Smoothing the Phosphorus Resource Stress under the Socioeconomic Development in China.

Phosphorus (P) is the key in maintaining food security and ecosystem functions. Population growth and economic development have increased the demand for phosphate rocks. China has gradually developed from zero phosphate mining to the world's leading P miner, fertilizer, and agricultural producer since 1949. China released policies, such as designating phosphate rock as a strategic resource, promoting eco-agricultural policies, and encouraging the use of solid wastes produced in mining and the phosphorus chemical industry as construction materials. However, methodological and data gaps remain in the mapping of the long-term effects of policies on P resource efficiency. Here, P resource efficiency can be represented by the potential of the P cycle to concentrate or dilute P as assessed by substance flow analysis (SFA) complemented by statistical entropy analysis (SEA). P-flow quantification over the past 70 years in China revealed that both resource utilization and waste generation peaked around 2015, with 20 and 11 Mt of mined and wasted P, respectively. Additionally, rapidly increasing aquaculture wastewater has exacerbated pollution. The resource efficiency of the Chinese P cycle showed a U-shaped change with an overall improvement of 22.7%, except for a temporary trough in 1975. The driving force behind the efficiency decline was the roaring phosphate fertilizer industry, as confirmed by the sharp increase in P flows for both resource utilization and waste generation from the mid-1960s to 1975. The positive driving forces behind the 30.7% efficiency increase from 1975 to 2018 were the implementation of the resource conservation policy, downstream pollution control, and, especially, the circular agro-food system strategy. However, not all current management practices improve the P resource efficiency. Mixing P industry waste with construction materials and the development of aquaculture to complement offshore fisheries erode P resource efficiency by 2.12% and 9.19%, respectively. With the promotion of a zero-waste society in China, effective P-cycle management is expected.

Nitrogen fate in riparian zones: Insights from experiments and analysis of sediment porosity and surface water-groundwater exchange.

Riparian zones play a vital role in the river ecosystem. Solutes in vertical riparian zones are transported being by alternating hydraulic gradients between river water and groundwater, due to natural or human activities. This study investigates the impacts of porous sediments and alternating rate of surface water-groundwater on nitrogen removal in the riparian zone through experiments based on the field sampled. The experimental results, combined with dimensionless numbers (Péclet and Damköhler) and Partial Least Squares-Path Modeling, analyze the nitrogen fate responding to hydrodynamics changes. The results show that increased sediment porosity contributes to the ammonium removal, particularly when the oxygen content of river water is low, with the removal rate up to 72.57%. High ammonium content and dissolved organic carbon (DOC) in rural rivers lead to a constant low-oxygen condition (4 mg/L) during surface water-groundwater alternation, and promote denitrification. This threatens groundwater with ammonium pollution and causes accumulation at the top of vertical riparian zones during upwelling, potentially causing secondary river pollution. However, increasing the alternating rate hinders the nitrate denitrification and drastically changes in the redox environment of the riparian zone, despite contributing to ammonium removal. Rapid oxygen consumption during aerobic metabolism and nitrification in groundwater-surface water exchange created favorable conditions for denitrification. Floodplains sediment porosity is unfavorable for nitrification. This study improves understanding of coupled hydrologic and solute processes in vertical riparian zones, informing strategies for optimizing nitrogen attenuation and riparian zone construction.

Prospective Life Cycle Assessment for the Electrochemical Oxidation Wastewater Treatment Process: From Laboratory to Industrial Scale.

