RESUMO
The rational design of noble metal-free electrocatalysts holds great promise for cost-effective green hydrogen generation through water electrolysis. In this context, here, the development of a superhydrophilic bifunctional electrocatalyst that facilitates both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline conditions is demonstrated. This is achieved through the in situ growth of hierarchical NiMoO4 @CoMoO4 ·xH2 O nanostructure on nickel foam (NF) via a two-step hydrothermal synthesis method. NiMoO4 @CoMoO4 ·xH2 O/NF facilitates OER and HER at the overpotentials of 180 and 220 mV, respectively, at the current density of 10 mA cm-2 . The NiMoO4 @CoMoO4 ·xH2 O/NF Ç NiMoO4 @CoMoO4 ·xH2 O/NF cell can be operated at a potential of 1.60 V compared to 1.63 V displayed by the system based on the Pt/C@NFÇRuO2 @NF standard electrode pair configuration at 10 mA cm-2 for overall water splitting. The density functional theory calculations for the OER process elucidate that the lowest ΔG of NiMoO4 @CoMoO4 compared to both Ni and NiMoO4 is due to the presence of Co in the OER catalytic site and its synergistic interaction with NiMoO4 . The preparative strategy and mechanistic understanding make the windows open for the large-scale production of the robust and less expensive electrode material for the overall water electrolysis.
RESUMO
Even though the anion exchange membrane fuel cells have many advantages, the stability of their electrocatalysts for oxygen reduction reaction (ORR) has remained remarkably poor. We report here on the ultrathin twisty PdNi-alloy nanowires (NWs) exhibiting a very low reaction overpotential with an E1/2 â¼ 0.95 V versus RHE in alkaline media maintained over 200 K cycles, the highest ever recorded for an electrocatalyst. The mass activity of the used NWs is >10 times higher than fresh commercial Pt/C. Therein, Ni improves the Pd d-band center for a more efficient ORR, and its leaching continuously regenerates the surface active sites. The twisty nanowire morphology imparts multiple anchor points on the electrode surface to arrest their detachment or coalescence and extra stability from self-entanglement. The significance of the NW morphology was further confirmed from the high-temperature durability studies. The study demonstrates that tailoring the number of contact points to the electrode-surface may help realize commercial-grade stability in the highly active electrocatalysts.
RESUMO
The well-known limitation of alkaline fuel cells is the slack kinetics of the cathodic half-cell reaction, the oxygen reduction reaction (ORR). Platinum, being the most active ORR catalyst, is still facing challenges due to its corrosive nature and sluggish kinetics. Many novel approaches for substituting Pt have been reported, which suffer from stability issues even after mighty modifications. Designing an extremely stable, but unexplored ordered intermetallic structure, Pd2Ge, and tuning the electronic environment of the active sites by site-selective Pt substitution to overcome the hurdle of alkaline ORR is the main motive of this paper. The substitution of platinum atoms at a specific Pd position leads to Pt0.2Pd1.8Ge demonstrating a half-wave potential (E1/2) of 0.95 V vs RHE, which outperforms the state-of-the-art catalyst 20% Pt/C. The mass activity (MA) of Pt0.2Pd1.8Ge is 320 mA/mgPt, which is almost 3.2 times better than that of Pt/C. E1/2 and MA remained unaltered even after 50,000 accelerated degradation test (ADT) cycles, which makes it a promising stable catalyst with its activity better than that of the state-of-the-art Pt/C. The undesired 2e- transfer ORR forming hydrogen peroxide (H2O2) is diminished in Pt0.2Pd1.8Ge as visible from the rotating ring-disk electrode (RRDE) experiment, spectroscopically visualized by in situ Fourier transform infrared (FTIR) spectroscopy and supported by computational studies. The effect of Pt substitution on Pd has been properly manifested by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS). The swinging of the oxidation state of atomic sites of Pt0.2Pd1.8Ge during the reaction is probed by in situ XAS, which efficiently enhances 4e- transfer, producing an extremely low percentage of H2O2.
