3-D joint space mapping at the ankle from weight-bearing CT: reproducibility, repeatability, and challenges for standardisation.

OBJECTIVES: We present a 3-D approach to joint space width (JSW) measurement across the ankle from weight-bearing CT (WBCT) to demonstrate inter-operator reproducibility, test-retest repeatability, and how differences in angulation affect ankle JSW distribution. METHODS: One side from repeat WBCT imaging of both feet and ankles was analysed from 23 individuals as part of their routine clinical care pathway. Joint space mapping was performed at four facets across the talus: talonavicular, talar dome and medial gutter (dome-medial), lateral gutter, and posterior subtalar. Inter-operator reproducibility was calculated for two users, while test-retest repeatability was calculated by comparing the two visits, both presented as Bland-Altman statistics. Statistical parametric mapping determined any significant relationships between talocrural joint space angulation and 3-D JSW distribution. RESULTS: The average ± standard deviation interval between imaging was 74.0 ± 29.6 days. Surface averaged bias ± limits of agreement were similar for reproducibility and repeatability, the latter being: talonavicular 0.01 ± 0.26 mm, dome-medial 0.00 ± 0.28 mm, lateral gutter - 0.02 ± 0.40 mm, and posterior subtalar 0.02 ± 0.34 mm. Results are presented as 3-D distribution maps, with optimum test-retest repeatability reaching a smallest detectable difference of ± 0.15 mm. CONCLUSIONS: Joint space mapping is a robust approach to 3-D quantification of JSW measurement, inter-operator reproducibility, and test-retest repeatability at the ankle, with sensitivity reaching a best value of ± 0.15 mm. Standardised imaging protocols and optimised metal artefact reduction will be needed to further understand the clinical value of these 3-D measures derived from WBCT. CLINICAL RELEVANCE STATEMENT: Weight-bearing computed tomography is an increasingly important tool in the clinical assessment of orthopaedic ankle disorders. This paper establishes the performance of measuring 3-D joint space width using this technology, which is an important surrogate marker for severity of osteoarthritis. KEY POINTS: • Joint space width values and error metrics from across the ankle measured from weight-bearing CT can be presented as 3-D maps that show topographic variation. • The best sensitivity for detecting meaningful change in 3-D joint space width at the ankle was ± 0.15 mm, a value less than the isotropic imaging voxel dimensions. • Standardised imaging protocols and optimised metal artefact reduction will be needed to understand the clinical value of 3-D measures from weight-bearing CT.

Knee joint distraction results in MRI cartilage thickness increase up to 10 years after treatment.

OBJECTIVES: Knee joint distraction (KJD) has been shown to result in long-term clinical improvement and short-term cartilage restoration in young OA patients. The objective of the current study was to evaluate MRI cartilage thickness up to 10 years after KJD treatment, using a 3D surface-based approach. METHODS: Twenty end-stage knee OA patients were treated with KJD. MRI scans (1.5 T) were performed before and at 1, 2, 5, 7, and 10 years after treatment. Tibia and femur cartilage segmentation and registration to a canonical surface were performed semi-automatically. Statistical parametric mapping with linear mixed models was used to analyse whole-joint changes. The influence of baseline patient characteristics was analysed with statistical parametric mapping using linear regression. Relevant weight-bearing parts of the femur were selected to obtain the average cartilage thickness in the femur and tibia of the most- (MAC) and least-affected compartment. These compartmental changes over time were analysed using repeated measures ANOVA; missing data was imputed. In all cases, P <0.05 was considered statistically significant. RESULTS: One and 2 years post-treatment, cartilage in the MAC weight-bearing region was significantly thicker than pre-treatment, gradually thinning after 5 years, but still increased at 10 years post-treatment. Long-term results showed that areas in the least-affected compartment were significantly thicker than pre-treatment. Male sex and more severe OA at baseline somewhat predicted shorter-term benefit (P >0.05). Compartmental analyses showed significant short- and long-term thickness increase in the tibia and femur MAC (all P <0.05). CONCLUSION: KJD results in significant short- and long-term cartilage regeneration, up to 10 years post-treatment. TRIAL REGISTRATION: Netherlands Trial Register, https://www.trialregister.nl, NL419.

Quantitative Three-dimensional Assessment of Knee Joint Space Width from Weight-bearing CT.