Electrochemical oxidation (EO) is a promising technology for water purification, but indirect environmental burdens may arise in association with consumption of materials and energy during electrode preparation and process operation. This study evaluated the life cycle environmental impacts of emerging EO technology from laboratory scale to industrial scale using prospective life cycle assessment (LCA) on a quantitative basis. Environmental impacts of EO technology were assessed at laboratory scale by comparing three representative anode materials (SnO2, PbO2, and boron-doped diamond) and other two typical processes (adsorption and Fenton method), which verified the competitiveness of the EO process and identified the key factors to environmental hotspots. Thereafter, LCA of scale-up EO was performed to offer guidance for practical application, and the life cycle inventory was compiled upon thermodynamic and kinetic simulations, empirical calculation rules, and similar technical information. Results demonstrated EO to be effective for destructing recalcitrant organic pollutants, but visible direct benefits might be outweighed by increased indirect environmental burdens associated with the preparation of anode materials, use of electrolytes, and energy consumption during the operation stage at both laboratory scale and larger scale. This necessitated attention to overall life cycle profiles by taking into account reactor design, anode materials, electrolyte and flow pattern, and decentralized location with a large share of renewable power station and rigorous contamination control strategies for wastewater treatment plants.

Improved Machine Learning Models by Data Processing for Predicting Life-Cycle Environmental Impacts of Chemicals.

Machine learning (ML) provides an efficient manner for rapid prediction of the life-cycle environmental impacts of chemicals, but challenges remain due to low prediction accuracy and poor interpretability of the models. To address these issues, we focused on data processing by using a mutual information-permutation importance (MI-PI) feature selection method to filter out irrelevant molecular descriptors from the input data, which improved the model interpretability by preserving the physicochemical meanings of original molecular descriptors without generation of new variables. We also applied a weighted Euclidean distance method to mine the data most relevant to the predicted targets by quantifying the contribution of each feature, thereby the prediction accuracy was improved. On the basis of above data processing, we developed artificial neural network (ANN) models for predicting the life-cycle environmental impacts of chemicals with R2 values of 0.81, 0.81, 0.84, 0.75, 0.73, and 0.86 for global warming, human health, metal depletion, freshwater ecotoxicity, particulate matter formation, and terrestrial acidification, respectively. The ML models were interpreted using the Shapley additive explanation method by quantifying the contribution of each input molecular descriptor to environmental impact categories. This work suggests that the combination of feature selection by MI-PI and source data selection based on weighted Euclidean distance has a promising potential to improve the accuracy and interpretability of the models for predicting the life-cycle environmental impacts of chemicals.

Enhanced removal of heavy metals and phosphate in stormwater filtration systems amended with drinking water treatment residual-based granules.

To address the clogging issues in stormwater filtration systems, a drinking water treatment residual (DWTR)-based granule (DBG) substrate was developed herein by pyrolyzing and granulating the DWTR with bentonite and corncob. Toxicity characteristic leaching procedure studies indicated that fabricating into DBG stabilized the Al and heavy metals in DWTR and restrained the leaching risk. Then the removal performance of phosphate (PO4-P) and heavy metal ions by the DWTR and DBG was evaluated in batch and laboratory-scale column experiments. Results from batch tests showed that the amount of Pb(Ⅱ) adsorbed by DBG (18.47 ± 0.56 mg g⁻1) was approximately 2.3 times of that adsorbed by DWTR (8.05 ± 0.19 mg g⁻1), whereas the PO4-P adsorption capacity of DBG (8.63 ± 0.24 mg g⁻1) was much lower than that of DWTR (25.33 ± 0.81 mg g⁻1). This could be ascribed to the addition of corncob and bentonite (at a mass ratio of 20% and 40% in DBG, respectively), which provided extremely high cation exchange capacity for the Pb(Ⅱ) adsorption, while no effective PO4-P adsorption component was involved. Moreover, the pyrolysis process could improve the Pb(Ⅱ) and PO4-P adsorption capacity of the raw-mixture by 42% and 7%, whereas granulation process decreased those of the pyrolysis-mixture by 15% and 20%, respectively, owing to the reduction of accessible surface area in the DBG. Under various stormwater runoff conditions, the involvement of DBG in stormwater filtration systems exerted consistently fancy performance of Cu(Ⅱ), Pb(Ⅱ), Cd(Ⅱ) and PO4-P removal, with average removal rates of over 86.20% and desorption rates of less than 3.50%, indicating irreversible and strong complexion between the contaminants and DBG. The DBG column manifested good permeability and stable hydraulic conductivity (2.74-2.52 m d⁻1) over a 54-day rainfall period, which was beneficial to address the clogging issue of DWTR. Overall, this study provides an alternative pathway to enhance the hydraulic condition and treatment performance of the stormwater filtration systems for urban runoff management.

