A universal interface for plug-and-play assembly of stretchable devices.

Stretchable hybrid devices have enabled high-fidelity implantable1-3 and on-skin4-6 monitoring of physiological signals. These devices typically contain soft modules that match the mechanical requirements in humans7,8 and soft robots9,10, rigid modules containing Si-based microelectronics11,12 and protective encapsulation modules13,14. To make such a system mechanically compliant, the interconnects between the modules need to tolerate stress concentration that may limit their stretching and ultimately cause debonding failure15-17. Here, we report a universal interface that can reliably connect soft, rigid and encapsulation modules together to form robust and highly stretchable devices in a plug-and-play manner. The interface, consisting of interpenetrating polymer and metal nanostructures, connects modules by simply pressing without using pastes. Its formation is depicted by a biphasic network growth model. Soft-soft modules joined by this interface achieved 600% and 180% mechanical and electrical stretchability, respectively. Soft and rigid modules can also be electrically connected using the above interface. Encapsulation on soft modules with this interface is strongly adhesive with an interfacial toughness of 0.24 N mm-1. As a proof of concept, we use this interface to assemble stretchable devices for in vivo neuromodulation and on-skin electromyography, with high signal quality and mechanical resistance. We expect such a plug-and-play interface to simplify and accelerate the development of on-skin and implantable stretchable devices.

High-efficiency stretchable light-emitting polymers from thermally activated delayed fluorescence.

Stretchable light-emitting materials are the key components for realizing skin-like displays and optical biostimulation. All the stretchable emitters reported to date, to the best of our knowledge, have been based on electroluminescent polymers that only harness singlet excitons, limiting their theoretical quantum yield to 25%. Here we present a design concept for imparting stretchability onto electroluminescent polymers that can harness all the excitons through thermally activated delayed fluorescence, thereby reaching a near-unity theoretical quantum yield. We show that our design strategy of inserting flexible, linear units into a polymer backbone can substantially increase the mechanical stretchability without affecting the underlying electroluminescent processes. As a result, our synthesized polymer achieves a stretchability of 125%, with an external quantum efficiency of 10%. Furthermore, we demonstrate a fully stretchable organic light-emitting diode, confirming that the proposed stretchable thermally activated delayed fluorescence polymers provide a path towards simultaneously achieving desirable electroluminescent and mechanical characteristics, including high efficiency, brightness, switching speed and stretchability as well as low driving voltage.

Skin electronics from scalable fabrication of an intrinsically stretchable transistor array.

Skin-like electronics that can adhere seamlessly to human skin or within the body are highly desirable for applications such as health monitoring, medical treatment, medical implants and biological studies, and for technologies that include human-machine interfaces, soft robotics and augmented reality. Rendering such electronics soft and stretchable-like human skin-would make them more comfortable to wear, and, through increased contact area, would greatly enhance the fidelity of signals acquired from the skin. Structural engineering of rigid inorganic and organic devices has enabled circuit-level stretchability, but this requires sophisticated fabrication techniques and usually suffers from reduced densities of devices within an array. We reasoned that the desired parameters, such as higher mechanical deformability and robustness, improved skin compatibility and higher device density, could be provided by using intrinsically stretchable polymer materials instead. However, the production of intrinsically stretchable materials and devices is still largely in its infancy: such materials have been reported, but functional, intrinsically stretchable electronics have yet to be demonstrated owing to the lack of a scalable fabrication technology. Here we describe a fabrication process that enables high yield and uniformity from a variety of intrinsically stretchable electronic polymers. We demonstrate an intrinsically stretchable polymer transistor array with an unprecedented device density of 347 transistors per square centimetre. The transistors have an average charge-carrier mobility comparable to that of amorphous silicon, varying only slightly (within one order of magnitude) when subjected to 100 per cent strain for 1,000 cycles, without current-voltage hysteresis. Our transistor arrays thus constitute intrinsically stretchable skin electronics, and include an active matrix for sensory arrays, as well as analogue and digital circuit elements. Our process offers a general platform for incorporating other intrinsically stretchable polymer materials, enabling the fabrication of next-generation stretchable skin electronic devices.

Under-Coordinated CoFe Layered Double Hydroxide Nanocages Derived from Nanoconfined Hydrolysis of Bimetal Organic Compounds for Efficient Electrocatalytic Water Oxidation.

