Deuterium Isotope Effect in Single Molecule Photophysics and Photochemistry of Hypericin.

The peripherical protons of the dye molecule hypericin can undergo structural interconversion (tautomerization) between different isomers separated by a low energy barrier with rates that depends sensitively on the interaction with local chemical environment defined by the nature of host material. We investigate the deuterium (D) isotope effect of hypericin tautomerism at the single-molecule level to avoid ensemble averaging in different polymer matrices by a combined spectroscopic and computational approach. In the 'innocent' PMMA matrix only intramolecular isotope effects on the internal conversion channel and tautomerization are observed; while PVA specifically interacts with the probe via H- and D-bonding. This establishes a single molecular picture on intra- and intermolecular nano-environment effects to control chromophore photophysics and -chemistry.

Rapid Detection of Cleanliness on Direct Bonded Copper Substrate by Using UV Hyperspectral Imaging.

In the manufacturing process of electrical devices, ensuring the cleanliness of technical surfaces, such as direct bonded copper substrates, is crucial. An in-line monitoring system for quality checking must provide sufficiently resolved lateral data in a short time. UV hyperspectral imaging is a promising in-line method for rapid, contactless, and large-scale detection of contamination; thus, UV hyperspectral imaging (225-400 nm) was utilized to characterize the cleanliness of direct bonded copper in a non-destructive way. In total, 11 levels of cleanliness were prepared, and a total of 44 samples were measured to develop multivariate models for characterizing and predicting the cleanliness levels. The setup included a pushbroom imager, a deuterium lamp, and a conveyor belt for laterally resolved measurements of copper surfaces. A principal component analysis (PCA) model effectively differentiated among the sample types based on the first two principal components with approximately 100.0% explained variance. A partial least squares regression (PLS-R) model to determine the optimal sonication time showed reliable performance, with R2cv = 0.928 and RMSECV = 0.849. This model was able to predict the cleanliness of each pixel in a testing sample set, exemplifying a step in the manufacturing process of direct bonded copper substrates. Combined with multivariate data modeling, the in-line UV prototype system demonstrates a significant potential for further advancement towards its application in real-world, large-scale processes.

Accumulation and penetration behavior of hypericin in glioma tumor spheroids studied by fluorescence microscopy and confocal fluorescence lifetime imaging microscopy.

Glioblastoma WHO IV belongs to a group of brain tumors that are still incurable. A promising treatment approach applies photodynamic therapy (PDT) with hypericin as a photosensitizer. To generate a comprehensive understanding of the photosensitizer-tumor interactions, the first part of our study is focused on investigating the distribution and penetration behavior of hypericin in glioma cell spheroids by fluorescence microscopy. In the second part, fluorescence lifetime imaging microscopy (FLIM) was used to correlate fluorescence lifetime (FLT) changes of hypericin to environmental effects inside the spheroids. In this context, 3D tumor spheroids are an excellent model system since they consider 3D cell-cell interactions and the extracellular matrix is similar to tumors in vivo. Our analytical approach considers hypericin as probe molecule for FLIM and as photosensitizer for PDT at the same time, making it possible to directly draw conclusions of the state and location of the drug in a biological system. The knowledge of both state and location of hypericin makes a fundamental understanding of the impact of hypericin PDT in brain tumors possible. Following different incubation conditions, the hypericin distribution in peripheral and central cryosections of the spheroids were analyzed. Both fluorescence microscopy and FLIM revealed a hypericin gradient towards the spheroid core for short incubation periods or small concentrations. On the other hand, a homogeneous hypericin distribution is observed for long incubation times and high concentrations. Especially, the observed FLT change is crucial for the PDT efficiency, since the triplet yield, and hence the O2 activation, is directly proportional to the FLT. Based on the FLT increase inside spheroids, an incubation time > 30 min is required to achieve most suitable conditions for an effective PDT.

Monitoring tautomerization of single hypericin molecules in a tunable optical λ/2 microcavity.

