RESUMO
The synthesis as well as the structural and photophysical characterization of two isoleptic bis-cyclometalated Pt(II) and Pd(II) complexes, namely [PtL] and [PdL], bearing a tailored dianionic tetradentate ligand (L2-) are reported. The isostructural character and intermolecular interactions of [PtL] and [PdL] were assessed by NMR spectroscopy and X-ray diffraction analysis. Both complexes show fully ligand-controlled aggregation, demonstrating that a judicious molecular design can tune the photophysical properties. In fact, by introduction of fluorine atoms on defined positions and methoxy groups on complementary sites, metal-metal interactions can be forced by a head-to-tail stacking. Hence, [PtL] shows luminescence from metal-perturbed ligand-centered or from metal-metal-to-ligand charge-transfer triplet states in diluted solutions, in frozen glasses and in crystals, with high photoluminescence quantum yields and long lifetimes in the microsecond range. At room temperature (RT) in concentrated fluid solutions, the palladium analogue [PdL] surprisingly emits luminescence from aggregated species involving supramolecular interactions. Time-resolved photoluminescence and transient absorption spectroscopies demonstrated that ultrafast intersystem crossing occurs for both metals, which outruns any competitive relaxation pathway from the photoexcited singlet state. Furthermore, we demonstrate that the radiationless deactivation can be suppressed in frozen glassy matrices at 77 K and by intermolecular interactions in fluid solutions at RT. In both cases and as indicated by density functional theory calculations, the lowest emissive state acts as an energy trap from which the thermal population of dissociative states with formal occupation of an antibonding Pd-centered 4dx2-y2 orbital is suppressed. This occurs as the energy gap between the emissive and the dark states surpasses kT.
RESUMO
Most photochemistry occurs in the regime of weak light-matter coupling, in which a molecule absorbs a photon and then performs photochemistry from its excited state. In the strong coupling regime, enhanced light-matter interactions between an optical field and multiple molecules lead to collective hybrid light-matter states called polaritons. This strong coupling leads to fundamental changes in the nature of the excited states including multi-molecule delocalized excitations, modified potential energy surfaces, and dramatically altered energy levels relative to non-coupled molecules. The effect of strong light-matter coupling on covalent photochemistry has not been well explored. Photoswitches undergo reversible intramolecular photoreactions that can be readily monitored spectroscopically. In this work, we study the effect of strong light-matter coupling on the kinetics of photoswitching within optical cavities. Reproducing prior experiments, photoswitching of spiropyran/merocyanine photoswitches is decelerated in a cavity. Fulgide photoswitches, however, show the opposite effect, with strong coupling accelerating photoswitching. While modified merocyanine switching can be explained by changes in radiative decay rates or the amount of light in the cavity, modified fulgide switching kinetics suggest direct changes to excited-state reaction kinetics.
RESUMO
Magnesium vanadate (MgV2O6) and its alloys with copper vanadate were synthesized via the solution combustion technique. Phase purity and solid solution formation were confirmed by a variety of experimental techniques, supported by electronic structure simulations based on density functional theory (DFT). Powder X-ray diffraction combined with Rietveld refinement, laser Raman spectroscopy, diffuse reflectance spectroscopy, and high-resolution transmission electron microscopy showed single-phase alloy formation despite the MgV2O6 and CuV2O6 end members exhibiting monoclinic and triclinic crystal systems, respectively. DFT-calculated optical band gaps showed close agreement in the computed optical bandgaps with experimentally derived values. Surface photovoltage spectroscopy, ambient-pressure photoemission spectroscopy, and Kelvin probe contact potential difference (work function) measurements confirmed a systematic variation in the optical bandgap modification and band alignment as a function of stoichiometry in the alloy composition. These data indicated n-type semiconductor behavior for all the samples which was confirmed by photoelectrochemical measurements.
RESUMO
Triplet excited state-initiated photochemistry is a mild and selective route to cycloadditions, radical rearrangements, couplings, fragmentations, and isomerizations. Colloidal quantum dots are proven visible-light photosensitizers and structural scaffolds for triplet-initiated reactions of molecules that are functionalized (with carboxylates) to anchor on the QD surface. Here, with the aid of polyaromatic energy shuttles that act as noncovalent adsorption sites for substrates on the QD surface, the scope of QD-photocatalyzed intermolecular [2 + 2] cycloadditions is extended to freely diffusing substrates (no anchoring groups). QD-shuttle complexes photocatalyze homo- and heterointermolecular [2 + 2] photocycloadditions of benzalacetone, chalcone and its derivatives with up to 94% yield; the yields for all reactions are comparable to those achieved by Ir(ppy)3 but with the advantages of a factor of 2.5 lower catalyst loading, superior stability, and the ability to recover the catalyst by simple centrifugation and reuse it for multiple reaction cycles. Experiments imply a two-step triplet-triplet energy transfer mechanism, one energy transfer from the QD to the energy shuttle followed by a second energy transfer from the shuttle to the transiently adsorbed substrate.
