Color and translucency of enamel in vital maxillary central incisors.

STATEMENT OF PROBLEM: Limited data, especially in vivo data, exist regarding translucency parameter (TP) values for vital anterior nonrestored dentition. Additionally, published information on the CIELab values of vital enamel at a theoretical infinite thickness is lacking. Obtaining TP and CIELab values in a population that varies in terms of ethnicity, age, and sex would be useful to inform the development and placement of esthetic dental restorations that more accurately capture the complex optical qualities of enamel. PURPOSE: The purpose of this clinical study was to investigate in vivo the TP and CIELab values of vital anterior incisor enamel at a theoretical infinite thickness in a diverse pool of participants who varied in age, ethnicity, and sex. MATERIAL AND METHODS: Spectral reflectance measurements (380 to 780 nm at 2-nm intervals) of the mid-incisal region of vital, unrestored maxillary anterior teeth were made in 120 participants, equally divided into 2 sexes, 4 racial or ethnic groups, and 5 age ranges. Instruments were oriented to achieve 0-degree observation and 45-degree illumination, and spectral measurements were made with white and black silicone backgrounds. Reflectance spectra of the incisal enamel from both the black and white silicone backing were used to fit to the Kubelka-Munk (K-M) reflectance theory. The CIEDE2000 color difference formula was used to determine TP, and data were compared among participant demographics. CIELab color coordinate values for enamel at an infinite thickness were calculated by using a D65 illumination and CIE standard human (2-degree) observer. To determine value ranges and significant differences among participant groups, CIELab values were analyzed with a 4-way ANOVA, and TP values were analyzed with a generalized linear mixed model. Pairwise comparisons of interest were evaluated with Bonferroni-corrected Student t tests. RESULTS: For maxillary central incisor enamel, the average TP was 10.1 ±3.6, and the average CIELab color coordinates were L∗=73.5 ±7.6, a∗=2.2 ±1.8, b∗=11.9 ±8.4. TP values of incisal enamel significantly differed among specific age and ethnic groups, with general significant interactions of age and sex (P=.009), as well as ethnicity and age (P=.042). CIE color coordinates of enamel at an infinite thickness were found in the L∗ coordinate among different age groups with the same sex and ethnicity, specifically when comparing CIELab direction with the population characteristics of age (P=.011) and the interaction between age, sex, and ethnicity (P=.035). CONCLUSIONS: In vivo L∗ values and TP values of incisal enamel differed significantly among groups determined by ethnicity, age, and sex.

Profile of prosthodontics program directors in North America.

PURPOSE: To develop a current profile of prosthodontics program directors (PPDs) in United States dental schools and describe the current challenges and responsibilities of those serving in the position and assess the professional needs of the program directors (PDs) to better support them in their roles. MATERIALS AND METHODS: A survey was sent to 51 participants who were identified as PPDs in North America via Qualtrics in 2019 to assess the professional needs of PDs to better support their roles. The survey consisted of 29 items organized into six sections: (1) demographic information; (2) hours and time spent in various areas of the job; (3) greatest challenges; (4) perceived importance of specific competencies; (5) opinions on the greatest rewards of the position; (6) their needs for support from the American College of Prosthodontists and advice for the future PD. RESULTS: The response rate for this survey was 88.3%. Of the 45 respondents, the majority were white/non-Hispanic, followed by Asian/Pacific Islanders. The two largest and equal numbers of participants who worked for more than 10 years and between 1 and 3 years were observed with approximately 29% each, and PDs who worked less than a year occupied the least amount. Overall, 34% of PDs are on the tenure track and 80% of those are tenured. Teaching and clinical services took away the greatest time with approximately 42% and 22.1%, respectively. Thirty-five (78%) PDs listed the greatest challenge they encountered was the workload of the role. Skills listed in leadership and personnel competencies were all rated more important than most of the skills listed in management. CONCLUSIONS: There is a wide gender gap and a lack of racial diversity among the PPDs. The biggest challenge faced by them is the amount of workload followed by budget and fiscal constraints. And for their improved efficiency, they gave emphasis on learning time management and continuous clinical training of newer advances.

Influence of interdental spaces and the palate on the accuracy of maxillary scans acquired using different intraoral scanners.