Hypericin tautomerization that involves the migration of the labile protons is believed to be the primary photophysical process relevant to its light-activated antiviral activity. Despite the difficulty in isolating individual tautomers, it can be directly observed in single-molecule experiments. We show that the tautomerization of single hypericin molecules in free space is observed as an abrupt flipping of the image pattern accompanied with fluorescence intensity fluctuations, which are not correlated with lifetime changes. Moreover, the study can be extended to a λ/2 Fabry-Pérot microcavity. The modification of the local photonic environment by a microcavity is well simulated with a theoretical model that shows good agreement with the experimental data. Inside a microcavity, the excited state lifetime and fluorescence intensity of single hypericin molecules are correlated, and a distinct jump of the lifetime and fluorescence intensity reveals the temporal behavior of the tautomerization with high sensitivity and high temporal resolution. The observed changes are also consistent with time-dependent density functional theory calculations. Our approach paves the way to monitor and even control reactions for a wider range of molecules at the single molecule level.

Prediction of Honeydew Contaminations on Cotton Samples by In-Line UV Hyperspectral Imaging.

UV hyperspectral imaging (225 nm-410 nm) was used to identify and quantify the honeydew content of real cotton samples. Honeydew contamination causes losses of millions of dollars annually. This study presents the implementation and application of UV hyperspectral imaging as a non-destructive, high-resolution, and fast imaging modality. For this novel approach, a reference sample set, which consists of sugar and protein solutions that were adapted to honeydew, was set-up. In total, 21 samples with different amounts of added sugars/proteins were measured to calculate multivariate models at each pixel of a hyperspectral image to predict and classify the amount of sugar and honeydew. The principal component analysis models (PCA) enabled a general differentiation between different concentrations of sugar and honeydew. A partial least squares regression (PLS-R) model was built based on the cotton samples soaked in different sugar and protein concentrations. The result showed a reliable performance with R2cv = 0.80 and low RMSECV = 0.01 g for the validation. The PLS-R reference model was able to predict the honeydew content laterally resolved in grams on real cotton samples for each pixel with light, strong, and very strong honeydew contaminations. Therefore, inline UV hyperspectral imaging combined with chemometric models can be an effective tool in the future for the quality control of industrial processing of cotton fibers.

Gradient SERS Substrates with Multiple Resonances for Analyte Screening: Fabrication and SERS Applications.

Surface-enhanced Raman spectroscopy (SERS) provides a strong enhancement to an inherently weak Raman signal, which strongly depends on the material, design, and fabrication of the substrate. Here, we present a facile method of fabricating a non-uniform SERS substrate based on an annealed thin gold (Au) film that offers multiple resonances and gap sizes within the same sample. It is not only chemically stable, but also shows reproducible trends in terms of geometry and plasmonic response. Scanning electron microscopy (SEM) reveals particle-like and island-like morphology with different gap sizes at different lateral positions of the substrate. Extinction spectra show that the plasmonic resonance of the nanoparticles/metal islands can be continuously tuned across the substrate. We observed that for the analytes 1,2-bis(4-pyridyl) ethylene (BPE) and methylene blue (MB), the maximum SERS enhancement is achieved at different lateral positions, and the shape of the extinction spectra allows for the correlation of SERS enhancement with surface morphology. Such non-uniform SERS substrates with multiple nanoparticle sizes, shapes, and interparticle distances can be used for fast screening of analytes due to the lateral variation of the resonances within the same sample.

Scouting for strong light-matter coupling signatures in Raman spectra.

