Comparing the Electronic Structure of Iron, Cobalt, and Nickel Compounds That Feature a Phosphine-Substituted Bis(imino)pyridine Chelate.

It was recently discovered that (Ph2PPrPDI)Mn (PDI = pyridine diimine) exists as a superposition of low-spin Mn(II) that is supported by a PDI dianion and intermediate-spin Mn(II) that is antiferromagnetically coupled to a triplet PDI dianion, a finding that encouraged the synthesis and electronic structure evaluation of late first row metal variants that feature the same chelate. The addition of Ph2PPrPDI to FeBr2 resulted in bromide dissociation and the formation of [(Ph2PPrPDI)FeBr][Br]. Reduction of this precursor using excess sodium amalgam afforded (Ph2PPrPDI)Fe, which possesses an Fe(II) center that is supported by a dianionic PDI ligand. Similarly, reduction of a premixed solution of Ph2PPrPDI and CoCl2 yielded the cobalt analog, (Ph2PPrPDI)Co. EPR spectroscopy and density functional theory calculations revealed that this compound features a high-spin Co(I) center that is antiferromagnetically coupled to a PDI radical anion. The addition of Ph2PPrPDI to Ni(COD)2 resulted in ligand displacement and the formation of (Ph2PPrPDI)Ni, which was found to possess a pendent phosphine group. Single-crystal X-ray diffraction, CASSCF calculations, and EPR spectroscopy indicate that (Ph2PPrPDI)Ni is best described as having a Ni(II)-PDI2- configuration. The electronic differences between these compounds are highlighted, and a computational analysis of Ph2PPrPDI denticity has revealed the thermodynamic penalties associated with phosphine dissociation from 5-coordinate (Ph2PPrPDI)Mn, (Ph2PPrPDI)Fe, and (Ph2PPrPDI)Co.

Reaction of a Molybdenum Bis(dinitrogen) Complex with Carbon Dioxide: A Combined Experimental and Computational Investigation.

Refluxing Mo(CO)6 in the presence of the phosphine-functionalized α-diimine ligand Ph2PPrDI allowed for substitution and formation of the dicarbonyl complex, (Ph2PPrDI)Mo(CO)2. Oxidation with I2 followed by heating resulted in further CO dissociation and isolation of the corresponding diiodide complex, (Ph2PPrDI)MoI2. Reduction of this complex under a N2 atmosphere afforded the corresponding bis(dinitrogen) complex, (Ph2PPrDI)Mo(N2)2. The solid-state structures of all three compounds were found to feature a tetradentate chelate and cis-monodentate ligands. Notably, the addition of CO2 to (Ph2PPrDI)Mo(N2)2 is proposed to result in head-to-tail CO2 coupling to generate the corresponding metallacycle and ultimately a mixture of (Ph2PPrDI)Mo(CO)2 and the bis(oxo) dimer, [(κ3-Ph2PPrDI)Mo(O)(µ-O)]2. Computational studies have been performed to gain insight into the reaction and evaluate the importance of cis-coordination sites for selective head-to-tail CO2 reductive coupling, CO deinsertion, disproportionation, and stepwise CO2 deinsertion.

Redox-Noninnocent Ligand-Supported Vanadium Catalysts for the Chemoselective Reduction of C═X (X = O, N) Functionalities.

Catalysis is the second largest application for V after its use as an additive to improve steel production. Molecular complexes of vanadium(V) are particularly useful and efficient catalysts for oxidation processes; however, their ability to catalyze reductive transformations has yet to be fully explored. Here we report the first examples of polar organic functionality reduction mediated by V. Open-shell VIII complexes that feature a π-radical monoanionic 2,2':6',2″-terpyridine ligand (Rtpy•)- functionalized at the 4'-position (R = (CH3)3SiCH2, C6H5) catalyze mild and chemoselective hydroboration and hydrosilylation of functionalized ketones, aldehydes, imines, esters, and carboxamides with turnover numbers (TONs) of up to ∼1000 and turnover frequencies (TOFs) of up to ∼500 h-1. Computational evaluation of the precatalyst synthesis and activation has revealed underappreciated complexity associated with the redox-active tpy chelate.

