Heterogeneous MoS2 Nanosheets on Porous TiO2 Nanofibers toward Fast and Reversible Sodium-Ion Storage.

2D layered molybdenum disulfide (MoS2) has garnered considerable attention as an attractive electrode material in sodium-ion batteries (SIBs), but sluggish mass transfer kinetic and capacity fading make it suffer from inferior cycle capability. Herein, hierarchical MoS2 nanosheets decorated porous TiO2 nanofibers (MoS2 NSs@TiO2 NFs) with rich oxygen vacancies are engineered by microemulsion electrospinning method and subsequent hydrothermal/heat treatment. The MoS2 NSs@TiO2 NFs improves ion/electron transport kinetic and long-term cycling performance through distinctive porous structure and heterogeneous component. Consequently, the electrode exhibits excellent long-term Na storage capacity (298.4 mAh g-1 at 5 A g-1 over 1100 cycles and 235.6 mAh g-1 at 10 A g-1 over 7200 cycles). Employing Na3V2(PO4)3 as cathode, the full cell maintains a desirable capacity of 269.6 mAh g-1 over 700 cycles at 1.0 A g-1. The stepwise intercalation-conversion and insertion/extraction endows outstanding Na+ storage performance, which yields valuable insight into the advancement of fast-charging and long-cycle life SIBs anode materials.

Boosting Chemoselective Hydrogenation of Nitroaromatic via Synergy of Hydrogen Spillover and Preferential Adsorption on Magnetically Recoverable Pt@Fe2 O3.

It is highly desired but challenging to design high performance catalyst for selective hydrogenation of nitro compounds into amino compounds. Herein, a boosting chemoselective hydrogenation strategy on Pt@Fe2 O3 is proposed with gradient oxygen vacancy by synergy of hydrogen spillover and preferential adsorption. Experimental and theoretical investigations reveal that the nitro is preferentially adsorbed onto oxygen vacancy of Pt@Fe2 O3 , meanwhile, the H2 dissociated on Pt nanoparticles and then spillover to approach the nitro for selective hydrogenation (>99% conversion of 4-nitrostyrene, > 99% selectivity of 4-aminostyrene, TOF of 2351 h-1 ). Moreover, the iron oxide support endows the catalyst magnetic retrievability. This high activity, selectivity, and easy recovery strategy provide a promising avenue for selective hydrogenation catalysis of various nitroaromatic.

Effect of bovine lactoferricin on the growth performance, digestive capacity, immune responses and disease resistance in Pacific white shrimp, Penaeus vannamei.

The present study evaluated the growth performance, digestive enzyme activity, non-specific immunity, immunity and growth genes in Penaeus vannamei fed diets supplemented with Bovine lactoferricin (the basal diet without Bovine lactoferricin, the control; 1.0‰ Bovine lactoferricin，LCB1; 1.5‰ Bovine lactoferricin，LCB1.5; 2.0‰ Bovine lactoferricin, LCB2; 2.5‰ Bovine lactoferricin, LCB2.5) for 56 days. The feeding trial showed that the final weight, weight gain rate, and specific growth rate of the shrimp were improved significantly, while the feed conversion ratio was reduced significantly in the LCB1.5 group compared to the control (P < 0.05). The challenge test of Vibrio parahaemolyticus showed that the cumulative mortalities of shrimp in the LCB1.5, LCB2 and LCB2.5 groups were significantly lower than that in the control (P < 0.05). Compared with the control, Lipase and Trypsin activities in the hepatopancreas of LCB1.5 and LCB2 groups were significantly enhanced (P < 0.05). Compared with the control, alkaline phosphatase, acid phosphatase activities in the hepatopancreas and the relative expression levels of Relish, Toll, JAK, STAT, TOR, Raptor, 4E-BP, eIF4E1α, eIF4E2 genes in the hepatopancreas of LCB1.5, LCB2 and LCB2.5 groups were all significantly enhanced (P < 0.05). These results suggested that dietary Bovine lactoferricin could improve the growth performance, digestive capacity and immune responses of shrimp. When resistance against Vibrio parahaemolyticus in shrimp is considered, high dosage of Bovine lactoferricin showed a better effect than low dosage of Bovine lactoferricin. However, high dosage of Bovine lactoferricin can have a negative impact on the growth performance of shrimp. Considering collectively the above, Bovine lactoferricin could improve the growth performance, digestive enzymes activities, immune responses and disease resistance of P. vannamei.

