RESUMO
We explore the FeRh magnetic phase transition (MPT) and magnetic phase domain (MPD) with the introduction of surface acoustic waves (SAWs). The effects of the SAW pulses with different pulse widths and powers on resistance-temperature loops are investigated, revealing that the SAW can reduce the thermal hysteresis. Meanwhile, the SAW-induced comb-like antiferromagnetic (AFM) phase domains are observed. By changing the pulse width and SAW frequency, we further realize a writing-erasing process of the different comb-like AFM phase domains in the mixed-phase regime of the cooling transition branch. Resistance measurements also display the repeated SAW writing-erasing and the nonvolatile characteristic clearly. MPT paths are measured to demonstrate that short SAW pulses induce isothermal MPT and write magnetic phase patterns via the dynamic strain, whereas long SAW pulses erase patterns via the acoustothermal effect. The Preisach model is introduced to model the FeRh MPT under the SAW pulses, and the calculated results correspond well with our experiments, which reveals the SAW-induced energy modulation promotes FeRh MPT. COMSOL simulations of the SAW strain field also support our results. Our study not only can be used to reduce the thermal hysteresis but also extends the application of the SAW as a tool to write and erase AFM patterns for spintronics and magnonics.
RESUMO
Ultrastrong and deep-strong coupling are two coupling regimes rich in intriguing physical phenomena. Recently, hybrid magnonic systems have emerged as promising candidates for exploring these regimes, owing to their unique advantages in quantum engineering. However, because of the relatively weak coupling between magnons and other quasiparticles, ultrastrong coupling is predominantly realized at cryogenic temperatures, while deep-strong coupling remains to be explored. In our work, we achieve both theoretical and experimental realization of room-temperature ultrastrong magnon-magnon coupling in synthetic antiferromagnets with intrinsic asymmetry of magnetic anisotropy. Unlike most ultrastrong coupling systems, where the counter-rotating coupling strength g2 is strictly equal to the co-rotating coupling strength g1, our systems allow for highly tunable g1 and g2. This high degree of freedom also enables the realization of normalized g1 or g2 larger than 0.5. Particularly, our experimental findings reveal that the maximum observed g1 is nearly identical to the bare frequency, with g1/ω0 = 0.963, indicating a close realization of deep-strong coupling within our hybrid magnonic systems. Our results highlight synthetic antiferromagnets as platforms for exploring unconventional ultrastrong and even deep-strong coupling regimes, facilitating the further exploration of quantum phenomena.
RESUMO
Objective: To systematically evaluate the relationship between cancer-associated fibroblasts (CAFs) and clinicopathological characteristics and prognosis of gastric cancer, so as to provide new directions and clinical evidence for the diagnosis and treatment of this disease. Methods: We searched PubMed, Embase, Web of Science, and The Cochrane Library to identify studies on the correlation between tumor-associated fibroblasts and the diagnosis and prognosis of gastric cancer. Two researchers screened the literature independently to extract data, evaluated the quality of the included studies, and used the Review Manager 5.4 software to perform a meta-analysis. Results: A total of 14 studies involving a total of 2,703 patients were included. The meta-analysis results showed that high expression of CAFs was associated with stage III-IV gastric cancer (relative risk ratio [RR]=1.59; 95% confidence interval [CI]: [1.24-2.04]; P=0.0003), lymph node metastasis (RR=1.51; 95% CI: [1.23-1.87]; P=0.0001), serosal infiltration (RR=1.56, 95% CI: [1.24-1.95]; P=0.0001), diffuse and mixed types in Lauren classification (RR=1.43; 95% CI: [1.18-1.74]; P=0.0003), vascular invasion (RR=1.99; 95% CI: [1.26-3.14]; P=0.003), and overall survival (hazard ratio [HR]=1.38; 95% CI: [1.22-1.56]; P<0.00001). However, the high expression of CAFs was not significantly correlated with poorly differentiated gastric cancer (RR=1.03; 95% CI: [0.96-1.10]; P=0.45) and gastric cancer with tumor diameter >5 cm (RR=1.34; 95% CI: [0.98-1.83]; P=0.07). Conclusion: The findings of this meta-analysis demonstrated that high expression of CAFs is closely associated with the traditional pathological indicators related to poor prognosis in gastric cancer, and is a valuable prognostic factor in this setting. Systematic Review Registration: https://www.crd.york.ac.uk/PROSPERO/, identifier CRD42022358165.
RESUMO
The discovery of magnetic order in atomically-thin van der Waals materials has strengthened the alliance between spintronics and two-dimensional materials. An important use of magnetic two-dimensional materials in spintronic devices, which has not yet been demonstrated, would be for coherent spin injection via the spin-pumping effect. Here, we report spin pumping from Cr2Ge2Te6 into Pt or W and detection of the spin current by inverse spin Hall effect. The magnetization dynamics of the hybrid Cr2Ge2Te6/Pt system are measured, and a magnetic damping constant of ~ 4-10 × 10-4 is obtained for thick Cr2Ge2Te6 flakes, a record low for ferromagnetic van der Waals materials. Moreover, a high interface spin transmission efficiency (a spin mixing conductance of 2.4 × 1019/m2) is directly extracted, which is instrumental in delivering spin-related quantities such as spin angular momentum and spin-orbit torque across an interface of the van der Waals system. The low magnetic damping that promotes efficient spin current generation together with high interfacial spin transmission efficiency suggests promising applications for integrating Cr2Ge2Te6 into low-temperature two-dimensional spintronic devices as the source of coherent spin or magnon current.