Efficient Cobalt Catalyst for Ambient-Temperature Nitrile Dihydroboration, the Elucidation of a Chelate-Assisted Borylation Mechanism, and a New Synthetic Route to Amides.

N,N-Diborylamines have emerged as promising reagents in organic synthesis; however, their efficient preparation and full synthetic utility have yet to be realized. To address both shortcomings, an effective catalyst for nitrile dihydroboration was sought. Heating CoCl2 in the presence of PyEtPDI afforded the six-coordinate Co(II) salt, [(PyEtPDI)CoCl][Cl]. Upon adding 2 equiv of NaEt3BH, hydride transfer to one chelate imine functionality was observed, resulting in the formation of (κ4-N,N,N,N-PyEtIPCHMeNEtPy)Co. Single-crystal X-ray diffraction and density functional theory calculations revealed that this compound possesses a low-spin Co(II) ground state featuring antiferromagnetic coupling to a singly reduced imino(pyridine) moiety. Importantly, (κ4-N,N,N,N-PyEtIPCHMeNEtPy)Co was found to catalyze the dihydroboration of nitriles using HBPin with turnover frequencies of up to 380 h-1 at ambient temperature. Stoichiometric addition experiments revealed that HBPin adds across the Co-Namide bond to generate a hydride intermediate that can react with additional HBPin or nitriles. Computational evaluation of the reaction coordinate revealed that the B-H addition and nitrile insertion steps occur on the antiferromagnetically coupled triplet spin manifold. Interestingly, formation of the borylimine intermediate was found to occur following BPin transfer from the borylated chelate arm to regenerate (κ4-N,N,N,N-PyEtIPCHMeNEtPy)Co. Borylimine reduction is in turn facile and follows the same ligand-assisted borylation pathway. The independent hydroboration of alkyl and aryl imines was also demonstrated at 25 °C. With a series of N,N-diborylamines in hand, their addition to carboxylic acids allowed for the direct synthesis of amides at 120 °C, without the need for an exogenous coupling reagent.

The Emergence of Manganese-Based Carbonyl Hydrosilylation Catalysts.

In recent years, interest in homogeneous manganese catalyst development has intensified because of the earth-abundant and nontoxic nature of this metal. Although compounds of Mn have largely been utilized for epoxidation reactions, recent efforts have revealed that Mn catalysts can mediate a broad range of reductive transformations. Low-valent Mn compounds have proven to be particularly effective for the hydrosilylation of carbonyl- and carboxylate-containing substrates, and this Account aims to highlight my research group's contributions to this field. In our initial 2014 communication, we reported that the bis(imino)pyridine-supported compound (Ph2PPrPDI)Mn mediates ketone hydrosilylation with exceptional activity under solvent-free conditions. Silanes including Ph2SiH2, (EtO)3SiH, (EtO)2MeSiH, and (EtO)Me2SiH were found to partially reduce cyclohexanone in the presence of (Ph2PPrPDI)Mn, while turnover frequencies of up to 1280 min-1 were observed using PhSiH3. This led us to evaluate the hydrosilylation of 11 additional ketones and allowed for the atom-efficient preparation of tertiary and quaternary silanes. At that time, it was also discovered that (Ph2PPrPDI)Mn catalyzes the dihydrosilylation of esters (by way of acyl C-O bond hydrosilylation) to yield a mixture of silyl ethers with modest activity. Earlier this year, the scope of these transformations was extended to aldehydes and formates, and the observed hydrosilylation activities are among the highest obtained for any transition-metal catalyst. The effectiveness of three related catalysts has also been evaluated: (Ph2PPrPDI)MnH, (PyEtPDEA)Mn, and [(Ph2PEtPDI)Mn]2. To our surprise, (Ph2PPrPDI)MnH was found to exhibit higher carboxylate dihydrosilylation activity than (Ph2PPrPDI)Mn, while (PyEtPDEA)Mn demonstrated remarkable carbonyl hydrosilylation activity considering that it lacks a redox-active supporting ligand. The evaluation of [(Ph2PEtPDI)Mn]2 revealed competitive aldehyde hydrosilylation and formate dihydrosilylation turnover frequencies; however, this catalyst is significantly inhibited by pyridine and alkene donor groups. In our efforts to fully understand how (Ph2PPrPDI)Mn operates, a thorough electronic structure evaluation was conducted, and the ground-state doublet calculated for this compound was found to exhibit nonclassical features consistent with a low-spin Mn(II) center supported by a singlet PDI dianion and an intermediate-spin Mn(II) configuration featuring antiferromagnetic coupling to PDI diradical dianion. A comprehensive mechanistic investigation of (Ph2PPrPDI)Mn- and (Ph2PPrPDI)MnH-mediated hydrosilylation has revealed two operable pathways, a modified Ojima pathway that is more active for carbonyl hydrosilylation and an insertion pathway that is more effective for carboxylate reduction. Although these efforts represent a small fraction of the recent advances made in Mn catalysis, this work has proven to be influential for the development of Mn-based reduction catalysts and is likely to inform future efforts to develop Mn catalysts that can be used to prepare silicones.