Hierarchically structured bimetal hydroxides are promising for electrocatalytic oxygen evolution reaction (OER), yet synthetically challenging. Here, the nanoconfined hydrolysis of a hitherto unknown CoFe-bimetal-organic compound (b-MOC) is reported for the controllable synthesis of highly OER active nanostructures of CoFe layered double hydroxide (LDH). The nanoporous structures trigger the nanoconfined hydrolysis in the sacrificial b-MOC template, producing CoFe LDH core-shell octahedrons, nanoporous octahedrons, and hollow nanocages with abundant under-coordinated metal sites. The hollow nanocages of CoFe LDH demonstrate a remarkable turnover frequency (TOF) of 0.0505 s-1 for OER catalysis at an overpotential of 300 mV. It is durable in up to 50 h of electrolysis at step current densities of 10-100 mA cm-2 . Ex situ and in situ X-ray absorption spectroscopic analysis combined with theoretical calculations suggests that under-coordinated Co cations can bind with deprotonated Fe-OH motifs to form OER active Fe-O-Co dimmers in the electrochemical oxidation process, thereby contributing to the good catalytic activity. This work presents an efficient strategy for the synthesis of highly under-coordinated bimetal hydroxide nanostructures. The mechanistic understanding underscores the power of maximizing the amount of bimetal-dimer sites for efficient OER catalysis.

MLAM: Multi-Layer Attention Module for Radar Extrapolation Based on Spatiotemporal Sequence Neural Network.

Precipitation nowcasting is mainly achieved by the radar echo extrapolation method. Due to the timing characteristics of radar echo extrapolation, convolutional recurrent neural networks (ConvRNNs) have been used to solve the task. Most ConvRNNs have been proven to perform far better than traditional optical flow methods, but they still have fatal problems. These models lack differentiation in the prediction of echoes of different intensities, which leads to the omission of responses from regions with high intensities. Moreover, because it is difficult for these models to capture long-term feature dependencies among multiple echo maps, the extrapolation effect declines sharply over time. This paper proposes an embedded multi-layer attention module (MLAM) to address the shortcomings of ConvRNNs. Specifically, an MLAM mainly enhances attention to critical regions in echo images and the processing of long-term spatiotemporal features through the interaction between input and memory features in the current moment. Comprehensive experiments were conducted on the radar dataset HKO-7 provided by the Hong Kong Observatory and the radar dataset HMB provided by the Hunan Meteorological Bureau. Experiments show that ConvRNNs embedded with MLAMs achieve more advanced results than standard ConvRNNs.

Anti- Toxoplasma gondii Properties of Ginseng polysaccharides and saponins.

New anti- Toxoplasma gondii agents are in demand due to the emergence of high toxicity. Ginseng polysaccharides and saponins can be used to treat the replication of Toxoplasma gondii in an attempt to determine whether the medicinal uses of ginseng are supported by pharmacological effects. Anti- Toxoplasma gondii activities of ginseng polysaccharides and saponins were examined in vitro and in vivo. The findings are the survival time and rate of Toxoplasma gondii infected mice after the intake of the total polysaccharides and saponins increased compared to untreated control mice. The survival rate of mice treated with ginseng saponins was the highest at 83.3%, the phenomenon of splenomegaly of mice was decreased especially ( p < 0.05) treated with ginseng polysaccharides. Accordingly, ginseng polysaccharides and saponins have a potential application in anti-Toxoplasma gondii treatments.

The protective effect of safranal against intestinal tissue damage in Drosophila.

Drosophila is often exposed to harmful environments, and the intestinal epithelium is the first line of defense against external infection. Intestinal stem cells (ISCs) in the Drosophila midgut play a crucial role in maintaining tissue homeostasis and compensating for cell loss caused by tissue damage. Crocus sativus L. (saffron) can protect against intestinal injury in response to inflammation; however, the specific protective components of saffron and the related mechanisms remain unclear. Safranal is one of the main components of saffron. Here, we used dextran sodium sulfate (DSS) or Erwinia carotovora carotovora 15 (Ecc15) to create an intestinal injury model and explored the protective effect of safranal against tissue damage. Excessive proliferation and differentiation of ISCs in the Drosophila midgut were observed after DSS or Ecc15 feeding; however, these phenotypes were rescued after safranal feeding. In addition, we found that this process occurred through inhibition of the c-Jun N-terminal kinase (JNK), epidermal growth factor receptor (EGFR) and Janus kinase (JAK)/signal transducer and activator of transcription (STAT) pathways. Furthermore, safranal inhibited the Ecc15- and DSS-induced increases in antimicrobial peptide (AMP) and reactive oxygen species (ROS) levels and intestinal epithelial cell death, thereby protecting gut integrity. In summary, safranal was found to have a significant protective effect and maintain intestinal homeostasis in Drosophila; these findings provide a foundation for the application of safranal in clinical research and the treatment of intestinal injury.

