RESUMO
BACKGROUND: Metabolic syndrome (MetS), a worldwide public health problem, affects human health and quality of life in a dramatic manner. A growing evidence base suggests that MetS is strongly associated with levels of systemic immune inflammation. The present study aimed to investigate the possible relationship between the systemic immune-inflammation index (SII), a novel inflammatory marker, and MetS to provide data support for effective MetS prevention by reducing the systemic inflammatory response. METHODS: We included adult participants with complete SII and MetS information from the 2011-2016 National Health and Nutrition Examination Survey (NHANES). MetS was defined as using the criteria developed by the Adult Treatment Program III of the National Cholesterol Education Program. The formula for SII was as follows: SII = platelet counts × neutrophil counts/ lymphocyte counts. Weighted linear regression was used to assess differences in variables across SII quartile groups after the SII score was divided into 4 quartiles. The independent interaction between SII and MetS was investigated using weighted multivariate logistic regression analysis and subgroup analysis, and the relationship between SII levels and 5 particular MetS items was further explored in depth. RESULTS: A total of 12,402 participants, 3,489 of whom were diagnosed with MetS, were included in this study. After correcting for covariates, the results of a logistic regression of multistage weighted complex sampling data revealed that participants with higher SII scores had a higher chance of developing MetS (odds ratio (OR) = 1.33, 95% confidence interval (CI): 1.14-1.55) and that SII levels could be used as an independent risk factor to predict that likelihood of MetS onset. In the Q1-Q4 SII quartile group, the risk of developing MetS was 1.33 times higher in the Q4 group, which had the highest level of systemic immune inflammation than in the Q1 group. After adjusting for all confounding factors, SII scores were found to have a negative correlation with high-density lipoprotein cholesterol (OR = 1.29; 95% CI, 0.99-1.67, P = 0.056) and a significant positive correlation with waist circumference (OR = 2.17; 95% CI, 1.65-2.87, P < 0.001) and blood pressure (BP) (OR = 1.65; 95% CI, 1.20-2.27, P = 0.003). Gender, age, and smoking status were shown to alter the positive association between SII and MetS in subgroup analyses and interaction tests (p for interaction < 0.05). Additionally, we demonstrated a nonlinear correlation between SII and MetS. The findings of the restricted cubic spline indicated that there was an inverted U-shaped association between SII and MetS. CONCLUSIONS: Our findings imply that increased SII levels are related to MetS, and SII may be a simple and cost-effective method to identify individuals with MetS. Therefore, protective measures such as early investigation and anti-inflammatory interventions are necessary to reduce the overall incidence of MetS.
Assuntos
Síndrome Metabólica , Adulto , Humanos , Síndrome Metabólica/complicações , Síndrome Metabólica/epidemiologia , Inquéritos Nutricionais , Qualidade de Vida , Inflamação/complicações , ColesterolRESUMO
Even though the global wound care market size was valued at USD 19.83 billion in 2020, it is still a challenge to develop a hydrogel-based wound dressing with a good mechanical property, adhesiveness and antibacterial property. This study established and validated a mussel-inspired adhesive hydrogel wound dressing with antibacterial activity by dispersing tetracycline hydrochloride into hydrogel based polydopamine, gelatin and polyacrylamide. A tough hydrogel with a fracture stress of 0.42 MPa was prepared by changing the contents of the gelatin and polyacrylamide. With the addition of polydopamine and tetracycline hydrochloride, the hydrogel was endowed with an adhesive property (with a tissue adhesive strength of 4.13 kPa) and antibacterial activity against both Escherichia coli and Staphylococcus aureus. Finally, a rat full-thickness skin defect wound model was used to evaluate the performance of the hydrogels in wound repair. The hydrogel group showed a significantly reduced wound area (95.72%) compared with the blank group (86.34%) on day 14. The hydrogel promoted the collagen deposition, weakened the inflammatory response and enhanced wound healing. Therefore, the hydrogel with multifunctional properties is a promising candidate for complete skin regeneration.
