Morphological and Biological Evaluations of Human Periodontal Ligament Fibroblasts in Contact with Different Bovine Bone Grafts Treated with Low-Temperature Deproteinisation Protocol.

Several types of deproteinised bovine bone mineral (DBBM) are available on the market, and each one is obtained with a thermic and chemical process that can differ, achieving different results. Currently, several protocols using low temperature are suggested to reduce the possible particle crystallisation during the production process. This study aimed to evaluate the biomorphological reaction of periodontal fibroblast cultures in contact with different DBBM particles treated with a low-temperature protocol (Thermagen®) and without exposure to sodium hydroxide (NaOH). Morphological evaluation was performed using light, confocal laser, and scanning electron microscopy, and the biological reaction in terms of proliferation was performed using an XTT proliferation assay at 24 h (T1), 72 h (T2), and 7 days (T3). The morphological analysis highlighted how the presence of the materials stimulated a change in the morphology of the cells into a polygonal shape, surface reactions with the thickening of the membrane, and expression of actin. In particular, the morphological changes were appreciable from T1, with a progressive increase in the considered morphological characteristics at T2 and T3 follow-ups. The proliferation assay showed a statistical significance between the different experimental materials and the negative control in T2 and T3 follow-ups. The post hoc analysis did not reveal any differences between the materials. In conclusion, the grafts obtained with the low-temperature extractions protocol and not exposed to NaOH solution showed positive morphological reactions with no differences in the sizes of particles.

Bio-Morphological Reaction of Human Periodontal Ligament Fibroblasts to Different Types of Dentinal Derivates: In Vitro Study.

Understanding the biological and morphological reactions of human cells towards different dentinal derivate grafting materials is fundamental for choosing the type of dentin for specific clinical situations. This study aimed to evaluate human periodontal ligament fibroblasts (hPLF) cells exposed to different dentinal derivates particles. The study design included the in vitro evaluation of mineralized dentine (SG), deproteinized and demineralized dentine (DDP), and demineralized dentine (TT) as test materials and of deproteinized bovine bone (BIOS) as the positive control material. The materials were kept with the hPLF cell line, and the evaluations were made after 24 h, 72 h, and 7 days of in vitro culture. The evaluated outcomes were proliferation by using XTT assays, the morphological characteristics by light microscopy (LM) and by the use of scanning electron microscopy (SEM), and adhesion by using confocal microscopy (CLSM). Overall, the experimental materials induced a positive response of the hPLFs in terms of proliferation and adhesion. The XTT assay showed the TT, and the SG induced significant growth compared to the negative control at 7 days follow-up. The morphological data supported the XTT assay: the LM observations showed the presence of densely packed cells with a modified shape; the SEM observations allowed the assessment of how fibroblasts exposed to DDP and TT presented cytoplasmatic extensions; and SG and BIOS also presented the thickening of the cellular membrane. The CLMS observations showed the expression of the proliferative marker, as well as and the expression of cytoskeletal elements involved in the adhesion process. In particular, the vinculin and integrin signals were stronger at 72 h, while the actin signal remained constantly expressed in all the follow-up of the sample exposed to SG material. The integrin signal was stronger at 72 h, and the vinculin and actin signals were stronger at 7 days follow-up in the sample exposed to DDP material. The vinculin and integrin signals were stronger at 72 h follow-up in the sample exposed to TT material; vinculin and integrin signals appear stronger at 24 h follow-up in the sample exposed to BIOS material. These data confirmed how dentinal derivates present satisfying biocompatibility and high conductivity and inductivity properties fundamental in the regenerative processes. Furthermore, the knowledge of the effects of the dentin's degree of mineralization on cellular behavior will help clinicians choose the type of dentine derivates material according to the required clinical situation.

Collagen Fibres Orientation in the Bone Matrix around Dental Implants: Does the Implant's Thread Design Play a Role?

