Polarization-dependent SERS effects of laser-generated sub-100 nm antenna structures.

Sub-100 nm antenna arrays consisting of a star-like ridge or dome-like structures with needles in their centers are prepared in thin gold films on glass substrates using femtosecond laser pulses. The needles can be bent mechanically to be horizontally aligned to the substrate surface. Controlled variation of the pulse energy allows one to obtain nanostructures of different defined morphologies. These arrays of nanostructures are covered with a thin homogeneous layer of rhodamine molecules. Raman spectra using linearly polarized laser light of 632.8 nm are taken with the laser spot centered on individual nanostructures and at positions on the unstructured film. The average Raman enhancement within the laser spot focused onto a nanostructure is two orders of magnitude higher than on the unstructured film. The nanostructures with bent needles exhibit a polarization dependence of the SERS effect, i.e., typically the enhancement is larger by about a factor of two for excitation light polarized parallel to the needle direction than for the perpendicular case. The enhancement factor of the star-like ridge structures with needles is analyzed by the finite-element method, which agrees with the experiment. We show that the variation of the SERS activity of almost similar structures arises from the inherent randomness of the hot spots created in the fabrication process. Nevertheless, these antenna structures may be useful as elements in novel SERS devices as they can be accurately positioned on a device using a cheap fabrication process compatible with microfabrication technology.

Assessment of Visual Quality Improvement as a Result of Spectacle Personalization.

Personalized spectacles customized according to an individual's facial anatomy were developed to provide enhanced visual performance and overall comfort when compared to standard spectacles. In this comparative crossover trial, each subject was randomly assigned to wear either personalized spectacles or standard spectacles for two weeks and then tried the second pair for another two weeks. Visual acuity and reading speed were measured, and visual quality and comfort were assessed using specific questionnaires. The correlation of the wearing parameters with the subjects' satisfaction was calculated. According to our results, the subjects wearing personalized glasses reported significantly less experience of swaying and significantly higher overall satisfaction compared to those wearing the control spectacles. At the end of the study, 62% of subjects preferred the personalized spectacles, and visual quality was the primary reason for their spectacle preference followed by wearing comfort. The difference from the ideal cornea-vertex distance was significantly lower when wearing the personalized spectacles compared to the control frames. In addition, the absolute value of the difference from the ideal cornea-vertex distance was significantly correlated with patient satisfaction. These results suggest that personalized spectacles, customized according to an individual's facial anatomy for the ideal wearing parameters, result in both visual and comfort advantages for wearers.

Time-resolved studies of femtosecond-laser induced melt dynamics.

This work presents time-resolved images of femtosecond-laser-induced melt dynamics in 60 nm gold films on glass substrates. Melt dynamics induced by laser radiation with focus diameters of 6 µm and 8 µm (FWHM) at constant laser fluence is investigated with a temporal resolution of 10 ns. In both cases, the formation of the microbumps and gold jets takes at least 250 ns. It is shown that the formation process can be compared to jetting behavior induced by cavitation bubbles near a free liquid surface. This is confirmed by SEM illustrating a re-entrant spike through a hole in the microbump.

Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting.

BACKGROUND: Laser-assisted bioprinting of multi-cellular replicates in accordance with CAD blueprint may substantially improve our understandings of fundamental aspects of 3 D cell-cell and cell-matrix interactions in vitro. For predictable printing results, a profound knowledge about effects of different processing parameters is essential for realisation of 3 D cell models with well-defined cell densities. METHODS: Time-resolved imaging of the hydrogel jet dynamics and quantitative assessment of the dependence of printed droplet diameter on the process characteristics were conducted. RESULTS: The existence of a counterjet was visualised, proving the bubble collapsing theory for the jet formation. Furthermore, by adjusting the viscosity and height of the applied hydrogel layer in combination with different laser pulse energies, the printing of volumes in the range of 10 to 7000 picolitres was demonstrated. Additionally, the relationship between the viscosity and the layer thickness at different laser pulse energies on the printed droplet volume was identified. CONCLUSIONS: These findings are essential for the advancement of laser-assisted bioprinting by enabling predictable printing results and the integration of computational methods in the generation of 3 D multi-cellular constructs.

Laser printing of stem cells for biofabrication of scaffold-free autologous grafts.

Stem cells are of widespread interest in regenerative medicine due to their capability of self-renewal and differentiation, which is regulated by their three-dimensional microenvironment. In this study, a computer-aided biofabrication technique based on laser-induced forward transfer (LIFT) is used to generate grafts consisting of mesenchymal stem cells (MSCs). We demonstrate that (i) laser printing does not cause any cell damage; (ii) laser-printed MSC grafts can be differentiated toward bone and cartilage; (iii) LIFT allows printing of cell densities high enough for the promotion of chondrogenesis; (iv) with LIFT three-dimensional scaffold-free autologous tissue grafts can be fabricated keeping their predefined structure, and (v) predifferentiated MSCs survived the complete printing procedure and kept their functionality. We believe that our results will find important applications in stem cell biology and tissue engineering.

Intact emotion-induced recognition bias in neuropsychological patients with executive control deficits.

In recognition memory tasks, emotionally negative words are judged more often as "old" relative to emotionally neutral words, suggesting a shift in response bias. We wondered whether this bias shift was due to the flexible regulation of executive control during memory retrieval. To address this question, we investigated individuals with high variability in executive control functions. As expected, we observed that emotional word meaning did indeed have a strong influence on the bias toward responding "old," independent of recognition accuracy and overall response bias. However, these effects were uncorrelated with executive control, as measured by the Trail Making Test, and were fully intact, even in a sample of hospitalized neurological patients with severe executive dysfunctions, some of whom had marked damage in fronto-thalamo-striatal networks. Having concluded that the emotion-induced bias must develop on different grounds, we went on to discuss alternative explanations.