Development of the headspace gas chromatography-tandem mass spectrometry method for ethylene oxide and ethylene chlorohydrin residue in medical devices.

RATIONALE: Ethylene oxide (EO) sterilization is commonly employed for the sterilization of medical devices and has a very high market share. However, EO and its metabolite ethylene chlorohydrin (ECH) are toxic to humans. In compliance with the classification and residue limits of medical devices defined by ISO 10993-7, our study established two extraction methods for the testing of EO and ECH. METHODS: The first method involves simulated-use extraction using water as the extraction solvent. While the second, exhaustive extraction, directly extracts sample through headspace sampling analysis. Gas chromatography-tandem mass spectrometry in multiple reaction monitoring mode was utilized, requiring only 16 min. Then, the developed method was applied to assess 10 commercially available medical devices sterilized by EO. RESULTS: In simulated-use extraction, calibration curves were evaluated in the range of 1-100 and 5-500 µg for EO and ECH, respectively (r > 0.999). Inter-day recoveries ranged from 85.0% to 95.2% and from 94.8% to 102.4%. In exhaustive extraction, calibration curves spanned 0.5-50 and 2-200 µg for EO and ECH, respectively (r > 0.999). Inter-day recoveries ranged from 101.6% to 102.1% for EO and from 98.1% to 102.2% for ECH. After analysis of the 10 commercially available medical devices, two cotton swabs were found to have ECH of 35.1 and 28.4 µg per device, and four medical devices were found to have EO with concentration below the limit of quantification. Meanwhile, we found that the EO internal standard (propylene oxide) recommended by ISO 10993-7 had interference problems with other similar substances and was not suitable as an internal standard for EO. CONCLUSIONS: This study offers a sensitive and straightforward analytical approach to EO and ECH residues in a variety of medical devices. In addition, the results show that the EO or ECH content of these types of medical devices in our study falls below the regulatory limits, therefore instilling confidence among consumers regarding their safe use.

Determination of perfluoroalkyl substances in food packaging in Taiwan using ultrasonic extraction and ultra-performance liquid chromatography/tandem mass spectrometry.

Perfluoroalkyl substances (PFASs), as coating materials, possess oil-resistant and waterproof properties. However, their persistency and toxicity have caused concerns. This study developed a method for determining five types of 20 PFASs with ultra-performance liquid chromatography/tandem mass spectrometry, and measured seven categories of 32 commercial samples of oil-resistant food packaging in Taiwan. The assay was validated according to the specification of Taiwan Food and Drug Administration (TFDA). Samples of 100 cm2 were cut into pieces and were ultra-sonicated in 20-mL methanol at 50 °C for 45 minutes. The extracts were concentrated to 1 mL for instrumental analysis. Most matrix effect factors and extraction efficiencies of the analytes were 50%-80% and 52%-99%, respectively. Most limits of detection and limits of quantification were between 0.07-11.3 ng/dm2 and 0.17-18.3 ng/dm2, respectively. Most recoveries ranged from 70% to 117% at three tested levels, and the precisions (%RSD) were lower than 19%. Microwave popcorn paper contained more types and higher levels of PFASs than other packaging, with perfluoroalkyl acids at 8.3-1960 ng/dm2 and fluorotelomer alcohols (FTOHs) at 9.7-7188 ng/dm2. High concentrations of FTOHs were also observed in one oil-proof paper bag at 454-2595 ng/dm2 and in one French fries paper bag at 22.4-167 ng/dm2.

Evaluation and optimization of a HS-SPME-assisted GC-MS/MS method for monitoring nitrosamine impurities in diverse pharmaceuticals.

