A New Class of Task-Specific Imidazolium Salts and Ionic Liquids and Their Corresponding Transition-Metal Complexes for Immobilization on Electrochemically Active Surfaces.

Adding to the versatile class of ionic liquids, we report the detailed structure and property analysis of a new class of asymmetrically substituted imidazolium salts, offering interesting thermal characteristics, such as liquid crystalline behavior, polymorphism or glass transitions. A scalable general synthetic procedure for N-polyaryl-N'-alkyl-functionalized imidazolium salts with para-substituted linker (L) moieties at the aryl chain, namely [LPhm ImH R]+ (L=Br, CN, SMe, CO2 Et, OH; m=2, 3; R=C12 , PEGn ; n=2, 3, 4), was developed. These imidazolium salts were studied by single-crystal X-ray diffraction (SC-XRD), NMR spectroscopy and thermochemical methods (DSC, TGA). Furthermore, these imidazolium salts were used as N-heterocyclic carbene (NHC) ligand precursors for mononuclear, first-row transition metal complexes (MnII , FeII , CoII , NiII , ZnII , CuI , AgI , AuI ) and for the dinuclear Ti-supported Fe-NHC complex [(OPy)2 Ti(OPh2 ImC12 )2 (FeI2 )] (OPy=pyridin-2-ylmethanolate). The complexes were studied concerning their structural and magnetic behavior via multi-nuclear NMR spectroscopy, SC-XRD analyses, variable temperature and field-dependent (VT-VF) SQUID magnetization methods, X-band EPR spectroscopy and, where appropriate, zero-field 57 Fe Mössbauer spectroscopy.

Effect of Bromide on the Surfactant Stabilization Layer Density of Gold Nanorods.

Some studies have speculated that the concentration of bromide ions plays a crucial role in the surfactant density surrounding gold nanorods (AuNR). Small-angle X-ray and neutron scattering (SAXS and SANS) experiments were conducted to analyze any influence the bromide ions might have on the stabilization layer and the aggregation behavior of the ligand CTAB molecules in general. The AuNR were immersed in solutions containing a fixed CTA+ concentration of 2 mM and varying bromide ion concentrations from 0 to 22 mM. A patchy AuNR stabilization shell at low bromide ion concentrations was found, contrary to previously published SANS studies on the AuNR stabilization shell. However, with increasing bromide ion concentration, the density of the stabilization shell increases asymptotically toward a closed/collapsed bilayer configuration. AuNR grown under similar conditions show higher anisotropy with larger bromide ion concentrations. Both results indicate that anisotropic growth strongly depends on a sufficiently dense stabilization layer established by high bromide ion concentrations.

A Self-Ordered Nanostructured Transparent Electrode of High Structural Quality and Corresponding Functional Performance.

The preparation of a highly ordered nanostructured transparent electrode based on a combination of nanosphere lithography and anodization is presented. The size of perfectly ordered pore domains is improved by an order of magnitude with respect to the state of the art. The concomitantly reduced density of defect pores increases the fraction of pores that are in good electrical contact with the underlying transparent conductive substrate. This improvement in structural quality translates directly and linearly into an improved performance of energy conversion devices built from such electrodes in a linear manner.

Photo-Initiated Cobalt-Catalyzed Radical Olefin Hydrogenation.

Outer-sphere radical hydrogenation of olefins proceeds via stepwise hydrogen atom transfer (HAT) from transition metal hydride species to the substrate. Typical catalysts exhibit M-H bonds that are either too weak to efficiently activate H2 or too strong to reduce unactivated olefins. This contribution evaluates an alternative approach, that starts from a square-planar cobalt(II) hydride complex. Photoactivation results in Co-H bond homolysis. The three-coordinate cobalt(I) photoproduct binds H2 to give a dihydrogen complex, which is a strong hydrogen atom donor, enabling the stepwise hydrogenation of both styrenes and unactivated aliphatic olefins with H2 via HAT.

Mixed Organic Ligand Shells: Controlling the Nanoparticle Surface Morphology toward Tuning the Optoelectronic Properties.