Assuntos
Pontos Quânticos , Alcenos , Reação de Cicloadição , Luz , Fármacos Fotossensibilizantes/químicaRESUMO
Ligands that enable the delocalization of excitons beyond the physical boundary of the inorganic core of semiconductor quantum dots (QDs), called "exciton-delocalizing ligands (EDLs)", offer the opportunity to design QD-based environmental sensors with dynamically responsive optical spectra, because the degree of exciton delocalization depends on the electronic structure of the EDL. This paper demonstrates dynamic, reversible tuning of the optical bandgap of a dispersion of CdSe QDs through the redox states of their 1,3-dimesitylnaphthoquinimidazolylidene N-heterocyclic carbene (nqNHC) ligands. Upon binding of the nqNHC ligands to the QD, the optical bandgap bathochromically shifts by up to 102 meV. Electrochemical reduction of the QD-bound nqNHC ligands shifts the bandgap further by up to 25 meV, a shift that is reversible upon reoxidation.
RESUMO
The nature of the organic cation in two-dimensional (2D) hybrid lead iodide perovskites tailors the structural and technological features of the resultant material. Herein, we present three new homologous series of (100) lead iodide perovskites with the organic cations allylammonium (AA) containing an unsaturated CâC group and iodopropylammonium (IdPA) containing iodine on the organic chain: (AA)2MAn-1PbnI3n+1 (n = 3-4), [(AA)x(IdPA)1-x]2MAn-1PbnI3n+1 (n = 1-4), and (IdPA)2MAn-1PbnI3n+1 (n = 1-4), as well as their perovskite-related substructures. We report the in situ transformation of AA organic layers into IdPA and the incorporation of these cations simultaneously into the 2D perovskite structure. Single-crystal X-ray diffraction shows that (AA)2MA2Pb3I10 crystallizes in the space group P21/c with a unique inorganic layer offset (0, <1/2), comprising the first example of n = 3 halide perovskite with a monoammonium cation that deviates from the Ruddlesden-Popper (RP) halide structure type. (IdPA)2MA2Pb3I10 and the alloyed [(AA)x(IdPA)1-x]2MA2Pb3I10 crystallize in the RP structure, both in space group P21/c. The adjacent I···I interlayer distance in (AA)2MA2Pb3I10 is â¼5.6 Å, drawing the [Pb3I10]4- layers closer together among all reported n = 3 RP lead iodides. (AA)2MA2Pb3I10 presents band-edge absorption and photoluminescence (PL) emission at around 2.0 eV that is slightly red-shifted in comparison to (IdPA)2MA2Pb3I10. The band structure calculations suggest that both (AA)2MA2Pb3I10 and (IdPA)2MA2Pb3I10 have in-plane effective masses around 0.04m0 and 0.08m0, respectively. IdPA cations have a greater dielectric contribution than AA. The excited-state dynamics investigated by transient absorption (TA) spectroscopy reveal a long-lived (â¼100 ps) trap state ensemble with broad-band emission; our evidence suggests that these states appear due to lattice distortions induced by the incorporation of IdPA cations.
RESUMO
Owing to their switchable spin states and dynamic electronic character, organic-based radical species have been invoked in phenomena unique to a variety of fields. When incorporated in solid state materials, generation of organic radicals proves challenging due to aggregation. Metal-organic frameworks (MOFs) are promising candidates for immobilization and stabilization of organic radicals because of the tunable spatial arrangement of organic linkers and metal nodes, which sequesters the reactive species. Herein, a flexible, redox-active tetracarboxylic acid linker bearing two imidazole units was chosen to construct a new Zr6-MOF, NU-910, with scu topology. By exploiting the structural flexibility of NU-910, we successfully modulate the dynamics between an isolated organic radical species and an organic radical π-dimer species in the MOF system. Single-crystal X-ray diffraction analysis reveals that through solvent exchange from N,N-diethylformamide to acetone, NU-910 undergoes a structural contraction with interlinker distances decreasing from 8.32 Å to 3.20 Å at 100 K. Organic radical species on the bridging linkers are generated via UV light irradiation. Direct observation of temperature-induced spin switches from an isolated radical species to a magnetically silent radical π-dimer in NU-910 after irradiation in the solid state was achieved via variable-temperature single-crystal X-ray diffraction and variable-temperature electron paramagnetic resonance spectroscopy. Ultraviolet-visible-near infrared spectroscopy and density functional theory calculations further substantiated the formation of a radical cation π-dimer upon irradiation. This work demonstrates the potential of using flexible MOFs as a platform to modulate radical spin states in the solid phase.
