RESUMO
Development of well-constructed metal-organic framework (MOF) membranes can bring about breakthroughs in nanofiltration (NF) performance for water treatment applications, while the relatively loose structures and inevitable defects usually cause low rejection capacity of MOF membranes. Herein, a confined interfacial polymerization (CIP) method is showcased to synthesize polyamide (PA)-modified NF membranes with MOF nanosheets as the building blocks, yielding a stepwise transition from two-dimensional (2D) MOF membranes to polyamide NF membranes. The CIP process was regulated by adjusting the loading amount of piperazine (PIP)-grafted MOF nanosheets on substrates and the additional content of free PIP monomers distributed among the nanosheets, followed by the reaction with trimesoyl chloride in the organic phase. The prepared optimal membrane exhibited a high Na2SO4 rejection of 98.4% with a satisfactory water permeance of 37.4 L·m-2·h-1·bar-1, which could be achieved by neither the pristine 2D MOF membranes nor the PA membranes containing the MOF nanosheets as the conventional interlayer. The PA-modified MOF membrane also displayed superior stability and enhanced antifouling ability. This CIP strategy provides a novel avenue to develop efficient MOF-based NF membranes with high ion-sieving separation performance for water treatment.
Assuntos
Estruturas Metalorgânicas , Nylons , Polimerização , CloretosRESUMO
Nanofiltration (NF), highly prospective for drinking water treatment, faces a challenge in simultaneously removing emerging contaminants while maintaining mineral salts, particularly divalent cations. To overcome this challenge, NF membranes possessing small pores concomitant with highly negatively charged surfaces were synthesized via a two-step fabrication strategy. The key is to generate a polyamide active layer having a loose and carboxyl group-abundant segment on top and a dense barrier segment underneath. This was achieved by restrained interfacial polymerization between trimesoyl chloride and partly protonated piperazine to form a highly depth-heterogeneous polyamide network, followed by second amidation in an organic environment to remove untethered polyamide fragments and associate malonyl chlorides with reserved amine groups to introduce more negative charges. Most importantly, on first-principle engineering the spatial architecture of the polyamide layer, amplifying asymmetric charge distribution was paired with the thinning of the vertical structure. The optimized membrane exhibits high salt/organic rejection selectivity and water permeance superior to most NF membranes reported previously. The rejections of eight emerging contaminants were in the range of 66.0-94.4%, much higher than the MgCl2 rejection of 41.1%. This new fabrication strategy, suitable for various diacyl chlorides, along with the new membranes so produced, offers a novel option for NF in potable water systems.
Assuntos
Água Potável , Nylons , Aminas , Cátions Bivalentes , Cloretos , Membranas Artificiais , Minerais , Nylons/química , Piperazina , Estudos Prospectivos , SaisRESUMO
To enhance the use of nanofiltration in the production of quality drinking water, particularly through the efficient removal of micropollutants yet still preserving essential minerals, the targeted nanofiltration membranes (NFMs) are required to have small pore dimensions coupled with a high, net-negative charge density. Herein, after the formation of a separation layer using piperazine interfacially polymerized with trimesoyl chloride, the exploitation of residual amine groups was systematically investigated by different diacyl chlorides in an organic milieu, which caused the upper part of the final separation layer to be denser and highly negatively charged. Hence, this protocol offers a novel means to fabricate NFMs simultaneously endowed with a low molecular cutoff (MWCO) of 145-238 Da and a reduced rejection of MgCl2 (48%-80%) as well as a competitive water permeance. Those features are ideally applicable to the goal of removing small micropollutants while preserving mineral ions, as needed for the energy-efficient production of safe, quality drinking water. Furthermore, an attempt was made to correlate MWCO with MgCl2 rejection, which provides some insights on the nexus of the electrostatic effects constrained by size exclusion. The significance of residual amine groups and the modification environment was unveiled, and this method paves a new avenue for designing functional NFMs.