PURPOSE: To assess the influence of interdental spaces and scanning the palate on the accuracy of maxillary scans acquired using three intraoral scanners (IOSs). MATERIALS AND METHODS: A virtual completely dentate maxillary cast without interdental spaces was obtained and modified to create 1, 2, and 3 mm of interdental spacing between the anterior teeth. These three files (reference standard tessellation language files) were used to print three reference casts. The reference casts were scanned using three IOSs: TRIOS4, iTero Element 5D, and Aoralscan2. Three groups were created based on the interdental spaces: 0, 1, 2, and 3 mm (n = 10). The groups were subdivided into two subgroups: no palate (NP subgroup) and palate (P subgroup). The reference STL files were used to measure the discrepancy with the experimental scans by calculating the root mean square (RMS) error. Three-way analysis of variance (ANOVA) and post hoc Tukey pairwise comparison tests were used to analyze trueness. The Levene test was used to analyze precision (α = 0.05). RESULTS: Trueness ranged from 91 to 139 µm and precision ranged from 5 to 23 µm among the subgroups tested. A significant correlation was found between IOS*group (p<0.001) and IOS*subgroup ( p<0.001). Tukey test showed significant trueness differences among the interdental spaces tested (p<0.001). The 1- and 2-mm groups obtained better trueness than the 0- and 3-mm groups (p<0.001). An 11 µm mean trueness discrepancy was measured among the different interdental space groups tested. The P subgroups demonstrated significantly higher trueness when compared to the NP subgroups (p<0.001). The discrepancy between the maxillary scans with and without the palate was 4 µm. Significant precision discrepancies were found (p = 0.008), with the iTero group showing the lowest precision. CONCLUSION: Interdental spaces and incorporation of the palate on maxillary intraoral scans influenced trueness and precision of the three IOSs tested. However, the scanning discrepancy measured may be of no clinical relevance.

Mathematical Tooth Proportions: A Systematic Review.

PURPOSE: The aim of this systematic review was to evaluate and compare three commonly used proportions that include the golden proportion, golden percentage, and Recurring Esthetic Dental (RED) proportion to identify which of the mathematical formulas, if any, can be used to provide predictable and repeatable esthetic clinical outcomes. METHODS: A comprehensive search of electronic databases that included EBSCO, ProQuest, SCOPUS, Science Direct, Wiley, Google Scholar and PubMed was conducted using the terms: "golden proportion," "golden percentage," and "Recurring Esthetic Dental (RED) proportions" alone or in concurrence with one or both ensuing terms: "tooth proportions" and "esthetic tooth proportions." In addition, the following journals were hand searched for relevant articles: Journal of Prosthodontics, Journal of Prosthetic Dentistry and Journal of Esthetic and Restorative Dentistry. Related citations were also considered. RESULTS: Tooth proportions varied substantially in the natural dentition. No studies revealed findings that supported the use of one mathematical formula to predict esthetic success. The golden proportion is present between the central to lateral incisor in some cases, but rarely between the lateral incisor and the canine. When compared to the other proportions, the golden percentage provided better starting points for tooth shape and size, but only when values were adjusted to consider other factors such as ethnicity and/or facial proportions. CONCLUSION: Mathematical formulas did not provide consistent results that would allow for their use as a standardized guide for esthetically pleasing smiles. Although the golden percentage may be a good starting point if the percentages are adjusted on a case-by-case basis, generalized esthetic ideals cannot be determined by a mathematical formula and are open to interpretation by both the clinician and the patient.

Three-Dimensional Accuracy of Conventional Versus Digital Complete Arch Implant Impressions.

