Biohydrogen from waste feedstocks: An energy opportunity for decarbonization in developing countries.

In developing economies, the decarbonization of energy sector has become a global priority for sustainable and cleaner energy system. Biohydrogen production from renewable sources of waste biomass is a good source of energy incentive that reduces the pollution. Biohydrogen has a high calorific value and emits no emissions, producing both energy security and environmental sustainability. Biohydrogen production technologies have become one of the main renewable sources of energy. The present paper entails the role of biohydrogen recovered from waste biomasses like agricultural waste (AW), organic fraction of municipal solid waste (OFMSW), food processing industrial waste (FPIW), and sewage sludge (SS) as a promising solution. The main sources of increasing yield percentage of biohydrogen generation from waste feedstock using different technologies, and process parameters are also emphasized in this review. The production paths for biohydrogen are presented in this review article, and because of advancements in R and D, biohydrogen has gained viability as a biofuel for the future and discusses potential applications in power generation, transportation, and industrial processes, emphasizing the versatility and potential for integration into existing energy infrastructure. The investigation of different biochemical technologies and methods for producing biohydrogen, including anaerobic digestion (AD), dark fermentation (DF), photo fermentation (PF), and integrated dark-photo fermentation (IDPF), has been overviewed. This analysis also discusses future research, investment, and sustainable energy options transitioning towards a low-carbon future, as well as potential problems, economic impediments, and policy-related issues with the deployment of biohydrogen in emerging nations.

Development of Rice Straw-derived Biochar-Bentonite Composite and its Application for in situ Sequestration of Ammonium and Phosphate Ions in the Degraded Mine Soil.

Nutrient pollution has a diverse impact on the environment and human health. The presence of nutrients, such as ammonium and phosphate, is ubiquitous in the environment due to their extensive use in agricultural land and leaching through non-point sources. In this context, biochar-based composites could play an essential role in improving the soil's nutrient retention capacity. The present study aims to develop bentonite-biochar composites (BNT@BC 400 and 600) and utilize them as an ameliorating material in the coal mine degraded soil to reduce the leaching of ammonium and phosphate ions. The bentonite-biochar composite (BNT@BC 400 and 600) was synthesized using the pristine rice straw-derived biochar using the solvothermal method. The biochar was produced at two different pyrolytic temperatures, 400 °C and 600 °C, and denoted as BC 400 and 600, respectively. Hence, the bentonite-biochar composite was denoted as BNT@BC 400 and 600. The BNT@BC 400 and 600 were characterized using the elemental, proximate, SEM, XRD, and FTIR analysis. Subsequently, the BNT@BC composites were evaluated for the adsorptive removal of NH4+ and PO43- ions using batch adsorption and column leaching studies. In the soil columns, the BNT@BC 400 and 600 were mixed with the soil at two different application rates, viz. 1 and 2.5% (w/w). The leaching characteristics data were fitted using three different fixed-bed models to predict the maximum adsorption capacity of the amended soil columns and the dominant mechanism of adsorption. Results indicated that the BNT@BC 600 showed the maximum adsorption capacity of 33.77 and 64.23 mg g-1 for the adsorption of NH4+ and PO43- ions, respectively. The dominant adsorption mechanisms in the aqueous solution were the electrostatic attraction, complexation, ion exchange, and precipitation processes. In the soil columns, the sorption of NH4+ and PO43- ions was governed by diffusive mass transfer and electrostatic interaction. Findings of the study indicated that incorporating the BNT@BC composite in the soil can significantly reduce the leaching of the NH4+ and PO43- ions and increase the overall soil fertility.

Challenges, opportunities, and innovations for effective solid waste management during and post COVID-19 pandemic.