Assuntos
Gelatina , Tetraciclina , Resinas Acrílicas , Adesivos , Animais , Antibacterianos/farmacologia , Bandagens , Hidrogéis , Ratos , CicatrizaçãoRESUMO
Hantzsch reaction is one of the typical multicomponent reactions (MCRs), and it is employed herein to endow cellulosic materials with fluorescent properties. For example, acetoacetyl (ACAC)-bearing cotton fabric prepared via transesterification with tert-butyl acetoacetate is subjected to an aqueous Hantzsch reaction with formaldehyde and ammonium acetate at ambient temperature. A strong fluorescent emission around 460 nm is achieved within 10 min. XPS, fluorescent spectroscopy, and elemental analysis are used to confirm the presence of 1,4-dihydropyridine (DHP) rings on the surface of the fabric. TGA, SEM, XRD, and mechanical testing results show that the modification process has minimum impact on intrinsic properties of the fabric. The strategy is also shown to be generally applicable to various forms of cellulosic materials and different aldehydes. This fast and simple approach enriches the application of MCR in modification of cellulose and cellulose derivatives.
Assuntos
Aldeídos , Celulose , Corantes , ÁguaRESUMO
Herein, a PVA (polyvinyl alcohol)-based multi-responsive hydrogel was prepared by introducing the dynamic and reversible supramolecular complexation between polyvinyl alcohol acetoacetate (PVAA) and Fe3+ ions within 20 s at room temperature. PVAA-Fe hydrogels could be achieved by the simple mixing process of a PVAA aqueous solution with FeCl3 aqueous solution. The soluble PVAA was synthesized by the reaction of PVA with tert-butyl acetoacetate (t-BAA) via transesterification in dimethyl sulfoxide (DMSO). The chemical structure of PVAA was systematically characterized by FT-IR and 1H NMR spectroscopy. The resulting hydrogel showed excellent self-healing behavior without other external stimuli. It was also demonstrated that the PVAA-Fe hydrogel exhibited multi-responsive properties, such as responsiveness to pH, redox, light irradiation and temperature. In addition, the presence of Fe3+ ions and Cl- ions in the gel imparted the PVAA-Fe hydrogel with favorable conductivity. Therefore, the strategy for the facile preparation of the hydrogel in this work could provide a benign and versatile method for achieving multi-functional soft materials for various applications such as smart devices, logic gates, and sensors.
RESUMO
Recycling and high-value reutilization of waste cotton fabrics (WCFs) has attracted a widespread concern. One potential solution is to extract nanocellulose. Sulfuric acid hydrolysis is a conventional method for the production of nanocellulose with high negative charge from WCFs. However, the recycling and disposal of chemicals in nanocellulose production, along with low yields, remain significant challenges. Consequently, there is a pressing need for a sustainable method to produce nanocellulose at higher yield without the use of chemicals. Herein, we propose a green, sustainable and chemical-free method to extract nanocellulose from WCFs. The nanocellulose displayed a rod-like shape with a length of 50-300 nm, a large aspect ratio of 18.4 ± 2 and the highest yield of up to 89.9 %. The combined short-time and efficient two-step process, involving electron beam irradiation (EBI) and high-pressure homogenization (HPH), offers a simple and efficient alternative approach with a low environmental impact, to extract nanocellulose. EBI induced a noticeable degradation in WCFs and HPH exfoliated cellulose to nano-size with high uniformity via mechanical forces. The as-prepared nanocellulose exhibits excellent emulsifying ability as the Pickering emulsion emulsifier. This work provides a facile and efficient approach for nanocellulose fabrication as well as a sustainable way for recycle and reutilization of the waste cotton fabrics.