Precise control over the ratio of perylene bisimide (PBI) monomers and aggregates, immobilized on alumina nanoparticle (NP) surfaces, is demonstrated. Towards this goal, phosphonic acid functionalized PBI derivatives (PA-PBI) are shown to self-assemble into stoichiometrically mixed monolayers featuring aliphatic, glycolic, or fluorinated phosphonic acid ligands, serving as imbedding matrix (PA-M) to afford core-shell NPs. Different but, nevertheless, defined PBI monomer/aggregate composition is achieved by either the variation in the PA-PBI to PA-M ratios, or the utilization of different PA-Ms. Various steady-state as well as time-resolved spectroscopy techniques are applied to probe the core-shell NPs with respect to changes in their optical properties upon variations in the shell composition. To this end, the ratio between monomer and excimer-like emission assists in deriving information on the self-assembled monolayer composition, local ordering, and corresponding aggregate content. With the help of X-ray reflectivity measurements, accompanied by molecular dynamics simulations, the built-up of the particle shells, in general, and the PBI aggregation behavior, in particular, are explored in depth.

Interface between Water-Solvent Mixtures and a Hydrophobic Surface.

The mechanism behind the stability of organic nanoparticles prepared by liquid antisolvent (LAS) precipitation without a specific stabilizing agent is poorly understood. In this work, we propose that the organic solvent used in the LAS process rapidly forms a molecular stabilizing layer at the interface of the nanoparticles with the aqueous dispersion medium. To confirm this hypothesis, n-octadecyltrichlorosilane (OTS)-functionalized silicon wafers in contact with water-solvent mixtures were used as a flat model system mimicking the solid-liquid interface of the organic nanoparticles. We studied the equilibrium structure of the interface by X-ray reflectometry (XRR) for water-solvent mixtures (methanol, ethanol, 1-propanol, 2-propanol, acetone, and tetrahydrofuran). The formation of an organic solvent-rich layer at the solid-liquid interface was observed. The layer thickness increases with the organic solvent concentration and correlates with the polar and hydrogen bond fraction of Hansen solubility parameters. We developed a self-consistent adsorption model via complementing adsorption isotherms obtained from XRR data with molecular dynamics simulations.

Internal Structure of Nanometer-Sized Droplets Prepared by Antisolvent Precipitation.

Antisolvent precipitation (AP) is a low-cost and less-invasive preparation alternative for organic nanoparticles compared to top-down methods such as high-pressure homogenization or milling. Here we report on particularly small organic nanoparticles (NPs) prepared by AP. It has been found for various materials that these NPs in their liquid state exhibit a significant degree of molecular order at their interface toward the dispersion medium including ubiquinones (coenzyme Q10), triglycerides (trimyristin, tripalmitin), and alkanes (tetracosane). This finding is independent of the use of a stabilizer in the formulation. While this is obviously a quite general interfacial structuring effect, the respective structural details of specific NPs systems might differ. Here, a detailed structural characterization of very small liquid coenzyme Q10 (Q10) NPs is presented as a particular example for this phenomenon. The Q10 NPs have been prepared by AP in the presence of two different stabilizers, sodium dodecyl sulfate (SDS) and pentaethylene glycol monododecyl ether (C12E5), respectively, and without any stabilizer. The NPs' size is initially analyzed by photon correlation spectroscopy (PCS). The SDS-stabilized Q10 NPs have been studied further by differential scanning calorimetry (DSC), small-angle X-ray and neutron scattering (SAXS, SANS), wide-angle X-ray scattering (WAXS), and cryogenic transmission electron microscopy (CryoTEM). A simultaneous analysis of SAXS and contrast variation SANS studies revealed the molecular arrangement within the interface between the NPs and the dispersion medium. The Q10 NPs stabilized by SDS and C12E5, respectively, are small (down to 19.9 nm) and stable (for at least 16 months) even when no stabilizer is used. The SDS-stabilized Q10 NPs reported here, are therewith, to the best of our knowledge, the smallest organic NPs which have been reported to be prepared by AP so far. In particular, these NPs exhibit a core-shell structure consisting of an amorphous Q10 core and a surrounding shell, which is mainly composed of oriented Q10 molecules and aligned SDS molecules. This structure suggests a significant amphiphilic behavior and a rather unexpected stabilizing role of Q10 molecules.

Multimodeling Approach to Ferromagnetic Spin-Wave Excitations in the High-Spin Cluster Mn18Sr Observed by Inelastic Neutron Scattering.