Bovine lactoferricin on non-specific immunity of giant freshwater prawns, Macrobrachium rosenbergii.

This study aimed to investigate the effects of dietary Bovine lactoferricin (LFcinB) on the growth performance and non-specific immunity in Macrobrachium rosenbergii. Five experimental diets were 1.0‰ Bovine lactoferricin (LCB1); 1.5‰ Bovine lactoferricin (LCB1.5); 2.0‰ Bovine lactoferricin (LCB2); 2.5‰ Bovine lactoferricin (LCB2.5); the control group, basal diet without Bovine lactoferricin. A total of 600 prawns were randomly assigned to 5 groups in triplicate in 15 tanks for an 8-week feeding trial. The results showed the final weight, weight gain rate, specific growth rate and survival rate of prawns in the treatment groups were significantly improved versus the control (P < 0.05). The feed conversion ratio was reduced significantly in treatment groups compared to the control (P < 0.05). Compared with the control, alkaline phosphatase (AKP), acid phosphatase (ACP), lysozyme (LZM), catalase (CAT), superoxide dismutase (SOD) activities in the hepatopancreas of the treatment groups were significantly enhanced, and malondialdehyde (MDA) content was reduced significantly (P < 0.05). Compared with the control, the relative expression levels of AKP, ACP, LZM, CAT, SOD, Hsp70, peroxiredoxin-5, Toll, dorsal and relish genes were significantly higher among treatment groups, except for the AKP gene in the LCB1 group and the Hsp70 gene in the LCB1.5 group (P < 0.05). Compared with the control, the relative expression levels of TOR, 4E-BP, eIF4E1α and eIF4E2 genes were significantly enhanced in the LCB1.5 group (P < 0.05). When resistance against Vibrio parahaemolyticus in prawn is considered, higher doses of Bovine lactoferricin show better antibacterial ability. The present study indicated that dietary Bovine lactoferricin could significantly improve the growth performance and improve the antioxidative status of M. rosenbergii. The suitable addition level is 1.5 g/kg. LFcinB has great potential as a new feed additive without the threat of drug resistance.

Helical nanofiber yarn enabling highly stretchable engineered microtissue.

Development of microtissues that possess mechanical properties mimicking those of native stretchable tissues, such as muscle and tendon, is in high demand for tissue engineering and regenerative medicine. However, regardless of the significant advances in synthetic biomaterials, it remains challenging to fabricate living microtissue with high stretchability because application of large strains to microtissues can damage the cells by rupturing their structures. Inspired by the hierarchical helical structure of native fibrous tissues and its behavior of nonaffine deformation, we develop a highly stretchable and tough microtissue fiber made up of a hierarchical helix yarn scaffold, scaling from nanometers to millimeters, that can overcome this limitation. This microtissue can be stretched up to 15 times its initial length and has a toughness of 57 GJ m-3 More importantly, cells grown on this scaffold maintain high viability, even under severe cyclic strains (up to 600%) that can be attributed to the nonaffine deformation under large strains, mimicking native biopolymer scaffolds. Furthermore, as proof of principle, we demonstrate that the nanotopography of the helical nanofiber yarn is able to induce cytoskeletal alignment and nuclear elongation, which promote myogenic differentiation of mesenchymal stem cells by triggering nuclear translocation of transcriptional coactivator with PDZ-binding motif (TAZ). The highly stretchable microtissues we develop here will facilitate a variety of tissue engineering applications and the development of engineered living systems.

Hydrogen-Rich 2D Halide Perovskite Scintillators for Fast Neutron Radiography.