The crisis brought upon by the COVID-19 pandemic has altered global waste generation dynamics and therefore has necessitated special attention. The unexpected fluctuations in waste composition and quantity also require a dynamic response from policymakers. This study highlights the challenges faced by the solid waste management sector during the pandemic and the underlying opportunities to fill existing loopholes in the system. The study presents specific cases for biomedical waste, plastic waste, and food waste management - all of which have been a major cause of concern during this crisis. Further, without active citizen participation and cooperation, commingled virus-laden biomedical waste with the regular solid waste stream pose significant negative health and safety issues to sanitation workers. Single-use plastic usage is set to bounce back due to growing concerns of hygiene, particularly from products used for personal protection and healthcare purposes. It is expected that household food waste generation may reduce due to increased conscious buying of more non-perishable items during lockdown and due to concerns of food shortage. However, there is a chance of increase in food waste from the broken supply chains such as food items getting stuck on road due to restriction in vehicle movements, lack of workers in the warehouse for handling the food products, etc. The study also stresses the need for building localized resilient supply chains to counter such situations during future pandemics. While offering innovative solutions to existing waste management challenges, the study also suggests some key recommendations to the policymakers to help handle probable future pandemics if any holistically.

Leaching of organic matter from cigarette butt filters as a potential disinfection by-products precursor.

The study aimed to evaluate cigarette butt filters (CBFs) as a potential source of dissolved organic carbon (DOC) in water leading to the formation of disinfection by-products. Two different forms of CBFs - intact (I) and disintegrated (D), as they occur in the environment, were selected for leaching in chlorinated (CI, CD), non-chlorinated (NI, ND), and highly chlorinated (HCD) water samples. The UV absorbance profiles of the leachate samples showed that intact CBFs exhibited higher DOC leaching compared to the disintegrated ones, which was further accentuated in chlorinated samples (CI > CD > NI > ND). The Fourier Transform Infrared spectra of the leachates revealed the presence of characteristic functional groups of cellulose acetate and its chlorinated derivatives, indicating the potential degradation of the polymer. Moreover, trihalomethane (THM) formation in chlorinated samples was relatively higher in CI samples (2 - 11.5 times) compared to CD, consistent with the DOC leaching trends. Further, the speciation characteristics of different THMs in both CI and CD samples were similar. Although spectral and morphological analyzes of CI and CD samples revealed negligible variation, HCD samples depicted significant surface roughness characterized by the formation of pits and holes, along with the evolution of crystallinity. This suggested accelerated degradation of CBFs and disruption of acetyl groups as a factor of elevated chlorine concentrations.

Phytotoxicity of trihalomethanes and trichloroacetic acid on Vigna radiata and Allium cepa plant models.

Disinfection by-products (DBPs) are a concern due to their presence in chlorinated wastewater, sewage treatment plant discharge, and surface water, and their potential for environmental toxicity. Despite some attention to their ecotoxicity, little is known about the phytotoxicity of DBPs. This study aimed to evaluate the individual and combined phytotoxicity of four trihalomethanes (THMs: trichloromethane (TCM), bromodichloromethane (BDCM), dibromochloromethane (DBCM), and tribromomethane (TBM) and their mixture (THM4)), and trichloroacetic acid (TCAA) using genotoxic and cytotoxic assays. The analysis included seed germination tests using Vigna radiata and root growth tests, mitosis studies, oxidative stress response, chromosomal aberrations (CA), and DNA laddering using Allium cepa. The results showed a progressive increase in root growth inhibition for both plant species as the concentration of DBPs increased. High concentrations of mixtures of four THMs resulted in significant (p < 0.05) antagonistic interactions. The effective concentration (EC50) value for V. radiata was 5655, 3145, 2690, 1465, 3570, and 725 mg/L for TCM, BDCM, DBCM, TBM, THM4, and TCAA, respectively. For A. cepa, the EC50 for the same contaminants was 700, 400, 350, 250, 450, and 105 mg/L, respectively. DBP cytotoxicity was observed through CAs, including C-metaphase, unseparated anaphase, lagging chromosome, sticky metaphase, and bridging. Mitotic depression (MD) increased with dose, reaching up to 54.4% for TCAA (50-500 mg/L). The electrophoresis assay showed DNA fragmentation and shearing, suggesting genotoxicity for some DBPs. The order of phytotoxicity for the tested DBPs was TCAA > TBM > DBCM > BDCM > THM4 > TCM. These findings underscore the need for further research on the phytotoxicity of DBPs, especially given their common use in agricultural practices such as irrigation and the use of sludge as manure.

