Evaporation of nanoscale water on a uniformly complete wetting surface at different temperatures.

The evaporation of nanoscale water films on surfaces affects many processes in nature and industry. Using molecular dynamics (MD) simulations, we show the evaporation of a nanoscale water film on a uniformly complete wetting surface at different temperatures. With the increase in temperature, the growth of the water evaporation rate becomes slow. Analyses show that the hydrogen bond (H-bond) lifetimes and orientational autocorrelation times of the outermost water film decrease slowly with the increase in temperature. Compared to a thicker water film, the H-bond lifetimes and orientational autocorrelation times of a monolayer water film are much slower. This suggests that the lower evaporation rate of the monolayer water film on a uniformly complete wetting surface may be caused by the constriction of the water rotation due to the substrate. This finding may be helpful for controlling nanoscale water evaporation within a certain range of temperatures.

Accelerated evaporation of water on graphene oxide.

Using molecular dynamics simulations, we show that the evaporation of nanoscale volumes of water on patterned graphene oxide is faster than that on homogeneous graphene oxide. The evaporation rate of water is insensitive to variation in the oxidation degree of the oxidized regions, so long as the water film is only distributed on the oxidized regions. The evaporation rate drops when the water film spreads onto the unoxidized regions. Further analysis showed that varying the oxidation degree observably changed the interaction between the outmost water molecules and the solid surface, but the total interaction for the outmost water molecules only changed a very limited amount due to the correspondingly regulated water-water interaction when the water film is only distributed on the oxidized regions. When the oxidation degree is too low and some unoxidized regions are also covered by the water film, the thickness of the water film decreases, which extends the lifetime of the hydrogen bonds for the outmost water molecules and lowers the evaporation rate of the water. The insensitivity of water evaporation to the oxidation degree indicates that we only need to control the scale of the unoxidized and oxidized regions for graphene oxide to regulate the evaporation of nanoscale volumes of water.

Colored spectrum characteristics of thermal noise on the molecular scale.

Thermal noise is of fundamental importance to many processes. Traditionally, thermal noise has been treated as white noise on the macroscopic scale. Using molecular dynamics simulations and power spectrum analysis, we show that the thermal noise of solute molecules in water is non-white on the molecular scale, which is in contrast to the conventional theory. In the frequency domain from 2 × 1011 Hz to 1013 Hz, the power spectrum of thermal noise for polar solute molecules resembles the spectrum of 1/f noise. The power spectrum of thermal noise for non-polar solute molecules deviates only slightly from the spectrum of white noise. The key to this phenomenon is the existence of hydrogen bonds between polar solute molecules and solvent water molecules. Furthermore, for polar solute molecules, the degree of power spectrum deviation from that of white noise is associated with the average lifetime of the hydrogen bonds between the solute and the solvent molecules.

Enhancement of Water Evaporation on Solid Surfaces with Nanoscale Hydrophobic-Hydrophilic Patterns.

Using molecular dynamics simulations, we show that the evaporation of nanoscale water on hydrophobic-hydrophilic patterned surfaces is unexpectedly faster than that on any surfaces with uniform wettability. The key to this phenomenon is that, on the patterned surface, the evaporation rate from the hydrophilic region only slightly decreases due to the correspondingly increased water thickness; meanwhile, a considerable number of water molecules evaporate from the hydrophobic region despite the lack of water film. Most of the evaporated water from the hydrophobic region originates from the hydrophilic region by diffusing across the contact lines. Further analysis shows that the evaporation rate from the hydrophobic region is approximately proportional to the total length of the contact lines.

Intrinsic autocorrelation time of picoseconds for thermal noise in water.

Whether thermal noise is colored or white is of fundamental importance. In conventional theory, thermal noise is usually treated as white noise so that there are no directional transportations in the asymmetrical systems without external inputs, since only the colored fluctuations with appropriate autocorrelation time length can lead to directional transportations in the asymmetrical systems. Here, on the basis of molecular dynamics simulations, we show that the autocorrelation time length of thermal noise in water is ~10 ps at room temperature, which indicates that thermal noise is not white in the molecular scale while thermal noise can be reasonably assumed as white in macro- and meso-scale systems. The autocorrelation time length of thermal noise is intrinsic, since the value is almost unchanged for different temperature coupling methods. Interestingly, the autocorrelation time of thermal noise is correlated with the lifetime of hydrogen bonds, suggesting that the finite autocorrelation time length of thermal noise mainly comes from the finite lifetime of the interactions between neighboring water molecules.

