RESUMO
Currently, efficient and cost-effective recycling of waste capacitors is a pressing issue. In this study, the recovery of electrode powder from waste supercapacitors and enabling the reuse of the prepared samples are reported. The recovered powder is directly activated by mixing it with KOH using chemical activation to regenerate the waste-activated carbon. The regenerated activated carbon's specific surface area could be restored to a level similar to that of the original commercial powder, reaching 1803.15 m2/g. The regenerated activated carbon has a high proportion of microporous, which played a crucial role in its electrochemical performance. The samples' capacity in the organic system reached 125.96 F/g at 0.2 A/g and 111.77 F/g at 20 A/g, with a retention rate of 88.74%. Furthermore, the capacitance was maintained at 91.18% after 10,000 cycles, showing good cycling performance. Additionally, the supercapacitor assembled from the regenerated activated carbon delivered a high energy density of 31.83 Wh/kg and a power density of 269.76 W/kg, indicating great application potential. Overall, this study offers a useful and low-cost approach for recycling activated carbon from waste electrodes, which would be possible for supercapacitors recycling.
Assuntos
Carvão Vegetal , Reciclagem , Capacitância Elétrica , Eletrodos , PósRESUMO
Solid polymer electrolytes are of rapidly increasing importance for the research and development of future safe batteries with high energy density. The diversified chemistry and structures of polymers allow the utilization of a wide range of soft structures for all-polymer solid-state electrolytes. With equal importance is the hybrid solid-state electrolytes consisting of both "soft" polymeric structure and "hard" inorganic nanofillers. The recent emergence of the re-discovery of many two-dimensional layered materials has stimulated the booming of advanced research in energy storage fields, such as batteries, supercapacitors, and fuel cells. Of special interest is the mass transport properties of these 2D nanostructures for water, gas, or ions. This review aims at the current progress and prospective development of hybrid polymer-inorganic solid electrolytes based on important 2D materials, including natural clay and synthetic lamellar structures. The ion conduction mechanism and the fabrication, property and device performance of these hybrid solid electrolytes will be discussed.
RESUMO
The electrochemical performance of the aluminum-sulfur (Al-S) battery has very poor reversibility and a low charge/discharge current density owing to slow kinetic processes determined by an inevitable dissociation reaction from Al2 Cl7- to free Al3+ . Al2 Cl6 Br- was used instead of Al2 Cl7- as the dissociation reaction reagent. A 15-fold faster reaction rate of Al2 Cl6 Br- dissociation than that of Al2 Cl7- was confirmed by density function theory calculations and the Arrhenius equation. This accelerated dissociation reaction was experimentally verified by the increase of exchange current density during Al electro-deposition. Using Al2 Cl6 Br- instead of Al2 Cl7- , a kinetically accelerated Al-S battery has a sulfur utilization of more than 80 %, with at least four times the sulfur content and five times the current density than that of previous work.
RESUMO
Mechanical ball milling is a prevalent technology for material preparation and also serves as a post-treatment method to modify electrode materials, thus enhancing electrochemical performances. This study explores the microstructure modification of commercial activated carbon through mechanical ball milling, proving its efficacy in increasing sodium-ion energy storage. The evolution of activated carbon's physical and chemical properties during ball milling was systematically examined. It was observed that the quantity of closed pores and the graphitization degree in activated carbon increased with extended ball milling duration. The sodium storage mechanism in activated carbon transitions to an insertion-pore filling process, significantly elevating platform capacity. Additionally, ball-milled activated carbon demonstrates remarkable long-term cycling stability (92% capacity retention over 200 cycles at 200 mA g-1) and rate performance. This research offers a novel approach to developing advanced anode materials for sodium-ion batteries.
RESUMO
Electrochemical capacitors are under the spotlight due to their high power density, but they have a low energy density. Redox electrolytes have emerged as a promising approach to design high-energy electrochemical energy storage devices. Herein, a chlorine-based redox electrochemical capacitor is reported in an ionic liquid electrolyte. The commercial activated carbon is employed as the working electrode to render the reversible redox of chloride ions in an ionic liquid, by the restriction of micropores on neutral chlorine. The carbon material can simultaneously provide electrical double-layer capacitance. The effective integration of a chlorine redox reaction and electrical double layer allows for high-energy electrochemical capacitors. By this means, a rechargeable chlorine-based redox electrochemical capacitor with reversible capacity and good rate capability and cycling stability is obtained. This work offers a solution for a new type of high-energy electrochemical capacitors.
RESUMO
An N-superdoped 3D graphene network structure with an N-doping level up to 15.8 at% for high-performance supercapacitor is designed and synthesized, in which the graphene foam with high conductivity acts as skeleton and nested with N-superdoped reduced graphene oxide arogels. This material shows a highly conductive interconnected 3D porous structure (3.33 S cm-1 ), large surface area (583 m2 g-1 ), low internal resistance (0.4 Ω), good wettability, and a great number of active sites. Because of the multiple synergistic effects of these features, the supercapacitors based on this material show a remarkably excellent electrochemical behavior with a high specific capacitance (of up to 380, 332, and 245 F g-1 in alkaline, acidic, and neutral electrolytes measured in three-electrode configuration, respectively, 297 F g-1 in alkaline electrolytes measured in two-electrode configuration), good rate capability, excellent cycling stability (93.5% retention after 4600 cycles), and low internal resistance (0.4 Ω), resulting in high power density with proper high energy density.