Phosphorus flow analysis in the maize based food-feed-energy systems in China.

Phosphorus (P) is an essential and limiting nutrient for agricultural systems, where the demand for agricultural products such as food, feed, and bio-fuel are the major drivers of the intensification of agricultural production systems. Globally, maize is one of three main cereal crops, a main feedstock for animal production and a substrate for the production of bio-ethanol. This study investigated P flows through the multiple utilization systems of maize (as represented by the subsystems of food, feed and energy production) at a crop level of 2016 as reference year and made future predictions of P flows for the year 2030 based on different scenarios for food-feed-energy systems in China. For 2016, the subsystem of animal production resulted in the highest waste of P due to inappropriate manure management, but the subsystem of value-added products (Bio-fuel production, distillers dried grains with solubles (DDGS), maize-oil) showed the lowest P use efficiency (39%). From the value-added subsystem, 17% of P from the process flow to the subsystem of animal production as DDGS, and 61% of P is wasted associated with wastewater and sludge. Future scenarios of structural adjustments in the maize consumption system predict that the supply of maize for animal feed will be threatened if the policy of the Biofuel National Promotion before 2020 is fully implemented in China, as current maize production will not meet the future demand of food, feed and energy simultaneously. The results emphasized the use of P waste resources and better sludge management from a systems perspective. This also implied the importance of exploring coordinated development and integrated strategies for sustainable P flow management in multiple utilization systems.

Volume reduction and water reclamation of reverse osmosis concentrate from coal chemical industry by forward osmosis with an osmotic backwash strategy.

Coal chemical industry (CCI) generally utilizes reverse osmosis (RO) for water reclamation, which generates a highly concentrated stream containing refractory organic substances and high-concentration total dissolved solids (TDS). To address this issue, the present work focuses on volume reduction of RO concentrate (ROC) produced from CCI by forward osmosis (FO). We investigated the effects of membrane orientation and draw solution (DS) concentration on FO performance. Foulant removal was tested by using chemical cleaning, physical cleaning and osmotic backwash (OB). AL-FS (active layer facing feed solution) mode outcompeted AL-DS (active layer facing draw solution) mode, achieving a flux of 26.4 LMH, 92.5% water reclamation and energy consumption of 0.050 kWh·m-3 with 4 M NaCl as DS. The FO process was able to reject >98% SO4 2-, Mg2+and Ca2+, 92-98% Si and 33-55% total organic carbon (TOC). Ten-cycle (10 × 20 h) accelerated fouling test demonstrated approximately 30% flux decline in association with Si-containing foulants, which could be removed almost completely through OB with 97.1% flux recovery. This study provides a proof-of-concept demonstration of FO for volume reduction and water reclamation of ROC produced from CCI, making the treatment of ROC more efficient and more energy effective.

Pilot-scale bioelectrochemical system for efficient conversion of 4-chloronitrobenzene.