The probable carcinogenic nitrosamine impurities, such as N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA), have been detected from various pharmaceuticals in recent years. The sensitive chromatographic methods, including liquid chromatography (LC) and gas chromatography (GC), have been applied for analyzing nitrosamines in the pharmaceutical substrates, such as sartans, ranitidine and metformin. In comparison of LC, the efficacy of GC for analyzing multiple nitrosamines in diverse pharmaceuticals will be limited or attenuated owing to the chemical properties of target analytes or matrix hinderance of pharmaceutical substrates. To extend the applicability of GC analysis for multiple nitrosamines in pharmaceuticals, this study presented a gas chromatograph tandem mass (GC-MS/MS) method for monitoring 14 nitrosamines within 44 pharmaceuticals, whereas the headspace-solid phase microextraction (HS-SPME) sampling mode was introduced. Chromatographic separation was achieved on a DB-heavyWax column (30 m × 0.25 mm; i.d., 0.25 µm), whereas the HS-SPME sampling mode with a 50/30 µm DVB/CAR/PDMS extracting fiber was applied for comparison of the direct injection mode. Meanwhile, the HS-SPME conditions were optimized to evaluate the effects of the parameters on analyzing total nitrosamines in pharmaceuticals by GC-MS/MS. The optimal conditions of HS-SPME were as follows: extracting solution of 90% NaCl, HS incubation time 1 min, SPME adsorbing at 80 â„ƒ for 30 min, and desorbing at 250 â„ƒ for 5 min. The limit of quantification (LOQ) for 14 nitrosamines in pharmaceutical matrices under the optimal conditions was 0.05 µg/g for the optimal HS-SPME, whereas the value was 0.05-0.25 µg/g for direct injection.

Inorganic arsenic speciation analysis in food using HPLC/ICP-MS: Method development and validation.

Arsenic (As) compounds can be classified as organic or inorganic, with inorganic arsenic (iAs) having significantly higher toxicity than organic As. As may accumulate in food materials that have been exposed to As-contaminated environments. Thus, the "Sanitation Standard for Contaminants and Toxins in Foods" published by the Ministry of Health and Welfare set the standard limits for iAs content in rice, seaweed, seafood, and marine oils to safeguard public health. Therefore, a robust analytical method must be developed to selectively and quantitatively determine iAs content in rice, seaweed, seafood, and marine oils. Herein, we reported and verified the method of combined high-performance liquid chromatography/inductively coupled plasma-mass spectrometry (HPLC/ICP-MS) to determine iAs content in a wide variety of food. The fish oil samples were spiked with different concentrations of the As(III) standard solution, and their iAs analyzes were obtained via extraction procedures using the 1% (w/w) nitric acid (HNO3) solution containing 0.2 M hydrogen peroxide (H2O2) under sonication. The extracts were subsequently analyzed for their As(V) contents using HPLC/ICP-MS with aqueous ammonium carbonate as the mobile phase. The As(III) species had completely oxidized into the As(V) species, which prevented interferences between organic and iAs during chromatography. The method showed good extraction efficiencies (generally >90%) for the iAs samples, and their limits of quantification in fish oil were 0.02 mg/kg. The method was verified via the iAs speciation analytes of rice, seaweed, seafood, and marine oil matrices. The average recoveries for the fortified samples of each matrix ranged from 87.5 to 112.4%, with their coefficients of variation being less than 10%. Surveillance studies were conducted on the iAs contents of food samples purchased from local Taiwanese markets. The results showed that the only Hijiki (Sargassum fusiforme) higher than the maximum limit of the sanitation standard for iAs in seaweed, whereas the remaining samples met their corresponding requirements. This method is quick and straightforward, and it can be applied for the routine analysis of iAs content in a wide variety of food products to ensure public health safety.

Stable carbon isotopic characterization of rice vinegar protein as an intrinsic reference for discriminating the authenticity of brewed rice vinegar.

Rice vinegar plays an important role in daily life. However, some unscrupulous manufacturers may deliberately add synthetic acetic acid in vinegar products to reduce fermentation time and save production costs. To protect the rights and health of consumers, vinegar authenticity must be controlled. The rice vinegar protein was used as an intrinsic reference and its stable carbon isotope ratio (δ13Cprotein) was analyzed by elemental analyzer-isotope ratio mass spectrometry. The stable carbon isotope ratio difference between the acetic acid and the rice vinegar protein (Δδ13Cacetic acid-protein) was calculated to evaluate vinegar authenticity. Sixteen rice vinegar samples were analyzed and a stable carbon isotopic pattern of rice vinegar was established by the 95% confidence interval for Δδ13Cacetic acid-protein (0.27‰-2.10‰). An acetic acid adulteration curve of Δδ13Cacetic acid-protein was also assumed according to the data from rice vinegar samples, and its validity was confirmed by rice vinegar deliberately blended with acetic acid at different ratios (25, 50, and 75%). The Δδ13Cacetic acid-protein values of the adulterated vinegars decreased with increasing amounts blended acetic acid, but the δ13Cprotein values did not, showing that rice vinegar protein could be used as an intrinsic reference for identifying the adulterated rice vinegar. The rice vinegar adulterated with acetic acid at higher than approximately 10% could be detected.

Comprehensive detection of 120 additives in food using nontargeted MS data acquisition.

