RESUMO
The structural transformation of metal-organic frameworks (MOFs) has attracted increasing interests, which has not only produced various new structures but also served as a fantastic platform for MOF-based kinetic analysis. Multiple reaction conditions have been documented to cause structural transformation; nevertheless, central metal-induced topological alteration of MOFs is rare. Herein, we reported a structural transformation of a 2D layered Cd-MOF driven by Cd(II) ions. After being submerged in the aqueous solution of cadmium nitrate, the twofold interpenetrated 2D network of [Cd(hsb-2)(bdc)·5H2O]n [HSB-W10; bdc: 1,4-benzenedicarboxylate; hsb-2:1,2-bis(4'-pyridylmethylamino)-ethane] was converted into a novel noninterpenetrated 2D network [Cd1.5(hsb-2)(bdc)1.5(H2O)2·H2O]n (HSB-W16). This partial dissolution-recrystallization process was investigated by integrating controlled experiments, 1H NMR spectra, and photographic tracking analysis. Furthermore, a novel strategy combining in situ multicomponent dye encapsulation and central metal-triggered structural transformation was developed for the fabrication of MOF materials with white-light emission. By adopting this strategy, different dye guest molecules were concurrently introduced into the HSB-W16 host matrix, leading to a range of white-light-emitting MOF composites. This work will enable detailed studies of solid-state transformations and demonstrate a promising application prospect for structural transformation.
RESUMO
Mixed-valence compounds with the iso-cyanidometal-ligand bridge in different oxidation states are used as models for the investigation of the electron-transfer process. We synthesized a series of trimetallic isocyanidometal-bridged compounds with [Fe-CN-Ru-NC-Fe]n+ (n=2-4), in which the one-electron oxidation product (N3+ ) and two-electron oxidation product (N4+ ) compounds possess an isocyanidometal bridge whose energy is, respectively lower and slightly higher than the terminal metal centers energies. For the N3+ compounds, the bridge state (FeII -RuIII -FeII ) and mixed-valence states (FeIII -RuII -FeII or FeII -RuII -FeIII ) could be simultaneously observed on the IR timescale. For the N4+ compounds, as the donor becomes stronger the electron transfer bridge excited state (FeIII -RuII -FeIII ) becomes more and more stable, and even becomes ground state due to the strong electronic coupling between Fe and Ru.
RESUMO
An unusual tetra-nuclear linear cyanido-bridged complex [Ru2 (µ-ap)4 -CN-Ru2 (µ-ap)4 ](BPh4 ) (1) (ap=2-anilinopyridinate) has been synthesized and well characterized. The crystallographic data, magnetic measurement, IR, EPR and theoretical calculation results demonstrate that complex 1 is the first example of mixed spin Ru2 5+ -based complex with uncommon electronic configurations of S=1/2 for the cyanido-C bound Ru2 5+ and S=3/2 for the cyanido-N bound Ru2 5+ . This phenomenon can be understood by the theoretical calculation results that from the precursor Ru2 (µ-ap)4 (CN) (S=3/2) to complex 1 the energy gap between π* and δ* orbitals of the cyanido-C bound Ru2 5+ core increases from 0.57 to 1.61â eV due to the enhancement of asymmetrical π back-bonding effect, but that of the cyanido-N bound Ru2 5+ core is essential identical (0.56â eV). Besides, the analysis of UV/Vis-NIR spectra suggests that there exists metal to metal charge transfer (MMCT) from the cyanido-N bound Ru2 5+ (S=3/2) to the cyanido-C bound Ru2 5+ (S=1/2), supported by the TDDFT calculations.
