RESUMO
FeTe1-xSex, a promising layered material used to realize Majorana zero modes, has attracted enormous attention in recent years. Pulsed laser deposition (PLD) and molecular-beam epitaxy (MBE) are the routine growth methods used to prepare FeTe1-xSex thin films. However, both methods require high-vacuum conditions and polished crystalline substrates, which hinder the exploration of the topological superconductivity and related nanodevices of this material. Here we demonstrate the growth of the ultrathin FeTe1-xSex superconductor by a facile, atmospheric pressure chemical vapor deposition (CVD) method. The composition and thickness of the two-dimensional (2D) FeTe1-xSex nanosheets are well controlled by tuning the experimental conditions. The as-prepared FeTe0.8Se0.2 nanosheet exhibits an onset superconducting transition temperature of 12.4 K, proving its high quality. Our work offers an effective strategy for preparing the ultrathin FeTe1-xSex superconductor, which could become a promising platform for further study of the unconventional superconductivity in the FeTe1-xSex system.
RESUMO
In this article, we present a comprehensive review on recent research progress in design and fabrication of active tunable metamaterials and devices based on phase transition of VO2. Firstly, we introduce mechanisms of the metal-to-insulator phase transition (MIPT) in VO2 investigated by ultrafast THz spectroscopies. By analyzing the THz spectra, the evolutions of MIPT in VO2 induced by different external excitations are described. The superiorities of using VO2 as building blocks to construct highly tunable metamaterials are discussed. Subsequently, the recently demonstrated metamaterial devices based on VO2 are reviewed. These metamaterials devices are summarized and described in the categories of working frequency. In each working frequency range, representative metamaterials based on VO2 with different architectures and functionalities are reviewed and the contributions of the MIPT of VO2 are emphasized. Finally, we conclude the recent reports and provide a prospect on the strategies of developing future tunable metamaterials based on VO2.
RESUMO
The development of new thermoelectric conversion and cooling materials is an important means of addressing global climate and heat emissions in the future. While heavy and toxic elements like tellurium and lead are traditionally used to make thermoelectric materials with poor mechanical properties, recent decades have seen a gradual push towards greener and more sustainable alternatives. One such potential alternative material for thermoelectric and thermal management applications would be the Nitinol (TiNi) shape memory alloy, due to their superior mechanical properties. In this study, we have investigated the use of 3D melt printing techniques that can be used to achieve thermoelectric performance and efficiency of elastic memory alloys below 500 °C.ãThe electrical and thermal properties of TiNiCu materials and their relation to morphology were investigated. All the alloys show similar effect sizes, their fatigue behavior is however different. By adjusting the composition of Ti and Ni elements and we have obtained memory alloys with high thermoelectric properties, with a 50% increase in power factor and a 100% increase in ZT values.
RESUMO
Energy transfer is a ubiquitous phenomenon that delivers energy from a blue-shifted emitter to a red-shifted absorber, facilitating wide photonic applications. Two-dimensional (2D) semiconductors provide unique opportunities for exploring novel energy transfer mechanisms in the atomic-scale limit. Herein, we have designed a planar optical microcavity-confined MoS2/hBN/WS2 heterojunction, which realizes the strong coupling among donor exciton, acceptor exciton, and cavity photon mode. This configuration demonstrates an unconventional energy transfer via polariton relaxation, brightening MoS2 with a record-high enhancement factor of ~440, i.e., two-order-of-magnitude higher than the data reported to date. The polariton relaxation features a short characteristic time of ~1.3 ps, resulting from the significantly enhanced intra- and inter-branch exciton-exciton scattering. The polariton relaxation dynamics is associated with Rabi energies in a phase diagram by combining experimental and theoretical results. This study opens a new direction of microcavity 2D semiconductor heterojunctions for high-brightness polaritonic light sources and ultrafast polariton carrier dynamics.
RESUMO
As the Si-based transistors scale down to atomic dimensions, the basic principle of current electronics, which heavily relies on the tunable charge degree of freedom, faces increasing challenges to meet the future requirements of speed, switching energy, heat dissipation, and packing density as well as functionalities. Heterogeneous integration, where dissimilar layers of materials and functionalities are unrestrictedly stacked at an atomic scale, is appealing for next-generation electronics, such as multifunctional, neuromorphic, spintronic, and ultralow-power devices, because it unlocks technologically useful interfaces of distinct functionalities. Recently, the combination of functional perovskite oxides and two-dimensional layered materials (2DLMs) led to unexpected functionalities and enhanced device performance. In this paper, we review the recent progress of the heterogeneous integration of perovskite oxides and 2DLMs from the perspectives of fabrication and interfacial properties, electronic applications, and challenges as well as outlooks. In particular, we focus on three types of attractive applications, namely field-effect transistors, memory, and neuromorphic electronics. The van der Waals integration approach is extendible to other oxides and 2DLMs, leading to almost unlimited combinations of oxides and 2DLMs and contributing to future high-performance electronic and spintronic devices.