Bioplastic packaging in circular economy: A systems-based policy approach for multi-sectoral challenges.

Bioplastics have long been publicized as a sustainable plastic packaging alternative; however, their widespread industrialization is still embryonic due to complex challenges spanning multiple sectors. This review critically analyses the bioplastic lifecycle and provides a holistic evaluation of both the opportunities and potential trade-offs along their value chain. Their lifecycle is divided into three sectors: 1) resources, extraction, and manufacturing, 2) product consumption which discusses availability, consumer perception, and marketing strategies, and 3) end-of-life (EoL) management which includes segregation, recycling, and disposal. In the production phase, the primary challenges include selection of suitable raw feedstocks and addressing the techno-economic constraints of manufacturing processes. To tackle these challenges, it is recommended to source sustainable feedstocks from innovative, renewable, and waste materials, adopt green synthesis mechanisms, and optimize processes for improved efficiency. The consumption phase encompasses challenges related to market availability, cost competitiveness, and consumer perception of bioplastics. Localizing feedstock sourcing and production, leveraging the economics of scale, and promoting market demand for recycled bioplastics can positively influence the market dynamics. Additionally, dispelling misconceptions about degradability through proper labeling, and employing innovative marketing strategies to enhance consumer perception of the mechanical performance and quality of bioplastics is crucial. During the EoL management phase, major challenges include inadequate awareness, inefficient segregation protocols, and bioplastics with diverse properties that are incompatible with existing waste management infrastructure. Implementing a standardized labeling system with clear representation of suitable EoL techniques and integrating sensors and machine learning-based sorting technologies will improve segregation efficiency. Further, establishing interconnected recycling streams that clearly define the EoL pathways for different bioplastics is essential to ensure circular waste management systems. Finally, designing a comprehensive systems-based policy framework that incorporates technical, economic, environmental, and social drivers is recommended to promote bioplastics as a viable circular packaging solution.

Co-pyrolysis of plastic waste and eucalyptus waste wood for fuel pellets production: A study of fuel, mechanical, and combustion characteristics under varying binder proportion.

The study explores the effect of varying molasses proportions as a binder on the characteristics of densified char obtained through the slow co-pyrolysis of plastic waste and Eucalyptus wood waste (Waste low-density polyethylene - Eucalyptus wood (WLDPE-EW) and Waste Polystyrene - Eucalyptus wood (WPS-EW)). Pyrolysis was conducted at 500 °C with a residence time of 120 min, employing plastic to wood waste ratios of 1:2 and 1:3 (w/w). The focus was on how varying the proportion of molasses (10-30 %), influences the physical and combustion properties of the resulting biofuel pellets. Our findings reveal that the calorific value of the pellets decreased from 28.94 to 27.44 MJ/Kg as the molasses content increased. However, this decrease in calorific value was compensated by an increase in pellet mass density, which led to a higher energy density overall. This phenomenon was attributed to the formation of solid bridges between particles, facilitated by molasses, effectively decreasing particle spacing. The structural integrity of the pellets, as measured by the impact resistance index, improved significantly (43-47 %) with the addition of molasses. However, a significant change in the combustion characteristics depicted by lower ignition and burnout temperatures were observed due to decrease in fixed carbon value and increase in volatile matter content, as the proportion of molasses increased. Despite these changes, the pellets demonstrated a stable combustion profile, suggesting that molasses are an effective binder for producing biofuel pellets through the densification of char derived from the co-pyrolysis of plastic and Eucalyptus wood waste. The optimized molasses concentration analyzed through multifactor regression analysis was 16.96 % with 28 % WLDPE proportion to produce WLDPE-EW char pellets. This study highlights the potential of using molasses as a sustainable binder to enhance the mechanical and combustion properties of biofuel pellets, offering a viable pathway for the valorization of waste materials.

Life cycle assessment of fermentative production of lactic acid from bread waste based on process modelling using pinch technology.