4-Chloronitrobenzene (4-CNB) is one of the highly toxic contaminants that may lead to acute, chronic or persistent physiological toxicity to ecology and environment. Conventional methods for removing 4-CNB from aquatic environment may be problematic due to inefficiency, high cost and low sustainability. This study develops a pilot-scale bioelectrochemical system (BES, effective volume of 18 L) and examines its performance of bioelectrochemical transformation of 4-CNB to 4-chloroaniline (4-CAN) under continuous operation. The results demonstrate that the initial 4-CNB concentration in the influent and hydraulic retention time (HRT) has a significant impact on 4-CNB reduction and 4-CAN formation. Compared with the conventional anaerobic process in the absence of external power supplied, the 4-CNB conversion efficiency can be enhanced with power supplied due to microbial-mediated electron transfer at the negative cathode potential. At a voltage of 0.4 V and HRT of 48 h, the 4-CNB reduction and 4-CAN formation efficiency reached 99% and 94.1%, respectively. Based on a small external voltage applied, the pilot-scale BES is effective in the conversion of 4-CNB to 4-CAN, an intermediate that is of less toxicity and higher bioavailability for subsequent treatment. This study provides a new strategy and methods for eliminating 4-CNB, making wastewater treatment more economical and more sustainable.

A case study of aggregation behaviors of titanium dioxide nanoparticles in the presence of dodecylbenzene sulfonate in natural water.

The present work aims to ascertain the mechanisms of surfactant (dodecylbenzene sulfonate; DBS) effects on the aggregation behaviors of TiO2 nanoparticles (TiO2-NPs) in natural water samples. Aggregation experiments were conducted at a TiO2-NPs concentration of 10mg/L in deionized water and in natural water samples via dynamic light scattering and Zeta potential determination. Average attachment efficiency was calculated to compare the aggregation behaviors of nanoparticles in the two aqueous media. Results showed that the effects of DBS on aggregation could be interpreted by both Derjaguin-Landau-Verwey-Overbeek (DLVO) and non-DLVO mechanisms. In natural water samples, aggregation did not occur rapidly and was able to develop slowly under all conditions, and the roles of DBS were obvious at high DBS concentration owing to the impacts of inherent components of natural water samples, such as colloids and natural organic compounds. Future aggregation studies should concentrate on multi-factor, multi-colloidal and dynamic aspects under similar environmental conditions.

[N2O Emission Factors from Wastewater Treatment Plants Based on Literature Statistics and Model Fitting].

The emission of nitrous oxide （N2O） during wastewater treatment cannot be ignored. The analysis of statistical data from literature based on 126 empirical studies revealed that the geographical factors of wastewater treatment plants （WWTPs） had a significant impact on N2O emission factors. However, the N2O emission factors of WWTPs in all regions of the world were generally lower than the Intergovernmental Panel on Climate Change （IPCC） recommended values. In China, the N2O emission factors （in N2O-N/Ninfluent） of WWTPs were approximately 0.000 35-0.065 20 kg·kg-1. Meanwhile, the N2O emission factors of different wastewater treatment processes were also significantly different, especially since the sequencing batch reactor （SBR） process had higher emissions. The use of uniform default emission factors for accounting was prone to overestimate N2O emissions, and it is recommended that countries conduct actual monitoring or modeling studies to develop categorical emission factors suitable for local conditions. In addition, the N2O emission factor based on total nitrogen （TN） removal was weakly negatively correlated with TN removal in 126 empirical data, which was more in line with bioprocessing stoichiometry and could provide an accurate accounting method for N2O. To this end, a digital twin model was developed to dynamically simulate a case anaerobic-anoxic-aerobic （AAO） WWTP to comprehensively quantify the dynamic emission behavior of N2O, which demonstrated that N2O emissions had significant seasonal and daily variability and were only equivalent to 11% of the calculated value of the emission factor based on the IPCC recommendation. Comparing the scatter linear fitting and categorical mean exponential fitting methods, it was found that the latter could more accurately reflect the negative correlation between the N2O emission factors and the TN removal rate, and an exponential regression equation between the average N2O emission factor based on the amount of TN removed and the TN removal rate was further developed to predict the N2O emission. The dynamic simulation and categorical index fitting methods provided in this study are important references for the accurate accounting of N2O emissions in similar WWTPs and provide help for understanding and responding to the N2O emission problems.