Assuntos
Água Potável , Nylons , Aminas , Cátions Bivalentes , Membranas ArtificiaisRESUMO
Nanofiltration (NF) is an effective technology for removing trace organic contaminants (TrOCs), while the inherent trade-off effect between water permeance and solute rejections hinders its widespread application in water treatment. Herein, we propose a novel scheme of "monomers with sacrificial groups" to regulate the microstructure of the polyamide active layer via introducing a hydrolyzable ester group onto piperazine to control the diffusion and interfacial polymerization process. The achieved benefits include narrowing the pore size, improving the interpore connectivity, enhancing the microporosity, and reducing the active layer thickness, which collectively realized the simultaneous improvement of water permeance and enhancement of TrOCs rejection performance. The resulting membranes were superior to both the control and commercial membranes, especially in water-TrOCs selectivity. The effects of using the new monomers on the membrane physicochemical properties were systematically studied, and underlying mechanisms for the enhanced separation performance were further revealed by simulating the polymerization process through density functional theory calculation and measuring the trans-interface diffusion rate of monomers. This study demonstrates a novel promising NF membrane synthesis strategy by designing the structure of reaction monomers for achieving excellent rejection of TrOCs with a low energy input in water treatment.
RESUMO
In view of the high risks brought about by organic micropollutants (OMPs), nanofiltration (NF) processes have been playing a vital role in advanced water and wastewater treatment, owing to the high membrane performance in rejection of OMPs, permeation of water, and passage of mineral salts. Though numerous studies have been devoted to evaluating and technically enhancing membrane performance in removing various OMPs, the trade-off effect between water permeance and water/OMP selectivity for state-of-the-art membranes remains far from being understood. Knowledge of this effect is significant for comparing and guiding membrane development works toward cost-efficient OMP removal. In this work, we comprehensively assessed the performance of 88 NF membranes, commercialized or newly developed, based on their water permeance and OMP rejection data published in the literature. The effectiveness and underlying mechanisms of various modification methods in tailoring properties and in turn performance of the mainstream polyamide (PA) thin-film composite (TFC) membranes were quantitatively analyzed. The trade-off effect was demonstrated by the abundant data from both experimental measurements and machine learning-based prediction. On this basis, the advancement of novel membranes was benchmarked by the performance upper-bound revealed by commercial membranes and lab-made PA membranes. We also assessed the potentials of current NF membranes in selectively separating OMPs from inorganic salts and identified the future research perspectives to achieve further enhancement in OMP removal and salt/OMP selectivity of NF membranes.
Assuntos
Membranas Artificiais , Purificação da Água , Estudos Prospectivos , Sais , Purificação da Água/métodos , Nylons , ÁguaRESUMO
Biofouling is a problem affecting the operation of nanofiltration systems due to the complexity of the carbon matrix affecting bacteria and biofilm growth. This study used membrane fouling simulators to investigate the effects of five different carbon sources on the biofouling of nanofiltration membranes. For all the carbon sources analyzed, the increase in pressure drop was most accelerated for acetate. The use of acetate as the single carbon source produced less adenosine triphosphate but more extracellular polymers than glucose. The microbial community was analyzed using 16 s rRNA. The use of more than a single carbon source produced an increase in bacteria diversity even at similar concentrations. The relative abundance of proteobacteria was the highest at the phylum level (95%) when a single carbon source was added. Additionally, it was found that the use of different carbon sources produced a shift in the microbial community, affecting the biofouling and pressure drop on membranes.
Assuntos
Incrustação Biológica , Microbiota , Purificação da Água , Carbono , Membranas Artificiais , Biofilmes , Bactérias/genética , AcetatosRESUMO
Given the increasing usage of drinking water purifiers, highly permeable membranes with strong antimicrobial functions are desperately desirable for effective and durable water disinfection. Hereby, we prepared such antimicrobial membranes by chemical grafting of quaternary ammonium salt (QAS) molecules, 3-(trimethoxysilyl)propyldimethyloctadecyl ammonium chloride (TPMMC), onto air plasma pretreated biodegradable polylactic acid (PLA) substrates. The high chemical grafting density promoted very strong and positive zeta potential charge of the resulted PLA-QAS membrane, contributing to effective and broad-spectrum antimicrobial efficiencies (>99.99%) against different microbes, including fungi and conventional and drug-resistant bacteria. The solid grafting of QAS molecules produced a durable antimicrobial performance of the PLA-QAS membrane. In addition, the pleated filter (0.45 m2) of PLA-QAS membrane showed outstanding bacteria rejection properties (>99.99%) and excellent washing durability (up to 20 m3 water) even at very high water filtration rates (up to 4 L/min). The disinfection mechanism was clarified that negatively charged bacteria could be rapidly adsorbed to positively charged PLA-QAS spinnings, followed by devastating cell membrane damage to bacterial debris, leaving a clean environment without significant biofilm and biofouling formation.