Background Imaging of structural disease in osteoarthritis has traditionally relied on MRI and radiography. Joint space mapping (JSM) can be used to quantitatively map joint space width (JSW) in three dimensions from CT images. Purpose To demonstrate the reproducibility, repeatability, and feasibility of JSM of the knee using weight-bearing CT images. Materials and Methods Two convenience samples of weight-bearing CT images of left and right knees with radiographic Kellgren-Lawrence grades (KLGs) less than or equal to 2 were acquired from 2014 to 2018 and were analyzed retrospectively with JSM to deliver three-dimensional JSW maps. For reproducibility, images of three sets of knees were used for novice training, and then the JSM output was compared against an expert's assessment. JSM was also performed on 2-week follow-up images in the second cohort, yielding three-dimensional JSW difference maps for repeatability. Statistical parametric mapping was performed on all knee imaging data (KLG, 0-4) to show the feasibility of a surface-based analysis in three dimensions. Results Reproducibility (in 20 individuals; mean age, 58 years ± 7 [standard deviation]; mean body mass index, 28 kg/m2 ± 6; 14 women) and repeatability (in nine individuals; mean age, 53 years ± 6; mean body mass index, 26 kg/m2 ± 4; seven women) reached their lowest performance at a smallest detectable difference less than ±0.1 mm in the central medial tibiofemoral joint space for individuals without radiographically demonstrated disease. The average root mean square coefficient of variation was less than 5% across all groups. Statistical parametric mapping (33 individuals; mean age, 57 years ± 7; mean body mass index, 27 kg/m2 ± 6; 23 women) showed that the central-to-posterior medial joint space was significantly narrower by 0.5 mm for each incremental increase in the KLG (threshold P < .05). One knee (KLG, 2) demonstrated a baseline versus 24-month change in its three-dimensional JSW distribution that was beyond the smallest detectable difference across the lateral joint space. Conclusion Joint space mapping of the knee using weight-bearing CT images is feasible, demonstrating a relationship between the three-dimensional joint space width distribution and structural joint disease. It is reliably learned by novice users, can be personalized for disease phenotypes, and can be used to achieve a smallest detectable difference that is at least 50% smaller than that reported to be achieved at the highest performance level in radiography. © RSNA, 2021 Online supplemental material is available for this article. See also the editorial by Roemer in this issue.

Non-contrast MRI of synovitis in the knee using quantitative DESS.

OBJECTIVES: To determine whether synovitis graded by radiologists using hybrid quantitative double-echo in steady-state (qDESS) images can be utilized as a non-contrast approach to assess synovitis in the knee, compared against the reference standard of contrast-enhanced MRI (CE-MRI). METHODS: Twenty-two knees (11 subjects) with moderate to severe osteoarthritis (OA) were scanned using CE-MRI, qDESS with a high diffusion weighting (qDESSHigh), and qDESS with a low diffusion weighting (qDESSLow). Four radiologists graded the overall impression of synovitis, their diagnostic confidence, and regional grading of synovitis severity at four sites (suprapatellar pouch, intercondylar notch, and medial and lateral peripatellar recesses) in the knee using a 4-point scale. Agreement between CE-MRI and qDESS, inter-rater agreement, and intra-rater agreement were assessed using a linearly weighted Gwet's AC2. RESULTS: Good agreement was seen between CE-MRI and both qDESSLow (AC2 = 0.74) and qDESSHigh (AC2 = 0.66) for the overall impression of synovitis, but both qDESS sequences tended to underestimate the severity of synovitis compared to CE-MRI. Good inter-rater agreement was seen for both qDESS sequences (AC2 = 0.74 for qDESSLow, AC2 = 0.64 for qDESSHigh), and good intra-rater agreement was seen for both sequences as well (qDESSLow AC2 = 0.78, qDESSHigh AC2 = 0.80). Diagnostic confidence was moderate to high for qDESSLow (mean = 2.36) and slightly less than moderate for qDESSHigh (mean = 1.86), compared to mostly high confidence for CE-MRI (mean = 2.73). CONCLUSIONS: qDESS shows potential as an alternative MRI technique for assessing the severity of synovitis without the use of a gadolinium-based contrast agent. KEY POINTS: The use of the quantitative double-echo in steady-state (qDESS) sequence for synovitis assessment does not require the use of a gadolinium-based contrast agent. Preliminary results found that low diffusion-weighted qDESS (qDESSLow) shows good agreement to contrast-enhanced MRI for characterization of the severity of synovitis, with a relative bias towards underestimation of severity. Preliminary results also found that qDESSLow shows good inter- and intra-rater agreement for the depiction of synovitis, particularly for readers experienced with the sequence.