Assuntos
Celulose , Fibra de Algodão , Celulose/química , Elétrons , Química Verde/métodos , HidróliseRESUMO
Flexible electrothermal composite phase change materials (PCMs) are promising candidates for portable thermotherapy. However, a great challenge remains to achieve high PCM loading while maintaining reasonable flexibility. Herein, the polypyrrole-decorated melamine foam (PPy@MF) was fabricated and thereafter applied to confine binary PCM mixtures composed of a high-enthalpy long-chain polyethylene glycol (PEG4000) and its short-chain homologue (PEG200) to make the novel PPy@MF-PEG4000+200 composite PCM. At a high loading of up to 74.1% PEG4000 and a high latent heat energy storage density of 150.1 J/g, the composite PCM remained flexible at temperature (-20 °C) far below its phase transition point thanks to the plasticine effect of PEG200. The composite also demonstrated good Joule heating performance, providing fast heating from 28 to 70 °C at low applied voltages (4.5-6.0 V). The energy could be stored efficiently and released to maintain the composites at the proper temperature. The electrothermal performance of the composite remained undisturbed during curved or repeated bending, showing good potential to be used for personal thermal management and thermotherapy.
RESUMO
Due to the wide range of available raw materials and excellent biocompatibility, all-cellulose composites (ACCs) have received significant attention as a kind of renewable and biodegradable candidate to replace petroleum-based synthetic polymers. However, most current research of ACCs is limited to film and bulk materials. Herein, we present a simple, efficient, and scalable welding method for obtaining green, self-reinforced, high performance all-cellulose composite yarns by partially dissolving and regenerating cellulose yarns with phosphoric acid. The in-situ core-shell structure of the welded yarn results in improved strength (134.6 MPa), friction resistance (8000 cycles), moisture regain (11.89 %), and dyeing properties. Moreover, the regeneration and drying procedure can be optimized to further enhance the strength (190.5 MPa) of the welded yarn. This straightforward welding approach provides a promising and convenient route for manufacturing high-performance bio-based yarn.
RESUMO
Recycling of waste cotton fabrics (WCFs) is a desirable solution to address the problems brought up by fast fashion, but it remains challenging due to inherent limitations in preparing stable and spinnable dopes by dissolving high molecular weight cellulose efficiently and cost effectively. Herein, we show that despite the prevailing concerns of cellulose degradation via glycosidic hydrolysis when dissolved in acids, fast and non-destructive direct dissolution of WCFs in aqueous phosphoric acid (a.q. PA) could be realized using a cyclic freeze-thawing procedure, which combined with subsequent adjustment of degree of polymerization (DP) and degassing yielded stable and spinnable dopes. Regenerated cellulose fibers (RCFs) with favorable tensile strength (414.2 ± 14.3 MPa) and flexibility (15.4 ± 1.5 %) could be obtained by carefully adjusting the coagulation conditions to induce oriented and compact packing of the cellulose chains. The method was shown to be conveniently extended to dissolve reactively dyed WCFs, showing great potential as a cheap and green alternative to heavily explored ionic liquids (ILs) and N-methylmorpholine-N-oxide (NMMO)-based systems for textile-to-textile recycling of WCFs.
Assuntos
Celulose , Fibra de Algodão , Ácidos Fosfóricos , Reciclagem , Resistência à Tração , Celulose/química , Ácidos Fosfóricos/química , Têxteis , Congelamento , HidróliseRESUMO
Lignin, as a natural polyphenol, displays anti-oxidant activity by trapping and binding free radicals through its free phenolic hydroxyl groups. However, the most accessible form, industrial lignins, generally has low phenolic hydroxyl content, which severely limits their application value and scenarios. Herein, we showed that potassium-glycerate deep eutectic solvent (PG-DES) treatment can be combined with laccase oxidation to afford prepared high antioxidant lignin nanoparticles (HA-LNPs) with notably improved anti-oxidant activities benefiting from both the enhanced phenolic hydroxyl content 170.8 % and reduced average particle size (59.0 nm). At concentrations as low as 60 µg/mL, HA-LNPs showed favorable effects in promoting collagen formation. When HA-LNPs were used as an active ingredient in the anti-aging mask formulation, the reactive oxygen species (ROS) scavenging activity of mask samples containing 0.4 % HA-LNPs reached 37.2 %. The data suggest great promise of HA-LNPs as a natural antioxidant for formulating in anti-aging skin care products.