The magnetism of the mixed-valence high-spin cluster [Mn18SrO8(N3)7Cl(MedhmpH)12(MeCN)6]Cl2 (1) exhibiting intramolecular ferromagnetic interactions was studied using inelastic neutron scattering (INS), and reliable values for the exchange coupling constants were determined based on the quality of simultaneous fits to the INS and magnetic data. The challenge of the huge size of the Hilbert space (3 375 000) and many exchange coupling constants (7 assuming a C3 symmetry) generally encountered in large spin clusters was resolved as follows: (a) The results of the restricted Hilbert space ferromagnetic cluster spin wave theory were compared to the experimental spectroscopic data. The observed INS transitions were thus assigned to spin wave excitations in a bounded ferromagnetic spin cluster and moreover could be visualized in a straightforward way based on this theory. (b) Simultaneously, Quantum Monte Carlo (QMC) calculations of the temperature-dependent magnetic susceptibility with the same parameter set were compared to the experimental data. Application of state-of-the-art QMC algorithms, as available in the open source ALPS package, in ferromagnetic clusters avoids the full Hamiltonian diagonalization without sacrificing calculation accuracy of the magnetic susceptibility down to the lowest temperatures, which was crucial for the successful analysis. The combined fits revealed two exchange-coupling models with equally good overall agreement to the data. Our preferred model was inspired by magnetostructural correlations and is consistent with them. The model involves three different exchange interactions, one describing the interaction between the core MnIII spins Ja = 14.3(1.0) K and two interactions linking the core and the peripheral MnII spins: Jb = 8.3(4) K and J6 = 3.6(4) K. The use of open-source QMC software and our systematic approach to fitting multiple sets of data obtained by different experimental techniques are described in detail and are generally applicable for understanding large ferromagnetically coupled clusters.

Unravelling the Mechanisms of Gold-Silver Core-Shell Nanostructure Formation by in Situ TEM Using an Advanced Liquid Cell Design.

The growth of silver shells on gold nanorods is investigated by in situ liquid cell transmission electron microscopy using an advanced liquid cell architecture. The design is based on microwells in which the liquid is confined between a thin Si3N4 membrane on one side and a few-layer graphene cap on the other side. A well-defined specimen thickness and an ultraflat cell top allow for the application of high-resolution TEM and the application of analytical TEM techniques on the same sample. The combination of high-resolution data with chemical information is validated by radically new insights into the growth of silver shells on cetrimonium bromide stabilized gold nanorods. It is shown that silver bromide particles already formed in the stock solution play an important role in the exchange of silver ions. The Ag shell growth can be directly correlated with the layer-by-layer dissolution of AgBr nanocrystals, which can be controlled by the electron flux density via distinctly generated chemical species in the solvent. The derived model framework is confirmed by in situ UV-vis absorption spectroscopy evaluating the blue shift in the longitudinal surface plasmon resonance of anisotropic NRs in a complementary batch experiment.

Densification of Silica Spheres: A New Pathway to Nano-Dimensioned Zeolite-Based Catalysts.

Nanosized materials are expected to play a unique role in the development of future catalytic processes. Herein, pre-prepared and geometrically well-defined amorphous silica spheres are densified into silica-rich zeolites with nanosized dimensions. After the densification, the obtained nanosized zeolites exhibit the same spherical morphology like the starting precursor but characterized by a drastically reduced size, higher density, and high crystallinity. The phase transformation into crystalline zeolite material and the densification effect are achieved through a well-controlled steam-assisted treatment of the larger precursor particles so that the transformation process proceeds always towards the center of the spheres, just like a shrinking process. Furthermore, this procedure is applicable also to commercially available silica particles, as well as aluminum-containing systems (precursors) leading to acidic nano-catalysts with improved catalytic performance.

Influence of Tail Groups during Functionalization of ZnO Nanoparticles on Binding Enthalpies and Photoluminescence.