Assuntos
Anti-Infecciosos , Água Potável , Cloreto de Amônio , Antibacterianos/química , Anti-Infecciosos/química , Bactérias , Desinfecção , Poliésteres , Compostos de Amônio Quaternário/química , Compostos de Amônio Quaternário/farmacologiaRESUMO
Fast quantitative determination of active aluminum (Ala) in natural and treated water is extremely desirable. The fluorescence method based on complexation by 8-hydroxyquinoline (8-HQ) is highly promising, but the measurement could be severely interfered by hardness ions and natural organic matter (NOM). This study was devoted to refining the 8-HQ complexation-fluorescence method for measurement of Ala by eliminating the interferences. Results showed that magnesium ions at a typical concentration in natural water could have a substantial positive interference, due to the formation of Mg-8-HQ complexes which have fluorescence regions similar to Al-8-HQ. NOM, represented by fulvic acid (FA), could not interfere the aluminum measurement considerably. It was primarily because 8-HQ has much stronger complexing ability than NOM with aluminum. Theoretical calculations showed that reducing the buffering pH (from 7.5) to 6.5 or using a masking ligand such as edetate (EDTA) could effectively alleviate the interference mainly caused by magnesium. Experimental results confirmed the theoretical predictions. Refined procedures were suggested for more accurate while fast determination of Ala in natural or treated water. The refined method has a quantification limit of ~4 µg/L, a linear range of measurement up to 700 µg/L, and a relative standard deviation of ~0.8%.
Assuntos
Poluentes Químicos da Água , Água , Alumínio/química , Concentração de Íons de Hidrogênio , Magnésio , Água/química , Poluentes Químicos da Água/químicaRESUMO
Membrane technologies have been widely applied in water treatment, wastewater reclamation and seawater desalination. Feed spacer present in spiral wound membrane (SWM) modules plays a pivotal role in creating flow channels, promoting fluid mixing and enhancing mass transfer. However, it induces the increase of feed channel pressure (FCP) drop and localized stagnant zones that provokes membrane fouling. For the first time, we comprehensively review the research evolvement on feed spacer in SWM modules for water treatment over the last 20 years, to reveal the impacts of feed spacer on the hydrodynamics and biofouling in the spacer-filled channel, and to discuss the potential approaches and current limitations for the modification of feed spacer. The research process can be divided into three phases, with research focus shifting from hydrodynamics in Phase â (the year of 2001-2008), to biofouling in Phase â ¡ (the year of 2009-2015), and then to novel spacer designs in Phase â ¢ (the year of 2016-2020). The spacer configuration has a momentous impact on the hydraulic performance regarding flow velocity field, shear stress, mass transfer and FCP drop. Biofouling initially occurs on feed spacer, especially around spacer filaments and the contact zones with membrane surface, and ultimately degrades the overall membrane performance indicating the importance of controlling spacer biofouling. The modification of feed spacer is mainly achieved by altering surface chemistry or introducing novel configurations. However, the stability of spacer coating and the economy and practicality of 3D-printed spacer remain a predicament to be tackled. Future studies are suggested to focus on the standardization of testing conditions for spacer evaluation, the effect of hydrodynamics on membrane fouling control, the design and fabrication of novel feed spacer adaptable for SWM modules, the application of feed spacer for drinking water production, organic fouling control in spacer-filled channel and the role of permeate spacer on membrane performance.
Assuntos
Incrustação Biológica , Purificação da Água , Filtração , Membranas Artificiais , Osmose , ÁguaRESUMO
Feed spacer is universally used in spiral-wound nanofiltration (NF) and reverse osmosis (RO) membrane modules. It can separate membrane sheets, create flow channels, promote turbulence and enhance mass transfer. However, it also induces increased pressure drop across the flow channel, and generates dead zones for biofilm growth at specific locations. Optimization of feed spacer geometries is highly desirable for energy saving and biofouling control. In this study, four kinds of commercial feed spacers featured with non-uniform filaments were compared in terms of hydraulic and anti-fouling performances. Computational fluid dynamics (CFD) simulations were launched to give insights into the impacts of feed spacer characteristics on the flow field. Results show that the hydraulic performance was substantially affected by the number of filament layers (single or dual layer), the non-uniformity of filament diameter and the width of thinning zones. The design of single layer feed spacer of non-uniform filaments was not recommended due to high flow resistance and poor anti-fouling performance. The feed spacer structure of alternating filament diameter contributed to reducing dead zones and alleviating membrane fouling. The thinning zones located adjacent to the filament junctions achieved better anti-fouling performance, as it disturbed the dead zones and partially washed away the deposited foulants. This study demonstrates for the first time that the characteristics of non-uniform filament feed spacer had a crucial impact on the hydraulic and anti-fouling performances, and suggests that more emphasis should be laid on number of filament layers, variation of filament diameter and width and positioning of thinning zones for the optimization of feed spacer geometries in the future.