Assuntos
Peróxido de Hidrogênio , Platina , Catálise , Elétrons , Oxigênio/química , Platina/químicaRESUMO
The role of B site doping with transition metals in brownmillerites, a perovskite related family of compounds, in bifunctional oxygen electrocatalysis, viz., simultaneous reduction and evolution reactions, is analysed. Ca2Fe1.9M0.1O5 (M = Mn, Co, Ni, and Cu) is synthesised and structurally characterised by powder XRD and Rietveld refinement. Valence states of the surface B site ions are identified by X-ray photoelectron spectroscopy. Bifunctional oxygen electrochemistry is studied with the RDE and RRDE techniques and correlated with the structural and electronic parameters like oxygen non-stoichiometry and B site catalytic activity. Since the widely accepted electronic descriptors like eg filling may not be sufficient for explaining the bifunctional activity, B site electron donating capability as well as the extent of oxygen vacancies enhancing O2 adsorption is also considered. Such structural parameters are also found to influence both the ORR and OER and based on this, Ni doping is proposed as advantageous for the bifunctional activity.
RESUMO
This article describes the setting up of a facility on the energy-scanning EXAFS beamline (BL-09) at RRCAT, Indore, India, for operando studies of structure-activity correlation during a catalytic reaction. The setup was tested by operando X-ray absorption spectroscopy (XAS) studies performed on a Co-based catalyst during the Fischer-Tropsch reaction to obtain information regarding structural changes in the catalyst during the reaction. Simultaneous gas chromatography (GC) measurements during the reaction facilitate monitoring of the product gases, which in turn gives information regarding the activity of the catalyst. The combination of XAS and GC techniques was used to correlate the structural changes with the activity of the catalyst at different reaction temperatures. The oxide catalyst was reduced to the metallic phase by heating at 400°C for 5â h under H2 at ambient pressure and subsequently the catalytic reaction was studied at four different temperatures of 240, 260, 280 and 320°C. The catalyst was studied for 10â h at 320°C and an attempt has been made to understand the process of its deactivation from the XANES and EXAFS results.
RESUMO
Earth abundant, first row transition metals offer a cheap and sustainable alternative to the rare and precious metals. However, utilization of first row metals in catalysis requires harsh reaction conditions, suffers from limited activity, and fails to tolerate functional groups. Reported here is a highly efficient iron catalyzed hydroformylation of alkenes under mild conditions. This protocol operates at 10-30 bar syngas pressure below 100 °C, utilizes readily available ligands, and applies to an array of olefins. Thus, the iron precursor [HFe(CO)4]-[Ph3PNPPh3]+ (1) in the presence of triphenyl phosphine catalyzes the hydroformylation of 1-hexene (S2), 1-octene (S1), 1-decene (S3), 1-dodecene (S4), 1-octadecene (S5), trimethoxy(vinyl)silane (S6), trimethyl(vinyl)silane (S7), cardanol (S8), 2,3-dihydrofuran (S9), allyl malonic acid (S10), styrene (S11), 4-methylstyrene (S12), 4- iBu-styrene (S13), 4- tBu-styrene (S14), 4-methoxy styrene (S15), 4-acetoxy styrene (S16), 4-bromo styrene (S17), 4-chloro styrene (S18), 4-vinylbenzonitrile (S19), 4-vinylbenzoic acid (S20), and allyl benzene (S21) to corresponding aldehydes in good to excellent yields. Both electron donating and electron withdrawing substituents could be tolerated and excellent conversions were obtained for S11-S20. Remarkably, the addition of 1 mol % acetic acid promotes the reaction to completion within 16-24 h. Detailed mechanistic investigations revealed in situ formation of an iron-dihydride complex [H2Fe(CO)2(PPh3)2] (A) as an active catalytic species. This finding was further supported by cyclic voltammetry investigations and intermediacy of an Fe(0)-Fe(II) species was established. Combined experimental and computational investigations support the existence of an iron-dihydride as the catalyst resting state, which then follows a Fe(II) based catalytic cycle to produce aldehyde.
