Oligo(serine ester) Charge-Altering Releasable Transporters: Organocatalytic Ring-Opening Polymerization and their Use for in Vitro and in Vivo mRNA Delivery.

RNA technology is transforming life science research and medicine, but many applications are limited by the accessibility, cost, efficacy, and tolerability of delivery systems. Here we report the first members of a new class of dynamic RNA delivery vectors, oligo(serine ester)-based charge-altering releasable transporters (Ser-CARTs). Composed of lipid-containing oligocarbonates and cationic oligo(serine esters), Ser-CARTs are readily prepared (one flask) by a mild ring-opening polymerization using thiourea anions and, upon simple mixing with mRNA, readily form complexes that degrade to neutral serine-based products, efficiently releasing their mRNA cargo. mRNA/Ser-CART transfection efficiencies of >95% are achieved in vitro. Intramuscular or intravenous (iv) injections of mRNA/Ser-CARTs into living mice result in in vivo expression of a luciferase reporter protein, with spleen localization observed after iv injection.

Oxygen atom transfer to a half-sandwich iridium complex: clean oxidation yielding a molecular product.

The oxidation of [Ir(Cp*)(phpy)(NCAr(F))][B(Ar(F))4] (1; Cp* = η(5)-pentamethylcyclopentadienyl, phpy = 2-phenylene-κC(1')-pyridine-κN, NCAr(F) = 3,5-bis(trifluoromethyl)benzonitrile, B(Ar(F))4 = tetrakis[3,5-bis(trifluoromethyl)phenyl]borate) with the oxygen atom transfer (OAT) reagent 2-tert-butylsulfonyliodosobenzene (sPhIO) yielded a single, molecular product at -40 °C. New Ir(Cp*) complexes with bidentate ligands derived by oxidation of phpy were synthesized to model possible products resulting from oxygen atom insertion into the iridium-carbon and/or iridium-nitrogen bonds of phpy. These new ligands were either cleaved from iridium by water or formed unreactive, phenoxide-bridged iridium dimers. The reactivity of these molecules suggested possible decomposition pathways of Ir(Cp*)-based water oxidation catalysts with bidentate ligands that are susceptible to oxidation. Monitoring the [Ir(Cp*)(phpy)(NCAr(F))](+) oxidation reaction by low-temperature NMR techniques revealed that the reaction involved two separate OAT events. An intermediate was detected, synthesized independently with trapping ligands, and characterized. The first oxidation step involves direct attack of the sPhIO oxidant on the carbon of the coordinated nitrile ligand. Oxygen atom transfer to carbon, followed by insertion into the iridium-carbon bond of phpy, formed a coordinated organic amide. A second oxygen atom transfer generated an unidentified iridium species (the "oxidized complex"). In the presence of triphenylphosphine, the "oxidized complex" proved capable of transferring one oxygen atom to phosphine, generating phosphine oxide and forming an Ir-PPh3 adduct in 92% yield. The final Ir-PPh3 product was fully characterized.

Probing the oxidation chemistry of half-sandwich iridium complexes with oxygen atom transfer reagents.

The new complexes [Ir(Cp*)(phpy)3,5-bis(trifluoromethyl)benzonitrile](+) (1-NCAr(+)) and [Ir(Cp*)(phpy)(styrene)](+) (1-Sty(+), Cp* = η(5)-pentamethylcyclopentadienyl, phpy = 2-phenylene-κC(1')-pyridine-κN) were prepared as analogues of reported iridium water oxidation catalysts, to study their reactions with oxygen atom transfer (OAT) reagents at low temperatures. In no case was the desired product, an Ir(V)oxo complex, observed by spectroscopy. Instead, ligand oxidation was implicated. Oxidation of 1-NCAr(+) with the OAT reagent dimethyldioxirane (DMDO) yielded dioxygen when analyzed by GC, but formation of a heterogeneous or paramagnetic species was simultaneously observed. This amplifies uncertainty over the actual identity of iridium catalysts in the harsh oxidizing conditions required for water oxidation. Catalyst stability was then assessed for a reported styrene epoxidation mediated by [Ir(Cp*)(phpy)(OH2)](+) (1-OH2(+)). It was found that the OAT reagent iodosobenzene (PhIO) extensively oxidized the organic ligands of 1-OH2(+). Acetic acid was detected as a decomposition product. In addition, both the molecular structure and the aqueous electrochemistry of 1-OH2(+) are described for the first time. Oxidative scans revealed rapid decomposition of the complex. All of the above experiments indicate that degradation of the organic ligands in catalysts built with the Ir(Cp*)(phpy) framework are facile under oxidizing conditions. In separate experiments designed to promote ligand substitution, an unexpected silver-bridged, dinuclear Ir(III) species with terminal hydrides, [{Ir(Cp*)(phpy)H}2Ag](+) (2), was discovered. The source of Ag(+) for complex 2 was identified as AgCl.

A Biodegradable, Polymer-Supported Oxygen Atom Transfer Reagent.

Biodegradable polymers are desirable to mitigate the environmental impact of plastic waste in the environment. Over the past several decades, the development of organocatalytic ring-opening polymerization (OROP) has made the synthesis of many new types of biodegradable polymers possible. In this research article, the first example of an oxygen atom transfer reagent pendant on a biodegradable polymer backbone is reported. The monomers for the polycarbonate backbone are sourced from the biodegradable 2,2-bis(hydroxymethyl) propionic acid molecule, and an iodoaryl group is installed pendant to the cyclic monomer for post-polymerization modification into an iodosylaryl oxygen atom transfer reagent. The key I-O bond is characterized by XPS spectroscopy, and a test reaction to triphenylphosphine demonstrates the ability of the polymer to engage in an oxygen atom transfer reaction with a substrate.