RESUMO
Neuromorphic computing (NC), which emulates neural activities of the human brain, is considered for the low-power implementation of artificial intelligence. Toward realizing NC, fabrication, and investigations of hardware elementsâsuch as synaptic devices and neuronsâare crucial. Electrolyte gating has been widely used for conductance modulation by massive carrier injections and has proven to be an effective way of emulating biological synapses. Synaptic devices, in the form of synaptic transistors, have been studied using various materials. Despite the remarkable progress, the study of metallic channel-based synaptic transistors remains massively unexplored. Here, we demonstrated a three-terminal electrolyte gating-modulated synaptic transistor based on a metallic cobalt thin film to emulate biological synapses. We have realized gating-controlled, non-volatile, and distinct multilevel conductance states in the proposed device. The essential synaptic functions demonstrating both short-term and long-term plasticity have been emulated in the synaptic device. A transition from short-term to long-term memory has been realized by tuning the gate pulse parameters, such as amplitude and duration. The crucial cognitive behavior, including learning, forgetting, and re-learning, has been emulated, showing a resemblance to the human brain. Beyond that, dynamic filtering behavior has been experimentally implemented in the synaptic device. These results provide an insight into the design of metallic channel-based synaptic transistors for NC.
Assuntos
Materiais Biomiméticos , Cobalto/química , Metodologias Computacionais , Plasticidade Neuronal/fisiologia , Sinapses/fisiologia , Transistores Eletrônicos , Inteligência Artificial , Aprendizagem , Neurônios/fisiologiaRESUMO
Metasurfaces, a two-dimensional (2D) form of metamaterials constituted by planar meta-atoms, exhibit exotic abilities to tailor electromagnetic (EM) waves freely. Over the past decade, tremendous efforts have been made to develop various active materials and incorporate them into functional devices for practical applications, pushing the research of tunable metasurfaces to the forefront of nanophotonics. Those active materials include phase change materials (PCMs), semiconductors, transparent conducting oxides (TCOs), ferroelectrics, liquid crystals (LCs), atomically thin material, etc., and enable intriguing performances such as fast switching speed, large modulation depth, ultracompactness, and significant contrast of optical properties under external stimuli. Integration of such materials offers substantial tunability to the conventional passive nanophotonic platforms. Tunable metasurfaces with multifunctionalities triggered by various external stimuli bring in rich degrees of freedom in terms of material choices and device designs to dynamically manipulate and control EM waves on demand. This field has recently flourished with the burgeoning development of physics and design methodologies, particularly those assisted by the emerging machine learning (ML) algorithms. This review outlines recent advances in tunable metasurfaces in terms of the active materials and tuning mechanisms, design methodologies, and practical applications. We conclude this review paper by providing future perspectives in this vibrant and fast-growing research field.
RESUMO
Ferroelectric memories with ultralow-power-consumption are attracting a great deal of interest with the ever-increasing demand for information storage in wearable electronics. However, sufficient scalability, semiconducting compatibility, and robust flexibility of the ferroelectric memories remain great challenges, e.g., owing to Pb-containing materials, oxide electrode, and limited thermal stability. Here, high-performance flexible nonvolatile memories based on ferroelectric Hf0.5Zr0.5O2 (HZO) via quasi-van der Waals heteroepitaxy are reported. The flexible ferroelectric HZO exhibits not only high remanent polarization up to 32.6 µC cm-2 without a wake-up effect during cycling, but also remarkably robust mechanical properties, degradation-free retention, and endurance performance under a series of bent deformations and cycling tests. Intriguingly, using HZO as a gate, flexible ferroelectric thin-film transistors with a low operating voltage of ±3 V, high on/off ratio of 6.5 × 105, and a small subthreshold slope of about 100 mV dec-1, which outperform reported flexible ferroelectric transistors, are demonstrated. The results make ferroelectric HZO a promising candidate for the next-generation of wearable, low-power, and nonvolatile memories with manufacturability and scalability.
RESUMO
Transition metal oxides exhibit strong structure-property correlations, which has been extensively investigated and utilized for achieving efficient oxygen electrocatalysts. However, high-performance oxide-based electrocatalysts for hydrogen evolution are quite limited, and the mechanism still remains elusive. Here we demonstrate the strong correlations between the electronic structure and hydrogen electrocatalytic activity within a single oxide system Ti2O3. Taking advantage of the epitaxial stabilization, the polymorphism of Ti2O3 is extended by stabilizing bulk-absent polymorphs in the film-form. Electronic reconstructions are realized in the bulk-absent Ti2O3 polymorphs, which are further correlated to their electrocatalytic activity. We identify that smaller charge-transfer energy leads to a substantial enhancement in the electrocatalytic efficiency with stronger hybridization of Ti 3d and O 2p orbitals. Our study highlights the importance of the electronic structures on the hydrogen evolution activity of oxide electrocatalysts, and also provides a strategy to achieve efficient oxide-based hydrogen electrocatalysts by epitaxial stabilization of bulk-absent polymorphs.