PURPOSE: The accuracy of digital impressions is still controversial for complete arch implant cases. The aim of this study is to compare the accuracy of different intraoral scanners with the conventional technique in terms of trueness and precision in a complete arch implant model. MATERIAL AND METHODS: Eight implants were inserted asymmetrically in a polyurethane edentulous mandibular model with different angulations. A 3-dimensional (3D) reference model was obtained by scanning this polyurethane model with an optical scanner. First, digital impressions were made by using 3 different intraoral scanners: Carestream 3500 (DC), Cerec Omnicam (DO) and 3Shape Trios 3 (DT). Subsequently, a nonsplinted open tray impression technique was used for conventional impression group (C) and then the master casts were digitalized with a lab scanner. Each 10 STL files belonging to 4 different impression groups were imported to a reverse engineering program, to measure distance and angle deviations from the reference model. All statistical analyses were performed after taking absolute values of the data. After comparing the impression groups with one-way ANOVA, the trueness and precision values were analyzed by Tukey post hoc test and 0.05 was used as the level of significance. RESULTS: The mean trueness of distance was 123.06 ± 89.83 µm for DC, 229.72 ± 121.34 µm for DO, 209.75 ± 47.07 µm for DT, and 345.32 ± 75.12 µm for C group (p < 0.0001). While DC showed significantly lower deviation compared to DO and C, no significant difference was found between DC and DT. C showed the highest distance deviation significantly in all groups; and no significant difference was found between DO and DT groups. In angle measurements; the trueness was 0.26° ± 0.07° for DC, 0.53° ± 0.42° for DO, 0.33° ± 0.30° for DT, and 0.74° ± 0.65° for C group. There was no significant difference between the groups in terms of angular trueness (p = 0.074). In terms of the precision for distance, the results of DC 80.43 ± 29.69 µm, DO 94.06 ± 69.96 µm, DT 35.55 ± 28.46 µm and C 66.97 ± 36.69 µm were determined (p = 0.036). The significant difference was found only between DT and DO among all groups. Finally, angular precision was determined to be 0.19° ± 0.11° for DC, 0.30° ± 0.28° for DO, 0.22° ± 0.19° for DT, and 0.50° ± 0.38° for Group C. No significant difference was found between the groups, in terms of angular precision (p = 0.053). CONCLUSIONS: All digital impression groups yielded superior data compared to conventional technique in terms of trueness. DC formed the impression group with the highest trueness in both distance and angular measurements. The results of this in vitro study suggest the use of intraoral scanners compared to the conventional impression techniques in complete arch implant cases with high angulations.

Management of intraoral stents for radiotherapy during COVID-19 pandemic.

Radiotherapy is being performed in many situations as a curative approach for head and neck cancer instead of surgery due to the current novel coronavirus disease (COVID-19) pandemic. A recent publication reported that even hypofractionation was being conducted in order to reduce the daily exposure of both patients and the medical staff involved in cancer therapies. As a result, dental teams may be requested more frequently than usual to fabricate intraoral stents (IOS). Given that IOS may be a potential source of COVID-19 contagion, the main purpose of the present correspondence is to offer a guide on how health professionals may be safely presented in the room, on the management of the IOS and also how to sanitize the stents.

Long-term stainability of interim prosthetic materials in acidic/staining solutions.

OBJECTIVE: To evaluate the long-term color stainability, translucency, and contrast ratio (CR) of different resins used to fabricate interim prostheses after immersion in acidic/staining solutions. MATERIALS AND METHODS: A total of 160 specimens were divided into 16 groups (n = 10) according to the material (heat-polymerized acrylic resin [HPAR], auto-polymerized acrylic resin [APR], nanoparticulated bis-acrylic resin [BR], and prefabricated poly(methyl methacrylate) block for CAD/CAM [CADR]) and immersion solutions (artificial saliva, cola beverage, coffee, and red wine). A spectrophotometer was used before and after each immersion period (7, 14, 28, 90, and 180 days). Color differences (CIEDE2000 and CIELab) were calculated. A three-way repeated-measures analysis of variance and Bonferroni test (α = .05) were used. RESULTS: After 180 days, the APR presented the highest value for coffee and the CADR presented the smallest value for the cola (P < .001). For the CR, the highest values were obtained at 180 days for BR in coffee (1.35) and wine (1.18) (P < .001). Higher translucency parameters were obtained in the BR and CADR in the initial, 14, 28, and 90 days (P < .001). CONCLUSIONS: From the greatest to the smallest staining potential, the solutions were classified as: wine > coffee > cola beverage > saliva, while for the materials as: APR > BR > HPAR > CADR. CLINICAL SIGNIFICANCE: The knowledge of the long-term optical behavior of interim prosthetic materials is important for clinicians to decide which material to use to match the dietary intake of their patients and their esthetic demands. Prefabricated blocks for CAD/CAM systems have been shown to maintaining their optical characteristics even after a long period of immersion in acidic/staining solutions.

Accuracy of complete-arch implant impression made with occlusal registration material.