Assuntos
Incrustação Biológica , Purificação da Água , Filtração , Hidrodinâmica , Canais Iônicos , Membranas Artificiais , OsmoseRESUMO
In this study, we proposed to apply an integrated process which is comprised of in situ ozonation, ceramic membrane filtration (CMF) and biologically active carbon (BAC) filtration to wastewater reclamation for indirect potable reuse purpose. A pilot-scale (20â¯m3/d) experiment had been run for ten months to validate the prospect of the process in terms of treatment performance and operational stability. Results showed that the in situ O3â¯+â¯CMFâ¯+â¯BAC process performed well in pollutant removal, with chemical oxygen demand, ammonia, nitrate nitrogen, total phosphorus and turbidity levels in the treated water being 5.1⯱â¯0.9, 0.05⯱â¯0.01, 10.5⯱â¯0.8, <0.06â¯mg/L, and <0.10 NTU, respectively. Most detected trace organic compounds were degraded by>96%. This study demonstrated that synergistic effects existed in the in situ O3â¯+â¯CMFâ¯+â¯BAC process. Compared to pre-ozonation, in situ ozonation in the membrane tank was more effective in controlling membrane fouling (maintaining operational stability) and in degrading organic pollutants, which could be attributed to the higher residual ozone concentration in the tank. Because of the removal of particulate matter by CMF, water head loss of the BAC filter increased slowly and prolonged the backwashing interval to 30 days. BAC filtration was also effective in removing ammonia and N-nitrosodimethylamine from the ozonated water.
Assuntos
Carvão Vegetal/química , Filtração/métodos , Oxidantes/química , Ozônio/química , Eliminação de Resíduos Líquidos/métodos , Poluentes Químicos da Água/química , Amônia/química , Cafeína/química , Cerâmica , DEET/química , Diterpenos/química , Membranas Artificiais , Nitrogênio/química , Fósforo/química , Teofilina/química , Águas ResiduáriasRESUMO
Metal-organic frameworks (MOFs), a class of hybrid organic-inorganic materials, have recently attracted tremendous interests in the fabrication of thin-film nanocomposite (TFN) membranes with exceptional permselectivity. However, the structure-performance relationship of such membranes, which is a function of both MOF type and membrane fabrication procedure, has not been elucidated in the literature. In this study, three types of hydro-stable MOFs, namely, MIL-53(Al), NH2-UiO-66, and ZIF-8, were used to fabricate TFN nanofiltration membranes via both blending (BL) and preloading interfacial polymerization methods. Results show that the incorporation of MOFs could enhance water permeability of TFN membranes to 7.2 L/(m2·h·bar) at most ( TFNNH2-UiO-66-BL-0.10%), about 1.3 times of the corresponding thin-film composite membranes, without sacrificing their selectivity to reject NaCl (>40%) and xylose (>65%). Membrane characterization revealed that MOFs decreased the cross-linking degree while increasing the membrane thickness, surface negative charge, and roughness of the polyamide active layer. MIL-53(Al) were found to bind with polyamide via reacting with piperazine, whereas weaker polyamide-MOF interactions were observed for NH2-UiO-66 and ZIF-8. This difference, along with the hydrophilicity of MOF particles, explained the varied permselectivity of different TFN membranes. Compared to pristine polyamide membranes, the TFN membranes demonstrated higher or comparable efficiencies in removing a set of six pharmaceuticals (PhACs), which were determined by the molecular properties of PhACs and membrane structure. The findings of this study deepen our understanding of the roles that MOFs play in regulating membrane performance, promoting molecular design of MOF-incorporated TFN membranes via precise control of MOF-polymer interactions.