Assuntos
Antioxidantes , Cosméticos , Lignina , Nanopartículas , Antioxidantes/química , Antioxidantes/farmacologia , Cosméticos/química , Nanopartículas/química , Lignina/química , Lignina/farmacologia , Espécies Reativas de Oxigênio/metabolismo , Lacase/química , Lacase/metabolismo , Oxirredução/efeitos dos fármacos , Tamanho da PartículaRESUMO
The abuse of non-renewable fossil resources and the resulting plastic pollution have posed a great burden on the environment. Fortunately, renewable bio-macromolecules have shown great potential to replace synthetic plastics in fields ranging from biomedical applications, and energy storage to flexible electronics. However, the potential of recalcitrant polysaccharides, such as chitin, in the above-mentioned fields have not been fully exploited because of its poor processability, which is ultimately due to the lack of suitable, economical, and environmentally friendly solvent for it. Herein, we demonstrate an efficient and stable strategy for the fabrication of high-strength chitin films from concentrated chitin solutions in cryogenic 85 wt% aqueous phosphoric acid (aq. H3PO4). The regeneration conditions, including the nature of the coagulation bath and its temperature are important variables affecting the reassembly of chitin molecules and hence the structure and micromorphology of the films. Uniaxial orientation of the chitin molecules by applying tension to the RCh hydrogels further endows the films with enhanced mechanical properties of up to 235 MPa and 6.7 GPa in tensile strength and Young's modulus, respectively.
RESUMO
Silk fibroin (SF) has received interest in tissue engineering owing to its biocompatibility, biodegradability, and favorable mechanical properties. However, the complex preparation, brittleness, and lack of pores in the structure of the silk fibroin film limit its application. Herein, we show that facile dissolution of SF in aqueous phosphoric acid followed by regeneration in aqueous ammonium sulfate ((NH4)2SO4) could afford highly stretchable films with nano-pores formed in the nonsolvent-induced phase separation process. The named phase separation, which determines the morphology and mechanical properties of the regeneration silk fibroin (RSF) films, is highly dependent on the (NH4)2SO4 concentration as well as the initial concentration of the SF solution. Therefore, the RSF films exhibit a tunable pore size ranging from 230 to 510 nm and excellent stretchability with tensile strain up to 143 ± 16%. Most interestingly, the RSF films were shown to support the proliferation of human skin fibroblasts in vitro as well as speed up full-thickness skin wound healing in a rat model. This work establishes an easy and feasible method to access porous RSF membranes that can be used for wound dressing in clinical settings.
Assuntos
Fibroínas , Ratos , Humanos , Animais , Fibroínas/química , Porosidade , Cicatrização , Regeneração , Engenharia TecidualRESUMO
The fabric-based wound dressings are hard to maintain a moist environment for wound healing while the hemostatic property and gas permeability of some hydrogel-based wound dressings are not ideal. This study first put forward a strategy of checkerboard-pattern wound dressing: 1) preparing the base fabric with hemostatic property, 2) printing multifunctional hydrogels onto one side of the base fabric to form checkerboard patterns, 3) modifying the other side of the base fabric to be hydrophobic. In this manner, the composite dressing not only maintained the advantages of hydrogels, but also inherited good mechanical property, hemostatic property, and gas permeability from the base fabric. Here, the cotton fabric was carboxymethylated to be MCF. To obtain multifunctional hydrogel, sodium carboxymethylcellulose was oxidated to introduce aldehyde groups to form Schiff base with amino groups in gelatin, besides, dopamine and Ag nanoparticles were introduced to endow the hydrogel with antioxidant property and antibacterial activity. The multifunctional hydrogel was printed onto one side of MCF, subsequently, the deposition of paraffin made the other side of this dressing become hydrophobic. The good performance of the obtained dressing in hemostatic process and wound healing demonstrated its potential in the field of wound treatment.