Isolation of Mn(I) Compounds Featuring a Reduced Bis(imino)pyridine Chelate and Their Relevance to Electrocatalytic Hydrogen Production.

We report the preparation and electronic structure determination of chelate-reduced Mn(I) compounds that are relevant to electrocatalytic proton reduction mediated by [(Ph2PPrPDI)Mn(CO)][Br]. Reducing [(Ph2PPrPDI)Mn(CO)][Br] with excess Na-Hg afforded a neutral paramagnetic complex, (Ph2PPrPDI)Mn(CO). This compound was found to feature a low spin Mn(I) center and a PDI radical anion as determined by magnetic susceptibility measurement (1.97 µB), EPR spectroscopy ( S = 1/2), and density functional theory calculations. When [(Ph2PPrPDI)Mn(CO)][Br] was reduced with K-Hg, Mn(I) complexes with highly activated CO ligands were obtained. Recrystallization of the reduced product from diethyl ether solution allowed for the isolation of dimeric [(κ4-Ph2PPrPDI)Mn(µ-η1,η1,η2-CO)K(Et2O)]2 (νCO = 1710 cm-1, 1656 cm-1), while methyl tert-butyl ether treatment afforded dimeric [(κ4-Ph2PPrPDI)Mn(µ-η1,η1-CO)K(MTBE)2]2 (νCO = 1695 cm-1, MTBE = methyl tert-butyl ether). Addition of 18-crown-6 to these products, or conducting the K-Hg reduction of [(Ph2PPrPDI)Mn(CO)][Br] in the presence of 18-crown-6, allowed for the isolation of a monomeric example, (κ4-Ph2PPrPDI)Mn(µ-η1,η2-CO)K(18-crown-6) (νCO = 1697 cm-1). All three complexes were found to be diamagnetic and were characterized thoroughly by multinuclear 1D and 2D NMR spectroscopy and single crystal X-ray diffraction. Detailed analysis of the metrical parameters and spectroscopic properties suggest that all three compounds possess a Mn(I) center that is supported by a PDI dianion. Importantly, (κ4-Ph2PPrPDI)Mn(µ-η1,η2-CO)K(18-crown-6) was found to react instantaneously with either HBF4·OEt2 or HOTf to evolve H2 and generate the corresponding Mn(I) complex, [(Ph2PPrPDI)Mn(CO)][BF4] or [(Ph2PPrPDI)Mn(CO)][OTf], respectively. These products are spectroscopically and electrochemically similar to previously reported [(Ph2PPrPDI)Mn(CO)][Br]. It is believed that the mechanism of [(Ph2PPrPDI)Mn(CO)][Br]-mediated proton reduction involves intermediates that are related to the compounds described herein and that their ambient temperature isolation is aided by the redox active nature of Ph2PPrPDI.

Mechanistic Investigation of Bis(imino)pyridine Manganese Catalyzed Carbonyl and Carboxylate Hydrosilylation.