The aim of this study was to analyse the influence of different thread shapes of titanium dental implant on the bone collagen fibre orientation (BCFO) around loaded implants. Twenty titanium dental implants, divided for thread shapes in six groups (A-F) were analysed in the present study. All implants were immediately loaded and left in function for 6 months before retrieval. The parameters evaluated under scanning electron microscope were the thread width, thread depth, top radius of curvature, flank angle, and the inter-thread straight section. Two undecalcified histological sections were prepared from each implant. Birefringence analysis using circularly polarized light microscopy was used to quantitively measure BCFO. For groups A-F, respectively, transverse BCFO was 32.7%, 24.1%, 22.3%, 18.2%, 32.4%, and 21.2%, longitudinal BCFO was 28.2%, 14.5%, 44.9%, 33.1%, 37.7%, and 40.2%. The percentage differences between transverse and longitudinal orientation were 4.50% (A), 9.60% (B), -22.60% (C), -14.90% (D), -5.30% (E), and -19.00% (F). Following loading, the amount of transverse and longitudinal BCFO were significantly influenced by the thread shape. The greater flank angles and narrower inter-thread sections of the "V" shaped and "concave" shaped implant threads of groups A and B, respectively, promoted the predominance of transverse BCFO, compared to groups C-F (p < 0.05). A narrow inter-thread straight section promotes transverse BCFO, as do "V" shaped and "concave" shaped threads, which can thus be considered desirable design for implant threads.

The Relationship Between Time of Retightening and Preload Loss of Abutment Screws for Two Different Implant Designs: An In Vitro Study.

The loosening of an abutment screw is one of the most frequent complications in implant-prosthetic rehabilitation, especially for single-crown cemented prostheses. This complication is due to several mechanical factors including type of connection, abutment-screw geometry, settling effects, and cyclical load. The purpose of the present in vitro study was to compare and associate different times of retightening with reductions in preload losses. We evaluated 40 internal hexagon dental implants and 40 external hexagon dental implants, with their related abutment screws. The implants were embedded in acrylic resin in cylindrical polyvinyl chloride tubes (26 mm diameter, 20 mm height). The abutments were fixed to the implants with screws to an initial torque of 35 Ncm using a digital torque meter with decimal precision. Two different types of connection were randomly divided in 4 subgroups of 10 samples each. One subgroup was used as control. The test groups underwent retightening to the same initial torque at increasing times from initial torque application for tightening of the abutment screws, to their retightening at 2 minutes, 5 minutes, and 10 minutes. The retightening time of 2 minutes shows significantly reduced preload loss. Randomized clinical trials are strongly required to provide clinicians with a beneficial standardized protocol of retightening that can be applied in routine clinical practice.

Evaluation of defects in surface detail for monophase, 2-phase, and 3-phase impression techniques: an in vitro study.

STATEMENT OF THE PROBLEM: Polyvinyl siloxane materials of various consistencies have been tested to reduce defects commonly associated with different definitive impression techniques. PURPOSE: The purpose of this in vitro study was to compare the number of visible defects within the surface of a new 3-phase, 2-step impression injection technique with the number found in the monophase and in the conventional 2-phase, 1-step and 2-phase, 2-step impression techniques. MATERIAL AND METHODS: Two complete crown abutment preparations were impressed 10 times for each of these 4 techniques, which gave 20 abutment impressions for each group. The 3-phase, 2-step impression--injection technique included extra-light--body impression material added for the impression and injected after reinsertion. After the removal of all of these impressions, an examiner counted the number of open voids and bubble-like enclosed voids visible to the naked eye at a working distance of approximately 150 mm. Only the defects in the area of the prepared abutments were included in the assessment. RESULTS: The frequency of defects ranged from 100% of the impressions in the monophase group to 5% with the new 3-phase, 2-step impression injection technique. No statistical differences were seen between the two 2-phase (1-step and 2-step) impression techniques, although there were numerically fewer impressions with defects with 2 steps (45%) than with 1 step (55%). The 3-phase, 2-step impression injection technique had the greatest accuracy, with fewer specimens with defects (5%) than with either of the 2-phase techniques, although these differences did not reach statistical significance. CONCLUSIONS: The 3-phase, 2-step impression injection technique provides improved defect-free reproduction of detail, showing fewer defects than other impression techniques.