Synthesis of cis and trans bis-alkynyl complexes of Cr(III) and Rh(III) supported by a tetradentate macrocyclic amine: a spectroscopic investigation of the M(III)-alkynyl interaction.

Alkynyl complexes of the type [M(cyclam)(CCR)(2)]OTf (where cyclam = 1,4,8,11-tetraazacyclotetradecane; M = Rh(III) or Cr(III); and R = phenyl, 4-methylphenyl, 4-trifluoromethylphenyl, 4-fluorophenyl, 1-naphthalenyl, 9-phenanthrenyl, and cyclohexyl) were prepared in 49% to 93% yield using a one-pot synthesis involving the addition of 2 equiv of RCCH and 4 equiv of BuLi to the appropriate [M(cyclam)(OTf)(2)]OTf complex in THF. The cis and trans isomers of the alkynyl complexes were separated using solubility differences, and the stereochemistry was characterized using infrared spectroscopy of the CH(2) rocking and NH bending region. All of the trans-[M(cyclam)(CCR)(2)]OTf complexes exhibit strong Raman bands between 2071 and 2109 cm(-1), ascribed to ν(s)(C≡C). The stretching frequencies for the Cr(III) complexes are 21-28 cm(-1) lower than for the analogous Rh(III) complexes, a result that can be interpreted in terms of the alkynyl ligands acting as π-donors. UV-vis spectra of the Cr(III) and Rh(III) complexes are dominated by strong charge transfer (CT) transitions. In the case of the Rh(III) complexes, these CT transitions obscure the metal centered (MC) transitions, but in the case of the Cr(III) complexes the MC transitions are unobscured and appear between 320 and 500 nm, with extinction coefficients (170-700 L mol(-1) cm(-1)) indicative of intensity stealing from the proximal CT bands. The Cr(III) complexes show long-lived (240-327 µs), structureless, MC emission centered between 731 and 748 nm in degassed room temperature aqueous solution. Emission characteristics are also consistent with the arylalkynyl ligands acting as π-donors. The Rh(III) complexes also display long-lived (4-21 µs), structureless, metal centered emission centered between 524 and 548 nm in degassed room temperature solution (CH(3)CN).

Synthesis and mechanistic investigations of pH-responsive cationic poly(aminoester)s.

The synthesis and degradation mechanisms of a class of pH-sensitive, rapidly degrading cationic poly(α-aminoester)s are described. These reactive, cationic polymers are stable at low pH in water, but undergo a fast and selective degradation at higher pH to liberate neutral diketopiperazines. Related materials incorporating oligo(α-amino ester)s have been shown to be effective gene delivery agents, as the charge-altering degradative behavior facilitates the delivery and release of mRNA and other nucleic acids in vitro and in vivo. Herein, we report detailed studies of the structural and environmental factors that lead to these rapid and selective degradation processes in aqueous buffers. At neutral pH, poly(α-aminoester)s derived from N-hydroxyethylglycine degrade selectively by a mechanism involving sequential 1,5- and 1,6-O→N acyl shifts to generate bis(N-hydroxyethyl) diketopiperazine. A family of structurally related cationic poly(aminoester)s was generated to study the structural influences on the degradation mechanism, product distribution, and pH dependence of the rate of degradation. The kinetics and mechanism of the pH-induced degradations were investigated by 1H NMR, model reactions, and kinetic simulations. These results indicate that polyesters bearing α-ammonium groups and appropriately positioned N-hydroxyethyl substituents are readily cleaved (by intramolecular attack) or hydrolyzed, representing dynamic "dual function" materials that are initially polycationic and transform with changing environment to neutral products.

Nitrile Oxidation at a Ruthenium Complex leading to Intermolecular Imido Group Transfer.

The oxidation of an acetonitrile ligand coordinated to ruthenium is explored in deuterated dimethylsulfoxide by 1H NMR spectroscopy. When oxidized with an iodosoarene oxygen atom transfer (OAT) reagent, kinetic studies demonstrate that the nitrile ligand does not dissociate before reacting. Instead, OAT to the central nitrile carbon is implicated (nitrile oxidation), and is further supported by the product of the reaction, N-acyl-dimethylsulfoximine. The N-acyl-dimethylsulfoximine likely formed by an imido group transfer reaction from ruthenium to the NMR solvent, and the product was synthesized independently to verify its identity in the reaction. This reaction represents the first time that a nitrile oxidation reaction has resulted in intermolecular imido group transfer to a substrate, presumably through a reactive ruthenium(IV)imido intermediate. This suggests that nitrile oxidation is a plausible route into reactive metal-imido intermediates for amination and aziridination reactions.

Emissive chromium(III) complexes with substituted arylethynyl ligands.

Arylethynylchromium(III) complexes of the form trans-[Cr(cyclam)(CCC(6)H(4)R)(2)]OTf (where cyclam = 1,4,8,11-tetraazacyclotetradecane, R = H, CH(3), or CF(3) in the para position, and OTf = trifluoromethanesulfonate) have been prepared and characterized by IR spectroscopy and X-ray diffraction. The complexes are emissive with excited-state lifetimes in a deoxygenated fluid solution between 200 and 300 micros.