We report on the tailoring of ZnO nanoparticle (NP) surfaces by catechol derivatives (CAT) with different functionalities: tert-butyl group (tertCAT), hydrogen (pyroCAT), aromatic ring (naphCAT), ester group (esterCAT), and nitro group (nitroCAT). The influence of electron-donating/-withdrawing properties on enthalpy of ligand binding (ΔH) was resolved and subsequently linked with optical properties. First, as confirmed by ultraviolet/visible (UV/vis) and Fourier transform infrared (FT-IR) spectroscopy results, all CAT molecules chemisorbed to ZnO NPs, independent of the distinct functionality. Interestingly, the ζ-potentials of ZnO after functionalization shifted to more negative values. Then, isothermal titration calorimetry (ITC) and a mass-based method were applied to resolve the heat release during ligand binding and the adsorption isotherm, respectively. However, both heat- and mass-based approaches alone did not fully resolve the binding enthalpy of each molecule adsorbing to the ZnO surface. This is mainly due to the fact that the Langmuir model oversimplifies the underlying adsorption mechanism, at least for some of the tested CAT molecules. Therefore, a new, fitting-free approach was developed to directly access the adsorption enthalpy per molecule during functionalization by dividing the heat release measured via ITC by the amount of bound molecules determined from the adsorption isotherm. Finally, the efficiency of quenching the visible emission caused by ligand binding was investigated by photoluminescence (PL) spectroscopy, which turned out to follow the same trend as the binding enthalpy. Thus, the functionality of ligand molecules governs the binding enthalpy to the particle surface, which in turn, at least in the current case of ZnO, is an important parameter for the quenching of visible emission. We believe that establishing such correlations is an important step toward a more general way of selecting and designing ligand molecules for surface functionalization. This allows developing strategies for tailored colloidal surfaces beyond empirically driven formulation on a case by case basis.

Magnetic Properties of the Distorted Kagomé Lattice Mn3(1,2,4-(O2C)3C6H3)2.

Kagomé lattice types have been of intense interest as idealized examples of extended frustrated spin systems. Here we demonstrate how the use of neutron diffraction and inelastic neutron scattering coupled with spin wave theory calculations can be used to elucidate the complex magnetic interactions of extended spin networks. We show that the magnetic properties of the coordination polymer Mn3(1,2,4-(O2C)3C6H3)2, a highly distorted kagomé lattice, have been erroneously characterized as a canted antiferromagnet in previous works. Our results demonstrate that, although the magnetic structure is ferrimagnetic, with a net magnetic moment, frustration persists in the system. We conclude by showing that the conventions of the Goodenough-Kanamori rules, which are often applied to similar magnetic exchange interactions, are not relevant in this case.

A robust comparison of dynamical scenarios in a glass-forming liquid.

We use Bayesian inference methods to provide fresh insights into the sub-nanosecond dynamics of glycerol, a prototypical glass-forming liquid. To this end, quasielastic neutron scattering data as a function of temperature have been analyzed using a minimal set of underlying physical assumptions. On the basis of this analysis, we establish the unambiguous presence of three distinct dynamical processes in glycerol, namely, translational diffusion of the molecular centre of mass and two additional localized and temperature-independent modes. The neutron data also provide access to the characteristic length scales associated with these motions in a model-independent manner, from which we conclude that the faster (slower) localized motions probe longer (shorter) length scales. Careful Bayesian analysis of the entire scattering law favors a heterogeneous scenario for the microscopic dynamics of glycerol, where molecules undergo either the faster and longer or the slower and shorter localized motions.

Picosecond dynamics in haemoglobin from different species: a quasielastic neutron scattering study.

BACKGROUND: Dynamics in haemoglobin from platypus (Ornithorhynchus anatinus), chicken (Gallus gallus domesticus) and saltwater crocodile (Crocodylus porosus) were measured to investigate response of conformational motions on the picosecond time scale to naturally occurring variations in the amino acid sequence of structurally identical proteins. METHODS: Protein dynamics was measured using incoherent quasielastic neutron scattering. The quasielastic broadening was interpreted first with a simple single Lorentzian approach and then by using the Kneller-Volino Brownian dynamics model. RESULTS: Mean square displacements of conformational motions, diffusion coefficients of internal dynamics and residence times for jump-diffusion between sites and corresponding effective force constants (resilience) and activation energies were determined from the data. CONCLUSIONS: Modifications of the physicochemical properties caused by mutations of the amino acids were found to have a significant impact on protein dynamics. Activation energies of local side chain dynamics were found to be similar between the different proteins being close to the energy, which is required for the rupture of single hydrogen bond in a protein. GENERAL SIGNIFICANCE: The measured dynamic quantities showed significant and systematic variations between the investigated species, suggesting that they are the signature of an evolutionary adaptation process stimulated by the different physiological environments of the respective protein.