STATEMENT OF PROBLEM: Which impression material, impression tray type, and implant impression technique combination produces the most accurate complete-arch impression is unclear. PURPOSE: The purpose of this in vitro study was to compare the implant impression accuracy of a completely edentulous arch made with addition silicone occlusal registration material and an open tray with the implant impression accuracy of other conventional impression techniques. MATERIAL AND METHODS: A master cast was fabricated from Type IV gypsum with four 3.8-mm diameter implants with internal hexagon located in the area of mandibular canines and first molars. Impressions (N=60) were made from the master cast using the 6 techniques investigated: group B-OC-N with occlusal registration impression material (B), open custom tray (OC), and nonsplinted impression pins (N); group B-OS-N with occlusal registration impression material (B), open plastic perforated stock tray (OS), and nonsplinted impression pins (N); group PE-OC-N with polyether medium-body impression material (PE), open custom tray (OC), and nonsplinted impression pins (N); group PE-OC-S with polyether medium-body impression material (PE), open custom tray (OC), and impression pins splinted (S) with autopolymerizing resin cut after 17 minutes and reconnected; group PE-CC-N with polyether medium-body impression material (PE), closed custom tray (CC), and nonsplinted impression pins (N); group PVS-CS-N with simultaneous double-mix polyvinyl siloxane impression material (PVS), closed stock perforated metal tray (CS), and nonsplinted impression pins (N). Type IV gypsum casts were fabricated 24 hours after making the impressions. A computerized numerical control 3D coordinate measuring machine was used to measure the absolute differences of the distances between the centroids of the 4 implants among the casts produced and the distances measured at the master cast. The Kruskal-Wallis test was used to determine differences among the experimental groups (α=.05). The Mann-Whitney U post hoc analysis was used for all group combinations. RESULTS: No significant differences were found between the test groups B-OC-N and PE-OC-S, which were more accurate than the other groups. Group B-OS-N resulted in the least accurate impressions of all experimental groups. Group PE-OC-S resulted in more accurate impressions than the PE-OC-N group. No statistically significant differences were found between groups PE-OC-N and PE-CC-N or between groups PVS-CS-N and PE-CC-N. CONCLUSIONS: For complete edentulism, the use of silicone occlusal registration material with an open custom tray and nonsplinted impression pins resulted in impressions as accurate as those produced with PE open custom tray with splinted impression pins. These 2 techniques resulted in more accurate impressions than the other 4 techniques studied.

Prosthodontic Resident Selection by Postdoctoral Dental Matching Program: A National Survey by Participating Program Director.

PURPOSE: The purpose of this study was to obtain information about the resident selection and Match process that occurred for the Commission on Dental Accreditation (CODA)-accredited Advanced Education in Prosthodontics program in North America from the program directors' perspective, after the first year of implementation. MATERIALS AND METHODS: The list of Advanced Education in Prosthodontics program in CODA-accredited North American institutions was obtained from the ACP central office, and the directors of each program were identified. The surveys were distributed to 48 program directors online and results were compiled. RESULTS: Out of 48 programs, 43 directors responded to and completed the survey (90.0%), where 35 programs participated in the Match process, 5 did not, and 3 were omitted due to incomplete surveys. While the majority of programs did not see any changes in their applicant pool or their quality, 10 programs (25.0%) observed a number of increases in the application and 13 programs (32.5%) observed an increase in the quality of the applications. Among the 35 programs that participated in the Match process, the main reasons for their participation were "fairness" (48.2%), "did not want to keep moving up interview dates" (23.2%), and "have applicants come to interview as planned" (21.4%). Thirty-three programs reported that 75% to 100% of the invited applicants came to the interview (76.7%). The majority of programs that participated in Match expressed satisfaction with the process (29/33, 80.6%). Sixteen programs (45.7%) reported that they matched with 100% of their first selections. CONCLUSION: Overall response of reintroduction of the Match process for advanced prosthodontic resident selection was very positive for majority of the program directors.

Status of Sleep Apnea and Snoring Disorder Curriculum in U.S. Advanced Education Prosthodontic Programs.

PURPOSE: To assess the management of sleep apnea and snoring disorders in Advanced Education Programs in Prosthodontics (AEPP) in the United States. MATERIALS AND METHODS: A 51 item, online survey was sent to program directors at 48 AEPPs in the United States in 2015. Data results were analyzed descriptively. RESULTS: Thirty-five program directors responded to the survey. Twenty-four (68.6%, N = 35) programs report not having a dedicated course for the treatment of sleep apnea and snoring disorders. The majority (94.3%) of programs chose to treat sleep disordered breathing with oral appliance therapy and 80.0% (N = 35) of programs utilize customized sleep apnea oral devices. However, only 48.6% (N = 35) and 51.4% (N = 35) of programs regularly address sleep apnea and snoring disorders at initial examination during the comprehensive exam and medical history questionnaire, respectively. CONCLUSIONS: The confidence interval for this survey is 8.71 at a confidence level of 95% due to a response rate of 72.9%. This confidence interval suggests there is responder bias in the survey results. Therefore, the results of this survey provide a suggestion of how sleep disorders are managed in AEPPs. Programs appear to be consistent among each other with regards to treatment modalities for sleep disordered breathing. The results suggest that patients are not screened enough to receive treatment addressing sleep disorders.