Water-mediated signal multiplication with Y-shaped carbon nanotubes.

Molecular scale signal conversion and multiplication is of particular importance in many physical and biological applications, such as molecular switches, nano-gates, biosensors, and various neural systems. Unfortunately, little is currently known regarding the signal processing at the molecular level, partly due to the significant noises arising from the thermal fluctuations and interferences between branch signals. Here, we use molecular dynamics simulations to show that a signal at the single-electron level can be converted and multiplied into 2 or more signals by water chains confined in a narrow Y-shaped nanochannel. This remarkable transduction capability of molecular signal by Y-shaped nanochannel is found to be attributable to the surprisingly strong dipole-induced ordering of such water chains, such that the concerted water orientations in the 2 branches of the Y-shaped nanotubes can be modulated by the water orientation in the main channel. The response to the switching of the charge signal is very rapid, from a few nanoseconds to a few hundred nanoseconds. Furthermore, simulations with various water models, including TIP3P, TIP4P, and SPC/E, show that the transduction capability of the Y-shaped carbon nanotubes is very robust at room temperature, with the interference between branch signals negligible.

Kinetics of water filling the hydrophobic channels of narrow carbon nanotubes studied by molecular dynamics simulations.

The kinetics of water filling narrow single-walled carbon nanotubes was studied using molecular dynamics simulations. The time required to fully fill a nanotube was linear with respect to the tube length. We observed that water molecules could enter into nanotubes of different lengths, either from one end or from both ends. The probability of having a nanotube filled completely from both ends increased exponentially with the tube length. For short tubes, filling usually proceeded from only one end. For long tubes, filling generally proceeded from both tube ends over three stages, i.e., filling from one end, filling from both ends, and filling from both ends with the dipole reorientation of water molecules to give a concerted ordering within the fully filled tube. The water molecules in the partially filled nanotube were hydrogen bonded similarly to those in the fully filled nanotube. Simulations for the reference Lennard-Jones fluid without hydrogen bonds were also performed and showed that the filling behavior of water molecules can be attributed to strong intermolecular hydrogen bonding.

Unexpected large impact of small charges on surface frictions with similar wetting properties.

Generally, the interface friction on solid surfaces is regarded as consistent with wetting behaviors, characterized by the contact angles. Here using molecular dynamics simulations, we find that even a small charge difference (≤0.36 e) causes a change in the friction coefficient of over an order of magnitude on two-dimensional material and lipid surfaces, despite similar contact angles. This large difference is confirmed by experimentally measuring interfacial friction of graphite and MoS2 contacting on water, using atomic force microscopy. The large variation in the friction coefficient is attributed to the different fluctuations of localized potential energy under inhomogeneous charge distribution. Our results help to understand the dynamics of two-dimensional materials and biomolecules, generally formed by atoms with small charge, including nanomaterials, such as nitrogen-doped graphene, hydrogen-terminated graphene, or MoS2, and molecular transport through cell membranes.

Concerted orientation induced unidirectional water transport through nanochannels.

The dynamics of water inside nanochannels is of great importance for biological activities as well as for the design of molecular sensors, devices, and machines, particularly for sea water desalination. When confined in specially sized nanochannels, water molecules form a single-file structure with concerted dipole orientations, which collectively flip between the directions along and against the nanotube axis. In this paper, by using molecular dynamics simulations, we observed a net flux along the dipole-orientation without any application of an external electric field or external pressure difference during the time period of the particular concerted dipole orientations of the molecules along or against the nanotube axis. We found that this unique special-directional water transportation resulted from the asymmetric potential of water-water interaction along the nanochannel, which originated from the concerted dipole orientation of the water molecules that breaks the symmetry of water orientation distribution along the channel within a finite time period. This finding suggests a new mechanism for achieving high-flux water transportation, which may be useful for nanotechnology and biological applications.

3D flexible water channel: stretchability of nanoscale water bridge.

Artificial water channels can contribute to a better understanding of natural water channels and offer a highly selective, advanced conductance system. Most studies use nanotubes, however it is difficult to fabricate a flexible structure, and the nanosized diameter brings nanoconfinement effects, and nanotube toxicity arouses biosafety concerns. In this paper, we use an electric field to restrain the water molecules to form a nanoscale water bridge as an artificial water channel to connect a separated solid plate by molecular dynamics simulations. We observe strong 3D flexible stretchability in the water bridge, maintaining a variable length and an arbitrary angle for a considerably long time. The stretching of the water bridge enables it to be polarized at an arbitrary angle and the stretchability is linearly dependent upon the polarization strength. More interestingly, we show the possibility of establishing complex water networks, e.g., triangle, rectangle, hexagon, and tetrahedron-tetrahedron water networks. Our results may help realize structurally flexible and environmentally friendly water channels for lab-on-a-chip applications in nanofluidics.