Plasmacytoma in the Maxillary Jaw: A Diagnostic and Therapeutic Challenge.

Plasmacytoma is a neoplastic disorder originating from plasma cells, with bone and soft tissue being common sites of manifestation. This report presents the clinical and radiological findings of a 65-year-old female patient who presented with an exophytic lesion in the upper right lateral incisor region. The lesion appeared as a unilocular radiotransparent area in imaging tests. Following an excisional biopsy, histological and immunohistochemical evaluations confirmed the presence of mature plasmacellular elements and small infiltrates of B and T lymphocytes. The patient did not exhibit systemic manifestations of multiple myeloma. Surgical intervention, in the form of enucleation of the lesion combined with root canal treatment and apicoectomy, was performed. This case underscores the rare occurrence of plasmacytoma in the jaw region and highlights the importance of surgical management in cases where structural damage or functional impairment is present. Further research on novel treatment approaches is also mentioned, including targeted therapies, immunomodulatory agents, and monoclonal antibodies. The patient is currently under the care of a hematologist for further investigation and the choice of the most appropriate therapy.

Anatomy of Maxillary Sinus: Focus on Vascularization and Underwood Septa via 3D Imaging.

The study of the maxillary sinus anatomy should consider the presence of two features of clinical importance. The arterial supply course and the presence of the so-called Underwood septa are two important factors to consider when planning surgical treatment to reduce the risk of surgical complications such as excessive bleeding and Schneiderian membrane perforations. This study aimed to investigate the above-mentioned anatomical structures to improve the management of eventual vascular and surgical complications in this area. This study included a total of 200 cone-beam computed topographies (CBCTs) divided into two groups of 100 CBCTs to evaluate the arterial supply (AAa) course through the lateral sinus wall and Underwood's septa, respectively. The main parameters considered on 3D imaging were the presence of the AAa in the antral wall, the length of the arterial pathway, the height of the maxillary bone crest, the branch sizes of the artery in the first group, and the position of the septa, the length of the septa, and their gender associations in the second group. The CBCT analysis showed the presence of the arterial supply through the bone wall in 100% of the examined patients, with an average size of 1.07 mm. With regard to the septa, 19% of patients presented variations, and no gender difference was found to be statistically significant. The findings add to the current understanding of the clinical structure of the maxillary sinus, equipping medical professionals with vital details for surgical preparation and prevention of possible complications.

Platelets' Role in Dentistry: From Oral Pathology to Regenerative Potential.

Platelets are a cellular subgroup of elements circulating in the bloodstream, responsible for the innate immunity and repairing processes. The diseases affecting this cellular population, depending on the degree, can vary from mild to severe conditions, which have to be taken into consideration in cases of minor dental procedures. Their secretion of growth factors made them useful in the regenerative intervention. The aim of this review is to examine the platelets from biological, examining the biogenesis of the platelets and the biological role in the inflammatory and reparative processes and clinical point of view, through the platelets' pathology and their use as platelets concentrates in dental regenerative surgery.

Prevalence and Characteristics of Accessory Mandibular Canals: A Cone-Beam Computed Tomography Study in a European Adult Population.

The purpose of this observational study is to evaluate the prevalence and main characteristics of bifid canals within a European adult population, analyzing cone-beam-computed tomography (CBCT). The population study examined 300 subjects. The CBCTs were performed between 2012 and 2019, using PaX-Zenith3D with a standard protocol of acquisition. The parameters analyzed were the presence and lengths of the bifid mandibular canals. The sample included 49% male and 51% female participants. The mean age of the patients was 47.07 ± 17.7 years. Anatomical variants of the mandibular canal were identified in 28.8% of the sides and 50.3% of the patients. In 7.3% of the subjects, the anatomical variants were present bilaterally. The most frequently encountered bifid canal was Type 3 (40.5%), followed by the Type 1 canal (39.3%), the Type 2 canal (14.5%), and the Type 4 canal (5.9%), 40% on the right side and 60% on the left side. The average length of the bifid canals located on the right side of the mandible was 11.96 ± 5.57 mm, compared to 11.38 ± 4.89 mm for those measured on the left side. The bifid mandibular canal is a common anatomical variation of the mandibular canal. It is fundamental to performing an accurate preoperative evaluation using CBCT analysis to avoid and/or reduce intraoperative and postoperative complications.