We recently reported a bis(imino)pyridine (or pyridine diimine, PDI) manganese precatalyst, (Ph2PPrPDI)Mn (1), that is active for the hydrosilylation of ketones and dihydrosilylation of esters. In this contribution, we reveal an expanded scope for 1-mediated hydrosilylation and propose two different mechanisms through which catalysis is achieved. Aldehyde hydrosilylation turnover frequencies (TOFs) of up to 4900 min-1 have been realized, the highest reported for first row metal-catalyzed carbonyl hydrosilylation. Additionally, 1 has been shown to mediate formate dihydrosilylation with leading TOFs of up to 330 min-1. Under stoichiometric and catalytic conditions, addition of PhSiH3 to (Ph2PPrPDI)Mn was found to result in partial conversion to a new diamagnetic hydride compound. Independent preparation of (Ph2PPrPDI)MnH (2) was achieved upon adding NaEt3BH to (Ph2PPrPDI)MnCl2 and single-crystal X-ray diffraction analysis revealed this complex to possess a capped trigonal bipyramidal solid-state geometry. When 2,2,2-trifluoroacetophenone was added to 1, radical transfer yielded (Ph2PPrPDI·)Mn(OC·(Ph)(CF3)) (3), which undergoes intermolecular C-C bond formation to produce the respective Mn(II) dimer, [(µ-O,Npy-4-OC(CF3)(Ph)-4-H-Ph2PPrPDI)Mn]2 (4). Upon finding 3 to be inefficient and 4 to be inactive, kinetic trials were conducted to elucidate the mechanisms of 1- and 2-mediated hydrosilylation. Varying the concentration of 1, substrate, and PhSiH3 revealed a first order dependence on each reagent. Furthermore, a kinetic isotope effect (KIE) of 2.2 ± 0.1 was observed for 1-catalyzed hydrosilylation of diisopropyl ketone, while a KIE of 4.2 ± 0.6 was determined using 2, suggesting 1 and 2 operate through different mechanisms. Although kinetic trials reveal 1 to be the more active precatalyst for carbonyl hydrosilylation, a concurrent 2-mediated pathway is more efficient for carboxylate hydrosilylation. Considering these observations, 1-catalyzed hydrosilylation is believed to proceed through a modified Ojima mechanism, while 2-mediated hydrosilylation occurs via insertion.

Conversion of Carbon Dioxide to Methanol Using a C-H Activated Bis(imino)pyridine Molybdenum Hydroboration Catalyst.

Using a multistep synthetic pathway, a bis(imino)pyridine (or pyridine diimine, PDI) molybdenum catalyst for the selective conversion of carbon dioxide into methanol has been developed. Starting from ((Ph2PPr)PDI)Mo(CO), I2 addition afforded [((Ph2PPr)PDI)MoI(CO)][I], which features a seven-coordinate Mo(II) center. Heating this complex to 100 °C under vacuum resulted in CO loss and the formation of [((Ph2PPr)PDI)MoI][I]. Reduction of [((Ph2PPr)PDI)MoI][I] in the presence of excess K/Hg yielded (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH following methylene group C-H activation at the α-position of one PDI imine substituent. The addition of CO2 to (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH resulted in facile insertion to generate the respective η(1)-formate complex, (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)Mo(OCOH). When low pressures of CO2 were added to solutions of (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH containing pinacolborane, the selective formation of H3COBPin and O(BPin)2 was observed along with precatalyst regeneration. When HBPin was limited, H2C(OBPin)2 was observed as an intermediate and (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)Mo(OCOH) remained present throughout CO2 reduction. The hydroboration of CO2 to H3COBPin was optimized and 97% HBPin utilization by 0.1 mol % (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH was demonstrated over 8 h at 90 °C, resulting in a methoxide formation turnover frequency (TOF) of 40.4 h(-1) (B-H utilization TOF = 121.2 h(-1)). Hydrolysis of the products and distillation at 65 °C allowed for MeOH isolation. The mechanism of (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH mediated CO2 hydroboration is presented in the context of these experimental observations. Notably, (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH is the first Mo hydroboration catalyst capable of converting CO2 to MeOH, and the importance of this study as it relates to previously described catalysts is discussed.