Strong coupling between vibrational transitions and a vacuum field of a cavity mode leads to the formation of vibrational polaritons. These hybrid light-matter states have been widely explored because of their potential to control chemical reactivity. However, the possibility of altering Raman scattering through the formation of vibrational polaritons has been rarely reported. Here, we present the Raman scattering properties of different molecules under vibrational strong coupling conditions. The polariton states are clearly observed in the IR transmission spectra of the coupled system for benzonitrile and methyl salicylate in liquid phase and for polyvinyl acetate in a solid polymer film. However, none of the studied systems exhibits a signature of the polariton states in the Raman spectra. For the solid polymer film, we have used cavities with different layer structures to investigate the influence of vibrational strong coupling on the Raman spectra. The only scenario where alterations of the Raman spectra are observed is for a thin Ag layer being in direct contact with the polymer film. This shows that, even though the system is in the vibrational strong coupling regime, changes in the Raman spectra do not necessarily result from the strong coupling, but are caused by the surface enhancement effects.

Tunable strong coupling of two adjacent optical λ/2 Fabry-Pérot microresonators.

Strong optical mode coupling between two adjacent λ/2 Fabry-Pérot microresonators consisting of three parallel silver mirrors is investigated experimentally and theoretically as a function of their detuning and coupling strength. Mode coupling can be precisely controlled by tuning the mirror spacing of one resonator with respect to the other by piezoelectric actuators. Mode splitting, anti-crossing and asymmetric modal damping are observed and theoretically discussed for the symmetric and antisymmetric supermodes of the coupled system. The spectral profile of the supermodes is obtained from the Fourier transform of the numerically calculated time evolution of the individual resonator modes, taking into account their resonance frequencies, damping and coupling constants, and is in excellent agreement with the experiments. Our microresonator design has potential applications for energy transfer between spatially separated quantum systems in micro optoelectronics and for the emerging field of polaritonic chemistry.

Nanoscale plasmonic phase sensor.

Using the localized surface plasmon resonance (LSPR) of gold nanoparticles for sensing applications has attracted considerable interest, since it can be very sensitive, even down to a single molecule, and selective for a specific analyte molecule with a suitable surface modification. LSPR sensing is usually based on the wavelength shift of the LSPR or a Fano resonance. Here, we present a new experimental approach based on the phase of the light scattered by a single gold nanoparticle by equipping a confocal microscope with an additional interferometer arm similar to a Michelson interferometer. The detected phase depends on the shape of the nanoparticle and the refractive index of the surrounding medium and can even be detected for off-resonant excitation. This can be used as a new and sensitive detection method in LSPR sensing, allowing the detection of changes to the local refractive index or the binding of molecules to the nanoparticle surface.

Hypericin: Single Molecule Spectroscopy of an Active Natural Drug.

Hypericin is one of the most efficient photosensitizers used in photodynamic tumor therapy (PDT). The reported treatments of this drug reach from antidepressive, antineoplastic, antitumor and antiviral activity. We show that hypericin can be optically detected down to a single molecule at ambient conditions. Hypericin can even be observed inside of a cancer cell, which implies that this drug can be directly used for advanced microscopy techniques (PALM, spt-PALM, or FLIM). Its photostability is large enough to obtain single molecule fluorescence, surface enhanced Raman spectra (SERS), fluorescence lifetime, antibunching, and blinking dynamics. Sudden spectral changes can be associated with a reorientation of the molecule on the particle surface. These properties of hypericin are very sensitive to the local environment. Comparison of DFT calculations with SERS spectra show that both the neutral and deprotonated form of hypericin can be observed on the single molecule and ensemble level.

Simultaneous positive and negative optical patterning with dye-sensitized CdSe quantum dots.

CdSe quantum dots are functionalized with the organic dye iron ß-tetraaminophthalocyanine to reward a solution-processable hybrid material with two individually addressable optical resonances. We exploit this dual functionality during optical write/optical read patterning experiments and show that it is possible to simultaneously write complex optical patterns with positive and negative fluorescence contrast. This is enabled by a fluorescence enhancement under near-resonant excitation of the quantum dots in combination with a fluorescence bleaching during excitation of the singlet transition of the phthalocyanine. The presence of the organic dye not only enables negative optical patterning but also enhances the contrast during positive patterning. Furthermore, the patterning result is strongly dependent on the excitation wavelength during readout. Our results highlight the new possibilities that arise from combining inorganic quantum dots and organic π-systems into hybrid nanocomposites.