SIRT3 sulfhydration using hydrogen sulfide inhibited angiotensin II-induced atrial fibrosis and vulnerability to atrial fibrillation via suppression of the TGF-ß1/smad2/3 signalling pathway.

Atrial fibrosis is associated with the occurrence of atrial fibrillation (AF) and regulated by the transforming growth factor-ß1 (TGF-ß1)/Smad2/3 signalling pathway. Unfortunately, the mechanisms of regulation of TGF-ß1/Smad2/3-induced atrial fibrosis and vulnerability to AF remain still unknown. Previous studies have shown that sirtuin3 (SIRT3) sulfhydration has strong anti-fibrotic effects. We hypothesised that SIRT3 sulfhydration inhibits angiotensin II (Ang-II)-induced atrial fibrosis via blocking the TGF-ß1/Smad2/3 signalling pathway. In this study, we found that SIRT3 expression was decreased in the left atrium of patients with AF compared to that in those with sinus rhythm (SR). In vitro, SIRT3 knockdown by small interfering RNA significantly expanded Ang-II-induced atrial fibrosis and TGF-ß1/Smad2/3 signalling pathway activation, whereas supplementation with Sodium Hydrosulfide (NaHS, exogenous hydrogen sulfide donor and sulfhydration agonist) and SIRT3 overexpression using adenovirus ameliorated Ang-II-induced atrial fibrosis. Moreover, we observed suppression of the TGF-ß1/Smad2/3 pathway when Ang-II was combined with NaHS treatment, and the effect of this co-treatment was consistent with that of Ang-II combined with LY3200882 (Smad pathway inhibitor) on reducing atrial fibroblast proliferation and cell migration in vitro. Supplementation with dithiothreitol (DTT, a sulfhydration inhibitor) and adenovirus SIRT3 shRNA blocked the ameliorating effect of NaHS and AngII co-treatment on atrial fibrosis in vitro. Finally, continued treatment with NaHS in rats ameliorated atrial fibrosis and remodelling, and further improved AF vulnerability induced by Ang-II, which was reversed by DTT and adenovirus SIRT3 shRNA, suggesting that SIRT3 sulfhydration might be a potential therapeutic target in atrial fibrosis and AF.

High-Salt Diet Inhibits the Expression of Bmal1 and Promotes Atrial Fibrosis and Vulnerability to Atrial Fibrillation in Dahl Salt-Sensitive Rats.

BACKGROUND: Hypertension is a risk factor for atrial fibrillation (AF), and brain and muscle arnt-like protein 1 (Bmal1) regulate circadian blood pressure and is implicated in several fibrotic disorders. Our hypothesis that Bmal1 inhibits atrial fibrosis and susceptibility to AF in salt-sensitive hypertension (SSHT) and our study provides a new target for the pathogenesis of AF induced by hypertension. METHODS: The study involved 7-week-old male Dahl salt-sensitive that were fed either a high-salt diet (8% NaCl; DSH group) or a normal diet (0.3% NaCl; DSN group). An experimental model was used to measure systolic blood pressure (SBP), left atrial ejection fraction (LAEF), left atrial end-volume index (LAEVI), left atrial index (LAFI), AF inducibility, AF duration, and atrial fibrosis pathological examination and the expression of Baml1 and fibrosis-related proteins (TNF-α and α-SMA) in left atrial tissue. RESULTS: DSH increased TNF-α and α-SMA expression in atrial tissue, level of SBP and LAESVI, atrial fibrosis, AF induction rate, and AF duration, and decreased Bmal1 expression in atrial tissue, the circadian rhythm of hypertension, and level of LAEF and LAFI. Our results also showed that the degree of atrial fibrosis was negatively correlated with Bmal1 expression, but positively correlated with the expression of TNF-α and α-SMA. CONCLUSIONS: We demonstrated that a high-salt diet leads to circadian changes in hypertension due to a reduction of Bmal1 expression, which plays a crucial role in atrial fibrosis and increased susceptibility to AF in SSHT rats.