Assuntos
Hemostáticos , Nanopartículas Metálicas , Hidrogéis/química , Gelatina/química , Carboximetilcelulose Sódica/química , Prata , Hemostasia , Antibacterianos/química , SódioRESUMO
We have demonstrated, for the first time, high-efficient non-destructive and non-derivative dissolution of cellulose could be achieved in cryogenic aqueous phosphoric acid. Cellulose from different sources and of varying degree of polymerization from 200 (MCC) to 2200 (cotton fabric) could be dissolved completely to afford solutions containing 5 wt%-18 wt% cellulose, from which ultra-strong and tough cellulose films of tensile strength as high as 707 MPa could be obtained using water as the coagulant. These solutions can be stored at -18 °C for extended time without noticeable degradation while desired degree of polymerization is also attainable by tuning the storage conditions. The findings of this work call for renewal attention on phosphoric acid as a promising cellulose solvent for being non-toxic, non-volatile, easy to handle, and cost-effective.
RESUMO
The effective integration of multiple thermal functions into one material is highly attractive in personal thermal management, taking the complex application environment into consideration. Herein, a multifunctional Janus cellulosic composite encompassing superior electrical heating, energy storage, thermal insulation, and infrared camouflage performance was firstly developed by integrating Janus cellulose nanofibers (CNF) aerogel, polypyrrole (PPy), and polyethylene glycol (PEG). In practice, the active heating-thermal regulation layer (PPy@CNFphilic-PEG) of multifunctional Janus cellulosic composite is faced inward to provide heating on-demand through the joint action of the electrically conductive PPy and thermally regulative PEG. The outward-facing hydrophobic aerogel layer (CNFphobic) serves as the thermal insulator, which simultaneously enables infrared camouflage by reducing heat loss to the environment via infrared radiation. This work presents an effective and facile strategy toward multifunctional Janus materials for efficient personal thermal management, showing great promise for potential applications, such as thermal comfort, infrared camouflage, and security protection.
Assuntos
Nanofibras , Polímeros , Celulose/química , Condutividade Elétrica , Nanofibras/química , Polímeros/química , Pirróis/químicaRESUMO
Regenerated lignocellulose nanofibrils (RLCNFs) have recently piqued the interest of researchers due to their widespread availability and ease of extraction. After dewaxing, we treated sisal fiber with alkali, followed by heating and agitation, to obtain RLCNFs, which were then vacuum oven-dried. We used a variety of characterization techniques, including XRD, SEM, and FT-IR, to assess the effects of the alkali treatment on the sisal fiber. Various characterizations demonstrate that lignocellulose fibrils have been successfully regenerated and contaminants have been removed. In addition, employing the RLCNFs as a stabilizer, stable Pickering emulsions were created. The effects of RLCNF concentration in the aqueous phase and water-to-oil volume ratio on stability were studied. The RLCNFs that have been produced show promise as a stabilizer in Pickering emulsions.
RESUMO
Common flame retardants, such as halogen-based materials, are being phased-out owing to their harmful environmental and health effects. We prepared poly-(cyclotriphosphazene-co-4,4'-sulfonyldiphenol) (PZS) microspheres, nanotubes, capsicum-like nanotubes, and branched nanotubes as flame retardants. An increase in reaction temperature changed the morphology from nanotubes to microspheres. A PZS shape had a positive effect on the flame retardancy of polyethylene terephthalate (PET). The PZS with a capsicum-like nanotube morphology had the best flame retardancy, and the PET limiting oxygen index increased from 25.2% to 34.4%. The flame retardancy capability was followed by PZS microspheres (33.1%), branched nanotubes (32.8%), and nanotubes (32.5%). The capsicum-like nanotubes promote the formation of highly dense and continuous carbon layers, and they release a non-combustible gas (CO2). This study confirms polyphosphazene-based flame retardants as viable and environmentally-friendly alternatives to common flame retardants. It also presents a novel and facile design and synthesis of morphology-controlled nanomaterials with enhanced flame retardant properties.