RESUMO
The direct photo-transformation of widely used antibiotics, including Tetracycline (TTC), chlortetracycline (CTC), sulfamethoxazole (SMX) and sulfamethazine (SMZ) were quantified for surface water by using artificial UV irradiation. The photolysis rate is directly proportional to the overlap between the absorption spectrum of the solution and the spectrum of the terrestrial sunlight. Increasing overlap fraction of Tetracycline (TC) group than Sulfanomide (Sulfa) group, the transformation of TC group is certified much faster than the sulfa group. The speciation of TC and Sulfa group antibiotics are pH-dependent and consequently influence its light adsorption spectrum. And the toxicity of the four target antibiotics along the photo-transformation was assessed. In field aquatic environment, a temporal- and spatial half-life model described the behavior of the antibiotics in water column of victoria harbour could be validated by using experimentally obtained quantum yield with the target field meteorological data. The modeling results indicated the photolysis rate of different kind of antibiotics varied differently along season, daily time and water depth. Summer, midday and surface layer of water body would be the time- and space-highlight spot in which the phototransformation are the dominant process for antibiotics concentration depletion. Seasonal variety would be enhanced for sulfa-group kind antibiotics, which having only tail overlapped with irradiation spectrum. Daily averaged half-lives of TC group were relatively stable, while the sulfa group antibiotics were found to vary from about 300 to 750â¯h, dependent on the seasonal change.
Assuntos
Sulfanilamidas/análise , Tetraciclina/análise , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Processos Fotoquímicos , Sulfanilamidas/química , Sulfanilamidas/toxicidade , Luz Solar , Tetraciclina/química , Tetraciclina/toxicidade , Raios Ultravioleta , Poluentes Químicos da Água/química , Poluentes Químicos da Água/toxicidadeRESUMO
A laboratory-scale submerged membrane bioreactor (SMBR) with a hollow-fibre membrane module was used to investigate membrane fouling under various operational conditions. The results showed that the sludge supernatant inside the SMBR had a consistently higher organic content than the MBR effluent. Detailed analysis revealed a pool of organic substances, classified as biopolymer clusters (BPC), in the SMBR system that were larger in size than the soluble microbial products (SMP). The BPC content in the MBR sludge mixture ranged from 0.7 to 18.8 mg/L in terms of the total organic carbon (TOC), with an average of 5.6+/-3.5mg/L, which was about twice the SMP concentration in the suspension. Under a fluorescent microscope and using DAPI staining, the BPC in the sludge supernatant after centrifugation were found to be particulate organic substances that were independent of the sludge flocs and had a size distribution up to 50 microm. The findings of the experiment suggest that BPC are an important foulant and have a profound effect on membrane fouling. The fouling rate in the reactor, as indicated by the increase in trans-membrane pressure (TMP), correlates to a certain extent with the BPC concentration in the sludge suspension under various conditions. It is argued that BPC are a special form of organic substances that are formed by the adsorption and affinity clustering of mainly SMP within the sludge layer deposited on the membrane surface. The BPC can be detached with the sludge from the membrane and returned to the suspension. The accumulation of BPC in the SMBR sludge mixture would facilitate the formation of a sludge fouling layer on the membrane surface, thus causing a serious fouling problem.
Assuntos
Biopolímeros/análise , Reatores Biológicos , Esgotos/análise , Substâncias Húmicas/análise , Membranas Artificiais , Polissacarídeos/análise , Proteínas/análise , Eliminação de Resíduos Líquidos/métodosRESUMO
A novel phosphorous (P) removal and recovery process using a membrane bioreactor (MBR) with ferric iron dosing and acidogenic co-fermentation was developed for municipal wastewater treatment. The very different solubility of Fe(III)-P and Fe(II)-P complex and the microbial transformation of Fe(III) to Fe(II) were utilized for P removal and recovery. By means of Fe-induced precipitation, chemical P removal was effectively achieved by an MBR with a flat-plate ceramic membrane; however, the Fe(III)-P solids accumulated in the MBR that constituted a significant fraction of the activated sludge. Anaerobic co-fermentation of the MBR sludge and food waste in a side-stream allowed the extraction of P and Fe from the sludge into the supernatant. The P in the supernatant was recovered as a fertilizer resource, while the sludge was returned to the MBR tank. The experimental results show that by adding FeCl3 at 20 mg Fe/L into the influent of domestic wastewater, about 95.6% of total P could be removed by the MBR. One fifth (20%) of the sludge in the MBR was circulated daily through the side-stream fermenters for co-fermentation with cooked rice as the model food waste. The sludge underwent acidogenesis and dissimilatory iron reduction, resulting in a drop of the pH to below 5.0 and reduction of Fe(III) to Fe(II). Owing to the high solubility of the Fe(II)-P complex, P and Fe were then dissolved and released from the sludge into the supernatant. By simply adjusting the solution pH to 8.0, the P and Fe(II) in the supernatant readily re-precipitated to form vivianite for the P recovery. Using the iron dosing MBR and side-stream sludge fermentation, an overall P recovery efficiency of 62.1% from wastewater influent can be achieved, and the problem of inorganic build-up in the MBR is effectively alleviated.