Color stability of maxillofacial prosthetic silicone functionalized with oxide nanocoating.

STATEMENT OF PROBLEM: Maxillofacial prostheses made of silicone elastomers undergo undesirable color degradation over time. How this color change can be prevented is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the ability of an oxide nanocoating to prevent color degradation of maxillofacial silicone elastomers after artificial accelerated aging. MATERIAL AND METHODS: A silicone elastomer with functional intrinsic pigment was tested. Specimens (N=20) were fabricated, and half of them were coated with a nanolayer of titanium dioxide (TiO2) using atomic layer deposition. Both coated and noncoated specimens (control) were exposed to artificial aging at 450 kJ/m2 of total energy. Changes in the color of all the specimens with and without TiO2 nanocoating were measured before and after the atomic layer deposition coating and before and after aging. The obtained color data were analyzed by using independent t tests and the 1-sample t test (α=.05). RESULTS: Color change (ΔE1=3.4 ±1.4) was observed for the silicone elastomers after the specimens were surface coated with TiO2 nanofilm, although this change was not statistically significant (P=.369) compared with the acceptability threshold (ΔE=3.0). Upon exposure to artificial aging, the noncoated control specimens underwent color change (ΔE2=2.5 ±0.7, P=.083 compared with the acceptability threshold). The specimens with TiO2 nanocoated surface experienced the least color change (ΔE3=1.4 ±0.6) when subjected to artificial aging, and this change was significantly lower (P<.001) than the established acceptability threshold of ΔE=3.0. In addition, the chemical analyses confirmed that the TiO2 nanocoating remained on the surface after exposure to artificial aging. CONCLUSIONS: TiO2 nanocoating was shown to be effective in reducing color degradation of the silicone elastomer exposed to artificial aging for 120 hours with 450 kJ/m2 of total energy.

Wear Characteristics and Volume Loss of CAD/CAM Ceramic Materials.

PURPOSE: In the field of prosthodontics, patients often require complex and extensive restorative care. This can involve the use of dental restorations to restore teeth on both the maxillary and mandibular arch. Current literature has evaluated the wear properties of different dental ceramics against enamel, but studies regarding dental ceramics opposing one another are limited. The purpose of this study was to assess the wear potential and wear behavior of CAD/CAM zirconia (ZR) and lithium disilicate (LD) materials against a similar ceramic material, and how the surface finish of these dental ceramics might affect patterns of wear. MATERIALS AND METHODS: Using a sphere-on-plate tribometer system, different surface finishes (glazed-G and glazed then polished-GP) of ZR and LD were evaluated following wear simulation. Artificial saliva of physiologic pH was used as a lubricant during wear simulation at 37°C. The coefficient of friction (COF) was calculated during the wear simulation. After wear simulation was complete, volume loss, surface roughness, and surface characterization of the specimens were analyzed using white-light interferometry and scanning electron microscopy (SEM). Statistical significance between materials and surface finish was established with two-way ANOVA and Bonferroni post hoc test (α = 0.05). RESULTS: Based on the 2-way ANOVA, material (p = 0.002) significantly affected the COF. LD showed a higher COF (p = 0.002) than ZR. Material (p < 0.001) and surface finish (p = 0.004) significantly affected the surface roughness inside the scar. ZR had significantly lower surface roughness compared to LD (p < 0.001). For outside scar, surface finish (p < 0.001) significantly affected the surface roughness. Polished specimens showed significantly higher roughness compared to glazed specimens for both inside (p = 0.004) and outside scar (p < 0.001). For volume loss, material (p < 0.001) and the interaction between material and surface finish (p < 0.001) were statistically significant. LD had higher volume loss than ZR (p < 0.001). For both glazed and polished finished, LD-G and LD-GP had significantly higher volume loss than ZR-G (p = 0.028), and ZR-GP (p < 0.001), respectively. SEM analysis indicated particle build-up and a grooving mechanism of wear for the LD-GP specimens. This suggested a three-body wear phenomenon occurring for LD-GP specimens, which was not visible in SEM imaging for other specimen types. CONCLUSIONS: This study demonstrated the resistance to wear and low abrasiveness of ZR when compared to LD in a simulated masticatory environment. This can be best explained by the increased strength of ZR, and the introduction of three-body wear to LD specimens from the accumulation of embedded wear debris onto its surface. Wear data and comparison of SEM images following wear simulation confirmed this interpretation.