Investigating H2 Sorption in a Fluorinated Metal-Organic Framework with Small Pores Through Molecular Simulation and Inelastic Neutron Scattering.

Simulations of H2 sorption were performed in a metal-organic framework (MOF) consisting of Zn(2+) ions coordinated to 1,2,4-triazole and tetrafluoroterephthalate ligands (denoted [Zn(trz)(tftph)] in this work). The simulated H2 sorption isotherms reported in this work are consistent with the experimental data for the state points considered. The experimental H2 isosteric heat of adsorption (Qst) values for this MOF are approximately 8.0 kJ mol(-1) for the considered loading range, which is in the proximity of those determined from simulation. The experimental inelastic neutron scattering (INS) spectra for H2 in [Zn(trz)(tftph)] reveal at least two peaks that occur at low energies, which corresponds to high barriers to rotation for the respective sites. The most favorable sorption site in the MOF was identified from the simulations as sorption in the vicinity of a metal-coordinated H2O molecule, an exposed fluorine atom, and a carboxylate oxygen atom in a confined region in the framework. Secondary sorption was observed between the fluorine atoms of adjacent tetrafluoroterephthalate ligands. The H2 molecule at the primary sorption site in [Zn(trz)(tftph)] exhibits a rotational barrier that exceeds that for most neutral MOFs with open-metal sites according to an empirical phenomenological model, and this was further validated by calculating the rotational potential energy surface for H2 at this site.

Analysis of the structure of nanocomposites of triglyceride platelets and DNA.

DNA-complexes with platelet-like, cationically modified lipid nanoparticles (cLNPs) are studied with regard to the formation of nanocomposite structures with a sandwich-like arrangement of the DNA and platelets. For this purpose suspensions of platelet-like triglyceride nanocrystals, stabilized by a mixture of two nonionic (lecithin plus polysorbate 80 or poloxamer 188) and one cationic stabilizer dimethyldioctadecylammonium (DODAB), are used. The structure of the platelets in the native suspensions and their DNA-complexes, ranging from the sub-nano to the micron scale, is investigated with small- and wide-angle scattering (SAXS, SANS, WAXS), calorimetry, photon correlation spectroscopy, transmission electron microscopy and computer simulations. The appearance of strong, lamellarly ordered peaks in the SAXS patterns of the DNA-complexes suggests a stacked arrangement of the nanocrystals, with the DNA being partially condensed between the platelets. This finding is supported with computer simulated small-angle scattering patterns of nanocrystal stacks, which can reproduce the measured small-angle scattering patterns on an absolute scale. The influence of the choice of the nonionic stabilizers and the amount of the cationic stabilizer DODAB on the structure of the native suspensions and the inner structure of their DNA-complexes is studied, too. Using high amounts of DODAB, lecithins with saturated acyl chains and polysorbate 80 instead of poloxamer 188 produces thinner nanocrystals, and thus decreases their repeat distances in the nanocomposites. Such nanocomposites could be of interest as DNA carriers, where the triglyceride platelets protect the sandwiched DNA from degradation.

Formation of liquid crystalline phases in aqueous suspensions of platelet-like tripalmitin nanoparticles.

Suspensions of platelet-like shaped tripalmitin nanocrystals stabilized by the pure lecithin DLPC and the lecithin blend S100, respectively, have been studied by small-angle x-ray scattering (SAXS) and optical observation of their birefringence at different tripalmitin (PPP) concentrations φ(PPP). It could be demonstrated that the platelets of these potential drug delivery systems start to form a liquid crystalline phase already at pharmaceutically relevant concentrations φ(PPP) of less than 10 wt. %. The details of this liquid crystalline phase are described here for the first time. As in a previous study [A. Illing et al., Pharm. Res. 21, 592 (2004)] some platelets are found to self-assemble into lamellar stacks above a critical tripalmitin concentration φ(PPP)(st) of 4 wt. %. In this study another critical concentration φ(PPP)(lc) ≈ 7 wt. % for DLPC and φ(PPP)(lc) ≈ 9 wt. % for S100 stabilized dispersions, respectively, has been observed. φ(PPP)(lc) describes the transition from a phase of randomly oriented stacked lamellae and remaining non-assembled individual platelets to a phase in which the stacks and non-assembled platelets exhibit an overall preferred orientation. A careful analysis of the experimental data indicates that for concentrations above φ(PPP)(lc) the stacked lamellae start to coalesce to rather small liquid crystalline domains of nematically ordered stacks. These liquid crystalline domains can be individually very differently oriented but possess an overall preferred orientation over macroscopic length scales which becomes successively more expressed when further increasing φ(PPP). The lower critical concentration for the formation of liquid crystalline domains of the DLPC-stabilized suspension compared to φ(PPP)(lc) of the S100-stabilized suspension can be explained by a larger aspect ratio of the corresponding tripalmitin platelets. A geometrical model based on the excluded volumes of individual platelets and stacked lamellae has been developed and successfully applied to reproduce the critical volume fractions for both, the onset of stack formation and the appearance of the liquid crystalline phase.