RESUMO
Host-guest 2 : 1 complexation of photoreactive alkene guests improves the selectivity of [2 + 2] photodimerizations by templating alkene orientation prior to irradiation. Host-guest chemistry can also provide 1 : 1 : 1 complexes through the inclusion of electronically complementary donor and acceptor guests, but the photoreactivity of such complexes has not been investigated. We imagined that such complexes could enable selective cross-[2 + 2] photocycloadditions between donor and acceptor stilbenes. In pursuit of this strategy, we investigated a series of stilbenes and found 1 : 1 : 1 complexes with cucurbit[8]uril that exhibited charge-transfer (CT) absorption bands in the visible and near-IR regions. Irradiation of the CT band of an azastilbene, 4,4'-stilbenedicarboxylate, and cucurbit[8]uril ternary complex led to a selective cross-[2 + 2] photocycloaddition, while other substrate pairs exhibited no productive chemistry upon CT excitation. Using transient absorption spectroscopy, we were able to understand the variable photoreactivity of different stilbene donor-acceptor complexes. We found that back electron transfer following CT excitation of the photoreactive complex is positioned deep in the Marcus inverted region due to electrostatic stabilization of the ground state, allowing [2 + 2] to effectively compete with this relaxation pathway. Control reactions revealed that the cucurbit[8]uril host not only serves to template the reaction from the ground state, but also protects the long-lived radical ions formed by CT from side reactions. This protective role of the host suggests that donor-acceptor host-guest ternary complexes could be used to improve existing CT-initiated photochemistry or access new reactivity.
Assuntos
Estilbenos , Alcenos , Transporte de Elétrons , Elétrons , Análise EspectralRESUMO
Colloidal semiconductor nanoplatelets (NPLs) are a scalable materials platform for optoelectronic applications requiring fast and narrow emission, including spin-to-photon transduction within quantum information networks. In particular, three-particle negative trions of NPLs are appealing emitters since, unlike excitons, they do not have an optically "dark" sublevel. In CdSe NPLs, trion emission dominates the photoluminescence (PL) spectrum at low temperature but using them as single photon-emitting states requires more knowledge about their preparation, since trions in these materials are not directly optically accessible from the ground state. This work demonstrates, using power-dependent time-resolved transient absorptions (TA) of CdSe NPLs, that trions form via biexciton decay in 1.6 ps. The scaling of the trion population and formation lifetime with excitation power indicates that they do not form through collisional mechanisms typical for 2D materials, but rather by a unimolecular hole transfer. This work is a step toward deterministic single photon emission from trions.
RESUMO
This paper describes reversible "on-off" switching of the photoluminescence (PL) intensity of CdSe quantum dots (QDs), mediated by photochromic furylfulgide carboxylate (FFC) molecules chemisorbed to the surfaces of the QDs. Repeated cycles of UV and visible illumination switch the FFC between "closed" and "open" isomers. Reversible switching of the QDs' PL intensity by >80% is enabled by different rates and yields of PL-quenching photoinduced electron transfer (PET) from the QDs to the respective isomers. This difference is consistent with cyclic voltammetry measurements and density functional calculations of the isomers' frontier orbital energies. This work demonstrates fatigue-resistant modulation of the PL of a QD-molecule complex through remote control of PET. Such control potentially enables applications, such as all-optical memory, sensing, and imaging, that benefit from a fast, tunable, and reversible response to light stimuli.
