for stability and function), and (iii) repairing damaged mutants through stability engineering. The implementation of these strategies in protein engineering campaigns will facilitate the efficient generation of protein variants that are not only functional but also stable and therefore better-suited for subsequent applications.

PhosphoFlowSeq - A High-throughput Kinase Activity Assay for Screening Drug Resistance Mutations in EGFR.

Drug resistance poses a major challenge for targeted cancer therapy. To be able to functionally screen large randomly mutated target gene libraries for drug resistance mutations, we developed a biochemically defined high-throughput assay termed PhosphoFlowSeq. Instead of selecting for proliferation or resistance to apoptosis, PhosphoFlowSeq directly analyzes the enzymatic activities of randomly mutated kinases, thereby reducing the dependency on the signaling network in the host cell. Moreover, simultaneous analysis of expression levels enables compensation for expression-based biases on a single cell level. Using EGFR and its kinase inhibitor erlotinib as a model system, we demonstrate that the clinically most relevant resistance mutation T790M is reproducibly detected at high frequencies after four independent PhosphoFlowSeq selection experiments. Moreover, upon decreasing the selection pressure, also mutations which only confer weak resistance were identified, including T854A and L792H. We expect that PhosphoFlowSeq will be a valuable tool for the prediction and functional screening of drug resistance mutations in kinases.

Driving CARs with alternative navigation tools - the potential of engineered binding scaffolds.

T cells that are genetically engineered to express chimeric antigen receptors (CAR T cells) have shown impressive clinical efficacy against B-cell malignancies. In contrast to these highly potent CD19-targeting CAR T cells, many of those directed against other tumor entities and antigens currently suffer from several limitations. For example, it has been demonstrated that many scFvs used as antigen-binding domains in CARs show some degree of oligomerization, which leads to tonic signaling, T cell exhaustion, and poor performance in vivo. Therefore, in many cases alternatives to scFvs would be beneficial. Fortunately, due to the development of powerful protein engineering technologies, also non-immunoglobulin-based scaffolds can be engineered to specifically recognize antigens, thus eliminating the historical dependence on antibody-based binding domains. Here, we discuss the advantages and disadvantages of such engineered binding scaffolds, in particular with respect to their application in CARs. We review recent studies, collectively showing that there is no functional or biochemical aspect that necessitates the use of scFvs in CARs. Instead, antigen recognition can also be mediated efficiently by engineered binding scaffolds, as well as natural ligands or receptors fused to the CAR backbone. Finally, we critically discuss the risk of immunogenicity and show that the extent of nonhuman amino acid stretches in engineered scaffolds-even in those based on nonhuman proteins-is more similar to humanized scFvs than might be anticipated. Together, we expect that engineered binding scaffolds and natural ligands and receptors will be increasingly used for the design of CAR T cells.

Directed Evolution of Stabilized Monomeric CD19 for Monovalent CAR Interaction Studies and Monitoring of CAR-T Cell Patients.

CD19 is among the most relevant targets in cancer immunotherapy. However, its extracellular domain (ECD) is prone to aggregation and misfolding, representing a major obstacle for the development and analysis of CD19-targeted therapeutics. Here, we engineered stabilized CD19-ECD (termed SuperFolder) variants, which also showed improved expression rates and, in contrast to the wild type protein, they could be efficiently purified in their monomeric forms. Despite being considerably more stable, these engineered mutants largely preserved the wild type sequence (>98.8%). We demonstrate that the variant SF05 enabled the determination of the monovalent affinity between CD19 and a clinically approved FMC63-based CAR, as well as monitoring and phenotypic characterization of CD19-directed CAR-T cells in the blood of lymphoma patients. We anticipate that the SuperFolder mutants generated in this study will be highly valuable tools for a range of applications in basic immunology and CD19-targeted cancer immunotherapy.

Peroxidasin protein expression and enzymatic activity in metastatic melanoma cell lines are associated with invasive potential.