Anti-Toxoplasma gondii agent isolated from Orostachys malacophylla (Pallas) Fischer.

Botanical medicinal plants have aroused our interest to deal with Toxoplasmosis which can causes serious public health problems. Nipagic acid, gallic acid, ethyl gallate, phloretic acid, protocatechuic acid, methyl p-coumarate, arbutin, and homoprotocatechuic acid are first isolated from Orostachys malacophylla (Pallas) Fischer, their inhibition rate, survival rate, biochemical and viscera index are evaluated using gastric epithelia strain-1(GES-1). Among them, arbutin can effectively prolong the survival time of mice acutely infected with T. gondii, and exhibit the same curative effect as Spiramycin (Spi) group in terms of the glutathione (GSH) and malondialdehyde (MDA) content, alleviate hepatomegaly and splenomegaly. Structure-activity relationship (SAR) and molecular docking implies that phenolic hydroxyl group would be preferred for improvement of activity. In a summary, arbutin is a potential anti-T. gondii candidate for clinical application.

Design, Synthesis, and Biological Activity of Chalcone Analogs Containing 4-Phenylquinolin and Benzohydrazide.

A series of chalcone derivatives (3a-3m) containing 4-phenylquinoline and benzohydrazide were designed and synthesized, and their anti-inflammatory, analgesic, and antidepressant activities were evaluated. Using the classic antidepressant model, except for compounds 3a and 3d, 11 compounds all showed certain antidepressant activity at a dose of 100 mg/kg, among which compounds 3f, 3h, and 3m showed good antidepressant activity (inhibition rate, respectively 63.0 %, 73.2 %, and 76.4 %), which was equivalent to the positive control fluoxetine (inhibition rate of 70.0 %). Secondly, the inhibitory activity of these compounds on mouse MAOA was evaluated. At 10 mM, compounds 3f and 3j showed a certain selective inhibitory effect on mouse MAOA , while compounds 3b, 3d, 3g, 3i, and 3m had a good inhibitory effect on mouse MAOA (inhibition rate is 42.3-71.4 %). The mouse ear edema model was used to evaluate the anti-inflammatory activity of compounds 3a-3m. At 30 mg/kg, compounds 3b, 3c, 3e, 3f, 3g, and 3m showed certain anti-inflammatory effects (inhibition rate of 51.5-99.9 %), which was equivalent to the positive control indomethacin (inhibition rate of 69.7 %). Results of the acetic acid-induced abdominal writhing test showed that, at 30 mg/kg, excepted for compounds 3a, 3b and 3d, all the other 10 compounds can show certain analgesic activity (inhibition rate 67-99.9 %). The use of Auto dock Vina (simina) to simulate molecular target docking shows that the development of quinoline and benzohydrazide groups is of great significance to MAOA inhibitors.

Synthesis, Characterization and Biological Evaluation of Benzothiazole-Isoquinoline Derivative.

Currently, no suitable clinical drugs are available for patients with neurodegenerative diseases complicated by depression. Based on a fusion technique to create effective multi-target-directed ligands (MTDLs), we synthesized a series of (R)-N-(benzo[d]thiazol-2-yl)-2-(1-phenyl-3,4-dihydroisoquinolin-2(1H)-yl) acetamides with substituted benzothiazoles and (S)-1-phenyl-1,2,3,4-tetrahydroisoquinoline. All compounds were tested for their inhibitory potency against monoamine oxidase (MAO) and cholinesterase (ChE) by in vitro enzyme activity assays, and further tested for their specific inhibitory potency against monoamine oxidase B (MAO-B) and butyrylcholinesterase (BuChE). Among them, six compounds (4b-4d, 4f, 4g and 4i) displayed excellent activity. The classical antidepressant forced swim test (FST) was used to verify the in vitro results, revealing that six compounds reduced the immobility time significantly, especially compound 4g. The cytotoxicity of the compounds was assessed by the MTT method and Acridine Orange (AO) staining, with cell viability found to be above 90% at effective compound concentrations, and not toxic to L929 cells reversibility, kinetics and molecular docking studies were also performed using compound 4g, which showed the highest MAO-B and BuChE inhibitory activities. The results of these studies showed that compound 4g binds to the primary interaction sites of both enzymes and has good blood-brain barrier (BBB) penetration. This study provides new strategies for future research on neurodegenerative diseases complicated by depression.