RESUMO
Climate change and global energy demands motivate the search for sustainable transformations of carbon dioxide (CO2) to storable liquid fuels. Photocatalysis is a pathway for direct conversion of CO2 to CO, one step within light-powered reaction networks that could, if efficient enough, transform the solar energy conversion landscape. To date, the best performing photocatalytic CO2 reduction systems operate in nonaqueous solvents, but technologically viable solar fuels networks will likely operate in water. Here we demonstrate catalytic photoreduction of CO2 to CO in pure water at pH 6-7 with an unprecedented combination of performance parameters: turnover number (TON(CO)) = 72,484-84,101, quantum yield (QY) = 0.96-3.39%, and selectivity (SCO) > 99%, using CuInS2 colloidal quantum dots (QDs) as photosensitizers and a Co-porphyrin catalyst. At higher catalyst concentration, the system reaches QY = 3.53-5.23%. The performance of the QD-driven system greatly exceeds that of the benchmark aqueous system (926 turnovers with a quantum yield of 0.81% and selectivity of 82%), due primarily to (i) electrostatic attraction of the QD to the catalyst, which promotes fast multielectron delivery and colocalization of protons, CO2, and catalyst at the source of photoelectrons, and (ii) termination of the QD's ligand shell with free amines, which capture CO2 as carbamic acid that serves as a reservoir for CO2, effectively increasing its solubility in water, and lowers the onset potential for catalytic CO2 reduction by the Co-porphyrin. The breakthrough efficiency achieved in this work represents a nonincremental step in the realization of reaction networks for direct solar-to-fuel conversion.
RESUMO
Hybrid halide perovskites consisting of corner-sharing metal halide octahedra and small cuboctahedral cages filled with counter cations have proven to be prominent candidates for many high-performance optoelectronic devices. The stability limits of their three-dimensional perovskite framework are defined by the size range of the cations present in the cages of the structure. In some cases, the stability of the perovskite-type structure can be extended even when the counterions violate the size and shape requirements, as is the case in the so-called "hollow" perovskites. In this work, we engineered a new family of 3D highly defective yet crystalline "hollow" bromide perovskites with general formula (FA)1-x(en)x(Pb)1-0.7x(Br)3-0.4x (FA = formamidinium (FA+), en = ethylenediammonium (en2+), x = 0-0.44). Pair distribution function analysis shed light on the local structural coherence, revealing a wide distribution of Pb-Pb distances in the crystal structure as a consequence of the Pb/Br-deficient nature and en inclusion in the lattice. By manipulating the number of Pb/Br vacancies, we finely tune the optical properties of the pristine FAPbBr3 by blue shifting the band gap from 2.20 to 2.60 eV for the x = 0.42 en sample. A most unexpected outcome was that at x> 0.33 en incorporation, the material exhibits strong broad light emission (1% photoluminescence quantum yield (PLQY)) that is maintained after exposure to air for more than a year. This is the first example of strong broad light emission from a 3D hybrid halide perovskite, demonstrating that meticulous defect engineering is an excellent tool for customizing the optical properties of these semiconductors.
RESUMO
Lattice defects play an important role in determining the optical and electrical properties of monolayer semiconductors such as MoS2. Although the structures of various defects in monolayer MoS2 are well studied, little is known about the nature of the fluorescent defect species and their interaction with molecular adsorbates. In this study, the quenching of the low-temperature defect photoluminescence (PL) in MoS2 is investigated following the deposition of metallophthalocyanines (MPcs). The quenching is found to significantly depend on the identity of the phthalocyanine metal, with the quenching efficiency decreasing in the order CoPc > CuPc > ZnPc, and almost no quenching by metal-free H2Pc is observed. Time-correlated single photon counting (TCSPC) measurements corroborate the observed trend, indicating a decrease in the defect PL lifetime upon MPc adsorption, and the gate voltage-dependent PL reveals the suppression of the defect emission even at large Fermi level shifts. Density functional theory modeling argues that the MPc complexes stabilize dark negatively charged defects over luminescent neutral defects through an electrostatic local gating effect. These results demonstrate the control of defect-based excited-state decay pathways via molecular electronic structure tuning, which has broad implications for the design of mixed-dimensional optoelectronic devices.