Assuntos
Reatores Biológicos , Fósforo/química , Fósforo/metabolismo , Poluentes Químicos da Água/química , Poluentes Químicos da Água/metabolismo , Fermentação , Compostos Ferrosos/química , Alimentos , Ferro/química , Membranas Artificiais , Fosfatos/química , Esgotos , Eliminação de Resíduos Líquidos/métodosRESUMO
A calcium hydroxide shell was coated onto the surface of micro-sized zero valent iron (mZVI) particles by hydrothermal approach in oversaturated Ca(OH)2 solution. The heterogeneous nucleation of nano-scale Ca(OH)2 particle on micro-scale spherical ZVI surface was clearly observed by scanning electronic microscope (SEM). The moderate solubility of Ca(OH)2 was demonstrated as the crucial factor in inducing slow nucleation rate and in facilitating the abundant growth of Ca(OH)2 nuclei on mZVI surface. The growth of shell thickness was found to obey the zero order kinetics with the rate constant at about 15nm/h. The Ca(OH)2 shell was demonstrated to be anticorrosive to protect reactive Fe0 from oxidation based on standard corrosion test. In addition, the instant aggregation process of mZVI within 120s was slowed down after Ca(OH)2 shell coating. The saturation magnetization of mZVI, measured by a vibrating sample magnetometer (VSM), was gradually diminished along with the shell formation with a 32% reduction after excluding the Fe0 content change effect. This indicated that Ca(OH)2 shell coating can partially eliminated particle-particle or cluster-cluster magnetic attraction force to enhance the dispersion stability and resultantly facilitate the transportation. The dissolution of Ca(OH)2 shell was greatly dependent on the pH value of the background water environment. The pH gradient change resulted from the Ca(OH)2 shell dissolution along mZVI particle transport was illustrated by a conceptual model.
RESUMO
Nano scale zero-valent iron (nZVI), a promising engineering technology for in situ remediation, has been greatly limited by quick self-corrosion and low mobility in porous media. Highly reactive nZVI particles produced from the borohydride reduction method were enclosed in a releasable Ca(OH)2 layer by the chemical deposition method. The amount of Ca(OH)2 coated on nZVI surface were well controlled by the precursor dosage. At moderate Ca(OH)2 dosage (RCa/TFeâ¯=â¯0.25) condition, the increment of Fe0 content for the obtained nZVI/Ca-0.25 sample was observed. The interfacial reactions between the iron oxide shell and the Ca(OH)2 saturated environment were delicately elucidated by the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) spectrum. And the coverage of Ca(OH)2 shell on spherical nZVI surface was found more complete and uniform for the nZVI/Ca sample obtained from the moderate precursor dosage condition (RCa/TFeâ¯=â¯0.25). The Ca(OH)2 shell before dissolution was demonstrated owning the anti-corrosion capability to slow down the oxidation of Fe0 core in air, during ethanol storage and in aqueous environment. The mechanism of anti-corrosion capability for nZVI/Ca-0.25 particle was interestingly found to be attributed to the Ca(OH)2 shell isolation and also be potentially due to the iron oxide shell phase transformation mediated by the outer Ca(OH)2 shell. An improved trichloroethylene reduction performance was observed for nZVI/Ca-0.25 than bare nZVI. The mobility of nZVI/Ca particles in water-saturated porous media was moderately improved before shell dissolution.