Tuning Thermal Dosage to Facilitate Mesenchymal Stem Cell Osteogenesis in Pro-Inflammatory Environment.

Mesenchymal stem cells (MSCs) are multipotent cells that can replicate and differentiate to different lineages, potentiating their use as integral components in regenerated mesenchymal tissues. Our previous work and other studies have indicated that mild heat shock enhances osteogenesis. However, the influence of pro-inflammatory cytokines on osteogenic differentiation during mildly elevated temperature conditions remains to be fully explored. In this study, human MSCs (hMSCs) were cultured with tumor necrosis factor-alpha (TNF-α), an important mediator of the acute phase response, and interleukin-6 (IL-6) which plays a role in damaging chronic inflammation, then heat shocked at 39 °C in varying frequencies-1 h per week (low), 1 h every other day (mild), and 1 h intervals three times per day every other day (high). DNA data showed that periodic mild heating inhibited suppression of cell growth caused by cytokines and induced maximal proliferation of hMSCs while high heating had the opposite effect. Quantitative osteogenesis assays show significantly higher levels of alkaline phosphatase (ALP) activity and calcium precipitation in osteogenic cultures following mild heating compared to low heating or nonheated controls. These results demonstrate that periodic mild hyperthermia may be used to facilitate bone regeneration using hMSCs, and therefore may influence the design of heat-based therapies in vivo.

Multi-scale ordering in highly stretchable polymer semiconducting films.

Stretchable semiconducting polymers have been developed as a key component to enable skin-like wearable electronics, but their electrical performance must be improved to enable more advanced functionalities. Here, we report a solution processing approach that can achieve multi-scale ordering and alignment of conjugated polymers in stretchable semiconductors to substantially improve their charge carrier mobility. Using solution shearing with a patterned microtrench coating blade, macroscale alignment of conjugated-polymer nanostructures was achieved along the charge transport direction. In conjunction, the nanoscale spatial confinement aligns chain conformation and promotes short-range π-π ordering, substantially reducing the energetic barrier for charge carrier transport. As a result, the mobilities of stretchable conjugated-polymer films have been enhanced up to threefold and maintained under a strain up to 100%. This method may also serve as the basis for large-area manufacturing of stretchable semiconducting films, as demonstrated by the roll-to-roll coating of metre-scale films.

Apoptosis detection via automated algorithms to analyze biomarker translocation in reporter cells.

Rapid, efficient, and robust quantitative analyses of dynamic apoptotic events are essential in a high-throughput screening workflow. Currently used methods have several bottlenecks, specifically, limitations in available fluorophores for downstream assays and misinterpretation of statistical image data analysis. In this study, we developed cytochrome-C (Cyt-C) and caspase-3/-8 reporter cell lines using lung (PC9) and breast (T47D) cancer cells, and characterized them from the response to apoptotic stimuli. In these two reporter cell lines, the spatial fluorescent signal translocation patterns served as reporters of activations of apoptotic events, such as Cyt-C release and caspase-3/-8 activation. We also developed a vision-based, tunable, automated algorithm in MATLAB to implement the robust and accurate analysis of signal translocation in single or multiple cells. Construction of the reporter cell lines allows live monitoring of apoptotic events without the need for any other dyes or fixatives. Our algorithmic implementation forgoes the use of simple image statistics for more robust analytics. Our optimized algorithm can achieve a precision greater than 90% and a sensitivity higher than 85%. Combining our automated algorithm with reporter cells bearing a single-color dye/fluorophore, we expect our approach to become an integral component in the high-throughput drug screening workflow.