A Pentacoordinate Mn(II) Precatalyst That Exhibits Notable Aldehyde and Ketone Hydrosilylation Turnover Frequencies.

Heating (THF)2MnCl2 in the presence of the pyridine-substituted bis(imino)pyridine ligand, (PyEt)PDI, allowed preparation of the respective dihalide complex, ((PyEt)PDI)MnCl2. Reduction of this precursor using excess Na/Hg resulted in deprotonation of the chelate methyl groups to yield the bis(enamide)tris(pyridine)-supported product, (κ(5)-N,N,N,N,N-(PyEt)PDEA)Mn. This complex was characterized by single-crystal X-ray diffraction and found to possess an intermediate-spin (S = (3)/2) Mn(II) center by the Evans method and electron paramagnetic resonance spectroscopy. Furthermore, (κ(5)-N,N,N,N,N-(PyEt)PDEA)Mn was determined to be an effective precatalyst for the hydrosilylation of aldehydes and ketones, exhibiting turnover frequencies of up to 2475 min(-1) when employed under solvent-free conditions. This optimization allowed for isolation of the respective alcohols and, in two cases, the partially reacted silyl ethers, PhSiH(OR)2 [R = Cy and CH(Me)((n)Bu)]. The aldehyde hydrosilylation activity observed for (κ(5)-N,N,N,N,N-(PyEt)PDEA)Mn renders it one of the most efficient first-row transition metal catalysts for this transformation reported to date.

Carbon Dioxide Promoted H(+) Reduction Using a Bis(imino)pyridine Manganese Electrocatalyst.

Heating a 1:1 mixture of (CO)5MnBr and the phosphine-substituted pyridine diimine ligand, (Ph2PPr)PDI, in THF at 65 °C for 24 h afforded the diamagnetic complex [((Ph2PPr)PDI)Mn(CO)][Br] (1). Higher temperatures and longer reaction times resulted in bromide displacement of the remaining carbonyl ligand and the formation of paramagnetic ((Ph2PPr)PDI)MnBr (2). The molecular structure of 1 was determined by single crystal X-ray diffraction, and density functional theory (DFT) calculations indicate that this complex is best described as low-spin Mn(I) bound to a neutral (Ph2PPr)PDI chelating ligand. The redox properties of 1 and 2 were investigated by cyclic voltammetry (CV), and each complex was tested for electrocatalytic activity in the presence of both CO2 and Brønsted acids. Although electrocatalytic response was not observed when CO2, H2O, or MeOH was added to 1 individually, the addition of H2O or MeOH to CO2-saturated acetonitrile solutions of 1 afforded voltammetric responses featuring increased current density as a function of proton source concentration (icat/ip up to 2.4 for H2O or 4.2 for MeOH at scan rates of 0.1 V/s). Bulk electrolysis using 5 mM 1 and 1.05 M MeOH in acetonitrile at -2.2 V vs Fc(+/0) over the course of 47 min gave H2 as the only detectable product with a Faradaic efficiency of 96.7%. Electrochemical experiments indicate that CO2 promotes 1-mediated H2 production by lowering apparent pH. While evaluating 2 for electrocatalytic activity, this complex was found to decompose rapidly in the presence of acid. Although modest H(+) reduction activity was realized, the experiments described herein indicate that care must be taken when evaluating Mn complexes for electrocatalytic CO2 reduction.

A highly active manganese precatalyst for the hydrosilylation of ketones and esters.

The reduction of ((Ph2PPr)PDI)MnCl2 allowed the preparation of the formally zerovalent complex, ((Ph2PPr)PDI)Mn, which features a pentadentate bis(imino)pyridine chelate. This complex is a highly active precatalyst for the hydrosilylation of ketones, exhibiting TOFs of up to 76,800 h(-1) in the absence of solvent. Loadings as low as 0.01 mol % were employed, and ((Ph2PPr)PDI)Mn was found to mediate the atom-efficient utilization of Si-H bonds to form quaternary silane products. ((Ph2PPr)PDI)Mn was also shown to catalyze the dihydrosilylation of esters following cleavage of the substrate acyl C-O bond. Electronic structure investigation of ((Ph2PPr)PDI)Mn revealed that this complex possesses an unpaired electron on the metal center, rendering it likely that catalysis takes place following electron transfer to the incoming carbonyl substituent.