SIRT3/AMPK signaling pathway regulates lipid metabolism and improves vulnerability to atrial fibrillation in Dahl salt sensitive rats.

BACKGROUND: Hypertension may result in atrial fibrillation (AF) and lipid metabolism disorders. The Sirtuins3 (SIRT3) / AMP-activated protein kinase (AMPK) signaling pathway has the capacity to regulate lipid metabolism disorders and the onset of AF. We hypothesize that the SIRT3/AMPK signaling pathway suppresses lipid metabolism disorders, thereby mitigating salt-sensitive hypertension (SSHT)-induced susceptibility to AF. METHODS: The study involved 7-week-old male Dahl salt-sensitive that were fed either high-salt diet (8% NaCl; DSH group) or normal diet (0.3% NaCl; DSN group). Then DSH group were administered either oral metformin (MET, an AMPK agonist) or intraperitoneal injection of Honokiol (HK, a SIRT3 agonist). This experimental model allowed for the measurement of SBP, the expression levels of lipid metabolism-related biomarker, pathological examination of atrial fibrosis and lipid accumulation, as well as AF inducibility and AF duration. RESULTS: DSH decrease SIRT3, phosphorylation-AMPK and VLCAD expression, increased FASN and FABP4 expression and concentrations of FFA and TG, atrial fibrosis and lipid accumulation in atrial tissue, enhanced level of SBP, promoted AF induction rate and prolonged AF duration, which are blocked by MET and HK. Our results also showed that the degree of atrial fibrosis was negatively correlated with VLCAD expression, but positively correlated with the expression of FASN and FABP4. CONCLUSIONS: We have confirmed that high-salt diet can result in hypertension, associated atrial tissue lipid metabolism dysfunction. This condition is linked to the inhibition of the SIRT3/AMPK signaling pathway, which plays a significant role in the progression of susceptibility to AF in SSHT rats.

Forward osmosis with a novel thin-film inorganic membrane.

Forward osmosis (FO) represents a new promising membrane technology for liquid separation driven by the osmotic pressure of aqueous solution. Organic polymeric FO membranes are subject to severe internal concentration polarization due to asymmetric membrane structure, and low stability due to inherent chemical composition. To address these limitations, this study focuses on the development of a new kind of thin-film inorganic (TFI) membrane made of microporous silica xerogels immobilized onto a stainless steel mesh (SSM) substrate. The FO performances of the TFI membrane were evaluated upon a lab-scale cell-type FO reactor using deionized water as feed solution and sodium chloride (NaCl) as draw solution. The results demonstrated that the TFI membrane could achieve transmembrane water flux of 60.3 L m(-2) h(-1) driven by 2.0 mol L(-1) NaCl draw solution at ambient temperature. Meanwhile, its specific solute flux, i.e. the solute flux normalized by the water flux (0.19 g L(-1)), was 58.7% lower than that obained for a commercial cellulose triacetate (CTA) membrane (0.46 g L(-1)). The quasi-symmetry thin-film microporous structure of the silica membrane is responsible for low-level internal concentration polarization, and thus enhanced water flux during FO process. Moreover, the TFI membrne demonstrated a substantially improved stability in terms of mechanical strength, and resistance to thermal and chemical stimulation. This study not only provides a new method for fabricating quasi-symmetry thin-film inorganic silica membrane, but also suggests an effective strategy using this alternative membrane to achieve improved FO performances for scale-up applications.

Exploration of the nitrogen contamination from sewers exfiltration to the unsaturated zone by modeling.