Synthesis and evaluations of selective COX-2 inhibitory effects: Benzo[d]thiazol analogs.

A series of benzo[d]thiazole analogs were synthesized and evaluated for their anti-inflammatory and analgesic effects. Using an ear edema model, except for compounds 2k, 2m-2q and 3a, other compounds showed the anti-inflammatory effects. Among them, compounds 2c, 2d, and 2g showed the best anti-inflammatory activity (inhibition rate: 86.8%, 90.7% and 82.9%, respectively). By the acetic acid-induced abdominal writhing test, except for compounds 2e, 2l, 2m, 2o, 2p and 3a, other compounds showed the analgesic effects with inhibition rate values of 51.9-100% (2a-2r) and 68.6-100% (3a-3g). Next, compounds 2c, 2d, 2g, 3d, 3f, 3g that displayed the excellent anti-inflammatory and analgesic activities were evaluated for their inhibitory effect against ovine COX-1 and COX-2. Compounds 2c, 2d, 2g, 3d, 3f, 3g were weak inhibitors of the COX-1 isozyme but exhibited the moderate COX-2 isozyme inhibitory effects IC50 from 0.28 to 0.77 µM and COX-2 selectivity indexes (SI: 18.6 to 7.2). This benzo[d]thiazole moiety will be proved to be of great significance for developing more potent COX-2 inhibitors.

Potential α-glucosidase inhibitor from Hylotelephium erythrostictum.

In light of the adequate sources for Hylotelephium erythrostictum, its active components have aroused research interest. 2-(3',4'-dihydroxyphenyl)-2,3-dihydro-4,6-dihydroxy-2-(methoxy)- 3-benzofuranone(1), apigenin(2), diosmetin(3), kaempferol(4), kaempferide(5), rhamnocitrin(6), quercetin(7), and gallic acid(8) were isolated from H. erythrostictum. Rarely occurring naturally, 1 is 2-methoxybenzofuranone type compound against α-glucosidase and exhibits a potential inhibitory effect on α-glucosidase(IC50 = 1.8 µM), with a Ki value of 709 nM. In silico molecular docking was performed for the investigation of the inhibition mechanism. H. erythrostictum is a potential source of antidiabetic agent. This information is useful in finding more potent antidiabetic candidates from medicinal plants for the clinical development of therapeutics.

Acanthopanax senticosus polysaccharide regulates the intestinal homeostasis disruption induced by toxic chemicals in Drosophila.

The intestinal epithelium provides the first line of defense against pathogens and toxic compounds. The ingestion of toxic compounds causes an enhanced epithelial cell death and an excessive proliferation of intestinal stem cells, eventually resulting in the disruption of gut homeostasis. In this study, Drosophila gut inflammation model induced by toxic compounds was exploited to analyze the ameliorative effect of Acanthopanax senticosus polysaccharide on the disruption of gut homeostasis. As a result, it was found that A. senticosus polysaccharide can significantly increase the survival rate of Drosophila adults as well as reduce the excessive proliferation and differentiation of intestinal stem cells through epidermal growth factor receptor, jun-N-terminal kinase, and Notch signaling pathways under the exposure to toxic compounds dextran sodium sulfate. Moreover, the polysaccharide effectively decreased the epithelial cell death and the accumulation of reactive oxygen species and antimicrobial peptides induced by sodium dodecyl sulfate. In addition, it was found that A. senticosus polysaccharide can extend the lifespan of only female flies but not male flies. In conclusion, A. senticosus polysaccharide has an obvious protective effect on the gut homeostasis of Drosophila melanogaster.

Skin-Inspired Electronics: An Emerging Paradigm.