Lattice Boltzmann model with nearly constant density.

An improved lattice Boltzmann model is developed to simulate fluid flow with nearly constant fluid density. The ingredient is to incorporate an extra relaxation for fluid density, which is realized by introducing a feedback equation in the equilibrium distribution functions. The pressure is dominated by the moving particles at a node, while the fluid density is kept nearly constant and explicit mass conservation is retained as well. Numerical simulation based on the present model for the (steady) plane Poiseuille flow and the (unsteady) two-dimensional Womersley flow shows a great improvement in simulation results over the previous models. In particular, the density fluctuation has been reduced effectively while achieving a relatively large pressure gradient.

Evaporation of tiny water aggregation on solid surfaces with different wetting properties.

The evaporation of a tiny amount of water on the solid surface with different wettabilities has been studied by molecular dynamics simulations. From nonequilibrium MD simulations, we found that, as the surface changed from hydrophobic to hydrophilic, the evaporation speed did not show a monotonic decrease as intuitively expected, but increased first, and then decreased after it reached a maximum value. The analysis of the simulation trajectory and calculation of the surface water interaction illustrate that the competition between the number of water molecules on the water-gas surface from where the water molecules can evaporate and the potential barrier to prevent those water molecules from evaporating results in the unexpected behavior of the evaporation. This finding is helpful in understanding the evaporation on biological surfaces, designing artificial surfaces of ultrafast water evaporating, or preserving water in soil.

Stable liquid water droplet on a water monolayer formed at room temperature on ionic model substrates.

Using molecular dynamics simulation, we show direct evidence of the unexpected phenomenon of "water that does not wet a water monolayer" at room temperature. This phenomenon is attributed to the structure of the water beneath the water droplet, which exhibits an ordered water monolayer. Remarkably, there remains a considerable number of dangling OH bonds in this room temperature water monolayer, in contrast with the absence of dangling OH bonds at cryogenic temperature.

Water permeation across nanochannels with defects.

Defects are common in fabricated nanochannels. In this paper, water permeation across a single-walled carbon nanotube with defects was studied using molecular dynamics simulations. It is found that the impact on water permeation is negligible when the density of the defects is small, while a significant reduction in water permeation is observed when the density of the defects is high. These findings should be helpful in both understanding water permeation across nanochannels and designing efficient artificial nanochannel.

Enhancement of water permeation across a nanochannel by the structure outside the channel.

We used molecular dynamics simulation to study the effect of the external structure on water permeation across a single-walled nanochannel. In contrast with the macroscopic scenario, the outside structure greatly affects the water transport across the nanochannel. Remarkably, the ratio of maximal to minimal flux reached a value of about two for different outside structures. These findings are expected to be helpful in design of high-flux nanochannels and provide an insight into the contribution of the lipid membrane to water permeation across biological water channels.

A charge-driven molecular water pump.

Understanding and controlling the transport of water across nanochannels is of great importance for designing novel molecular devices, machines and sensors and has wide applications, including the desalination of seawater. Nanopumps driven by electric or magnetic fields can transport ions and magnetic quanta, but water is charge-neutral and has no magnetic moment. On the basis of molecular dynamics simulations, we propose a design for a molecular water pump. The design uses a combination of charges positioned adjacent to a nanopore and is inspired by the structure of channels in the cellular membrane that conduct water in and out of the cell (aquaporins). The remarkable pumping ability is attributed to the charge dipole-induced ordering of water confined in the nanochannels, where water can be easily driven by external fields in a concerted fashion. These findings may provide possibilities for developing water transport devices that function without osmotic pressure or a hydrostatic pressure gradient.

Controllable water channel gating of nanometer dimensions.

The dynamics of water molecules in a single-walled carbon nanotube (SWNT) under continuous deformations was studied with molecular dynamics simulations. The flux and occupancy remain almost fixed within a deformation of 2.0 A but decrease sharply for a further deformation of 0.6 A. The nanopore is an excellent on-off gate that is both effectively resistant to deformation noises and sensitive to available signals. Biological water channels are expected to share this advantage due to similar wavelike water distributions. The minimal external force required for triggering an open-close transition falls within the working range of many available experimental facilities, which provides the possibility of developing SWNT-based nanoscale devices.