Effect of brushing and thermocycling on the shade and surface roughness of CAD-CAM ceramic restorations.

STATEMENT OF PROBLEM: The effects of toothbrushing (B) and thermocycling (TC) on the surface texture of different materials with various fabrication processes have been investigated. However, studies of computer-aided design and computer-aided manufacturing (CAD-CAM) ceramic restorations are limited. PURPOSE: The purpose of this in vitro study was to evaluate the effect of B and TC on the color stability and surface roughness of extrinsically characterized and glazed CAD-CAM ceramic restorations. MATERIAL AND METHODS: Lithium disilicate CAD ceramic (n=90) and zirconia ceramic (n=90) were studied. All specimens were crystallized/sintered, characterized, and glazed following the manufacturer's recommendation. The specimens were divided into 9 different groups: B, TC, and a combination of B plus TC (B+TC). Brushing was performed at 50 000, 100 000, and 150 000 cycles, simulating an oral environment of 5, 10, and 15 years. Thermocycling was performed at 6000, 12 000, and 18 000 cycles, simulating an oral environment of 5, 10, and 15 years. Brushing plus TC was performed with the combination of the 50 000 cycles of B, then 6000 cycles of TC, and 10 000 cycles of B, then 12 000 cycles of TC, and 15 000 cycles of B, then 18 000 cycles of TC. The color and surface roughness of each specimen were measured before and after all interventions with simulated cycles. Color differences (ΔE) and surface roughness (ΔRa) data were analyzed using 2-way ANOVA, followed by the least significant difference test (α=.05). The correlation between ΔE and ΔRa was statistically analyzed using the Pearson correlation analysis. RESULTS: Within the lithium disilicate CAD groups, intervention did not result in any significant differences in color change (P>.05). Within the zirconia groups, a 15-year clinical simulation revealed significantly higher ΔE values than a simulated 5-year exposure (P=.017). Increased simulated cycles showed significantly higher Ra values for all groups. Within the zirconia groups, B revealed significantly smoother surfaces than TC (P<.001) and B+TC interventions (P<.001). For the zirconia, simulating B+TC for15 years revealed significantly higher Ra values than the groups of B+TC for 5 years (P<.001) and B+TC for 10 years (P=.003). No correlation (lithium disilicate CAD, r=.079; P=.462; zirconia, r=.001; P=.989) was found between the color change and surface roughness. CONCLUSIONS: For both lithium disilicate CAD and zirconia, color changes were below the selected clinical perceptible threshold (ΔE=2.6) after all intervention and simulated cycles. All mean surface roughness measurements were below 0.2 µm. Generally, the surface of both lithium disilicate CAD and zirconia became rougher. No correlation was found between color difference and surface roughness for either material.

Initial investigation of the corrosion stability of craniofacial implants.

STATEMENT OF PROBLEM: Although craniofacial implants have been used for retention of facial prostheses, failures are common. Titanium undergoes corrosion in the oral cavity, but the corrosion of craniofacial implants requires evaluation. PURPOSE: The purpose of this in vitro study was to investigate the corrosion stability of commercially pure titanium (CP Ti) exposed to simulated human perspiration at 2 different pH levels (5.5 and 8). MATERIAL AND METHODS: Fifteen titanium disks were divided into 3 groups (n=5 per group). The control group was subjected to simulated body fluid (SBF) (control). Disks from the 2 experimental groups were immersed in simulated alkaline perspiration (SAKP) and simulated acidic perspiration (SACP). Electrochemical tests, including open circuit potential (3600 seconds), electrochemical impedance spectroscopy, and potentiodynamic tests were performed according to the standardized method of 3-cell electrodes. Data were analyzed by 1-way ANOVA and the Tukey honestly significant difference tests (α=.05). RESULTS: Simulated human perspiration reduced the corrosion stability of CP Ti (P<.05). The SBF group presented the lowest capacitance values (P<.05). SAKP and SACP groups showed increased values of capacitance and showed no statistically significant differences (P>.05) from each other. The increase in capacitance suggests that the acceleration of the ionic exchanges between the CP Ti and the electrolyte leads to a lower corrosion resistance. SAKP reduced the oxide layer resistance of CP Ti (P<.05), and an increased corrosion rate was noted in both simulated human perspiration groups. CONCLUSIONS: Craniofacial implants can corrode when in contact with simulated human perspiration, whereas alkaline perspiration shows a more deleterious effect. Perspiration induces a more corrosive effect than simulated body fluid.