RESUMO
ConspectusThe electronic dimensionality of a material is defined by the number of spatial degrees of confinement of its electronic wave function. Low-dimensional semiconductor nanomaterials with at least one degree of spatial confinement have optoelectronic properties that are tunable with size and environment (dielectric and chemical) and are of particular interest for optoelectronic applications such as light detection, light harvesting, and photocatalysis. By combining nanomaterials of differing dimensionalities, mixed-dimensional heterojunctions (MDHJs) exploit the desirable characteristics of their components. For example, the strong optical absorption of zero-dimensional (0D) materials combined with the high charge carrier mobilities of two-dimensional (2D) materials widens the spectral response and enhances the responsivity of mixed-dimensional photodetectors, which has implications for ultrathin, flexible optoelectronic devices. MDHJs are highly sensitive to (i) interfacial chemistry because of large surface area-to-volume ratios and (ii) electric fields, which are incompletely screened because of the ultrathin nature of MDHJs. This sensitivity presents opportunities for control of physical phenomena in MDHJs through chemical modification, optical excitation, externally applied electric fields, and other environmental parameters. Since this fast-moving research area is beginning to pose and answer fundamental questions that underlie the fundamental optoelectronic behavior of MDHJs, it is an opportune time to assess progress and suggest future directions in this field.In this Account, we first outline the characteristic properties, advantages, and challenges for low-dimensional materials, many of which arise as a result of quantum confinement effects. The optoelectronic properties and performance of MDHJs are primarily determined by dynamics of excitons and charge carriers at their interfaces, where these particles tunnel, trap, scatter, and/or recombine on the time scales of tens of femtoseconds to hundreds of nanoseconds. We discuss several photophysical phenomena that deviate from those observed in bulk heterojunctions, as well as factors that can be used to vary, probe, and ultimately control the behavior of excitons and charge carriers in MDHJ systems. We then discuss optoelectronic applications of MDHJs, namely, photodetectors, photovoltaics, and photocatalysts, and identify current performance limits compared to state-of-the-art benchmarks. Finally, we suggest strategies to extend the current understanding of dynamics in MDHJs toward the realization of stimuli-driven responses, particularly with respect to exciton delocalization, quantum emission, interfacial morphology, responsivity to external stimuli, spin selectivity, and usage of chemically reactive materials.
RESUMO
Diastereoselective oxidative coupling of ketones through a silyl bis-enol ether intermediate by anodic and photocatalytic oxidation is reported. These methods provide several 1,4-diketones in good yields without the need for stoichiometric metal oxidants. The strategic use of a silicon tether enables the coupling of both aromatic and aliphatic ketones as well as the synthesis of quaternary centers. Cyclic voltammetry is used to gain insight into the oxidation events of the reaction.
RESUMO
Excitonic energy transfer (EnT) is the mechanism by which natural photosynthetic systems funnel energy from hundreds of antenna pigments to a single reaction center, which allows multielectron redox reactions to proceed with high efficiencies in low-flux natural light. This paper describes the use of electrostatically assembled CdSe quantum dot (QD) aggregates as artificial light harvesting-reaction center units for the photocatalytic reduction of H+ to H2, where excitons are funneled through EnT from sensitizer QDs (sQDs) to catalyst QDs (cQDs). Upon increasing the sensitizer-to-catalyst ratio in the aggregates from 1:2 to 20:1, the number of excitons delivered to each cQD (via EnT) per excitation of the system increases by a factor of nine. At the optimized sensitizer-to-catalyst ratio of 4:1, the internal quantum efficiency (IQE) of the reaction system is 4.0 ± 0.3%, a factor of 13 greater than the IQE of a sample that is identical except that EnT is suppressed due to the relative core sizes of the sQDs and cQDs. A kinetic model supports the proposed exciton funneling mechanism for enhancement of the catalytic activity.
RESUMO
Triplet excited state chemistry has enabled a range of important organic transformations by accessing reaction pathways inaccessible to photoredox chemistry. Such photoreactions are triggered by triplet photosensitizers, which absorb visible-light photons and transfer the energy to the substrate or to a co-catalyst through triplet-triplet energy transfer (TT EnT). The most popular triplet photosensitizers, metal complexes and organic chromophores, have proven useful in a range of pericyclic reactions, bond dissociations, and isomerizations, but they have several characteristics related to their chemical and electronic structure that limit their selectivity, energy efficiency, and sustainability. This Perspective describes some ways that colloidal quantum dots (QDs) address the limitations of molecular photocatalysts for TT EnT-driven organic transformations. These sub-5-nm particles have the large catalytic surface area and electronic/optical tunability of homogeneous catalysts, and the easy separation and surface templating effects of heterogeneous catalysts. Their optical and electronic properties, small singlet-triplet energy splitting, narrow emission line widths, and high photostability enhance their performance as triplet photosensitizers. This Perspective describes these advantages in the context of published and ongoing investigations of TT EnT-driven reactions, and then highlights the advantages and challenges associated with using related emerging materials, specifically lead halide perovskite QDs and quasi-2D nanoplatelets, as photocatalysts for triplet excited state chemistry.
