Miniaturized inkjet-printed flexible ion-selective sensing electrodes with the addition of graphene in PVC layer for fast response real-time monitoring applications.

In this letter, we propose a miniaturization scheme of inkjet printed ionic sensing electrodes by adding graphene into the ion-selective PVC film not only to reduce the impedance of the ionic liquid layer of the electrode but also to increase the electrode capacitance for the reduction of the response time. Based on the scheme, we present a fully inkjet-printed electrochemical ion-selective sensor comprising a working electrode and reference electrode, which are inkjet-printed Ag NPs/PEDOT:PSS-graphene/PVC-graphene and Ag/AgCl(s)/ionic liquid PVC-graphene layer structures, respectively. The printed ion-selective working electrode has been miniaturized to a size of 22,400 µm2 equivalent to a square shape of ∼150 × 150 µm2 comparable to the size of a human cell. By adding graphene to the ion selective PVC film, more than 90 % charge transfer resistance reduction can be achieved and the shunt capacitance is increased by 3.4-fold in shunt capacitance compared to the film without graphene, thereby more than 33 % reduction of the response time required to reach equilibrium. Meanwhile, these miniaturized potassium sensors using the working electrodes with/without adding graphene have been integrated with in-lab signal-processing and wireless-transmission module to yield similar results to the one measured by commercial electrochemical workstation showing a great potential for real-time monitoring in portable clinical trials. Specifically, the proposed sensor utilizing graphene-enhanced electrodes demonstrates a linearity uncertainty of 2.9 mV, which is approximately half of the uncertainty observed in the sensors lacking graphene integration.

Inkjet-printed flexible non-enzymatic lactate sensor with high sensitivity and low interference using a stacked NiOx/NiOx-Nafion nanocomposite electrode with clinical blood test verification.

In this paper, we present a flexible, inkjet-printed, non-enzymatic lactate sensor with high sensitivity and specificity, using a stacked nickel oxide-Nafion nanocomposite/nickel oxide working electrode. Instead of deploying a pure Nafion film on the top of the nickel oxide particles, the nickel oxide-Nafion nanocomposite layer in the new electrode scheme functions not only as an anti-interfering layer but also a reactive layer and the bottom pure nickel oxide layer free from interfering substances mainly participates in the redox reaction to enhance the sensing current. Experimental results show that the sensor with a working electrode printed using a 30 µL NiOx ink and a mixture of 30 µL NiO and 4 µL Nafion ink can exhibit an anti-interference ability of >95%, a sensitivity of 20.56 nA/mM/mm2, and limit of detection (LoD) of 0.27 mM satisfying the criteria for human lactate detection. In clinical trial, blood plasma test results show that lactate levels detected using this sensor have a strong linear correlation coefficient square of 0.959 with those measured using the colorimetry method used in hospitals, indicating its potential for application in the management of patients with abnormal lactate values requiring intensive care.