New ecological dam for sediment and overlying water pollution treatment based on microbial fuel cell principle.

In this study, a new ecological dam based on the microbial fuel cell principle (MFCED) was designed to remove pollutants from river sediments and water bodies. Sediment organics were better removed in the MFCED mode in comparison with the other two modes (ecological dam with open circuit (OCED) and ecological dam filled with gravel in cathode chamber (GMFCED)). The difference of nitrogen source in water had little effect on the removal of chemical oxygen demand (COD) (70-80%), while nitrate was more readily removed in the MFCED. The voltage curve and power curve were measured to understand the bioelectricity generation of MFCED. During the stable operation phase of MFCED, the voltage was stabilized between 0.09-0.15 V. The results of high-throughput sequencing indicated that the anode and cathode diversities of MFCED were more than the other systems, and the species diversity of the anode was more than that of the cathode in the MFCED. Graphical abstract.

Adsorption characteristics of Cu(II) and Zn(II) by nano-alumina material synthesized by the sol-gel method in batch mode.

This study mainly focuses on the preparation, characterization, and sorption performance for Cu(II) and Zn(II) by using nano-alumina material (NA) synthesized through the sol-gel method. The SEM, EDS, FT-IR, and XRD analysis methods were implemented to identify the micromorphology and crystal structure of the synthesized NA absorbent and its structure after the adsorbing procedure. The effect of effective variables including various absorbent dose, contact time, initial ion concentration, and temperature on the removal of Cu(II) and Zn(II) from aqueous solution by using NA was investigated through a single factor experiment. Kinetic studies indicated that adsorption of copper and zinc ions by NA was chemical adsorption. The adsorption isotherm data were fitted by Langmuir (R2: 0.919, 0.914), Freundlich (R2: 0.983, 0.993), and Temkin (R2: 0.876, 0.863) isotherms, indicating that copper and zinc ions were easily adsorbed by NA with maximum adsorption capacities of 87.7 and 77.5 mg/g for Cu2+ and Zn2+, respectively. Thermodynamic parameters indicated that the adsorption of Cu2+ was spontaneous(G<0) and the adsorption of Zn2+ might not be spontaneous (G > 0) by NA. Graphical abstract ᅟ.