RESUMO
Manipulation of magnetization by electric-current-induced spin-orbit torque (SOT) is of great importance for spintronic applications because of its merits in energy-efficient and high-speed operation. An ideal material for SOT applications should possess high charge-spin conversion efficiency and high electrical conductivity. Recently, transition metal dichalcogenides (TMDs) emerge as intriguing platforms for SOT study because of their controllability in spin-orbit coupling, conductivity, and energy band topology. Although TMDs show great potentials in SOT applications, the present study is restricted to the mechanically exfoliated samples with small sizes and relatively low conductivities. Here, a manufacturable recipe is developed to fabricate large-area thin films of PtTe2 , a type-II Dirac semimetal, to study their capability of generating SOT. Large SOT efficiency together with high conductivity results in a giant spin Hall conductivity of PtTe2 thin films, which is the largest value among the presently reported TMDs. It is further demonstrated that the SOT from PtTe2 layer can switch a perpendicularly magnetized CoTb layer efficiently. This work paves the way for employing PtTe2 -like TMDs for wafer-scale spintronic device applications.
RESUMO
The emergence of magnetic skyrmions, topological spin textures, has aroused tremendous interest in studying the rich physics related to their topology. While skyrmions promise high-density and energy-efficient magnetic memory devices for information technology, the manifestation of their nontrivial topology through single skyrmions and ordered and disordered skyrmion lattices could also give rise to many fascinating physical phenomena, such as chiral magnon and skyrmion glass states. Therefore, generating skyrmions at designated locations on a large scale, while controlling the skyrmion patterns, is the key to advancing topological magnetism. Here, a new, yet general, approach to the "printing" of skyrmions with zero-field stability in arbitrary patterns on a massive scale in exchange-biased magnetic multilayers is presented. By exploiting the fact that the antiferromagnetic order can be reconfigured by local thermal excitations, a focused electron beam with a graphic pattern generator to "print" skyrmions is used, which is referred to as skyrmion lithography. This work provides a route to design arbitrary skyrmion patterns, thereby establishing the foundation for further exploration of topological magnetism.
RESUMO
The recent discovery of ferromagnetism in two-dimensional (2D) van der Waals (vdW) materials holds promises for spintronic devices with exceptional properties. However, to use 2D vdW magnets for building spintronic nanodevices such as magnetic memories, key challenges remain in terms of effectively switching the magnetization from one state to the other electrically. Here, we devise a bilayer structure of Fe3GeTe2/Pt, in which the magnetization of few-layered Fe3GeTe2 can be effectively switched by the spin-orbit torques (SOTs) originated from the current flowing in the Pt layer. The effective magnetic fields corresponding to the SOTs are further quantitatively characterized using harmonic measurements. Our demonstration of the SOT-driven magnetization switching in a 2D vdW magnet could pave the way for implementing low-dimensional materials in the next-generation spintronic applications.
RESUMO
Room temperature magnetic skyrmions in magnetic multilayers are considered as information carriers for future spintronic applications. Currently, a detailed understanding of the skyrmion stabilization mechanisms is still lacking in these systems. To gain more insight, it is first and foremost essential to determine the full real-space spin configuration. Here, two advanced X-ray techniques are applied, based on magnetic circular dichroism, to investigate the spin textures of skyrmions in [Ta/CoFeB/MgO]n multilayers. First, by using ptychography, a high-resolution diffraction imaging technique, the 2D out-of-plane spin profile of skyrmions with a spatial resolution of 10 nm is determined. Second, by performing circular dichroism in resonant elastic X-ray scattering, it is demonstrated that the chirality of the magnetic structure undergoes a depth-dependent evolution. This suggests that the skyrmion structure is a complex 3D structure rather than an identical planar texture throughout the layer stack. The analyses of the spin textures confirm the theoretical predictions that the dipole-dipole interactions together with the external magnetic field play an important role in stabilizing sub-100 nm diameter skyrmions and the hybrid structure of the skyrmion domain wall. This combined X-ray-based approach opens the door for in-depth studies of magnetic skyrmion systems, which allows for precise engineering of optimized skyrmion heterostructures.
RESUMO
We investigated the magnetic anisotropy and the high-frequency property of flexible Fe60Co26Ta14 (FeCoTa) thin films obtained by oblique sputtering onto a wrinkled surface. The sinuously wrinkled topography is produced by growing Ta layer on a pre-strained polydimethylsiloxane (PDMS) membrane. Due to the enhanced effect of shadowing, the oblique deposition of FeCoTa layer gives rise to a shift of wrinkle peak towards the incident atomic flux. With increasing the PDMS pre-strain or increasing the oblique sputtering angle, both the uniaxial magnetic anisotropy and the ferromagnetic resonance frequency of FeCoTa films are enhanced, but the initial permeability decreases. The magnetization reversal mechanism of wrinkled FeCoTa films can be interpreted by a two-phase model composed of both coherent rotation and domain wall nucleation. With the enhancement of uniaxial magnetic anisotropy, the domain wall nucleation becomes pronounced in FeCoTa films.