Maxillofacial prosthetics training and practice profiles in the United States.

STATEMENT OF PROBLEM: The motivation of maxillofacial prosthodontists to go into fellowship training and specific procedures in maxillofacial prosthetics practice once they have completed training has not been previously evaluated. PURPOSE: The purpose of this study was to survey maxillofacial prosthodontists in the United States to investigate their reasons for pursuing maxillofacial prosthetic training and their practice profiles. MATERIAL AND METHODS: In June 2015, a survey was sent to all US maxillofacial prosthodontists asking for descriptive demographics, their reasoning as to what prompted entrance into a maxillofacial prosthetic program, and their practice pattern. Frequencies, percentages, means, and standard deviations were calculated and reported. RESULTS: The survey response rate was 60.4%. The main reason for pursuing maxillofacial training was primarily personal satisfaction, prosthodontic residency exposure, and mentorship rather than media exposure and compensation. The time spent in prosthodontic practice varied among practitioners, with the majority of practice time spent accomplishing standard prosthodontic procedures (65.59%) versus maxillofacial (25.53%) or surgical procedures (9.67%). Of 12 clinical maxillofacial procedures inquired about, the most prevalent were obturators, dental oncology, and mandibular resections. CONCLUSIONS: This study reveals that personal satisfaction, mentorship, and prosthodontic residency exposure were the reasons most prosthodontists pursued an additional year of maxillofacial prosthetic fellowship. Most were very satisfied with their training and chosen career path and would recommend an additional year of training. The majority of maxillofacial prosthodontists provided maxillofacial prosthetic treatment for approximately one fourth of their practice time. The most common procedures performed were obturators, dental oncology, and mandibular resections.

Assessment of treatment outcomes for facial prostheses in patients with craniofacial defects: A pilot retrospective study.

STATEMENT OF PROBLEM: The longevity of silicone facial prostheses is short, and published data concerning this type of rehabilitation are limited. PURPOSE: The purpose of this retrospective study was to identify predictive variables for prosthetic failure and to highlight the results that can be expected after treatment with silicone facial prostheses. MATERIAL AND METHODS: After institutional approval, patient records from a single Brazilian institution for the time period 2004 to 2015 were assessed. A standardized form was used to collect patient data. Frailty survival modeling (simple random effects survival model) was used to test whether age, sex, type of prosthesis, source of defect, number of implants, and type of retention have a direct impact on the prosthetic failure rate (α=.05). RESULTS: Auricular prostheses were the most frequently fabricated prostheses. Eighty-four prostheses were fabricated during the follow-up period. The overall survival rate for facial prostheses was 34.5%. Color alteration was the most common reason for new prostheses (27.38%). The implant success rate was 98.18%. The number of implants approached statistical significance (P=.06) with a reduced risk of failure when the patient had 2 implants compared with patients with zero implants and patients with more than 2 implants. CONCLUSIONS: Patients should be recalled frequently so that retouches can be performed, avoiding the repeated fabrication of new prostheses. Well-designed studies are necessary to identify more relevant complications and factors that lead to prosthetic failure.

Lighting conditions used during visual shade matching in private dental offices.

STATEMENT OF PROBLEM: To our knowledge, no data are available on the actual lighting that is used for visual shade matching in private dental offices. PURPOSE: The purpose of this study was to determine the shade matching practices and interest in continuing education in dental practices and to determine the quantity and quality of the ambient lighting used during visual shade matching in a sample cohort of dentists in private practices. MATERIAL AND METHODS: Thirty-two private practices were enrolled, and each completed a 1-page survey on the clinic's shade matching practices. A spectrophotometer was used to measure the ambient lighting in each practice, collecting data on color temperature (Kelvin), color rendering index (CRI), and light intensity (foot candles/fc). A 2-sided nonparametric sign test was used to compare the true median color temperature with the standard (5500°K). A 1-sided t test was used to compare the CRI with the standard (CRI >90) (α=.05 for all statistical analyses). RESULTS: All dental practitioners surveyed used mainly visual shade matching in their practices. Of those, 87.5% showed interest in attending continuing education on this topic, with 56.3% preferring a clinical demonstration course. The mean color temperature was 4152.9°K and was significantly different from the standard 5500°K (P<.001). The 1-sided t test indicated that the mean CRI was less than 90 (P=1). The 95% confidence interval for the intensity was 80.7 to 111.6 fc. CONCLUSIONS: The ambient light in the majority of the 32 dental private practices measured was not ideal for visual shade matching.