Numerous elements, such as the degree of sewer degeneration, hydraulics, and geological conditions, influence the extent to which sewage pollutes the unsaturated zones of urban. The present study discussed the influence of sewer exfiltration on the urban unsaturated zone, using nitrogen from domestic sewage as a representative contaminant in combination with experiments, literature studies, modeling and sensitivity analysis. The study shows that soils with high sand content exhibit high permeability and strong nitrification capacity, and groundwater is more susceptible to contamination with nitrate. In contrast, the nitrogen in the clay texture or wet soils has short migration distances and a weak nitrification capacity. However, under such conditions, the accumulation of nitrogen can last for more than 10 years, and there is a possible threat of groundwater contamination due to the detection difficulty. The presence of sewer exfiltration and the damage degree of a sewer can be determined by the ammonium concentration at 1-2 m near the pipe or nitrate above the water table. The sensitivity analysis revealed that all parameters impact the nitrogen concentration in the unsaturated zone to varying degrees, four of which are the primary parameters: defect area, exfiltration flux, saturated water content and first-order response constant. In addition, changes in environmental conditions significantly influence the boundaries of the pollution plume, especially the horizontal. The research data collected in this paper will not only allow for a rigorous assessment of the study scenarios but will also provide data support for other researchers.

Integrated urban water management by coupling iron salt production and application with biogas upgrading.

Integrated urban water management is a well-accepted concept for managing urban water. It requires efficient and integrated technological solutions that enable system-wide gains via a whole-of-system approach. Here, we create a solid link between the manufacturing of an iron salt, its application in an urban water system, and high-quality bioenergy recovery from wastewater. An iron-oxidising electrochemical cell is used to remove CO2 (also H2S and NH3) from biogas, thus achieving biogas upgrading, and simultaneously producing FeCO3. The subsequent dose of the electrochemically produced FeCO3 to wastewater and sludge removes sulfide and phosphate, and enhances sludge settleability and dewaterability, with comparable or superior performance compared to the imported and hazardous iron salts it substitutes (FeCl2, and FeCl3). The process enables water utilities to establish a self-reliant and more secure supply chain to meet its demand for iron salts, at lower economic and environmental costs, and simultaneously achieve recovery of high-quality bioenergy.

Towards the carbon neutrality of sludge treatment and disposal in China: A nationwide analysis based on life cycle assessment and scenario discovery.

Motivated by the carbon neutrality target, strategic planning for a low-carbon transition of sludge treatment and disposal in China is challenging due to the unpredictability of technical, regional, socioeconomic, and political factors affecting greenhouse gas (GHG) emissions. This study combines the use of a Life Cycle Assessment and the Patient Rule Induction Method, accounting for possibilities that could achieve net-zero carbon emissions by exploring multiple plausible future profiles of sludge treatment and disposal. Results show that reducing sludge landfill and increasing anaerobic digestion are effective methods to facilitate GHG reduction. Achieving carbon neutrality is closely linked to developing a cleaner electricity mix. Based on a cascaded scenario analysis considering regional differences for 31 Chinese provinces, results demonstrated a maximum cumulative reduction potential of 371 Mt CO2 equivalents from 2020 to 2050, equal to 59.84% of the business-as-usual scenario. Together with GHG reductions, terrestrial acidification and ecotoxicity as well as freshwater ecotoxicity are synergistically reduced. However, the shifting environmental burden results in freshwater eutrophication, human toxicity, marine ecotoxicity, marine eutrophication, and photochemical oxidant formation. This study presents a novel method for systematically identifying possible future development paths toward carbon neutrality. The findings may support policy designs for achieving target carbon reduction effects for sludge disposal.

Wastewater post-coagulation sludge recycled as a multifunctional adsorbent via pyrolysis enhanced in carbon dioxide (CO2).