Three-Dimensional Surface-Based Analysis of Cartilage MRI Data in Knee Osteoarthritis: Validation and Initial Clinical Application.

BACKGROUND: Traditional quantitative analysis of cartilage with MRI averages measurements (eg, thickness) across regions-of-interest (ROIs) which may reduce responsiveness. PURPOSE: To validate and describe clinical application of a semiautomated surface-based method for analyzing cartilage relaxation times ("composition") and morphology on MRI, 3D cartilage surface mapping (3D-CaSM). STUDY TYPE: Validation study in cadaveric knees and prospective observational (cohort) study in human participants. POPULATION: Four cadaveric knees and 14 participants aged 40-60 with mild-moderate knee osteoarthritis (OA) and 6 age-matched healthy volunteers, imaged at baseline, 1, and 6 months. FIELD STRENGTH/SEQUENCE: 3D spoiled gradient echo, T1 rho/T2 magnetization-prepared 3D fast spin echo for mapping of T1 rho/T2 relaxation times and delayed gadolinium enhanced MRI of cartilage (dGEMRIC) using variable flip angle T1 relaxation time mapping at 3T. ASSESSMENT: 3D-CaSM was validated against high-resolution peripheral quantitative computed tomography (HRpQCT) in cadaveric knees, with comparison to expert manual segmentation. The clinical study assessed test-retest repeatability and sensitivity to change over 6 months for cartilage thickness and relaxation times. STATISTICAL TESTS: Bland-Altman analysis was performed for the validation study and evaluation of test-retest repeatability. Six-month changes were assessed via calculation of the percentage of each cartilage surface affected by areas of significant change (%SC), defined using thresholds based on area and smallest detectable difference (SDD). RESULTS: Bias and precision (0.06 ± 0.25 mm) of 3D-CaSM against reference HRpQCT data were comparable to expert manual segmentation (-0.13 ± 0.26 mm). 3D-CaSM demonstrated significant (>SDD) 6-month changes in cartilage thickness and relaxation times in both OA participants and healthy controls. The parameter demonstrating the greatest 6-month change was T2 relaxation time (OA median %SC [IQR] = 8.8% [5.5 to 12.6]). DATA CONCLUSION: This study demonstrates the construct validity and potential clinical utility of 3D-CaSM, which may offer advantages to conventional ROI-based methods. LEVEL OF EVIDENCE: 2. TECHNICAL EFFICACY STAGE: 2. J. Magn. Reson. Imaging 2020;52:1139-1151.

Quantitative 3D analysis of bone in hip osteoarthritis using clinical computed tomography.

OBJECTIVE: To assess the relationship between proximal femoral cortical bone thickness and radiological hip osteoarthritis using quantitative 3D analysis of clinical computed tomography (CT) data. METHODS: Image analysis was performed on clinical CT imaging data from 203 female volunteers with a technique called cortical bone mapping (CBM). Colour thickness maps were created for each proximal femur. Statistical parametric mapping was performed to identify statistically significant differences in cortical bone thickness that corresponded with the severity of radiological hip osteoarthritis. Kellgren and Lawrence (K&L) grade, minimum joint space width (JSW) and a novel CT-based osteophyte score were also blindly assessed from the CT data. RESULTS: For each increase in K&L grade, cortical thickness increased by up to 25 % in distinct areas of the superolateral femoral head-neck junction and superior subchondral bone plate. For increasing severity of CT osteophytes, the increase in cortical thickness was more circumferential, involving a wider portion of the head-neck junction, with up to a 7 % increase in cortical thickness per increment in score. Results were not significant for minimum JSW. CONCLUSIONS: These findings indicate that quantitative 3D analysis of the proximal femur can identify changes in cortical bone thickness relevant to structural hip osteoarthritis. KEY POINTS: • CT is being increasingly used to assess bony involvement in osteoarthritis • CBM provides accurate and reliable quantitative analysis of cortical bone thickness • Cortical bone is thicker at the superior femoral head-neck with worse osteoarthritis • Regions of increased thickness co-locate with impingement and osteophyte formation • Quantitative 3D bone analysis could enable clinical disease prediction and therapy development.

The linguistic roots of Modern English anatomical terminology.