A fast neutron has strong penetration ability through dense and bulky objects, which makes it an ideal nondestructive technology for detecting voids, cracks, or other defects inside large equipment. However, the lack of effective fast neutron detection materials limits its application. Perovskites have shown excellent optical properties in many areas, but they are absent from fast neutron detection imaging because they cannot directly absorb fast neutrons and emit luminescence. Here, we demonstrate a hydrogen-rich long-chain organic amine modified two-dimensional (2D) perovskite fast neutron scintillator, Mn-(C18H37NH3)2PbBr4(Mn-STA2PbBr4). Its hydrogen density can reach 9.51 × 1028 m-3, and the photoluminescence quantum yield can reach 58.58%, so it is possible to integrate fast neutron absorption and luminescence into a single compound. More importantly, Mn-STA2PbBr4 can be made into a large-area self-supporting fast neutron scintillator plate with satisfactory spatial resolution (0.5 lp/mm (lp: line pairs)). This strategy provides a simple and promising choice for fast neutron scintillator nondestructive testing.

A Robust Carbon Nanotube and PVDF-HFP Nanofiber Composite Superwettability Membrane for High-Efficiency Emulsion Separation.

Oil or chemical purification is significant not only for industrial safety production but also because it conforms to the principle of sustainable development. In this paper, based on the synergistic concept of superwettability and nanopores sieve effect, a superoleophilic and under-oil superhydrophobic carbon nanotube/poly(vinylidene fluoride-co-hexafluoropropylene) nanofiber composite membrane is prepared via electrospinning, pressure-driven filtration, and chemical vapor modification. The as-prepared membrane with durable mechanical and chemical stabilities achieves separation efficiency higher than 99.9% and high flux up to 632.5 L m-2 h-1 bar-1 for different water-in-oil emulsions. This membrane is highly promising for the petroleum and chemical industries for both product quality improvement and green recycling manufacturing processes.

A Multi-Wall Sn/SnO2 @Carbon Hollow Nanofiber Anode Material for High-Rate and Long-Life Lithium-Ion Batteries.

Multi-wall Sn/SnO2 @carbon hollow nanofibers evolved from SnO2 nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire-in-double-wall-tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin-based electrode materials caused by volume expansion. Even after 2000 cycles, the wire-in-double-wall-tube Sn/SnO2 @carbon nanofibers exhibit a high specific capacity of 986.3 mAh g-1 (1 A g-1 ) and still maintains 508.2 mAh g-1 at high current density of 5 A g-1 . This outstanding electrochemical performance suggests the multi-wall Sn/SnO2 @ carbon hollow nanofibers are great promising for high performance energy storage systems.

Coral-like Au/TiO2 Hollow Nanofibers with Through-Holes as a High-Efficient Catalyst through Mass Transfer Enhancement.

One-dimensional (1D) hollow nanomaterials were widely used in the catalysis field. However, the inner surfaces of 1D hollow nanostructures could not be effectively utilized in liquid reaction because of diffusional limitation caused by the large ratio of length to diameter. In this work, a template-assisted coaxial electrospinning method was developed to prepare TiO2 hollow nanofibers with through-holes which were further employed as a carrier for Au nanoparticles. The Au/TiO2 hollow nanofibers with through-holes showed significant catalytic activity enhancement to the reduction of 4-nitrophenol in aqueous solution compared with solid and hollow nanofiber counterparts. The through-holes which provided unrestricted macropores for mass transfer in liquid solution were studied to be accounted for the catalytic activity enhancement. The through-hole structures can widen the application ranges and increase the efficiencies of zero-dimensional or 1D hollow nanomaterials.

MpAMT1;2 from Marchantia polymorpha is a High-Affinity, Plasma Membrane Ammonium Transporter.

Plant ammonium transporters in the AMT/MEP/Rh (ammonium transporter/methylammonium and ammonium permease/Rhesus factor) superfamily have only been previously characterized in flowering plants (angiosperms). Plant AMT1s are electrogenic, while plant AMT2s are electroneutral, and MEP and Rh transporters in other organisms are electroneutral. We analyzed the transport function of MpAMT1;2 from the basal land plant Marchantia polymorpha, a liverwort. MpAMT1;2 was shown to localize to the plasma membrane in Marchantia gametophyte thallus by stable transformation using a C-terminal citrine fusion. MpAMT1;2 expression was studied using quantitative real-time PCR and shown to be higher when plants were N deficient and lower when plants were grown on media containing ammonium, nitrate or the amino acid glutamine. Expression in Xenopus oocytes and analysis by electrophysiology revealed that MpAMT1;2 is an electrogenic ammonium transporter with a very high affinity for ammonium (7 µM at pH 5.6 and a membrane potential of -137 mV). A conserved inhibitory phosphorylation site identified in angiosperm AMT1s is also present in all AMT1s in Marchantia. Here we show that a phosphomimetic mutation T475D in MpAMT1;2 completely inhibits ammonium transport activity. The results indicate that MpAMT1;2 may be important for ammonium uptake into cells in the Marchantia thallus.