RESUMO
Solid state proton (1H) magic angle spinning (MAS) NMR has been employed to study the distribution of confined water in ethane substituted periodic mesoporous organosilicate (PMOE) materials. Proton spectra acquired at different hydration levels are analysed and interpreted in terms of water clusters of various sizes and distributions of water layers on the pore surface. For comparison, we also performed similar experiments on SBA-15. The formation of larger clusters at lower hydration suggests that the pores of PMOE are getting filled with water at lower hydration levels than those in SBA-15. For PMOE, the simultaneous presence of two major resonances in the ranges 3.6-4.1 ppm and 4.4-5.2 ppm and their behaviour upon hydration imply a water layer distribution that is the sum of two contributions, corresponding to fully filled and partially filled pores or pore segments. Furthermore, the behaviour mentioned above suggests that both radial and axial filling mechanisms play a significant role in the hydration process. For SBA-15, as a function of hydration, we observed a smooth variation in the proton chemical shift of the main dynamic resonance. In accordance with previous studies, this is attributed to the gradual increase in the average thickness of water layers with an increase in hydration, and to a pore filling mechanism that is predominantly radial.
RESUMO
Electrocatalysts containing a Ni/NiO/N-doped graphene interface have been synthesised using the ligand-assisted chemical vapor deposition technique. NiO nanoparticles were used as the substrate to grow N-doped graphene by decomposing vapours of benzene and N-containing ligands. The method was demonstrated with two nitrogen-containing ligands, namely dipyrazino[2,3-f:2',3'-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile (L) and melamine (M). The structure and composition of the as-synthesized composites were characterized by XRD, Raman spectroscopy, SEM, TEM and XPS. The composite prepared using the ligand L had NiO sandwiched between Ni and N-doped graphene and showed an overpotential of 292 mV at 10 mA cm-2 and a Tafel slope of 45.41 mV dec-1 for the OER, which is comparable to the existing noble metal catalysts. The composite prepared using the ligand M had Ni encapsulated by N-doped graphene without NiO. It showed an overpotential of 390 mV at 10 mA cm-2 and a Tafel slope of 78.9 mV dec-1. The ligand-assisted CVD route demonstrates a facile route to control the microstructure of the electrocatalysts.
RESUMO
Electrochemical CO2 reduction reaction (eCO2 RR) is performed on two intermetallic compounds formed by copper and gallium metals (CuGa2 and Cu9 Ga4 ). Among them, CuGa2 selectively converts CO2 to methanol with remarkable Faradaic efficiency of 77.26% at an extremely low potential of -0.3 V vs RHE. The high performance of CuGa2 compared to Cu9 Ga4 is driven by its unique 2D structure, which retains surface and subsurface oxide species (Ga2 O3 ) even in the reduction atmosphere. The Ga2 O3 species is mapped by X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure (XAFS) techniques and electrochemical measurements. The eCO2 RR selectivity to methanol are decreased at higher potential due to the lattice expansion caused by the reduction of the Ga2 O3 , which is probed by in situ XAFS, quasi in situ powder X-ray diffraction, and ex situ XPS measurements. The mechanism of the formation of methanol is visualized by in situ infrared (IR) spectroscopy and the source of the carbon of methanol at the molecular level is confirmed from the isotope-labeling experiments in presence of 13 CO2 . Finally, to minimize the mass transport limitations and improve the overall eCO2 RR performance, a poly(tetrafluoroethylene)-based gas diffusion electrode is used in the flow cell configuration.
RESUMO
Cobalt and iron metal-based oxide catalysts play a significant role in energy devices. To unravel some interesting parameters, we have synthesized metal oxides of cobalt and iron (i.e. Fe2O3, Co3O4, Co2FeO4 and CoFe2O4), and measured the effect of the valence band structure, morphology, size and defects in the nanoparticles towards the electrocatalytic hydrogen evolution reaction (HER), the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). The compositional variations in the cobalt and iron precursors significantly alter the particle size from 60 to <10 nm and simultaneously the shape of the particles (cubic and spherical). The Tauc plot obtained from the solution phase ultraviolet (UV) spectra of the nanoparticles showed band gaps of 2.2, 2.3, 2.5 and 2.8 eV for Fe2O3, Co3O4, Co2FeO4 and CoFe2O4, respectively. Further, the valence band structure and work function analysis using ultraviolet photoelectron spectroscopy (UPS) and core level X-ray photoelectron spectroscopy (XPS) analyses provided better structural insight into metal oxide catalysts. In the Co3O4 system, the valence band structure favors the HER and Fe2O3 favors the OER. The composites Co2FeO4 and CoFe2O4 show a significant change in their core level (O 1s, Co 2p and Fe 2p spectra) and valence band structure. Co3O4 shows an overpotential of 370 mV against 416 mV for Fe2O3 at a current density of 2 mA cm-2 for the HER. Similarly, Fe2O3 shows an overpotential of 410 mV against the 435 mV for Co3O4 at a current density of 10 mA cm-2 for the OER. However, for the ORR, Co3O4 shows 70 mV improvement in the half-wave potential against Fe2O3. The composites (Co2FeO4 and CoFe2O4) display better performance compared to their respective parent oxide systems (i.e., Co3O4 and Fe2O3, respectively) in terms of the ORR half-wave potential, which can be attributed to the presence of the oxygen vacancies over the surface in these systems. This was further corroborated in density functional theory (DFT) simulations, wherein the oxygen vacancy formation on the surface of CoFe2O4(001) was calculated to be significantly lower (â¼50 kJ mol-1) compared to Co3O4 (001). The band diagram of the nanoparticles constructed from the various spectroscopic measurements with work function and band gap provides in-depth understanding of the electrocatalytic process.