Assuntos
Hidróxido de Cálcio/química , Recuperação e Remediação Ambiental/métodos , Ferro/química , Água/química , OxirreduçãoRESUMO
Adsorption of trace organic compounds (TrOCs) onto the membrane materials has a great impact on their rejection by nanofiltration (NF) and reverse osmosis (RO) membranes. This study aimed to investigate the difference in adsorption of various pharmaceuticals (PhACs) onto different NF/RO membranes and to demonstrate the necessity of isolating the polyamide (PA) active layer from the polysulfone (PS) support layer for adsorption characterization and quantification. Both the isolated PA layers and the PA+PS layers of NF90 and ESPA1 membranes were used to conduct static adsorption tests. Results showed that apparent differences existed between the PA layer and the PA+PS layer in the adsorption capacity of PhACs as well as the time necessary to reach the adsorption equilibrium. PhACs with different physicochemical properties could be adsorbed to different extents by the isolated PA layer, which was mainly attributed to electrostatic attraction/repulsion and hydrophobic interactions. The PA layer of ESPA1 exhibited apparently higher adsorption capacities for the positively charged PhACs and similar adsorption capacities for the neutral PhACs although it had significantly less total interfacial area (per unit membrane surface area) for adsorption compared to the PA layer of NF90. The higher affinity of the PA layer of ESPA1 for the PhACs could be due to its higher capacity of forming hydrogen bonds with PhACs resulted from the modified chemistry with more -OH groups. This study provides a novel approach to determining the TrOC adsorption onto the active layer of membranes for the ease of investigating adsorption mechanisms.
Assuntos
Poluentes Ambientais/química , Filtração/métodos , Membranas Artificiais , Nylons/química , Osmose , Preparações Farmacêuticas/química , Adsorção , Poluentes Ambientais/isolamento & purificação , Interações Hidrofóbicas e Hidrofílicas , Nanotecnologia , Preparações Farmacêuticas/isolamento & purificação , Polímeros/química , Sulfonas/químicaRESUMO
This study was conducted in order to obtain a better understanding of the combined fouling by biopolymers coexisting with inorganic particles from the aspects of fouling index, fouling layer structure and biopolymer-particle interactions. Calcium alginate was used as the model biopolymer and Fe2O3, Al2O3, kaolin, and SiO2 were used as model inorganic particles. Results showed that the combined fouling differed greatly among the four types of inorganic particles. The differences were attributed particularly to the different adsorption capacities for calcium alginate by the particles with this capacity decreasing in the order of Fe2O3, Al2O3, kaolin and SiO2. Particle size measurement and electron microscopic observation indicated the formation of agglomerates between calcium alginate and those inorganic particles exhibiting strong adsorption capacity. A structure was proposed for the combined fouling layer comprised of a backbone cake layer of alginate-inorganic particle agglomerates with the pores partially filled with discontinuous calcium alginate gels. The filterability of the fouling layer was primarily determined by the abundance of the gels. The strength of physical interaction between calcium alginate and each type of inorganic particle was calculated from the respective surface energies and zeta potentials. Calculation results showed that the extent of physical interaction increased in the order of Al2O3, Fe2O3, kaolin and SiO2, with this order differing from that of adsorption capacity. Chemical interactions may also play an important role in the adsorption of alginate and the consequent combined fouling. High-resolution XPS scans revealed a slight shift of electron binding energies when alginate was adsorbed.
Assuntos
Adsorção , Alginatos/química , Biopolímeros/química , Membranas Artificiais , Modelos Químicos , Compostos Férricos , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Tamanho da Partícula , Purificação da Água/métodosRESUMO
Many nitrogen-heterocyclic compounds (NHCs) are toxic and recalcitrant contaminants that need to be degraded by advanced oxidation processes. In this study, quinoline, isoquinoline and indole were selected to investigate their toxicity patterns during the degradation by O(3)/UV. It was found that for all the three NHCs there was some H(2)O(2) formed in the degradation process, which caused the sharp increase of toxicity to Photobacterium phosphoreum. The toxicity decreasing patterns after H(2)O(2) elimination were different for quinoline (or isoquinoline) and indole. After H(2)O(2) elimination, for quinoline or isoquinoline the toxicity decreased concurrently with the decrease of its concentration, while for indole the toxicity lagged behind its removal rate. The rate constant of the NHC with O(3) (k(D)) was the decisive parameter of its toxicity pattern because of its critical role in determining the degradation rate of the NHC. Two quantitative structure-activity relationship equations for the k(D) values of simple NHCs and homocyclic aromatics were successfully established, which would be useful to predict their toxicity patterns.