Bread waste (BW), a rich source of fermentable carbohydrates, has the potential to be a sustainable feedstock for the production of lactic acid (LA). In our previous work, the LA concentration of 155.4 g/L was achieved from BW via enzymatic hydrolysis, which was followed by a techno-economic analysis of the bioprocess. This work evaluates the relative environmental performance of two scenarios - neutral and low pH fermentation processes for polymer-grade LA production from BW using a cradle-to-gate life cycle assessment (LCA). The LCA was based on an industrial-scale biorefinery process handling 100 metric tons BW per day modelled using Aspen Plus. The LCA results depicted that wastewater from anaerobic digestion (AD) (42.3-51 %) and cooling water utility (34.6-39.5 %), majorly from esterification, were the critical environmental hotspots for LA production. Low pH fermentation yielded the best results compared to neutral pH fermentation, with 11.4-11.5 % reduction in the overall environmental footprint. Moreover, process integration by pinch technology, which enhanced thermal efficiency and heat recovery within the process, led to a further reduction in the impacts by 7.2-7.34 %. Scenario and sensitivity analyses depicted that substituting ultrapure water with completely softened water and sustainable management of AD wastewater could further improve the environmental performance of the processes.

Cigarettes butt littering: The story of the world's most littered item from the perspective of pollution, remedial actions, and policy measures.

Cigarettes butt (CB) is one of the most littered items on the planet. This paper critically analyzes the factors responsible for CB littering, and associated environmental ramifications, and reviews all the possible technical, behavioural, and policy-based solutions. Even while smoking has declined globally, middle-income nations have seen an increase in consumption, which may be related to increased affordability and a lack of public awareness. The smokers' individual beliefs and habits, environmental ignorance, covert littering as a result of social taboos associated with smoking, and behavioural gaps between intention and action might all be contributing factors to CBs' littering behaviour. The low biodegradability of cellulose acetate filters and toxic chemical leaching from CBs are the most important aspects of CB environmental toxicity. The small size and low economic value of CB contribute to the inefficiencies of current waste collection and management systems. The current research on CB valorisation includes fired-clay bricks, asphalt concrete, biofilms, sound absorber, cellulose pulp, pesticides, and insecticides as downstream mitigation strategies. This study highlights the urgent need for policymakers to enforce regulations enabling innovative cigarette designs, the creation of deposit-refund schemes, extended producer responsibility and stringent waste collection mechanisms. Adopting gentler marketing strategies and non-confrontational behavioural nudges could result in an overall reduction in CB pollution.

Study on the process wastewater reuse and valorisation during hydrothermal co-carbonization of food and yard waste.

The commercial success of hydrothermal carbonization (HTC) is contingent on seeking solutions for the downstream wastewater (process water) generated during the process which is still regarded largely as a nuisance. In the present study, the reusability and valorization strategy of process wastewater generated during co-HTC of organic fraction of municipal solid waste (food and yard waste) at 220 °C for 1 h was established. The process wastewater was anaerobically digested in the first part to determine its methane-generating capacity; and in the second part, it was recirculated up to five times to understand the evolution of physicochemical and fuel characteristics of hydrochar. The process water was characterized by the presence of high total organic carbon (up to 40 g/L) and chemical oxygen demand (up to 96 g/L). The decreasing trend of heavy metals with increasing recirculation suggested possible adsorption/immobilization mechanism taking place to the hydrochar surface. The process water generated from co-HTC condition has anaerobic biodegradability of 72% while experimental and theoretical methane yield observed were 224 mL/g COD and 308 mL/g COD, respectively. The presence of high organic and ionic species in recirculated process water promoted the overall carbonization process which was evident from the increased energy yield (86 to 92%), carbon content (68 to 71%) and calorific value (20 to 27 MJ/kg). The recirculation also enhanced overall combustion characteristics of hydrochar as analyzed by thermogravimetric analysis. The recirculation strategy enhanced fuel properties of hydrochar while making sure upstream and downstream water related burden is reduced (as illustrated by life cycle analysis) to create a cleaner production system for renewable solid biofuels production.