Massive wastewater post-coagulation sludge (WPCS) generated from the tertiary treatment facilities has been regarded as an environmentally burdensome waste. Herein, to take advantage of the abundant amounts of Al/Fe (hydr)oxides, the WPCS was converted into functional char via pyrolysis under CO2 and N2 atmosphere. The higher organic matter content and porous structure of WPCS than drinking water treatment sludge made it a more suitable precursor for biochar and adsorbent production. CO2 expedited the thermolysis of the organics in WPCS and the Fe (hydr)oxides in WPCS further decreased the temperature of CO2-mediated reaction. Therefore, the corresponding products outcompeted the chars in N2, achieving ∼37% higher specific surface area, stronger aromaticity and more amorphous Al and Fe contents of 201.19 ± 2.25 and 27.03 ± 0.56 mg g-1, accompanied by more loss of surface functional groups like carboxyl and hydroxyl. Accordingly, WPCS chars under CO2 showed superior performance for removing phosphate (15.58 ± 0.19 mg g-1), along with the adsorption of heavy metal (37.17 ± 1.25 mg g-1 of Pb (II)) and dye (14.45 ± 0.11 mg g-1 of methylene blue). In sum, this study proposes a win-win strategy to convert coagulation sludges into resources and a new candidate for multifunctional adsorbent production.

Carbon neutrality of wastewater treatment - A systematic concept beyond the plant boundary.

Recently, every industry has been working to achieve carbon neutrality, and the wastewater sector is no exception. However, little research focuses on the carbon accounting of wastewater treatment and the roadmap to carbon neutrality. Here, to systematically perform accounting, we provide a sketch that describes three boundaries of the wastewater system and propose that the carbon neutrality of the wastewater system is far beyond the plant boundary. Moreover, we identify the direct and indirect carbon emissions of wastewater treatment. In addition to direct emissions of CH4 and N2O, direct fossil CO2 emissions from wastewater treatment should be included in accounting to set accurate guidelines. Next, the technologies that assist in achieving carbon-neutral wastewater treatment both within-the-fence of wastewater treatment plants and beyond the plant boundary are summarized. All measurements of energy recovery, resource recovery, and water reuse contribute to reaching this goal. The concepts of energy neutrality and carbon neutrality are identified. Successful wastewater treatment cases in energy self-sufficiency may not achieve carbon neutrality. Meanwhile, resource recovery methods are encouraged, especially to produce carbon-based materials. Ultimately, the trend of preference for the decentralized sewage treatment system is pinpointed, and systematic thinking to set the urban infrastructure layout as a whole is advocated.

The trade-off between N2O emission and energy saving through aeration control based on dynamic simulation of full-scale WWTP.

This study investigated the trade-off between energy saving and N2O emission reduction of WWTP under the precise control of dissolved oxygen (DO) concentration through model simulation. A long-term dynamic model for full-scale WWTP GHG emissions was established and calibrated with monitored year-round hourly water quality data to quantify the annual GHG emissions from WWTP. Results showed that N2O dominated the direct emission, up to 76.1%, and the variability of N2O generation could better be revealed by dynamic simulation. Furthermore, GHG emissions of the WWTP were mainly contributed by electric energy, among which the blower consumes the most electricity. To reduce the electricity consumption of blowers, improve mechanical efficiency and reduce DO concentration should be considered. DO setting played a significant role in the N2O and CH4 emission, electricity consumption and effluent quality, which was challenging to balance. The ultralow-oxygen (0-1/0.2-1 mg/L) and low oxygen (1-2 mg/L) control strategies were proposed, and their effects on total GHG emissions and effluent water quality were discussed. If the anaerobic environment (DO<0.2 mg/L)could be avoided, the control frequency (high and low) of the DO set-point did not have a significant effect on the emissions of N2O and CH4 and the effluent quality. The ultralow-oxygen strategy (0.2-1 mg/L) with a high-frequency control strategy achieved the lowest GHG emissions under the current energy mix. However, by 2050, as the energy supply gets cleaner, the total GHG emissions of WWTPs with ultralow-oxygen aeration (0.2-1 mg/L) will exceed low-oxygen aeration by 3.6%-4.2%, as N2O dominates 61.6%. Therefore, considering the trade-off between N2O emission and energy saving in WWTP, ultralow-oxygen aeration is a transition scheme to cleaner energy.