Second-harmonic generation in single CdSe nanowires by focused cylindrical vector beams.

Cylindrical vector beams with radial or azimuthal polarization have created great interest due to their unique focusing characteristics and focal components. In this Letter, we investigate second-harmonic general (SHG) of single CdSe nanowires (NWs) excited by tightly focused cylindrical vector beams of 150 fs pulses at 800 nm. With the specific polarizations in the focal region, we demonstrate a three-dimensional interaction between the focal electric field components and the NWs. The excitation anisotropy of the SHG can directly be derived from the imaging patterns with the cylindrical vector beams. The highest SHG excitation efficiency is observed when the polarization is parallel to the long axis of the NW, which is confirmed by the conventional linear polarization approach. Our work with cylindrical vector beams provides a new approach to study the nonlinear phenomenon of single semiconductor NWs in three dimensions and it could be applied to many other nanoscale systems.

Single gold nanorods as optical probes for spectral imaging.

In this paper, we explain in detail the wavelength dependence of the elastic scattering pattern of individual, optically isolated gold nanorods by using confocal microscopy in combination with higher order laser modes, i.e., radially/azimuthally polarized laser modes. We demonstrate that the spectral dependence of the scattering pattern is mostly caused by the relative strength of the gold nanorods' plasmonic modes at different wavelengths. Since the gold nanorods' plasmonic modes are determined by the particles' geometrical parameter, e.g., size and aspect ratio, as well as the refractive index of the surrounding medium, we show that the spectral dependence of the scattering pattern is a simple, not invasive way to determine, e.g., the gold nanorod aspect ratio or physical variation of the local environment. Thus, a further development of spectral imaging of gold nanorods can lead to the employment of this technique in biomedical assays involving also living samples.

Enhanced single-molecule spectroscopy in highly confined optical fields: from λ/2-Fabry-Pérot resonators to plasmonic nano-antennas.

While single-molecule fluorescence from emitters with high quantum efficiencies such as organic dye molecules can easily be detected by modern apparatus, many less efficient emission processes such as Raman scattering and metal luminescence require dramatic enhancement to exceed the single-particle detection limit. This enhancement can be achieved using resonant optical systems such as plasmonic particles or nanoantennas, the study of which has led to substantial progress in understanding the interaction of quantum emitters with their electromagnetic environment. This review is focused on the advances in measurement techniques and potential applications enabled by a deeper understanding of fundamental optical interaction processes occurring between single quantum systems on the nanoscale. While the affected phenomena are numerous, including molecular fluorescence and also exciton luminescence and Raman scattering, the interaction itself can often be described from a unified point of view. Starting from a single underlying model, this work elucidates the dramatic enhancement potential of plasmonic tips and nanoparticles and also the more deterministic influence of a Fabry-Pérot microresonator. With the extensive knowledge of the radiative behavior of a quantum system, insight can be gained into nonradiative factors as well, such as energy transfer phenomena or spatial and chemical configurations in single molecules.

Synthesis and SHG properties of two new cyanurates: Sr3(O3C3N3)2 (SCY) and Eu3(O3C3N3)2 (ECY).

The new cyanurates Sr3(O3C3N3)2 (SCY) and Eu3(O3C3N3)2 (ECY) were prepared via exothermic solid state metathesis reactions from MCl2 (M = Sr, Eu) and K(OCN) in silica tubes at 525 °C. Both structures were characterized by means of powder and single crystal X-ray diffraction, and their structures are shown to crystallize with the noncentrosymmetric space group R3c (No. 161). Infrared spectra and nonlinear optical properties (NLO) of SCY and ECY are reported in comparison to those of CCY and ß-BaB2O4 (ß-BBO).