Char from the co-pyrolysis of Eucalyptus wood and low-density polyethylene for use as high-quality fuel: Influence of process parameters.

Providing a valuable application to the under-utilized solid residue of co-pyrolysis of biomass and plastics could substantially improve economic and environmental sustainability of the process, thereby fostering circular economy. This study focuses on the variation of thermal and physiochemical characteristics of solid char, produced from the co-pyrolysis of waste low-density polyethylene (WLDPE) and Eucalyptus wood with varying pyrolysis temperatures from 300 to 550 °C, residence times of 90-150 min, and relative percentage of 33% and 25% (w/w) WLDPE in the feedstock. The highest values of yield (37%), energy density (1.25) and high heat value (31 MJ/Kg) were observed with the char produced at 300 °C. The physical inhibition caused by the overlaying plastic coating on the surface of the char below 450 °C resulted in the same. However, with the increase in temperature, increase in fuel ratio by 78-79% and fixed carbon content by 68-69% were observed. The highest concentrations of fixed carbon (39%), fuel ratio (0.81) along with the lowest O/C and H/C ratios (0.07 and 0.13) were observed with the chars produced above 450 °C depicting their high degree of carbonization. The fuel value indices of all the chars were > 500 GJ/m3 indicating their suitability as high-quality fuels. Significant influences of residence time and feedstock ratio were also observed on properties of the char. The analysis of variance and principal component analysis also depicted significant variations in the properties of the char produced below and above the temperatures of 450 °C due to the inhibitory and synergetic effects. While the chars produced at 300-350 °C could be used for combustion/co-combustion in coal-fired boilers, chars produced above 450 °C can be opted as household fuel due to their low losses of energy, water vapour, and smoke during combustion.

Evaluation of heavy metal leaching under simulated disposal conditions and formulation of strategies for handling solar panel waste.

With the steady growth in the worldwide solar installed capacity, there is an immediate concern about the fate of the solar panels at the end of their life. Solar panel waste is often disposed of indiscriminately, exposing the environment to chemical hazards. The major objective of the current study was to evaluate the leaching potential of the polycrystalline solar panel waste under different simulated disposal conditions through toxicity characteristic leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP) and pH static leaching procedure tests. Moreover, the study evaluates the effects of ageing and the breakage of the Glass Laminate Encapsulation (GLE) of solar panels on their leaching potential. Among the metals studied (silver (Ag), aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), manganese (Mn), lead (Pb), and zinc (Zn)), the concentrations of Pb were as high as 9.3 mg/L, 1.4 mg/L, 6.7 mg/L in the TCLP, SPLP, and pH static test respectively. This indicated the hazardous nature of the waste with leaching potential of Pb above the permissible limits stipulated by various regulatory bodies. The presence of GLE reduced the mobility of Pb by a factor of 4.1-8.8 in the TCLP test, thereby rendering the waste as non-hazardous for its disposal in a landfill. However, the indiscriminate disposal of solar panel waste in the natural environment as simulated by the SPLP test indicated its harmful nature irrespective of the physical condition. Ageing of the solar panels before disposal and acidic pH conditions also positively influenced the leaching potential of the selected metals subjected to their reactivity and the accessibility of internal layers of waste to the leaching solution. Strategies such as extended producer responsibilty, advance-recycling fee, and incentivizing the recycling industry will lead to both economic benefit creation and effective waste management of this waste stream.

(3-Aminopropyl)triethoxysilane and iron rice straw biochar composites for the sorption of Cr (VI) and Zn (II) using the extract of heavy metals contaminated soil.