RESUMO
This Article describes the design of a colloidal quantum dot (QD) photosensitizer for the Pd-photocatalyzed Heck coupling of styrene and iodocyclohexane to form 2-cyclohexylstyrene. In the presence of 0.05 mol % CdS QDs, which have an emission spectrum that overlaps the absorption spectrum of a key Pd(II)alkyl iodide intermediate, the reaction proceeds with 82% yield for the Heck product at 0.5 mol % loading of Pd catalyst; no product forms at this loading without a sensitizer. A radical trapping experiment and steady-state and transient optical spectroscopies indicate that the QDs transfer energy to a Pd(II)alkyl iodide intermediate, pushing the reaction toward a Pd(I) alkyl radical species that leads to the Heck coupled product, and suppressing undesired ß-hydride elimination directly from the Pd(II)alkyl iodide. Functionalization of the surfaces of the QDs with isonicotinic acid increases the rate constant of this reaction by a factor of 2.4 by colocalizing the QD and the Pd-complex. The modularity and tunability of the QD core and surface make it a convenient and effective chromophore for this alternative mode of cooperative photocatalysis.
Assuntos
Transferência de Energia , Paládio/química , Processos Fotoquímicos , Compostos de Cádmio/química , Catálise , Fármacos Fotossensibilizantes/química , Pontos Quânticos/química , Sulfetos/químicaRESUMO
Delocalization of excitons within semiconductor quantum dots (QDs) into states at the interface of the inorganic core and organic ligand shell by so-called "exciton-delocalizing ligands (EDLs)" is a promising strategy to enhance coupling of QD excitons with proximate molecules, ions, or other QDs. EDLs thereby enable enhanced rates of charge carrier extraction from, and transport among, QDs and dynamic colorimetric sensing. The application of reported EDLs-which bind to the QDs through thiolates or dithiocarbamates-is however limited by the irreversibility of their binding and their low oxidation potentials, which lead to a high yield of photoluminescence-quenching hole trapping on the EDL. This article describes a new class of EDLs for QDs, 1,3-dimethyl-4,5-disubstituted imidazolylidene N-heterocyclic carbenes (NHCs), where the 4,5-substituents are Me, H, or Cl. Postsynthetic ligand exchange of native oleate capping ligands for NHCs results in a bathochromic shift of the optical band gap of CdSe QDs (R = 1.17 nm) of up to 111 meV while the colloidal stability of the QDs is maintained. This shift is reversible for the MeNHC-capped and HNHC-capped QDs upon protonation of the NHC. The magnitude of exciton delocalization induced by the NHC (after scaling for surface coverage) increases with the increasing acidity of its π system, which depends on the substituent in the 4,5-positions of the imidazolylidene. The NHC-capped QDs maintain photoluminescence quantum yields of up to 4.2 ± 1.8% for shifts of the optical band gap as large as 106 meV.
Assuntos
Compostos Heterocíclicos/química , Metano/análogos & derivados , Pontos Quânticos/química , Ligantes , Luminescência , Metano/químicaRESUMO
Colloidal quantum dots (QDs) have shown promise over the last few decades for a range of applications including single photon emission, in vivo imaging, and photocatalysis. Recent experiments demonstrated that QDs impart stereoselectivity to triplet excited-state [2 + 2] cycloaddition reactions of alkenes photocatalyzed by the QD through self-assembly of the reagent molecules on the QD surface, but these experiments did not reveal the precise geometries of surface-bound molecules or their interactions with surface atoms. Here, a theoretical mechanistic approach is used to study such interactions for [2 + 2] cycloadditions of 4-vinylbenzoic acid derivatives on CdSe QDs. Spin-polarized periodic density functional theory (DFT) and nonperiodic DFT calculations are deployed to determine the origin of the selectivity for the syn diastereomer of the resultant tetrasubstituted cyclobutane product via atomistic modeling of the CdSe surface and substrates, determination of the thermodynamic energies of reactions for each step, the intermolecular interactions between the substrates, and the triplet state reaction paths. The calculations indicate that reaction selectivity arises from preferred binding of pairs through intermolecular interactions of substrate molecules on the QD surface in a syn-precursor structure followed by dimerization after triplet excitation. These mechanisms are generalizable to other metal-enriched QD surfaces that have a similar surface structure as that of CdSe, such as InSe or CdTe. Design principles for anti diastereomer derivatives are also discussed.