Evaluating a Web-Based Educational Module on Oral Cancer Examination Based on a Behavioral Framework.

Patients at risk of developing oral and/or oropharyngeal cancer (OPC) are more likely to see primary care providers (PCPs) than a dentist. Many PCPs do not regularly perform oral cancer examination (OCE). The purpose of this study was to design a web-based educational program based on a behavioral framework to encourage PCPs to conduct OCE. PCPs were solicited to provide feedback on the program and to evaluate their short-term knowledge. The integrated behavioral model was used to design the program. Fifteen PCPs (five in each group: physicians, physician assistants, and nurse practitioners) reviewed the program and took a posttest: (1) index of knowledge of risk factors for oral cancer (RiskOC) and (2) index of knowledge of diagnostic procedures for oral cancer (DiagOC). Findings from the process evaluation were mainly positive, with comments on the length of the program comprising the ten negative comments. No significant difference among groups of PCPs (physicians, physician assistants, and nurse practitioners) was detected for DiagOC (p = 0.43) or RiskOC (p = 0.201). A program on OPC for PCPs should be less than 40 min. Postviewing knowledge outcomes were similar for all PCPs. The web-based program on OPC based on a behavioral framework could have similar short-term knowledge outcomes for all PCPs and may increase the number of PCPs performing OCEs.

Flexural strength of small connector designs of zirconia-based partial fixed dental prostheses.

STATEMENT OF PROBLEM: Partial fixed dental prostheses with a small connector size are required for optimal esthetics and limited interarch space; however, final strength is endangered. PURPOSE: The purpose of this in vitro study was to evaluate the effect of different connector designs on the flexural strength of simulated 3-unit partial fixed dental prostheses made of yttria-stabilized tetragonal zirconia polycrystalline using computer-aided design and computer-aided manufacturing technology. MATERIAL AND METHODS: To simulate a 3-unit partial fixed dental prosthesis, 20 rectangular bar-shaped specimens were fabricated with dimensions of 4 ± 0.05 mm (H) × 4 ± 0.05 mm (W) × 30 0.5 mm (L). Each bar specimen had 2 constricted parts on both sides, representing the connector and defining a central pontic of 10 ± 0.10 mm in length. The specimens were divided into 4 groups according to the connector diameter and design, as follows: SR: 2 mm (H) × 3 mm (W) round 0.6 mm radius of curvature; SS: 2 mm (H) × 3 mm (W) sharp 0.1 mm radius of curvature; CR: 3 mm (H) × 3 mm (W) round 0.6 mm radius of curvature; and CS: 3 mm (H) × 3 mm (W) sharp 0.1 mm radius of curvature. An additional 5 specimens were fabricated with no constriction and served as the control group. The specimens were subjected to a 3-point flexural strength test in a universal testing machine with a crosshead speed of 0.5 mm/min until failure. Scanning electron microscopic and photomicrograph images were used to examine the fracture surfaces. Two-way ANOVA and the Tukey-Kramer post hoc test were used to analyze the data (α = .05). RESULTS: The mean flexural strength for SR 2 mm (H) × 3 mm (W) round 0.6 mm radius of curvature (583.6 ± 49.7 MPa) was significantly higher than that of SS, which was 2 mm (H)× 3 mm (W) sharp 0.1 mm radius of curvature (502.8 ± 23.3 MPa). Similarly, the mean flexural strength for CR was 3 mm (H) × 3 mm (W) round 0.6 mm radius of curvature (682.9 ± 36.8), which was significantly higher than that of CC, 3 mm (H) × 3 mm (W) sharp 0.1 mm radius of curvature (486.7 ± 35.6 MPa). CONCLUSIONS: The flexural strength of the yttria-stabilized tetragonal zirconia polycrystalline-based ceramics was affected by the connector dimension and design. The 2-round connector design was more able to withstand occlusal forces than the sharp design. The 3-connector design with a minimum cross section of 2 × 3 mm is recommended for anterior fixed dental prostheses, provided it has a round curvature.