Dental Education Challenges during the COVID-19 Pandemic Period in Italy: Undergraduate Student Feedback, Future Perspectives, and the Needs of Teaching Strategies for Professional Development.

The COVID-19 pandemic literally stopped most human movement and activities as it initially spread, which included dental practices and dental education. This defined the need for significative changes in teaching and learning with the use of "e-learning" methods, also for traineeships. This study was designed to determine the undergraduate student perception of these new methods as part of their education. This involved 353 students attending the Dental School of the G. D'Annunzio University of Chieti-Pescara, from the first to the sixth years. A questionnaire in Italian and was set-up using "Google Forms" and sent by email to the students. The questionnaire was divided into three parts: the first part included questions for general information, including age, sex and year of course; the second part had multiple choice questions related to their evaluation of the e-learning teaching, using a scale of opinion in the replies to each question (e.g., "scarce", "fair", "satisfying", "very good" and "excellent"); and the third part included two open questions to indicate the strengths and limitations of these new teaching and learning approaches. The categorical variables in the first and second parts of the questionnaire were evaluated using Chi squared tests, setting significance at p < 0.05, while the comments were evaluated qualitatively. The student feedback showed significant appreciation (p < 0.05) of the new methods and the efforts that the lecturers put in to provide lectures of as high a quality as possible. However, a lack of practical training was significantly perceived as an important problem in the structure of their new curriculum (p < 0.05). COVID-19 has been an epic tragedy that has hit the human population not only in terms of health and healthcare, but also quality of life. This includes the quality of dental education within universities. However, the pandemic can be seen to also represent motivation to invest in the necessary technological innovation to deliver the best possible education to our future dentists.

Guest Commentary: The Battle of File Formats from Intraoral Optical Scanners.

No abstract available.

Exposure to persistent organic pollutants during tooth formation: molecular mechanisms and clinical findings.

Persistent organic pollutants (POPs) constitute a relevant part of environmental pollution. POPs are chemical compounds that persist for a long time in the environment, bio-accumulate in the human body and determine significant adverse consequences to human health. The characteristics of these substances are lipo-affinity, semi-volatility and resistance to the degradation processes. Results deriving from several different studies attest that exposure to the main classes of POPs results in multiple toxic effects on humans and experimental animal models. Among the various alterations caused by exposition to and bio-accumulation of POPs, there are abnormalities in tooth formation and related hard dental tissue structure, especially enamel. This review aimed to describe the close association between the exposure of these compounds during the development of the tooth germ and the occurrence of tooth structural anomalies. Indeed, structural defects of the enamel have as possible consequences higher susceptibility of the tooth to caries disease and higher fragility of the crown to the occlusal trauma.

Penetration of Different Impression Materials into Exposed Dentinal Tubules during the Impression Procedure.

Adhesive restorations have been shown to guarantee excellent performance and longevity, although this comes with some disadvantages. Among these, the vulnerability of dentine to different agents has been widely evaluated. The aim of this study was to evaluate the possible penetration of impression materials into freshly cut dentine. Dentine from 27 teeth was impressed with polyether (Impregum Penta L) (nine teeth) and with polyvinyl siloxane (Aquasil Ultra LV) (nine teeth). The surface of nine teeth after the impressions were used as the control. Specifically, the extroflections caused by the imprinting of the dentinal tubules on the impression material, the so-called impression tags, were measured. Furthermore, the presence of the material inside the tubules was examined. Scanning electron microscopy analysis showed material tags for all of the experimental groups. The mean lengths (±SD) were 22.6 (±11.0) µm for polyether, 21.8 (±12.8) µm for polyvinyl siloxane and 11.3 (±7.0) µm for the tooth control, with mean diameters (±SD) of 2.8 (±0.5), 2.4 (±0.7) and 3.1 (±0.7) µm, respectively. Fractal analysis showed fractal dimensions of 1.78 (±0.03), 1.77 (±0.03) and 1.71 (±0.03), respectively. These data demonstrated that the impression materials can remain inside the dentinal tubules, which can adversely affect the adhesive procedures.