The compliance assessment on the labeling of food additives is a hard job, because there are nearly thousand legal food additives can be used in food, and countless illegal additives must also deal with. This study developed a non-targeted data acquisition screening method based on liquid chromatography high resolution mass spectrometry (HRMS) in which a precursor ion and two product ions of each analyte are able to be recorded. The high throughput screening method worked as foodomics that characterized and identified every food components as long as they were ionized in terms of theory. The data acquisition method called data independent acquisition (DIA) was achieved by a full scan form m/z 70-1050, and then followed wide window fragmentations of product ions recording. A full scan and the followed fragmentations generated 21 spectra in 2.6 s contributed about 6 data points for a typical 0.2-0.3 min width peak in HPLC. A detection database list of 120 additives included 79 colorants, 13 sweeteners, 12 preservatives and 7 antioxidants was established. Thirty-three commercial samples including beverages, candies, and sauces were surveyed for testing additives. Sweeteners (rebaudioside A) and flavoring agents (malic acid and fumaric acid) were found the most under declared additives. HPLC column often do not provide adequate retention for highly polar compounds such as organic acids (flavoring agents). In this study they were coeluted, but were able to be separated and determined by HRMS worked as the secondary separation tool. The surveillance results showed there is still room for food manufacturers to improve the connection between their product information and consumers.

Determination of cannabinoids in hemp oil based cosmetic products by LC-tandem MS.

Cosmetic products containing hemp seed oil as permitted raw materials required the specific compound delta-9-tetrahydrocannabinol (THC) below 10 µg/g. THC was the main psychoactive constituent of cannabis. Since hemp seed oil became an increasingly popular ingredient in cosmetics over the last few years, an efficient and reliable analytical method for THC and other cannabinoids in cannabis-infused cosmetic products was in need. A liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the determination of delta-9-tetrahydrocannabinol (THC), cannabidiol (CBD), and cannabinol (CBN) in hemp seed oil based cosmetic products was developed. Method validation was performed by fertilizing blank samples with analytes and internal standards (THC-d3, CBD-d3, and CBN-d3). Chromatographic method utilized a Xbridge BEH Shield RP18 column with gradient elution containing 10 mM ammonium formate in water and methanol provided successful separation of THC, CBD, and CBN in cosmetic matrix. The combination of MS detection in positive electrospray ionization (ESI) and multiple reaction monitoring (MRM) mode offered rapid run time 13 minutes with limit of quantification (LOQ) of 0.05 µg/g. The intra- and inter-day recoveries were 79.23-114.04% and 83.55-111.61% with spiking levels ranged between 0.05 µg/g and 0.5 µg/g, respectively. Surveillance results of 90 cosmetic products showed 22, 34, and 5 products containing THC (0.06-1777 µg/g), CBD (0.47-37217 µg/g), and CBN (2.2-25.2 µg/g), respectively. This validated method offered accurate, reliable, and fast way for the determination of drug contaminations including THC, CBD, and CBN in cosmetics. The surveillance results for commercial cosmetic products purchased in Taiwan between 2018-2020 provided valuable background references for THC, CBD, and CBN in hemp seed oil based cosmetic products, and could be used for administration purpose.

Simultaneous LC-MS/MS screening for multiple phenethylamine-type conventional drugs and new psychoactive substances in urine.

New psychoactive substances are being launched in the drug market at a rapidly growing pace. More than 950 new psychoactive substances have been reported to the United Nations Office on Drugs and Crime. The development of new psychoactive substance abuse has drawn risks on public health and safety. Phenethylamines, along with other stimulants, accounted for the majority of the new psychoactive substances being reported in the past decade. This study presents a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the simultaneous screening of 74 conventional and artificial phenethylamines in urine samples. The chromatographic analysis was performed by a direct dilute-and-shoot procedure using a Phenomenex Kinetex® Phenyl-Hexyl column (10 cm × 2.1 mm i.d., 1.7 µm) and two mobile phases (A: 0.1% formic acid aqueous solution with 5 mM ammonium acetate, B: 0.1% formic acid methanolic solution). The mass fragments were collected under the multiple reaction monitoring mode. The linearity range located in 1.0-50.0 ng/mL for quantitative analysis. The limit of detection and lower limit of quantification for 74 phenethylamines were 0.5 ng/mL and 1.0 ng/mL, respectively. The method was validated and further applied to analyze authentic urine samples. Twenty samples were tested positive of seven phenethylamines from 67 samples, whereas the contents detected were 9.8 ng/mL to 147.1 µg/mL with dilution factors of 40 to 20,000 folds.