A Robust Cu(OH)2 Nanoneedles Mesh with Tunable Wettability for Nonaqueous Multiphase Liquid Separation.

The separation of organic liquid mixtures is achieved by Cu(OH)2 nanoneedle-covered copper mesh based on the difference of the liquid surface tension. The as-prepared membrane allows the penetration of organic liquid with smaller surface tension and blocks the higher. Thus, the effective separation of these two organic liquids can be achieved.

OxyR-regulated catalase CatB promotes the virulence in rice via detoxifying hydrogen peroxide in Xanthomonas oryzae pv. oryzae.

BACKGROUND: To facilitate infection, Xanthomonas oryzae pv. oryzae (Xoo), the bacterial blight pathogen of rice, needs to degrade hydrogen peroxide (H2O2) generated by the host defense response via a mechanism that is mediated by the transcriptional regulator OxyR. The catalase (CAT) gene catB has previously been shown to belong to the OxyR regulon in Xoo. However, its expression patterns and function in H2O2 detoxification and bacterial pathogenicity on rice remain to be elucidated. RESULTS: The catB gene encodes a putative catalase and is highly conserved in the sequenced strains of Xanthomonas spp. ß-galactosidase analysis and electrophoretic mobility shift assays (EMSA) showed that OxyR positively regulated the transcription of catB by directly binding to its promoter region. The quantitative real-time PCR (qRT-PCR) assays revealed that the expression levels of catB and oxyR were significantly induced by H2O2. Deletion of catB or oxyR drastically impaired bacterial viability in the presence of extracellular H2O2 and reduced CAT activity, demonstrating that CatB and OxyR contribute to H2O2 detoxification in Xoo. In addition, ΔcatB and ΔoxyR displayed shorter bacterial blight lesions and reduced bacterial growth in rice compared to the wild-type stain, indicating that CatB and OxyR play essential roles in the virulence of Xoo. CONCLUSIONS: Transcription of catB is enhanced by OxyR in response to exogenous H2O2. CatB functions as an active catalase that is required for the full virulence of Xoo in rice.

Effects of Brown Fishmeal on Growth Performance, Digestibility, and Lipid Metabolism of the Chinese Soft-Shelled Turtle (Pelodiscus sinensis).

The aim of this study was to evaluate the effect of brown fishmeal in replacement of white fishmeal in the diet of Chinese soft-shelled turtles and to find the optimal amount of brown fishmeal to add. Five experimental groups were set up and fed to animals, and they were composed by different proportions of white and brown fishmeal: G1 (30% white and 25% brown fishmeal), G2 (25% white and 30% brown fishmeal), G3 (20% white and 35% brown fishmeal), G4 (15% white and 40% brown fishmeal), G5 (10% white and 45% brown fishmeal). G1 is regarded as the control group. Turtles were randomly divided into five experimental groups with four replicates each. The experiment lasted 72 days. The results showed that the WGR, SGR, FCR, and HSI of the G3 group were not significantly different from those of the control group (P > 0.05). In addition, brown fishmeal can increase the crude protein content in the muscles of them. Among the serum biochemical indices, there was no significant difference between the G3 group and the G1 group, except for the level of TG (P > 0.05). Meanwhile, the activities of AST, ALT, and CAT in the liver of the G3 group did not differ significantly from those of the G1 group (P > 0.05). However, the activities of ACP, AKP, and T-AOC were significantly decreased in the G3 group (P < 0.05). In addition, the alteration of fishmeal did not affect the digestive enzyme activities in the stomach, liver, and intestine, and there is no significant difference (P > 0.05). Importantly, with increasing brown fishmeal addition, the expression of Fas, Pparγ, Scd, and Stat3 showed a significant increase, while the expression of Bmp4 decreased significantly (P < 0.05). In this study, the addition of 20% white fishmeal and 35% brown fishmeal to the diet of Chinese soft-shelled turtles did not adversely affect growth performance. Therefore, 20% white fishmeal and 35% brown fishmeal are the most practical feed formulations for Chinese soft-shelled turtles in this study.