RESUMO
The two stable pairs of trimetallic compounds trans-[Cp*(dppe)Ru(µ-NC)Ru(dmap)4 (µ-CN)Ru(dppe)Cp*][PF6 ]n (1[PF6 ]n , n=2, 3; Cp*=1,2,3,4,5-pentamethylcyclopentadiene; dppe=1,2-bis-(diphenylphosphino)ethane; dmap= 4-dimethylaminopyridine) and trans-[Cp*(dppe)Ru(µ-CN)Ru(dmap)4 (µ-NC)Ru(dppe)Cp*][PF6 ]n (2[PF6 ]n , n=2, 3), which demonstrate cyanide/isocyanide isomerism, have been synthesized and fully characterized. 13+ [PF6 ]3 and 23+ [PF6 ]3 are the one-electron oxidation products of 12+ [PF6 ]2 and 22+ [PF6 ]2 , respectively. The results suggest that 1[PF6 ]3 is a classâ III mixed valence compound, whereas 2[PF6 ]3 might be an unusually symmetrical classâ II-III mixed valence compound composed of the two asymmetrical delocalized RuIII -NC-RuII mixed valence subunits.
RESUMO
Enantioseparation is an integral process in the pharmaceutical industry, considering the ever-increasing demand for chiral medicine products. As a new material, porous metal-organic frameworks (MOFs) have shown their potential application in this field because their structures are easy to adjust and control. Though chiral recognition between racemic substrates and frameworks has made preliminary progress, discussions of their size-matching effects are rare. Herein with the help of channel-tunable homochiral MOFs (HMOFs), diols of different sizes have been separated in good enantiomeric excess (ee%). In addition, the ee% reaches 67.4% for the first time for diols as large as 1,1,2-triphenyl-1,2-ethanediol, which turns out to be the most effective value so far.
Assuntos
Álcoois/química , Estruturas Metalorgânicas/química , Estrutura Molecular , Tamanho da Partícula , Porosidade , Estereoisomerismo , Propriedades de SuperfícieRESUMO
The pores/channels of porous 3D metal-organic frameworks (MOFs) have been widely applied to incorporate gas, solvent, or organic molecules. On the contrary, the utilization of the interlamellar void of layered metal-organic complexes (MOCs) remains underappreciated, although it is more flexible and available to accommodate molecules with different sizes. In this work, diverse sulfonates have been intercalated purposely into an identical layered MOC, which constructed various novel intercalation compounds possessing fluorescent, white-light emitting, photochromic, homochiral, or nonlinear optical (NLO) properties. With the help of single-crystal X-ray diffraction, their structures and the mutual interactions between the MOC host and the sulfonate guests were characterized. The properties of the guest molecules were tuned and meanwhile some new performances were generated after confining them into the interlayer region. Such a hybrid approach provides an efficient strategy to design and prepare multifunctional materials.
RESUMO
A new mixed-ligand metal-organic framework (MOF), ZnATZ-BTB, has been constructed as a luminescent ratiometric thermometer by making use of the intrinsic dual emission at cryogenic temperatures. Its twofold interpenetrated network promotes the Dexter energy transfer (DET) between the mixed organic lumophores. The temperature-dependent luminescent behavior arises from the thermal equilibrium between two separated excited states coupled by DET, which is confirmed by Boltzmann distribution fitting. The small excited-state energy gap allows ZnATZ-BTB to measure and visualize cryogenic temperatures (30-130 K) with significantly high relative sensitivity (up to 5.29% K(-1) at 30 K). Moreover, it is the first example of a ratiometric MOF thermometer the dual emitting sources of which are widely applicable mixed organic ligands, opening up new opportunities for designing such devices.
RESUMO
A mixture of 2D and 1D metal-organic complexes, [ZnL(H2O)2·G1·DEF·2H2O]n (1a: G1 = naphthalene-2,7-disulfonate; DEF = N,N-diethylformamide) and [ZnL(H2O)3·G1·DEF·2H2O]n (2), has been prepared from a hydrogenated Schiff base L and Zn(II) in a DEF-contained solvent system under mild conditions. The yields of 1a and 2 are equivalent; however, they can be tuned by varying the amount of DEF solvent. Increasing the use of DEF tends to form pure 1a, while decreasing it generates 2. Without DEF, another novel 3D four-connected CdSO4 (cds) framework [ZnL(H2O)2·G1·2H2O]n (3) composed of alternated right-handed and left-handed helical chains has been constructed. The amount of DEF solvent has a significant impact on the diverse coordination architectures of 1-3, which is rare in the preparation of metal-organic complexes. The photoluminescence of complexes 1-3 along with naphthalene-2,7-disulfonate has been investigated in the solid state. The luminescent emission of G1 was enhanced greatly after being confined into metal-organic networks. In addition, complexes 1-3 display second-harmonic generation efficiencies, which are approximately 0.58, 0.42, 0.32, and 0.52 times as much as that of potassium dihydrogen phosphate.