Development of the species-specific multiplex PCR and DNA sequencing methods for rapid authentication of Isatidis Folium and its adulterants.

Isatis indigotica Fort. (family Cruciferae), is an herb widely used in traditional herbal medicine and its dried leave was named "ISATIDIS FOLIUM". Baphicacanthus cusia (Ness) Bremek. and Polygonum tinctorium Ait. are commonly misused as ISATIDIS FOLIUM in Chinese Medicine pharmacy. For the purpose of being not misused, specific primers based on the sequence difference of chloroplast trnH-psbA intergenic spacer were designed and multiplex polymerase chain reaction method (multiplex PCR) was developed. In this study, 29 original herbal materials were analyzed and our results show that DNA size after multiplex PCR was able to distinguish variations between three herbs. DNA fragments of 464, 297, 170 base pairs (bps) were represented for I. indigotica and B. cusia and P. tinctorium, respectively. In conclusion, our investigations demonstrate that molecular identification method provides more accurate results for medicinal plants detection and good quality control of ISATIDIS FOLIUM.

A LC-MS/MS method for determination of 73 synthetic cathinones and related metabolites in urine.

Synthetic cathinones, which are a group of ß-keto analogs of phenethylamine, have been reported as the most emerging new psychoactive substances in the past decade. The quantity and variety of synthetic cathinones have continued to increase, which poses considerable risks to public health and social security. In this study, an analytical method based on liquid chromatography-tandem mass spectrometry (LCMS/MS) was established for the simultaneous determination of 73 synthetic cathinones and related metabolites in urine. The chromatographic analysis was performed using a Kinetex® Biphenyl column (10 cm ×2.1 mm, 1.7 µm), applying a gradient mobile phase, comprising 0.1 % formic acid aqueous solution with 5 mM ammonium acetate and 0.1 % formic acid methanolic solution; the entire run time of the analysis was within 8 min. The multiple reaction monitoring (MRM) mode was employed to collect the monitoring and quantitative ion pairs. Intra-day/inter-day precision and accuracy were less than 10 % for all the studied analytes. The limits of detection and quantification for all the analytes were 0.1-0.5 ng/mL and 0.5-1.0 ng/mL, respectively. The matrix effect was satisfactory for all the analytes, with a deviation lower than 20 %. The present method was further applied to 67 authentic urine samples in which 13 different synthetic cathinones were detected from 32 positive samples. The abuse of poly-synthetic cathinones was examined that up to seven items was detected in one case from authentic samples in this study.

Simultaneous Analysis of the Stable Carbon Isotope Ratios of Acetoin and Acetic Acid by GC-C-IRMS for Adulteration Detection in Brewed Rice Vinegar Products.

In this study, we developed a method to simultaneously measure the stable carbon isotope ratio for acetic acid (δ 13Cacetic acid) and acetoin (δ13Cacetoin) in rice vinegar by gas chromatography-combustion-isotope ratio mass spectrometry. The method showed good precision and accuracy. With this method, data from 16 brewed rice vinegars and 10 acetic acid samples were used to evaluate the feasibility of adulteration detection. On the basis that all δ13Cacetoin values of brewed rice vinegars are nearly constant, a characteristic pattern of the stable carbon isotope in rice vinegar was built with the 95% confidence intervals for δ13Cacetic acid (-26.97 to -25.38‰), δ13Cacetoin (-28.14 to -27.09‰), and Δδ13C (0.61 to 2.27‰). An adulteration detection curve of Δδ13C was proposed based on the results of vinegar and acetic acid samples and confirmed by vinegar spiked with different amounts of acetic acid. This method could be useful in estimating the blending ratio of adulterated rice vinegar products. Products containing more than 10% of synthetic acetic acid could be possibly identified.

A multi-analyte LC-MS/MS method for screening and quantification of nitrosamines in sartans.