RESUMO
Resistive switching phenomena form the basis of competing memory technologies. Among them, resistive switching, originating from oxygen vacancy migration (OVM), and ferroelectric switching offer two promising approaches. OVM in oxide films/heterostructures can exhibit high/low resistive state via conducting filament forming/deforming, while the resistive switching of ferroelectric tunnel junctions (FTJs) arises from barrier height or width variation while ferroelectric polarization reverses between asymmetric electrodes. Here the authors demonstrate a coexistence of OVM and ferroelectric induced resistive switching in a BaTiO3 FTJ by comparing BaTiO3 with SrTiO3 based tunnel junctions. This coexistence results in two distinguishable loops with multi-nonvolatile resistive states. The primary loop originates from the ferroelectric switching. The second loop emerges at a voltage close to the SrTiO3 switching voltage, showing OVM being its origin. BaTiO3 based devices with controlled oxygen vacancies enable us to combine the benefits of both OVM and ferroelectric tunneling to produce multistate nonvolatile memory devices.
RESUMO
Through alignment of theoretical modeling with experimental measurements of oxygen surface exchange kinetics on (001)-oriented La2-xSrxMO4+δ (M = Co, Ni, Cu) thin films, we demonstrate here the capability of the theoretical bulk O 2p-band centers to correlate with oxygen surface-exchange kinetics of the Ruddlesden-Popper oxide (RP214) (001)-oriented thin films. In addition, we demonstrate that the bulk O 2p-band centers can also correlate with the experimental activation energies for bulk oxygen transport and oxygen surface exchange of both the RP214 and the perovskite polycrystalline materials reported in the literature, indicating the effectiveness of the bulk O 2p-band centers in describing the associated energetics and kinetics. We propose that the opposite slopes of the bulk O 2p-band center correlations between the RP214 and the perovskite materials are due to the intrinsic mechanistic differences of their oxygen surface exchange kinetics and bulk anionic transport.
RESUMO
The 2D electron gas at the polar/non-polar oxide interface has become an important platform for several novel oxide electronic devices. In this paper, the transport properties of a wide range of polar perovskite oxide ABO3/SrTiO3 (STO) interfaces, where ABO3 includes LaAlO3, PrAlO3, NdAlO3, NdGaO3 and LaGaO3 in both crystalline and amorphous forms, were investigated. A robust 4 unit cell (uc) critical thickness for metal insulator transition was observed for crystalline polar layer/STO interface while the critical thickness for amorphous ones was strongly dependent on the B site atom and its oxygen affinity. For the crystalline interfaces, a sharp transition to the metallic state (i.e. polarization catastrophe induced 2D electron gas only) occurs at a growth temperature of 515 °C which corresponds to a critical relative crystallinity of ~70 ± 10% of the LaAlO3 overlayer. This temperature is generally lower than the metal silicide formation temperature and thus offers a route to integrate oxide heterojunction based devices on silicon.
RESUMO
Patterning of the two-dimensional electron gas formed at the interface of two band insulators such as LaAlO3/SrTiO3 is one of the key challenges in oxide electronics. The use of energetic ion beam exposure for engineering the interface conductivity has been investigated. We found that this method can be utilized to manipulate the conductivity at the LaAlO3/SrTiO3 interface by carrier localization, arising from the defects created by the ion beam exposure, eventually producing an insulating ground state. This process of ion-beam-induced defect creation results in structural changes in SrTiO3 as revealed by the appearance of first-order polar TO2 and TO4 vibrational modes which are associated with Ti-O bonds in the Raman spectra of the irradiated samples. Furthermore, significant observation drawn from the magnetotransport measurements is that the irradiated (unirradiated) samples showed a negative (positive) magnetoresistance along with simultaneous emergence of first-order (only second order) Raman modes. In spectroscopic ellipsometry measurements, the optical conductivity features of the irradiated interface are broadened because of the localization effects, along with a decrease of spectral weight from 4.2 to 5.4 eV. These experiments allow us to conclude that the interface ground state (metallic/insulating) at the LaAlO3/SrTiO3 can be controlled by tailoring the defect structure of the SrTiO3 with ion beam exposure. A resist-free, single-step direct patterning of a conducting LaAlO3/SrTiO3 interface has been demonstrated. Patterns with a spatial resolution of 5 µm have been fabricated using a stencil mask, while nanometer scale patterns may be possible with direct focused ion beam writing.