Heavy metals like Cr (VI), when released into the environment, pose a serious threat to animal and human health. In this study, iron and (3-Aminopropyl)triethoxysilane (APTES) biochar composites were prepared from the biochar, which was produced through the pyrolysis of rice straw at 400 and 600 °C, using the chemical processes with an aim that the doping of pristine biochar structure with the Fe and NH2 radicals would enhance the removal of Cr (VI) and Zn (II) adsorption in both aqueous solution and soil. Both biochar composites were mixed at a rate of 3% (w/w) with the mine soil for the soil incubation test, and after completion of the test, a soil fertility index (SFI) was calculated. Results showed that both iron and APTES biochar composites followed the Langmuir-Freundlich isotherm showing the maximum removal capacity of 100.59 mg/g for Cr (VI) by APTES/SiBC 600 and maximum adsorption capacity of 83.92 mg/g for Zn2+ by Fe/BC 400. The SFI of the mine-soil amended with both Fe and APTES biochar composites were 16.67 and 13.04%, respectively higher than the controlled study. The mitotic index of the A. cepa cells that grew up in the soil amended with Fe/BC and APTES/SiBC were 40.47 and 44.45%, respectively, higher than the controlled study. The results indicated that the incorporation of the Fe and APTES biochar composites in the soil effectively reduced the metal toxicity and improved the soil physicochemical properties. This study opens up the prospects of using biochar composites in contaminated soil and water treatments.

Challenges and strategies for effective plastic waste management during and post COVID-19 pandemic.

The advent of the COVID-19 pandemic has enhanced the complexities of plastic waste management. Our improved, hyper-hygienic way of life in the fear of transmission has conveniently shifted our behavioral patterns like the use of PPE (Personal protective equipment), increased demand for plastic-packaged food and groceries, and the use of disposable utensils. The inadequacies and inefficiencies of our current waste management system to deal with the increased dependence on plastic could aggravate its mismanagement and leakage into the environment, thus triggering a new environmental crisis. Mandating scientific sterilization and the use of sealed bags for safe disposal of contaminated plastic wastes should be an immediate priority to reduce the risk of transmission to sanitation workers. Investments in circular technologies like feedstock recycling, improving the infrastructure and environmental viability of existing techniques could be the key to dealing with the plastic waste fluxes during such a crisis. Transition towards environmentally friendly materials like bioplastics and harboring new sustainable technologies would be crucial to fighting future pandemics. Although the rollbacks and relaxation of single-use plastic bans may be temporary, their likely implications on the consumer perception could hinder our long-term goals of transitioning towards a circular economy. Likewise, any delay in building international willingness and participation to curb any form of pollution through summits and agendas may also delay its implementation. Reduction in plastic pollution and at the same time promoting sustainable plastic waste management technologies can be achieved by prioritizing our policies to instill individual behavioral as well as social, institutional changes. Incentivizing measures that encourage circularity and sustainable practices, and public-private investments in research, infrastructure and marketing would help in bringing the aforementioned changes. Individual responsibility, corporate action, and government policy are all necessary to keep us from transitioning from one disaster to another.

Circular economy approach in solid waste management system to achieve UN-SDGs: Solutions for post-COVID recovery.

The COVID-19 pandemic and the ensuing socioeconomic crisis has impeded progress towards the UN Sustainable Development Goals (UN-SDGs). This paper investigates the impact of COVID 19 on the progress of the SDGs and provides insight into how green recovery stimulus, driven by circular economy (CE)-based solid waste management (SWM) could assist in attaining the intended targets of UN-SDG. It was understood in this review that the guiding principles of the UN-SDGs such as, public health, environmental concerns, resource value and economic development are similar to those that have driven the growth of waste management activities; thus, in order to achieve the goals of UN-SDG, a circular economy approach in solid waste management system should be prioritized in the post-COVID economic agenda. However, policy, technology and public involvement issues may hinder the shift to the CE model; therefore, niche growth might come from developing distinctive waste management-driven green jobs, formalizing informal waste pickers and by focusing in education and training of informal worker. The review also emphasized in creating green jobs by investing in recycling infrastructure which would enable us to address the climate change related concerns which is one of the key target of UN- SDG. The CE-based product designs and business models would emphasize multifunctional goods, extending the lifespan of products and their parts, and intelligent manufacturing to help the public and private sectors maximise product utility (thus reducing waste generation) while providing long-term economic and environmental benefits. The study also recommended strong policies that prioritized investments in decentralization of solid waste systems, localization of supply chains, recycling and green recovery, information sharing, and international collaboration in order to achieve the UN-SDGs.