An incident of sartan medicine contamination was notified by Europe in June 2018. The contaminant was identified as a probable carcinogenic nitrosamine and the recalls of sartan medicines were soon made. Since then, more nitrosamine contaminants in sartan medicines were reported. To broaden the applicability and variety in nitrosamine determination, a multi-analyte method is required. In this study, a feasible and sensitive multi-analyte LC-MS/MS method for determination of 12 nitrosamines in sartans was established, where the active pharmaceutical ingredients and final products merchandised in Taiwan were also examined. Chromatographic separation was achieved on an Xselect® HSS T3 column (15 cm × 3 mm i.d., 3.5 µm) with gradient elution using mobile phase A consisting of 0.1% formic acid in water and mobile phase B consisting of 0.1% formic acid in acetonitrile/methanol (2:8). Validation of the proposed method was also carried out. The limit of detection and limit of quantification for 12 nitrosamines were 20 ng/g and 50 ng/g, respectively. The intra-day and inter-day recoveries of nitrosamines were among 80-120% with precision of 20% for most nitrosamines within sartans matrices. The method was successfully established and applied to authentic samples which a total of 98 positive samples containing 5 distinct nitrosamines, including N-nitrosodiethylamine, N-nitrosodimethylamine, N-nitroso-N-methyl-4-aminobutyric acid, N-nitrosomorpholine and N-nitrosopiperidine, were detected from 557 authentic samples.

Determination of polycyclic aromatic hydrocarbons (PAHs) in cosmetic products by gas chromatography-tandem mass spectrometry.

A gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) method is developed to determine 18 representative polycyclic aromatic hydrocarbons (PAHs) in cosmetics, including Benzo[a]pyrene (BaP) and others. The method offers high sensitivity and selectivity under selected reaction monitoring (SRM) mode to satisfy the requirements of both quantitation and qualitation. The extraction solvent system used in this study is acetone/hexane 1:1 (v/v) and other purification procedure is unnecessary. The linearities of 18 PAHs are validated in different concentration in the range of 0.25-20 ng/mL individually with coefficient correlation (r) higher than 0.996. The recoveries for spiking 3 different concentrations are from 87.40% to 120.44% for 18 PAHs and the coefficient of variation (CV) are below 12.32%. Limit of quantification (LOQ) of 18 PAHs is in the range of 0.05-0.2 mg/kg. A matrix enhancement effect is observed and can be compensated with deuterated internal standard. The method has been successfully applied to 73 samples, over 40 of them are lipsticks. The results show none of the samples detect Benzo[a]pyrene (BaP) and Dibenzo[a,h]anthracene (DBA), both are classified as the most carcinogenic. 8 PAHs are detected and the average value between 0.08 and 0.27 mg/kg. This study offers a sensitive and simple method to analyze 18 representative PAHs successfully and can be applied to cosmetic products and raw materials.

Multi-residue analysis using liquid chromatography tandem mass spectrometry for detection of 20 coccidiostats in poultry, livestock, and aquatic tissues.

In this study, we developed a novel analysis method based on liquid chromatography/tandem mass spectrometry (LC-MS/MS) to allow the simultaneous identification of 20 coccidiostats in eight matrix categories, including the muscles of chicken, swine, cow, and fish as well as chicken eggs, bovine milk, and porcine viscera. In the pretreatment procedure, acetonitrile/methanol (95:5, v/v) containing 1% formic acid, 5 g of sodium acetate, and 6.0 g of anhydrous magnesium sulfate was used for extraction, followed by a clean-up procedure using n-hexane saturated with ACN to facilitate the elimination of analytes from high lipid samples. Chromatographic separations were achieved using a Poroshell 120SB C18 column and operated with a gradient mobile phase system consisting of methanol (with 0.1% formic acid) and 5 mM ammonium formate, and the MS detection was monitored simultaneously. The method was validated in accordance with the Guidelines for the Validation of Food Chemical Methods by the Taiwan Food and Drug Administration. The limit of quantitation among 8 matrices were 0.5-2 ng g-1. The proposed method proved highly effective in detecting the presence of targeted veterinary drugs, providing a high degree of precision and accuracy over a broad range of matrices.

Identification of 3-MCPD esters to verify the adulteration of extra virgin olive oil.

The adulteration of olive oil is an important issue around the world. This paper reports an indirect method by which to identify 3-monochloropropane-1,2-diol (3-MCPD) esters in olive oils. Following sample preparation, the samples were spiked with 1,2-bis-palmitoyl-3-chloropropanediol standard for analysis using gas chromatograph-tandem mass spectrometry. The total recovery ranged from 102.8% to 105.5%, the coefficient of variation ranged from 1.1% to 10.1%, and the limit of quantification was 0.125 mg/kg. The content of 3-MCPD esters in samples of refined olive oil (0.97-20.53 mg/kg) exceeded those of extra virgin olive oil (non-detected to 0.24 mg/kg). These results indicate that the oil refining process increased the content of 3-MCPD esters, which means that they could be used as a target compound for the differentiation of extra virgin olive oil from refined olive oil in order to prevent adulteration.