Large-Area Transparent Antimony-Based Perovskite Glass for High-Resolution X-ray Imaging.

Nonlead low-dimensional halide perovskites attract considerable attention as X-ray scintillators. However, most scintillation screens exhibit pronounced light scattering, which detrimentally reduces the quality of X-ray imaging. Herein, we employed a simple and straightforward solvent-free melt-quenching method to fabricate a large-area zero-dimension (0D) antimony-based perovskite transparent medium, namely (C20H20P)2SbCl5 (C20H20P+ = ethyltriphenylphosphine). The transparency is due to the large steric hindrance of C20H20P+, which hinders the formation of crystals during the quenching process, thus forming a glass with low refractive index and uniform structure. This medium exhibits a high transmittance exceeding 80% in the range of 450-800 nm and shows a large Stokes shift of 245 nm, thereby minimizing light scattering, mitigating self-absorption, and enhancing the clarity of X-ray imaging. Moreover, it exhibits a high radioluminescence light yield of ∼12,535 photons MeV-1 and displays a high X-ray spatial resolution of 30 lp mm-1 owing to its high transparency. This study presents an alternative candidate for achieving high-quality X-ray detection and extends the applicability of transparent perovskite scintillators.

Zebra-Patterned Stretchable Helical Yarn for Triboelectric Self-Powered Multifunctional Sensing.

Smart textiles capable of both energy harvesting and multifunctional sensing are highly desirable for next-generation portable electronics. However, there are still challenges that need to be conquered, such as the innovation of an energy-harvesting model and the optimization of interface bonding between fibers and active materials. Herein, inspired by the spiral structure of natural vines, a highly stretchable triboelectric helical yarn (TEHY) was manufactured by twisting the carbon nanotube/polyurethane nanofiber (CNT/PU NF) Janus membrane. The TEHY had a zebra-stripe-like design that was composed of black interval conductive CNTs and white insulative PU NFs. Due to the different electron affinity, the zebra-patterned TEHY realized a self-frictional triboelectric effect because the numerous microscopic CNT/PU triboelectric interfaces generated an alternating current in the external conductive circuit without extra external friction layers. The helical geometry combined with the elastic PU matrix endowed TEHY with superelastic stretchability and outstanding output stability after 1000 cycles of the stretch-release test. By virtue of the robust mechanical and electrical stability, the TEHY can not only be used as a high-entropy mechanical energy harvester but also serve as a self-powered sensor to monitor the stretching or deforming stimuli and human physiological activities in real time. These merits manifested the versatile applications of TEHY in smart fabrics, wearable power supplies, and human-machine interactions.

The Construction of Three-Layered Biomimetic Arterial Graft Balances Biomechanics and Biocompatibility for Dynamic Biological Reconstruction.

The process of reconstructing an arterial graft is a complex and dynamic process that is subject to the influence of various mechanical factors, including tissue regeneration and blood pressure. The attainment of favorable remodeling outcomes is contingent upon the biocompatibility and biomechanical properties of the arterial graft. A promising strategy involves the emulation of the three-layer structure of the native artery, wherein the inner layer is composed of polycaprolactone (PCL) fibers aligned with blood flow, exhibiting excellent biocompatibility that fosters endothelial cell growth and effectively prevents platelet adhesion. The middle layer, consisting of PCL and polyurethane (PU), offers mechanical support and stability by forming a contractile smooth muscle ring and antiexpansion PU network. The outer layer, composed of PCL fibers with an irregular arrangement, promotes the growth of nerves and pericytes for long-term vascular function. Prioritizing the reconstruction of the inner and outer layers establishes a stable environment for intermediate smooth muscle growth. Our three-layer arterial graft is designed to provide the blood vessel with mechanical support and stability through nondegradable PU, while the incorporation of degradable PCL generates potential spaces for tissue ingrowth, thereby transforming our graft into a living implant.

Electrospun Nanofiber Materials for Photothermal Interfacial Evaporation.