RESUMO
The discovery of novel materials for industrial-standard hydrogen production is the present need considering the global energy infrastructure. A novel electrocatalyst, Pt3 Ge, which is engineered with a desired crystallographic facet (202), accelerates hydrogen production by water electrolysis, and records industrially desired operational stability compared to the commercial catalyst platinum is introduced. Pt3 Ge-(202) exhibits low overpotential of 21.7 mV (24.6 mV for Pt/C) and 92 mV for 10 and 200 mA cm-2 current density, respectively in 0.5 m H2 SO4 . It also exhibits remarkable stability of 15 000 accelerated degradation tests cycles (5000 for Pt/C) and exceptional durability of 500 h (@10 mA cm-2 ) in acidic media. Pt3 Ge-(202) also displays low overpotential of 96 mV for 10 mA cm-2 current density in the alkaline medium, rationalizing its hydrogen production ability over a wide pH range required commercial operations. Long-term durability (>75 h in alkaline media) with the industrial level current density (>500 mA cm-2 ) has been demonstrated by utilizing the electrochemical flow reactor. The driving force behind this stupendous performance of Pt3 Ge-(202) has been envisaged by mapping the reaction mechanism, active sites, and charge-transfer kinetics via controlled electrochemical experiments, ex situ X-ray photoelectron spectroscopy, in situ infrared spectroscopy, and in situ X-ray absorption spectroscopy further corroborated by first principles calculations.
RESUMO
Correction for 'Conductive interface promoted bifunctional oxygen reduction/evolution activity in an ultra-low precious metal based hybrid catalyst' by Shreya Sarkar et al., Chem. Commun., 2021, 57, 1951-1954, DOI: 10.1039/D0CC08225B.
RESUMO
Ultra low PtPd alloy deposited on Ni12P5 nanostructures (PtPd/Ni12P5) exhibited enhanced ORR activity (onset: 1.003 V and E1/2:0.95 V) on par with commercial Pt/C and superior OER activity with 81% reduction of the precious metal compared to the commercial catalyst.
RESUMO
A facile microwave-assisted strategy was employed to synthesize Ni3 Bi2 S2 nanocrystals. Variation in the synthesis conditions tuned the composition of monoclinic and orthorhombic phases of Ni3 Bi2 S2 . The electrochemical hydrogen evolution activity of the catalyst with highest percentage of monoclinic phase demonstrated a negligible onset potential of only 24â mV close to that of state-of-the-art Pt/C with an overpotential as low as 88â mV. Density functional theory calculations predicted the monoclinic phase exhibit the lowest adsorption free energy corresponding to hydrogen adsorption ( Δ G ads H * ) and, therefore, the highest hydrogen evolution activity amongst the considered phases. The quasi-2D structure of monoclinic phase facilitated an increased charge-transfer between Ni and Bi, favoring the downward shift of the d-band center to enhance the catalytic activity.