3D Human Periodontal Stem Cells and Endothelial Cells Promote Bone Development in Bovine Pericardium-Based Tissue Biomaterial.

Bone defects repair represents a public and urgent problem in clinical practice, in fact, every year, more than two million patients required new treatments for bone injuries. Today a complete vascularization is strategic in bone formation, representing a new frontier for clinical application. Aim of this research has been developed a three-dimensional (3D) coculture platform using a bovine pericardium collagen membrane (BioR) loaded with human periodontal ligament stem cells (hPDLSCs) and endothelial differentiated cells from hPDLSCs (E-hPDLSCs) able to undergo toward osteoangiogenesis differentiation process. First, we have characterized at confocal laser scanning microscopy (CLSM) level the E-hPDLSCs phenotype profile, through CD31 and CD34 markers expression and the ability to tube vessel formation. Real Time-Polimerase Chain Reaction (RT-PCR) and western blotting analyses revealed the upregulation of Runt-related transcription factor 2 (RUNX2), Collagen 1A1 (COL1A1), Vascular Endothelial Growth Factor-A (VEGF-A) genes and proteins in the living construct composed by hPDLSCs + E-hPDSCs/BioR. Human PDLSCs + E-hPDLSCs/BioR construct showed also an enhacement of de novo synthesis of osteocalcin. Given that, the extracellular-signal-regulated kinase (ERK)/mitogen activated protein kinase (MAPK) transduction signaling was involved in the osteogenesis and angiogenesis process, the ERK1/2 protein level at biochemical level, in our experimental model, has been investigated. Our results evidenced an upregulation of ERK1/2 proteins level born in the living construct. In conclusion, we believe that the use of the hPDLSCs and E-hPDLSCs coculture togheter with BioR as substrate, could represent an efficient model able to activate through ERK1/2 signaling pathway the osteoangiogenesis process, and then representing a new potential engineered platform for surgeons during the repair and the healing of bone defects.

Prevalence of dental caries in schoolchildren living in rural and urban areas: results from the first region-wide Italian survey.

PURPOSE: The collection of comprehensive epidemiological data for dental caries of Italian schoolchildren in both rural and urban areas. MATERIALS AND METHODS: The dft and DMFT indices were recorded from 27163 6-to-9-year-old children attending the primary schools of Abruzzo, a region of Central Italy, according to the World Health Organization recommendations. RESULTS: The number of surveyed children were 5413, 8359, 8362 and 5026 in the 6-, 7-, 8- and 9-year-old groups respectively; the percentages of children positive for caries were 39.5, 48.3, 54.4 and 60.8 respectively. The mean dft (SD) values of the age groups were 1.57 (2.67), 1.79 (2.59), 1.88 (2.47) and 2.02 (2.45) respectively, with mean DMFT (SD) values of 0.07 (0.37), 0.18 (0.62), 0.37 (0.90) and 0.55 (1.09) respectively. All outcomes were significantly greater in schoolchildren living in rural areas compared with those living in urban areas, and these differences were more pronounced in the permanent dentition of the older groups. Of particular note, there was a SiC Index (DMFT) of 2.22 for the 9-year-old children living in rural areas. CONCLUSION: This survey initially reports the dental caries prevalence in a very large sample of Italian schoolchildren and shows that the WHO global goal for 2000 has been largely achieved in 6-year-old children, although more efforts are needed to reach the new global goal for 2015. The large differences in caries prevalence between different areas (rural and urban) and their behaviour related to the age group of the samples constitute useful findings if prevention programs are to be established in Italy.

Shear bond strength, bond failure, and scanning electron microscopy analysis of a new flowable composite for orthodontic use.