Photothermal interfacial evaporation with low cost and environmental friendliness has attracted much attention. However, there are still many problems with this technology, such as heat loss and salt accumulation. Due to their different structures and adjustable chemical composition, electrospun nanofiber materials generally exhibit some unique properties that provide new approaches to address the aforementioned issues. In this review, the rational design principles for improving the total efficiency of solar evaporation are described for thermal/water management systems and salt-resistance strategies. And we review the state-of-the-art advancements in photothermal evaporation based on nanofiber materials and discuss their derivative applications in desalination, water purification, and power generation. Finally, we highlight key challenges and opportunities in both fundamental research and practical applications to inform further developments in the field of interfacial evaporation.

Designing of anisotropic gradient surfaces for directional liquid transport: Fundamentals, construction, and applications.

Many biological surfaces are capable of transporting liquids in a directional manner without energy consumption. Inspired by nature, constructing asymmetric gradient surfaces to achieve desired droplet transport, such as a liquid diode, brings an incredibly valuable and promising area of research with a wide range of applications. Enabled by advances in nanotechnology and manufacturing techniques, biomimetics has emerged as a promising avenue for engineering various types of anisotropic material system. Over the past few decades, this approach has yielded significant progress in both fundamental understanding and practical applications. Theoretical studies revealed that the heterogeneous composition and topography mainly govern the wetting mechanisms and dynamics behavior of droplets, including the interdisciplinary aspects of materials, chemistry, and physics. In this review, we provide a concise overview of various biological surfaces that exhibit anisotropic droplet transport. We discussed the theoretical foundations and mechanisms of droplet motion on designed surfaces and reviewed recent research advances in droplet directional transport on designed plane surfaces and Janus membranes. Such liquid-diode materials yield diverse promising applications, involving droplet collection, liquid separation and delivery, functional textiles, and biomedical applications. We also discuss the recent challenges and ongoing approaches to enhance the functionality and application performance of anisotropic materials.

Bilayer Nanoporous Polyethylene Membrane with Anisotropic Wettability for Rapid Water Transportation/Evaporation and Radiative Cooling.

Both sweat drainage and evaporation play important roles in achieving personal moisture and thermal management during sweat-producing exercises. However, it remains a great challenge to simultaneously realize thermal management through radiative cooling for human body without perspiration. Herein, we report a bilayer nanoporous polyethylene membrane with anisotropic wettability, which possesses superior radiative cooling ability (∼2.6 °C lower than that of cotton) without perspiration. Meanwhile, it realizes efficient sweat drainage and good evaporation cooling property (∼1.0 °C lower than that of cotton) in perspiration to avoid sticky and hot sensation. In addition, it can also block water and fine particulate matter owing to the hydrophobic nanoporous structure. By virtue of the outstanding personal thermal and moisture management performance, it is expected that this study provides inspiration for designing new clothing and medical protective suits with more comfortable microclimates and reducing energy consumption for global sustainability.

Continuous g-C3N4 layer-coated porous TiO2 fibers with enhanced photocatalytic activity toward H2 evolution and dye degradation.

TiO2/g-C3N4 composite photocatalysts with various merits, including low-cost, non-toxic, and environment friendliness, have potential application for producing clean energy and removing organic pollutants to deal with the global energy shortage and environmental contamination. Coating a continuous g-C3N4 layer on TiO2 fibers to form a core/shell structure that could improve the separation and transit efficiency of photo-induced carriers in photocatalytic reactions is still a challenge. In this work, porous TiO2 (P-TiO2)@g-C3N4 fibers were prepared by a hard template-assisted electrospinning method together with the g-C3N4 precursor in an immersing and calcination process. The continuous g-C3N4 layer was fully packed around the P-TiO2 fibers tightly to form a TiO2@g-C3N4 core/shell composite with a strong TiO2/g-C3N4 heterojunction, which greatly enhanced the separation efficiency of photo-induced electrons and holes. Moreover, the great length-diameter ratio configuration of the fiber catalyst was favorable for the recycling of the catalyst. The P-TiO2@g-C3N4 core/shell composite exhibited a significantly enhanced photocatalytic performance both in H2 generation and dye degradation reactions under visible light irradiation, owing to the specific P-TiO2@g-C3N4 core/shell structure and the high-quality TiO2/g-C3N4 heterojunction in the photocatalyst. This work offers a promising strategy to produce photocatalysts with high efficiency in visible light through a rational structure design.