RESUMO
The surface chemistry of crotonaldehyde and propene, primary and secondary reaction products in the aerobic selective oxidation of crotyl alcohol, has been studied by temperature-programmed reaction over Au/Pd(111) surface alloys. Gold strongly promotes desorption versus reaction at mole fractions > or = 0.3 (crotonaldehyde) and > or = 0.8 (C(3)H(6)); only approximately 5% of the chemisorbed aldehyde or alkene react over Au-rich alloys. Surprisingly, co-adsorbed oxygen strongly suppresses crotonaldehyde decomposition over both clean Pd(111) and alloy surfaces, while C(3)H(6) combustion, an important undesired side-reaction over unpromoted Pd(111), is also moderated by Au.
RESUMO
Selective oxidation of amines to imines using sunlight as clean and renewable energy source is an important but challenging chemical transformation because of high reactivity of the generated imines and lack of visible light-responsive materials with high conversion rates. In addition, oxygen gas has to be purged in the reaction mixture in order to increase the reaction efficiency which, in itself, is an energy-consuming process. Herein, we report, for the first time, the use of Ag3PO4 as an excellent photocatalyst for the oxidative coupling of benzyl amines induced by ambient air in the absence of any external source of molecular oxygen at room temperature. The conversion efficiency for the selective oxidation of benzyl amine was found to be greater than 95% with a selectivity of >99% after 40 min of light irradiation indicating an exceptionally high conversion efficiency with a rate constant of 0.002 min-1, a turnover frequency of 57 h-1, and a quantum yield of 19%, considering all of the absorbed photons. Ag3PO4, however, is known for its poor photostability owing to a positive conduction band position and a favorable reduction potential to metallic silver. Therefore, we further employed a simple catalyst regeneration strategy and showed that the catalyst can be recycled with negligible loss of activity and selectivity.
RESUMO
Covalent organic frameworks are a new class of crystalline organic polymers possessing a high surface area and ordered pores. Judicious selection of building blocks leads to strategic heteroatom inclusion into the COF structure. Owing to their high surface area, exceptional stability and molecular tunability, COFs are adopted for various potential applications. The heteroatoms lining in the pores of COF favor synergistic host-guest interaction to enhance a targeted property. In this report, we have synthesized a resorcinol-phenylenediamine-based COF which selectively adsorbs CO2 into its micropores (12â Å). The heat of adsorption value (32â kJ mol-1 ) obtained from the virial model at zero-loading of CO2 indicates its favorable interaction with the framework. Furthermore, we have anchored small-sized Ag nanoparticles (≈4-5â nm) on the COF and used the composite for chemical fixation of CO2 to alkylidene cyclic carbonates by reacting with propargyl alcohols under ambient conditions. Ag@COF catalyzes the reaction selectively with an excellent yield of 90 %. Recyclability of the catalyst has been demonstrated up to five consecutive cycles. The post-catalysis characterizations reveal the integrity of the catalyst even after five reaction cycles. This study emphasizes the ability of COF for simultaneous adsorption and chemical fixation of CO2 into corresponding cyclic carbonates.
RESUMO
A mild and efficient nickel-catalyzed method for the coupling of unactivated primary and secondary alkyl chlorides with the C-H bond of indoles and pyrroles is described which demonstrates a high level of chemo and regioselectivity. The reaction tolerates numerous functionalities, such as halide, alkenyl, alkynyl, ether, thioether, furanyl, pyrrolyl, indolyl and carbazolyl groups including acyclic and cyclic alkyls under the reaction conditions. Mechanistic investigation highlights that the alkylation proceeds through a single-electron transfer (SET) process with Ni(i)-species being the active catalyst. Overall, the alkylation follows a Ni(i)/Ni(iii) pathway involving the rate-influencing two-step single-electron oxidative addition of alkyl chlorides.
RESUMO
A modified deposition precipitation (DP) method has been developed to address a fundamental issue of supporting well dispersed Au nanoparticles on silica. Ammonium chloride (NH4Cl) plays an important role in in situ modifying the gold precursor (HAuCl4·3H2O) solution allowing facile deposition of gold NPs in the channels of SBA-15. The Au-SBA-15 catalyst (2.8 wt%) synthesized by this procedure showed 100% conversion for CO oxidation at room temperature with excellent stability at room temperature and high temperature.
RESUMO
Correction for 'One pot ligand exchange method for a highly stable Au-SBA-15 catalyst and its room temperature CO oxidation' by Yogita Soni et al., Chem. Commun., 2018, DOI: 10.1039/c8cc06887a.