Synthesis, structure, and frequency-doubling effect of calcium cyanurate.

Calcium cyanurate is synthesized by reacting calcium chloride with potassium cyanate following a solid-state reaction. The formation of the new compound Ca3(O3C3N3)2 (CCY), which occurs by the cyclotrimerization of cyanate ions, was examined thermoanalytically and the crystal structure was determined by single-crystal structure analysis. The structure of CCY is closely related to the structure of the well-known oxoborate ß-BaB2O4 (BBO). Second harmonic generation (SHG) measurements on crystal powders show a higher SHG efficiency for CCY than for BBO by about one order of magnitude.

Sensing dielectric media on the nanoscale with freely oriented gold nanorods.

In this work we demonstrate that freely oriented individual gold nanorods (GNRs) can be used for sensing variations of the refractive index at the interface between two dielectric media. Both the elastic scattering and the luminescence signal of individual GNRs have been used to characterize the dielectric medium surrounding the particles. The scattering signal depends strongly on the distance from the focusing interface and the refractive index mismatch at the focusing interface, while the luminescence signal is only influenced by the last parameter. We used radially and azimuthally polarized light as an excitation source to directly determine the orientation of individual gold nanorods embedded within a dielectric medium.

Analysis of Fast Fluorescence Kinetics of a Single Cyanobacterium Trapped in an Optical Microcavity.

Photosynthesis is one the most important biological processes on earth, producing life-giving oxygen, and is the basis for a large variety of plant products. Measurable properties of photosynthesis provide information about its biophysical state, and in turn, the physiological conditions of a photoautotrophic organism. For instance, the chlorophyll fluorescence intensity of an intact photosystem is not constant as in the case of a single fluorescent dye in solution but shows temporal changes related to the quantum yield of the photosystem. Commercial photosystem analyzers already use the fluorescence kinetics characteristics of photosystems to infer the viability of organisms under investigation. Here, we provide a novel approach based on an optical Fabry-Pérot microcavity that enables the readout of photosynthetic properties and activity for an individual cyanobacterium. This approach offers a completely new dimension of information, which would normally be lost due to averaging in ensemble measurements obtained from a large population of bacteria.

Polarization-dependent SERS at differently oriented single gold nanorods.

We investigated the influence of the orientation of individual gold nanorods on the polarization-dependent single-particle surface-enhanced Raman spectroscopy (SERS) of adenine. Higher-order laser beams (radial and azimuthal polarizations) have been used in combination with a parabolic mirror-assisted confocal optical microscope. Based on the photoluminescence (PL) patterns of the single gold nanorods and the simulated electric-field distribution in the focus, we distinguished between isolated gold rods and clusters as well as single nanorods with different orientations. We found that for single gold nanorods lying flat on the substrate, the longitudinal particle plasmon resonance (PPR) mode can be excited more efficiently with the in-plane field component in the focus of an azimuthally polarized laser beam, which enables the observation of stronger enhanced adenine Raman spectra from the single gold nanorods compared to the case of a radially polarized beam.

Strong coupling between an optical microcavity and photosystems in single living cyanobacteria.

The first step in photosynthesis is an extremely efficient energy transfer mechanism that led to the debate to which extent quantum coherence may be involved in the energy transfer between the photosynthetic pigments. In search of such a coherent behavior, we have embedded living cyanobacteria between the parallel mirrors of an optical microresonator irradiated with low intensity white light. As a consequence, we observe vacuum Rabi splitting in the transmission and fluorescence spectra as a result of strong light matter coupling of the chlorophyll a molecules in the photosystems (PSs) and the cavity modes. The Rabi-splitting scales with the number of the PSs chlorophyll a pigments involved in strong coupling indicating a delocalized polaritonic state. Our data provide evidence that a delocalized polaritonic state can be established between the chlorophyll a molecule of the PSs in living cyanobacterial cells at ambient conditions in a microcavity.