A new dental flowable composite, Denfil Flow, was evaluated for the bonding of orthodontic brackets by determining its shear bond strength (SBS) and the mode of bond failure after debonding. Eighty extracted human premolars were divided into two equal groups. Metal brackets were bonded to etched enamel using a composite resin control (Transbond XT) or Denfil Flow. After 72 hours of incubation in saline solution at 37 degrees C, debonding was performed with a shearing force. The SBS and the mode of bond failure were examined. In addition, representative samples from each group were examined by scanning electron microscopy (SEM). No significant difference was observed in the SBS between the groups, and a clinically acceptable SBS was found for the two adhesives. Bond failures occurred mostly in the bracket-adhesive interface, without significant differences between the groups. At SEM analysis, Denfil Flow showed a greater frequency of air bubbles within the resin than did Transbond XT. In conclusion, Denfil Flow displayed the same SBS as traditional composite resins and similar bond failures. Further clinical studies are required.

Sexual dimorphism of canine volume: a pilot study.

Sex assessment is a crucial part of the biological profile in forensic and archaeological context, but it can be hardly performed in cases of commingled and charred human remains where DNA tests often are not applicable. With time literature have analyzed the sexual dimorphism of teeth (and especially canines), but very few articles take into consideration the teeth volume, although with time several technologies have been introduced in order to assess 3D volume (CT-scan, laser scanner, etc.). This study aims at assessing the sexual dimorphism of dental and pulp chamber volumes of a sample of canines. Cone beam computed tomography analyses were performed by 87 patients (41 males and 46 females, aged between 15 and 83 years) for clinical purposes, and were acquired in order to measure canine volumes. Results show that the dental volume amounted to 0.745 cm(3) (SD 0.126 cm(3)) in males, 0.551 cm(3) (SD 0.130 cm(3)) with a statistically significant difference (p<0.01). A diagnostic threshold of 0.619 cm(3) was stated, which provides a percentage of correct answer of 80.5% in the chosen sample. The novel method was then applied with success to 7 archaeological: where in all the cases the results were concordant with those provided by the assessment of the cranium and pelvis. The study adds a contribution to the wide analysis of dental sexual dimorphism confirming the statistically significant differences of volume between males and females and providing a method for the diagnosis of sex applicable to forensic cases.

Analysis of professional malpractice claims in implant dentistry in Italy from insurance company technical reports, 2006 to 2010.

PURPOSE: The aim of the study was to analyze the characteristics of implant dentistry claims in Italy based on insurance company technical reports for malpractice claims. MATERIALS AND METHODS: One hundred twenty-one technical reports of cases of professional malpractice in implant dentistry between 2006 and 2010 were included in the study. Data included the sex and age of the patient and dentist, the kind of negligence claimed, and the damages awarded as a consequence of the alleged misconduct. RESULTS: Of the cases examined in this study, 9.9% went to court. The patients were female in 73.6% of the cases. Most of the technical errors were committed during implant insertion (82.6%). In 50.4% of cases, the technical error involved the surrounding structures, such as damage to the inferior alveolar nerve (32.2%) or the lingual nerve (2.5%), invasion of the maxillary sinus (9.1%), or pulpal dental necrosis in adjacent teeth (6.6%). Incomplete clinical documentation was apparent in 54.5% of cases. In 9.9% of cases, a civil suit had already been filed before a visit, and medicolegal advice from the insurance expert had been procured. CONCLUSION: The discrepancy between the total number of cases examined and those that went to court indicates that implant malpractice claims in Italy are most often settled out of court. The large number of intraoperative errors seen and the high proportion of injuries to surrounding structures suggest that implant dentists would benefit from further specific training. Also, clinical documentation vital to a defense against any claims relating to professional misconduct was incomplete or absent in more than half of the cases.

Immediate denture fabrication: a clinical report.

The aim of the present clinical report was to describe the use of a patient's extensive fixed prosthesis, where the supporting teeth were hopeless, for fabricating an interim immediate complete denture. The present procedure was used to replicate the vertical dimension, phonetic and aesthetic of the existing fixed prostheses as part of an immediate denture and a final complete denture.