Preparation and hydrosilylation activity of a molybdenum carbonyl complex that features a pentadentate bis(imino)pyridine ligand.

Attempts to prepare low-valent molybdenum complexes that feature a pentadentate 2,6-bis(imino)pyridine (or pyridine diimine, PDI) chelate allowed for the isolation of two different products. Refluxing Mo(CO)6 with the pyridine-substituted PDI ligand, (PyEt)PDI, resulted in carbonyl ligand substitution and formation of the respective bis(ligand) compound ((PyEt)PDI)2Mo (1). This complex was investigated by single-crystal X-ray diffraction, and density functional theory calculations indicated that 1 possesses a Mo(0) center that back-bonds into the π*-orbitals of the unreduced PDI ligands. Heating an equimolar solution of Mo(CO)6 and the phosphine-substituted PDI ligand, (Ph2PPr)PDI, to 120 °C allowed for the preparation of ((Ph2PPr)PDI)Mo(CO) (2), which is supported by a κ(5)-N,N,N,P,P-(Ph2PPr)PDI chelate. Notably, 1 and 2 have been found to catalyze the hydrosilylation of benzaldehyde at 90 °C, and the optimization of 2-catalyzed aldehyde hydrosilylation at this temperature afforded turnover frequencies of up to 330 h(-1). Considering additional experimental observations, the potential mechanism of 2-mediated carbonyl hydrosilylation is discussed.

Manganese catalysed dehydrocoupling of silanes and siloxanes with ammonia to prepare oligosilazanes and polysiloxazanes.

The halogen-free synthesis of oligosilazanes has been observed upon dehydrocoupling silanes with ammonia at 25 °C using [(2,6-iPr2PhBDI)Mn(µ-H)]2. Extending this methodology to polymethylhydrosiloxanes afforded thermally robust polysiloxazane solids, and the dehydrocoupling of 1,3,5,7-tetramethylcyclotetrasiloxane with ammonia afforded a polysiloxazane having a weight-average molecular weight of 4300 g mol-1. A representative oligosilazane has been applied to a copper surface and found to afford a 20 µm thick coating that resists corrosion after 24 h under water. Addition of ammonia to [(2,6-iPr2PhBDI)Mn(µ-H)]2 allowed for characterization of the catalyst resting state, [(2,6-iPr2PhBDI)Mn(µ-NH2)]2, which has been found to mediate Si-N dehydrocoupling.

Sustainable preparation of aminosilane monomers, oligomers, and polymers through Si-N dehydrocoupling catalysis.

This article covers historical and recent efforts to catalyse the dehydrocoupling of amines and silanes, a direct method for Si-N bond formation that offers hydrogen as a byproduct. In some applications, this transformation can be used as a sustainable replacement for traditional aminosilane synthesis, which demands corrosive chlorosilanes while generating one equivalent of ammonium salt waste for each Si-N bond that is formed. These advantages have driven the development of Si-N dehydrocoupling catalysts that span the periodic table, affording mechanistic insight that has led to advances in efficiency and selectivity. Given the divergence in precursors being used, characterization methods being relied on, and applications being targeted, this article highlights the formation of monomeric aminosilanes separately from oligomeric and polymeric aminosilanes. A recent study that allowed for the manganese catalysed synthesis of perhydropolysilazane and commercial chemical vapor deposition precursors is featured, and key opportunities for advancing the field of Si-N dehydrocoupling catalysis are discussed.

An aryl diimine cobalt(I) catalyst for carbonyl hydrosilylation.