RESUMO
Emulsion hydrogels are structurally composite materials combining the advantages of emulsions and hydrogels with the ability to accommodate hydrophobic and hydrophilic components in one system. It is a promising strategy for the excellent encapsulation and delivery of many bioactive ingredients. In this work, the thyme oil-loaded zwitterionic emulsion hydrogels are constructed by the cellulose acetoacetate-horseradish peroxidase-hydrogen peroxide-initiated (CAA-HRP-H2O2-initiated) ternary enzyme-mediated polymerization of the thyme oil-in-water (O/W) emulsions stabilized by cellulose acetoacetate (CAA). CAA is the key component in the system, acting as the emulsifier and the polymerization mediator simultaneously. The formed zwitterionic poly(sulfobetaine methacrylate) (PSBMA) hydrogel network provides emulsion hydrogels with good hydration capacity and potential anti-fouling performance. The thyme oil-loaded zwitterionic emulsion hydrogels exhibit interconnected, uniform, and adjustable porous structures with tunable mechanical properties, antifouling performance, good biocompatibility, and excellent antibacterial activity against S. aureus and E. coli. These results all demonstrate that the ternary enzyme-mediated polymerization of zwitterionic monomers in the continuous phase of O/W emulsion templates is a facile and efficient strategy to encapsulate hydrophobic bioactive ingredients.
Assuntos
Hidrogéis , Staphylococcus aureus , Antibacterianos/farmacologia , Emulsões/química , Escherichia coli , Hidrogéis/química , Peróxido de Hidrogênio , Óleos de Plantas , Timol , Thymus (Planta)RESUMO
Cerebral small vessel disease (CSVD) and multiple sclerosis (MS) are a group of diseases associated with small vessel lesions, the former often resulting from the vascular lesion itself, while the latter originating from demyelinating which can damage the cerebral small veins. Clinically, CSVD and MS do not have specific signs and symptoms, and it is often difficult to distinguish between the two from the aspects of the pathology and imaging. Therefore, failure to correctly identify and diagnose the two diseases will delay early intervention, which in turn will affect the long-term functional activity for patients and even increase their burden of life. This review has summarized recent studies regarding their similarities and difference of the clinical manifestations, pathological features and imaging changes in CSVD and MS, which could provide a reliable basis for the diagnosis and differentiation of the two diseases in the future.
RESUMO
Aiming at recyclable catalyst carriers, porous cellulose macrospheres from wood pulp dissolved in an alkaline urea system were regenerated by simple injection regeneration. After solvent exchange, porous cellulose macrospheres (CMs) with a high specific surface area of 325.3 m2 g-1 were obtained by lyophilization, and CuS nanoparticles (CuS NPs) were coated on CMs by in situ growth in the liquid phase to achieve CuS-supported CM macrospheres (CuS@CM). The results indicated that the CuS@CM biocatalyst was successfully prepared with an average diameter of approximately 1.2 mm. In addition, CuS@CM was further used as a heterogeneous catalyst for the catalytic degradation of methylene blue (MB) and methyl orange (MO) model dyes during the oxidation of hydrogen peroxide (H2O2). In the presence of low doses of H2O2, the degradation rate of MB reached 94.8% within 10 min, showing high catalytic activity under neutral and alkaline conditions. After five cycles, 90.1% of the original catalytic activity was still retained, indicating that the prepared CuS@CM composite possessed excellent catalytic activity and reusability.
RESUMO
Solar-driven seawater desalination is a prospective approach to tackle the problem of freshwater shortage. Establishing a robust, efficient solar-thermal water evaporator with great salt-resistance through a facile and scalable fabrication technique is still a challenge. In this study, a floatable and robust monolithic integrated cellulose aerogel-based evaporator (MiCAE) with high performance is fabricated by carefully designing and integrating three functional components, namely, a hydrophilic cellulose-PVA aerogel (CPA), hydrophobic silylated cellulose aerogel (SCA), and multiwalled carbon nanotube (MCNT) coating layer (CPA@CNT), through the heterogeneous mixing and freeze-drying aerogel fabrication step in situ. Inspired by woods and mushrooms, the incorporation of SCA with mushroom-shaped CPA possessing wood-like structures in MiCAE can realize heat localization and effectively suppress irreversible heat dissipation. Meanwhile, CPA endows the evaporator with the rapid water transportation and great salt excretion capability because of its low-tortuosity porous structure. Thanks to the synergistic effect of the integrated functional structures, in the highly concentrated brine (17.5 wt %), the MiCAE can still realize the combination of high efficiency and obvious salt-resistance behavior. This work offers a facile, efficient salt-resistance solution for seawater desalination.