Mesoscopic Structure of Lipid Nanoparticle Formulations for mRNA Drug Delivery: Comirnaty and Drug-Free Dispersions.

Lipid nanoparticles (LNPs) produced by antisolvent precipitation (ASP) are used in formulations for mRNA drug delivery. The mesoscopic structure of such complex multicomponent and polydisperse nanoparticulate systems is most relevant for their drug delivery properties, medical efficiency, shelf life, and possible side effects. However, the knowledge on the structural details of such formulations is very limited. Essentially no such information is publicly available for pharmaceutical dispersions approved by numerous medicine agencies for the use in humans and loaded with mRNA encoding a mimic of the spike protein of the severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) as, e.g., the Comirnaty formulation (BioNTech/Pfizer). Here, we present a simple preparation method to mimic the Comirnaty drug-free LNPs including a comparison of their structural properties with those of Comirnaty. Strong evidence for the liquid state of the LNPs in both systems is found in contrast to the designation of the LNPs as solid lipid nanoparticles by BioNTech. An exceptionally detailed and reliable structural model for the LNPs i.a. revealing their unexpected narrow size distribution will be presented based on a combined small-angle X-ray scattering and photon correlation spectroscopy (SAXS/PCS) evaluation method. The results from this experimental approach are supported by light microscopy, 1H NMR spectroscopy, Raman spectroscopy, cryogenic electron microscopy (cryoTEM), and simultaneous SAXS/SANS studies. The presented results do not provide direct insights on particle formation or dispersion stability but should contribute significantly to better understanding the LNP drug delivery process, enhancing their medical benefit, and reducing side effects.

Correlation between supercoiling and conformational motions of the bacterial flagellar filament.

The bacterial flagellar filament is a very large macromolecular assembly of a single protein, flagellin. Various supercoiled states of the filament exist, which are formed by two structurally different conformations of flagellin in different ratios. We investigated the correlation between supercoiling of the protofilaments and molecular dynamics in the flagellar filament using quasielastic and elastic incoherent neutron scattering on the picosecond and nanosecond timescales. Thermal fluctuations in the straight L- and R-type filaments were measured and compared to the resting state of the wild-type filament. Amplitudes of motion on the picosecond timescale were found to be similar in the different conformational states. Mean-square displacements and protein resilience on the 0.1 ns timescale demonstrate that the L-type state is more flexible and less resilient than the R-type, whereas the wild-type state lies in between. Our results provide strong support that supercoiling of the protofilaments in the flagellar filament is determined by the strength of molecular forces in and between the flagellin subunits.

Collective intermolecular motions dominate the picosecond dynamics of short polymer chains.

Neutron scattering and extensive molecular dynamics simulations of an all atom C(100)H(202) system were performed to address the short-time dynamics leading to center-of-mass self-diffusion. The simulated dynamics are in excellent agreement with resolution resolved time-of-flight quasielastic neutron scattering. The anomalous subdiffusive center-of-mass motion could be modeled by explicitly accounting for viscoelastic hydrodynamic interactions. A model-free analysis of the local reorientations of the molecular backbone revealed three relaxation processes: While two relaxations characterize local bond rotation and global molecular reorientation, the third component on intermediate times could be attributed to transient flowlike motions of atoms on different molecules. The existence of these collective motions, which are clearly visualized in this Letter, strongly contribute to the chain relaxations in molecular liquids.