Future electronics will take on more important roles in people's lives. They need to allow more intimate contact with human beings to enable advanced health monitoring, disease detection, medical therapies, and human-machine interfacing. However, current electronics are rigid, nondegradable and cannot self-repair, while the human body is soft, dynamic, stretchable, biodegradable, and self-healing. Therefore, it is critical to develop a new class of electronic materials that incorporate skinlike properties, including stretchability for conformable integration, minimal discomfort and suppressed invasive reactions; self-healing for long-term durability under harsh mechanical conditions; and biodegradability for reducing environmental impact and obviating the need for secondary device removal for medical implants. These demands have fueled the development of a new generation of electronic materials, primarily composed of polymers and polymer composites with both high electrical performance and skinlike properties, and consequently led to a new paradigm of electronics, termed "skin-inspired electronics". This Account covers recent important advances in skin-inspired electronics, from basic material developments to device components and proof-of-concept demonstrations for integrated bioelectronics applications. To date, stretchability has been the most prominent focus in this field. In contrast to strain-engineering approaches that extrinsically impart stretchability into inorganic electronics, intrinsically stretchable materials provide a direct route to achieve higher mechanical robustness, higher device density, and scalable fabrication. The key is the introduction of strain-dissipation mechanisms into the material design, which has been realized through molecular engineering (e.g., soft molecular segments, dynamic bonds) and physical engineering (e.g., nanoconfinement effect, geometric design). The material design concepts have led to the successful demonstrations of stretchable conductors, semiconductors, and dielectrics without sacrificing their electrical performance. Employing such materials, innovative device design coupled with fabrication method development has enabled stretchable sensors and displays as input/output components and large-scale transistor arrays for circuits and active matrixes. Strategies to incorporate self-healing into electronic materials are the second focus of this Account. To date, dynamic intermolecular interactions have been the most effective approach for imparting self-healing properties onto polymeric electronic materials, which have been utilized to fabricate self-healing sensors and actuators. Moreover, biodegradability has emerged as an important feature in skin-inspired electronics. The incorporation of degradable moieties along the polymer backbone allows for degradable conducting polymers and the use of bioderived materials has led to the demonstration of biodegradable functional devices, such as sensors and transistors. Finally, we highlight examples of skin-inspired electronics for three major applications: prosthetic e-skins, wearable electronics, and implantable electronics.

Quadruple H-Bonding Cross-Linked Supramolecular Polymeric Materials as Substrates for Stretchable, Antitearing, and Self-Healable Thin Film Electrodes.

Herein, we report a de novo chemical design of supramolecular polymer materials (SPMs-1-3) by condensation polymerization, consisting of (i) soft polymeric chains (polytetramethylene glycol and tetraethylene glycol) and (ii) strong and reversible quadruple H-bonding cross-linkers (from 0 to 30 mol %). The former contributes to the formation of the soft domain of the SPMs, and the latter furnishes the SPMs with desirable mechanical properties, thereby producing soft, stretchable, yet tough elastomers. The resulting SPM-2 was observed to be highly stretchable (up to 17 000% strain), tough (fracture energy ∼30 000 J/m2), and self-healing, which are highly desirable properties and are superior to previously reported elastomers and tough hydrogels. Furthermore, a gold, thin film electrode deposited on this SPM substrate retains its conductivity and combines high stretchability (∼400%), fracture/notch insensitivity, self-healing, and good interfacial adhesion with the gold film. Again, these properties are all highly complementary to commonly used polydimethylsiloxane-based thin film metal electrodes. Last, we proceed to demonstrate the practical utility of our fabricated electrode via both in vivo and in vitro measurements of electromyography signals. This fundamental understanding obtained from the investigation of these SPMs will facilitate the progress of intelligent soft materials and flexible electronics.

Magnetic separation coupled with high-performance liquid chromatography-mass spectrometry for rapid separation and determination of lignans in Schisandra chinensis.

Despite the strong antihepatotoxic, antioxidant, and antitumor properties of lignans from Schisandra chinensis, their applications in new drug development, bioscience and functional foods, etc. are limited because of their low abundance and complex coextractions. In this study, a magnetic separation method has been developed based on polyethylenimine-modified magnetic nanoparticles to rapidly and effectively separate and purify the lignans from S. chinensis crude extracts through cation-π interaction and electrostatic adsorption. The magnetic nanoparticles were characterized by transmission electron microscopy, vibrating sample magnetometry, Fourier transform infrared spectroscopy, and X-ray diffraction. Polyethylenimine-modified magnetic nanoparticles showed a spherical-shaped morphology and the average size was about 10 nm with superparamagnetism. Under the pH 7.4, polyethylenimine modified magnetic nanoparticles can remove a lot of coextracts. The range of detection limits and quantification limits was 0.27-0.34 and 0.89-1.13 ng/mL, respectively. Compared with other common methods, the magnetic separation method proposed in this study is much simpler and more effective through both strong cation-π interaction and electrostatic interaction.