Nanoscale investigations on interchain organization in thin films of polymer-liquid crystal blend.

Optimized nanomorphology in organic thin active layers is crucial for good performance in organic solar cells. However, the relation between morphology and electronic properties at nanoscale remains not completely understood. Here, we study the effect of film thickness and temperature annealing on the ordering of poly(3-hexylthiophene) chains when the polymer is blended with a columnar liquid crystalline molecule. Electronic absorption, atomic force microscopy measurements, and Raman spectroscopy show that morphology and chain ordering of the blend depend on the film thickness. We highlight the benefit of using a liquid crystal in organic blends, opening the way to use simple processing methods for the fabrication of organic electronic devices.

Development of a lab-on-chip electrochemical biosensor for water quality analysis based on microalgal photosynthesis.

The present work was dedicated to the development of a lab-on-chip device for water toxicity analysis and more particularly herbicide detection in water. It consists in a portable system for on-site detection composed of three-electrode electrochemical microcells, integrated on a fluidic platform constructed on a glass substrate. The final goal is to yield a system that gives the possibility of conducting double, complementary detection: electrochemical and optical and therefore all materials used for the fabrication of the lab-on-chip platform were selected in order to obtain a device compatible with optical technology. The basic detection principle consisted in electrochemically monitoring disturbances in metabolic photosynthetic activities of algae induced by the presence of Diuron herbicide. Algal response, evaluated through oxygen (O2) monitoring through photosynthesis was different for each herbicide concentration in the examined sample. A concentration-dependent inhibition effect of the herbicide on photosynthesis was demonstrated. Herbicide detection was achieved through a range (blank - 1 µM Diuron herbicide solution) covering the limit of maximum acceptable concentration imposed by Canadian government (0.64 µM), using a halogen white light source for the stimulation of algal photosynthetic apparatus. Superior sensitivity results (limit of detection of around 0.1 µM) were obtained with an organic light emitting diode (OLED), having an emission spectrum adapted to algal absorption spectrum and assembled on the final system.