Peroxidasin, a heme peroxidase, has been shown to play a role in cancer progression. mRNA expression has been reported to be upregulated in metastatic melanoma cell lines and connected to the invasive phenotype, but little is known about how peroxidasin acts in cancer cells. We have analyzed peroxidasin protein expression and activity in eight metastatic melanoma cell lines using an ELISA developed with an in-house peroxidasin binding protein. RNAseq data analysis confirmed high peroxidasin mRNA expression in the five cell lines classified as invasive and low expression in the three non-invasive cell lines. Protein levels of peroxidasin were higher in the cell lines with an invasive phenotype. Active peroxidasin was secreted to the cell culture medium, where it accumulated over time, and peroxidasin protein levels in the medium were also much higher in invasive than non-invasive cell lines. The only well-established physiological role of peroxidasin is in the formation of a sulfilimine bond, which cross-links collagen IV in basement membranes via catalyzed oxidation of bromide to hypobromous acid. We found that peroxidasin secreted from melanoma cells formed sulfilimine bonds in uncross-linked collagen IV, confirming peroxidasin activity and hypobromous acid formation. Moreover, 3-bromotyrosine, a stable product of hypobromous acid reacting with tyrosine residues, was detected in invasive melanoma cells, substantiating that their expression of peroxidasin generates hypobromous acid, and showing that it does not exclusively react with collagen IV, but also with other biomolecules.

Engineering AvidCARs for combinatorial antigen recognition and reversible control of CAR function.

T cells engineered to express chimeric antigen receptors (CAR-T cells) have shown impressive clinical efficacy in the treatment of B cell malignancies. However, the development of CAR-T cell therapies for solid tumors is hampered by the lack of truly tumor-specific antigens and poor control over T cell activity. Here we present an avidity-controlled CAR (AvidCAR) platform with inducible and logic control functions. The key is the combination of (i) an improved CAR design which enables controlled CAR dimerization and (ii) a significant reduction of antigen-binding affinities to introduce dependence on bivalent interaction, i.e. avidity. The potential and versatility of the AvidCAR platform is exemplified by designing ON-switch CARs, which can be regulated with a clinically applied drug, and AND-gate CARs specifically recognizing combinations of two antigens. Thus, we expect that AvidCARs will be a highly valuable platform for the development of controllable CAR therapies with improved tumor specificity.

Directed Evolution of Protein Thermal Stability Using Yeast Surface Display.

Yeast surface display is a powerful protein engineering technology that has been used for many applications including engineering protein stability. Direct screening for improved thermal stability can be accomplished by heat shock of yeast displayed protein libraries. Thermally stable protein variants retain binding to conformationally specific ligands, and this binding event can be detected by flow cytometry, facilitating recovery of yeast clones displaying stabilized protein variants. In early efforts, the major limitation of this approach was the viability threshold of the yeast cells, precluding the application of significantly elevated heat shock temperatures (>50 °C) and therefore limited to the engineering of intrinsically unstable proteins. More recently, however, techniques for stability mutant gene recovery between sorting rounds have obviated the need for yeast growth amplification of improved mutant pools. The resultant methods allow significantly higher denaturation temperatures (up to 85 °C), thereby enabling the engineering of a broader range of protein substrates. In this chapter, a detailed protocol for this stability engineering approach is presented.

Two-faced Fcab prevents polymerization with VEGF and reveals thermodynamics and the 2.15 Å crystal structure of the complex.

Fcabs (Fc domain with antigen-binding sites) are promising novel therapeutics. By engineering of the C-terminal loops of the CH3 domains, 2 antigen binding sites can be inserted in close proximity. To elucidate the binding mode(s) between homodimeric Fcabs and small homodimeric antigens, the interaction between the Fcabs 448 and CT6 (having the AB, CD and EF loops and the C-termini engineered) with homodimeric VEGF was investigated. The crystal structures of these Fcabs, which form polymers with the antigen VEGF in solution, were determined. However, construction of heterodimeric Fcabs (JanusFcabs: one chain Fc-wt, one chain VEGF-binding) results in formation of distinct JanusFcab-VEGF complexes (2:1), which allowed elucidation of the crystal structure of the JanusCT6-VEGF complex at 2.15 Å resolution. VEGF binding to Janus448 and JanusCT6 is shown to be entropically unfavorable, but enthalpically favorable. Structure-function relationships are discussed with respect to Fcab design and engineering strategies.