Identification and quantification of Cu-chlorophyll adulteration of edible oils.

Cu-pyropheophytin a, the major Cu-pigment of Cu-chlorophyll, was determined in edible oil by high-resolution mass spectrometry with a high-performance liquid chromatography-quadrupole (HPLC-Q)-Orbitrap system and by HPLC coupled with a photodiode-array detector. Respective limit of detection and limit of quantification levels of 0.02 µg/g and 0.05 µg/g were obtained. Twenty-nine commercial oil products marked as olive oil, grapeseed oil and blended oil, all sourced directly from a food company that committed adulteration with Cu-chlorophyll, were investigated. In this company, four green dyes illegally used in oils were seized during factory investigation by the health authorities. The food additive Cu-pyropheophytin a was found in all confiscated samples in concentrations between 0.02 and 0.39 µg/g. Survey results of another 235 commercial oil samples manufactured from other companies, including olive pomace oil, extra virgin olive oil, olive oil, grapeseed oil and blended oil, indicated high positive incidences of 63%, 39%, 44%, 97% and 8%, respectively, with a concentration range between 0.02 and 0.54 µg/g. High Cu-chlorophyll concentrations are indications for fraudulent adulteration of oils.

Effective extraction method through alkaline hydrolysis for the detection of starch maleate in foods.

A high-performance liquid chromatography (HPLC) method was developed for the determination of maleic acid which was released from starch maleate (SM) through the alkaline hydrolysis reaction. The proper alkaline hydrolysis conditions and LC separation are reported in this study. The starch samples were treated with 50% methanol for 30 minutes, and then hydrolyzed by 0.5N KOH for 2 hours to release maleic acid. A C18 column and gradient mobile phase consisting of 0.1% phosphoric acid and methanol at a flow rate of 1.0 mL/minute were used for separation. The method showed a good linearity in the range of 0.01-1.0 ìg/mL, with a limit of quantification (LOQ) at 10 mg/kg in starch. The recoveries in corn starch, noodle, and fish balls were between 93.9% and 108.4%. The relative standard deviation (RSD) of precision was <4.9% (n = 3). This valid method was rapid, sensitive, precise, and suitable for routine monitoring of the illegal adulteration of SM in foods.

Simultaneous quantification of glyphosate, glufosinate, and their major metabolites in rice and soybean sprouts by gas chromatography with pulsed flame photometric detector.

Procedures were developed for the simultaneous determination of glyphosate [N-(phosphonomethyl)glycine] and glufosinate [dl-homoalanin-4-yl-(methyl)phosphinic acid] and their major metabolites, aminomethylphosphonic acid (AMPA) and 3-(methylphosphinico)propionic acid (3-MPPA), in rice and soybean sprouts by gas chromatography (GC) equipped with a pulsed flame photometric detector (PFPD). Herbicides and their major metabolites were previously derivatized with TMOA (trimethyl orthoacetate (TMOA) in the presence of acetic acid, and their GC responses versus heating temperature (70-90 degrees C) and heating time (30-120 min) were optimized. It was found that increases in heating temperature and heating time were unfavorable for the derivatization of glyphosate or glufosinate, whereas high temperature and extended reaction time remarkably facilitated that of AMPA and 3-MPPA except at 90 degrees C for an extended reaction time (120 min). Combination of AG1-X8 anion-exchange chromatography with a Florisil cartridge cleanup process was favorable for the GC-PFPD analysis. Four types of derivatives spiked in rice and soybean sprout matrices were eluted, reaching a baseline separation, in a sequence of 3-MPPA, AMPA, glyphosate, and glufosinate within 14 min using a DB-608 capillary column. Recoveries of glyphosate, AMPA, glufosinate, and 3-MPPA (0.5 ppm) spiked in both sample matrices were determined to be 72-81, 71-86, 101-119, and 83-90%, respectively, whereas the coefficient of variation was determined to be <10% in three repeated determinations. The instrumental limits of detection for glyphosate, AMPA, glufosinate, and 3-MPPA in sample matrices were 0.02, 0.03, 0.02, and 0.01 ppm, respectively. The limits of quantification for glyphosate, AMPA, glufosinate, and 3-MPPA in sample matrices were 0.06, 0.10, 0.06, and 0.04 ppm, respectively.