RESUMO
A short-circuited coplanar waveguide jig was proposed due to its simple structure and potential applications, which was successfully used to measure the permeability spectra of magnetic thin film. The result obtained from the coplanar waveguide (CPW) jig exhibits typical ferromagnetic resonance spectra, which can be well fitted by a trade-off equation because the measured permeability spectra have a bit of asymmetry because of the special intensity distribution of the microwave magnetic field in the CPW. In order to confirm the availability of the shorted CPW jig, a previous short-circuited microstrip line jig was used to measure the permeability spectra of the same sample. The dynamic permeability results obtained by using different jigs are commendably consistent, and the accurate and valid results are also confirmed by using the vector network analyzer ferromagnetic resonance method.
RESUMO
Width-controlled M-type hexagonal SrFe12O19 nanoribbons were synthesized for the first time via polyvinylpyrrolidone (PVP) sol assisted electrospinning followed by heat treatment in air, and their chemical composition, microstructure and magnetic performance were investigated. Results demonstrated that as-obtained SrFe12O19 nanoribbons were well-crystallized with high purity. Each nanoribbon was self-assembled by abundant single-domain SrFe12O19 nanoparticles and was consecutive on structure and uniform on width. PVP in the spinning solution played a significant influence on the microstructure features of SrFe12O19 nanoribbons. With PVP concentration increasing, the ribbon-width was increased but the particle-size was reduced, which distributed on a same ribbon were more intensive, and then the ribbon-surface became flat. The room temperature magnetic performance investigation revealed that considerable large saturation magnetization (Ms) and coercivity (Hc) were obtained for all SrFe12O19 nanoribbons, and they increased with the ribbon-width broadening. The highest Ms of 67.9 emu · g(-1) and Hc of 7.31 kOe were concurrently acquired for SrFe12O19 nanoribbons with the maximum ribbon-width. Finally, the Stoner-Wohlfarth curling model was suggested to dominate the magnetization reverse of SrFe12O19 nanoribbons. It is deeply expected that this work is capable of opening up a new insights into the architectural design of 1D magnetic materials and their further utilization.
RESUMO
Being capable of gathering advanced optical, electrical and magnetic properties originating from different components, multifunctional composite nanomaterials have been of concern increasingly. Herein, we have successfully demonstrated the preparation of SrTiO3/NiFe2O4 porous nanotubes (PNTs) and SrTiO3/NiFe2O4 particle-in-tubes (PITs) via a single-spinneret electrospinning and a side-by-side-spinneret electrospinning, respectively. The products were characterized by using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-visible diffuse reflectance spectra and a vibrating sample magnetometer in detail. The results indicate that SrTiO3/NiFe2O4 PNTs are the heterojunction nanotubes by connecting perovskite SrTiO3 and spinel NiFe2O4 nanoparticles, but SrTiO3/NiFe2O4 PITs are the self-assembled core/shell structures by embedding SrTiO3 nanoparticles into NiFe2O4 nanotubes. Compared with pure SrTiO3 nanofibers, the two SrTiO3/NiFe2O4 composites exhibit a powerful light response and excellent room temperature ferromagnetism. The magnetic separations directly reveal that such amazing recycling efficiencies of about 95% for SrTiO3/NiFe2O4 PNTs and about 99.5% for SrTiO3/NiFe2O4 PITs are obtained. Furthermore, both the magnetic composites perform considerable photocatalytic activity in the degradation of rhodamine B. We propose that Kirkendall-diffusion and phase-separation are probably responsible for the formation of SrTiO3/NiFe2O4 PITs, and this work could provide a feasible way to assemble the core/shell structures of different materials.
RESUMO
FeCoCd thin films with 500 nm thickness are directly prepared through electrodeposition in the sulphate bath in which glycine and citric acid were added as complex agents. The composition, structure, and magnetic of FeCoCd films were investigated as a function of Cd2+ concentration, cathode current density, and deposition temperature. A wonderful soft magnetic FeCoCd film was prepared and its coercivity of easy axis and hard axis are 5 Oe and 4 Oe, respectively. The natural resonance frequency is about 3.0 GHz, which imply that the FeCoCd film is potential candidate for high frequency applications.
RESUMO
A new analytical method has been proposed by utilizing an electromagnetic induction principle with a short-circuited microstrip line jig and the complex permeability spectra can be calculated without a known reference sample. The new method using the short-circuited microstrip line can exhibit higher sensitivity and a wider frequency band than coplanar waveguide and pick-up coil. Two magnetic thin films having a good in-plane uniaxial anisotropy are measured by using the induction method. The results show typical complex permeability spectra in good agreement with the theoretical analytical results. The measured permeability values are verified by comparing with the initial susceptibility derived from the sweeping field results. The difference of measured permeability values is less than 5%.