Through the application of a redox-innocent aryl diimine chelate, the discovery and utilization of a cobalt catalyst, (Ph2PPrADI)Co, that exhibits carbonyl hydrosilylation turnover frequencies of up to 330 s-1 is described. This activity is believed to be the highest ever reported for metal-catalyzed carbonyl hydrosilylation.

Phosphorous-substituted redox-active ligands in base metal hydrosilylation catalysis.

This article highlights the utilization of phosphine-containing redox-active ligands for efficient hydrosilylation catalysis. Manganese, iron, cobalt, and nickel precatalysts featuring these chelates have been described and leading activities for carbonyl, carboxylate, and ester C-O bond hydrosilylation have been achieved. Mechanistic studies have provided insight into the importance of phosphine hemilability.

Spectroscopic characterization of alumina-supported bis(allyl)iridium complexes: site-isolation, reactivity, and decomposition studies.

The covalent attachment of tris(allyl)iridium to partially dehydroxylated gamma-alumina is found to proceed via surface hydroxyl group protonation of one allyl ligand to form an immobilized bis(allyl)iridium moiety, (=AlO)Ir(allyl)(2), as characterized by CP-MAS (13)C NMR, inductively coupled plasma-mass spectrometry, and Ir L(3) edge X-ray absorption spectroscopy. Extended X-ray absorption fine-structure (EXAFS) measurements taken on unsupported Ir(allyl)(3) and several associated tertiary phosphine addition complexes suggest that the eta(3)-allyl ligands generally account for an Ir-C coordination number of 2 rather than 3, with an average Ir-C distance of 2.16 A. Using this knowledge, combined EXAFS and X-ray absorption near-edge structure studies reveal that a small amount of Ir(0) is also formed upon reaction of Ir(allyl)(3) with the surface. It was found that the addition of either 2,6-dimethylphenyl isocyanide or carbon monoxide to the supported complex allows spectroscopic identification of the supported bis(allyl)iridium complexes, (=AlO)Ir(allyl)(2)(CNAr) [Ar = 2,6-(CH(3))(2)C(6)H(4)] and (=AlO)Ir(allyl)(2)(CO)(2), respectively. Although samples of the supported bis(allyl)iridium complex are active for the dehydrogenation of cyclohexane to benzene at temperatures between 180 and 220 degrees C, in situ temperature-programmed reaction XAFS and continuous-flow reactor studies suggest that Ir(0) nanoparticles, rather than a well-defined Ir(3+) complex, are responsible for the observed activity.

Solution and Solid-State Characterization of PbSe Precursors.

The addition of lead to diphenyl diselenide in ethylenediamine (en) or pyridine (py) allowed for the observation of the solvento complexes, (en)Pb(SePh)2 or (py)2Pb(SePh)2, respectively. Performing this reaction in dimethyl sulfoxide and subsequent crystallization was found to afford Pb(SePh)2. Inductively coupled plasma optical emission spectroscopy revealed a 1:2 lead to selenium ratio for all three complexes. Nuclear magnetic resonance spectroscopy confirms that Pb(SePh)2 is readily solubilized by ethylenediamine, and electrospray ionization mass spectrometry supports the presence of Pb(SePh)2 moieties in solution. Single-crystal X-ray diffraction analysis of the pyridine adduct, (py)2Pb(SePh)2, revealed a seesaw molecular geometry featuring equatorial phenylselenolate ligands. Crystals of Pb(SePh)2 grown from dimethyl sulfoxide revealed one-dimensional polymeric chains of Pb(SePh)2. We believe that the lead(II) phenylselenolate complexes form via an oxidative addition reaction.

Scope and mechanism of nitrile dihydroboration mediated by a ß-diketiminate manganese hydride catalyst.

The manganese hydride dimer, [(2,6-iPr2PhBDI)Mn(µ-H)]2, was found to mediate nitrile dihydroboration, rendering it the first manganese catalyst for this transformation. Stoichiometric experiments revealed that benzonitrile insertion affords [(2,6-iPr2PhBDI)Mn(µ-NCHC6H5)]2 en route to N,N-diborylamine formation. Density functional theory calculations reveal the precise mechanism and demonstrate that catalysis is promoted by monomeric species.