Previous research focusing on Classical Latin and Greek roots has shown that understanding the etymology of English anatomical terms may be beneficial for students of human anatomy. However, not all anatomical terms are derived from Classical origins. This study aims to explore the linguistic roots of the Modern English terminology used in human gross anatomy. By reference to the Oxford English Dictionary, etymologies were determined for a lexicon of 798 Modern English gross anatomical terms from the 40(th) edition of Gray's Anatomy. Earliest traceable language of origin was determined for all 798 terms; language of acquisition was determined for 747 terms. Earliest traceable languages of origin were: Classical Latin (62%), Classical Greek (24%), Old English (7%), Post-Classical Latin (3%), and other (4%). Languages of acquisition were: Classical Latin (42%), Post-Classical Latin (29%), Old English (8%), Modern French (6%), Classical Greek (5%), Middle English (3%), and other (7%). While the roots of Modern English anatomical terminology mostly lie in Classical languages (accounting for the origin of 86% of terms), the anatomical lexicon of Modern English is actually much more diverse. Interesting and perhaps less familiar examples from these languages and the methods by which such terms have been created and absorbed are discussed. The author suggests that awareness of anatomical etymologies may enhance the enjoyment and understanding of human anatomy for students and teachers alike.

Multiparametric 3-D analysis of bone and joint space width at the knee from weight bearing computed tomography.

Objective: Computed tomography (CT) can deliver multiple parameters relevant to osteoarthritis. In this study we demonstrate that a 3-D multiparametric approach at the weight bearing knee with cone beam CT is feasible, can include multiple parameters from across the joint space, and can reveal stronger relationships with disease status in combination. Design: 33 participants with knee weight bearing CT (WBCT) were analysed with joint space mapping and cortical bone mapping to deliver joint space width (JSW), subchondral bone plate thickness, endocortical thickness, and trabecular attenuation at both sides of the joint. All data were co-localised to the same canonical surface. Statistical parametric mapping (SPM) was applied in uni- and multivariate models to demonstrate significant dependence of parameters on Kellgren & Lawrence grade (KLG). Correlation between JSW and bony parameters and 2-week test-retest repeatability were also calculated. Results: SPM revealed that the central-to-posterior medial tibiofemoral joint space was significantly narrowed by up to 0.5 mm with significantly higher tibial trabecular attenuation up to 50 units for each increment in KLG as single features, and in a wider distribution when combined (p<0.05). These were also more strongly correlated with worsening KLG grade category. Test-retest repeatability was subvoxel (0.37 mm) for nearly all thickness parameters. Conclusions: 3-D JSW and tibial trabecular attenuation are repeatable and significantly dependent on radiographic disease severity at the weight bearing knee joint not just alone, but more strongly in combination. A quantitative multiparametric approach with WBCT may have potential for more sensitive investigation of disease progression in osteoarthritis.

Computed tomography of subchondral bone and osteophytes in hip osteoarthritis: the shape of things to come?

Bone is a fundamental component of the disordered joint homeostasis seen in osteoarthritis, a disease that has been primarily characterized by the breakdown of articular cartilage accompanied by local bone changes and a limited degree of joint inflammation. In this review we consider the role of computed tomography imaging and computational analysis in osteoarthritis research, focusing on subchondral bone and osteophytes in the hip. We relate what is already known in this area to what could be explored through this approach in the future in relation to both clinical research trials and the underlying cellular and molecular science of osteoarthritis. We also consider how this area of research could impact on our understanding of the genetics of osteoarthritis.

Salmonella pyomyositis complicating sickle cell anemia: a case report.

INTRODUCTION: Pyomyositis is a bacterial infection of skeletal muscle and a rare complication of sickle cell anemia. It may present a difficult problem in diagnosis, leading to delay in appropriate treatment and development of complications including abscess formation and osteomyelitis. CASE PRESENTATION: We report the case of a 44-year-old Afro-Caribbean woman with homozygous sickle cell disease who presented with chest crisis and later developed pyomyositis of her hip and pelvic muscles. Salmonella agbeni was isolated from blood cultures and magnetic resonance imaging confirmed the diagnosis in this case. It is noteworthy of this case that there were no antecedent signs of gastroenteritis. Drainage was not appropriate and she was treated with intravenous antibiotics for six weeks. CONCLUSIONS: Focal Salmonella infections are uncommon in soft tissue. Pyomyositis should be considered in patients with sickle cell anemia that continue to have muscle pain and high fevers, despite initial management of their sickle cell crisis. Radiological imaging, particularly magnetic resonance imaging, is a crucial tool in establishing the diagnosis.