RESUMO
Utilizing the mixed-ligand strategy, a novel fourfold-interpenetrated 3D homochiral metal-organic framework (1) with rare pair quadruple-stranded helices was assembled from bpee (1,2-bis(4-pyridyl)ethylene) and NCG (N-carbamyl-l-glutamate). Changing the carbamyl substituent of NCG with benzoyl group (NBzG: N-benzoyl-l-glutamate), a non-interpenetrated 3D homochiral coordination polymer (2) composed of alternate right-handed and left-handed single helix was obtained. When p-tolylsulfonyl substituent was used instead, an interesting homochiral linear structure (3) was formed from mixed-ligand bpee and NTsG (N-p-tolylsulfonyl-l-glutamate), with all individual NTsG being lined up orderly. The steric hindrance of N-substituent of l-glu has a tremendous impact on the construction of these diverse frameworks. Complexes 1-3 display second harmonic generation (SHG) efficiencies, which are approximately 0.32, 0.45, and 0.55 times as much as that of KDP powder.
Assuntos
Complexos de Coordenação/química , Etano/análogos & derivados , Glutamatos/química , Piridinas/química , Zinco/química , Complexos de Coordenação/síntese química , Etano/química , Ligantes , Modelos Moleculares , Estrutura MolecularRESUMO
To investigate how the central metalloligand geometry influences distant or vicinal metal-to-metal charge-transfer (MMCT) properties of polynuclear complexes, cis- and trans-isomeric heterotrimetallic complexes, and their one- and two-electron oxidation products, cis/trans-[Cp(dppe)Fe(II)NCRu(II)(phen)2CN-Fe(II)(dppe)Cp][PF6]2 (cis/trans-1[PF6]2), cis/trans-[Cp(dppe)Fe(II)NCRu(II)(phen)2CNFe(III)-(dppe)Cp][PF6]3 (cis/trans-1[PF6]3) and cis/trans-[Cp(dppe)Fe(III)NCRu(II)(phen)2CN-Fe(III)(dppe)Cp][PF6]4 (cis/trans-1[PF6]4) have been synthesized and characterized. Electrochemical measurements show the presence of electronic interactions between the two external Fe(II)â atoms of the cis- and trans-isomeric complexes cis/trans-1[PF6]2. The electronic properties of all these complexes were studied and compared by spectroscopic techniques and TDDFT//DFT calculations. As expected, both mixed valence complexes cis/trans-1[PF6]3 exhibited different strong absorption signals in the NIR region, which should mainly be attributed to a transition from an MO that is delocalized over the Ru(II)-CN-Fe(II) subunit to a Fe(III) dâ orbital with some contributions from the co-ligands. Moreover, the NIR transition energy in trans-1[PF6]3 is lower than that in cis-1[PF6]3, which is related to the symmetry of their molecular orbitals on the basis of the molecular orbital analysis. Also, the electronic spectra of the two-electron oxidized complexes show that trans-1[PF6]4 possesses lower vicinal Ru(II) â Fe(III) MMCT transition energy than cis-1[PF6]4. Moreover, the assignment of MMCT transition of the oxidized products and the differences of the electronic properties between the cis and trans complexes can be well rationalized using TDDFT//DFT calculations.
Assuntos
Complexos de Coordenação/síntese química , Cianetos/química , Compostos Ferrosos/química , Rutênio/química , Complexos de Coordenação/química , Cristalografia por Raios X , Técnicas Eletroquímicas , Espectroscopia de Ressonância de Spin Eletrônica , Isomerismo , Conformação Molecular , Teoria Quântica , Espectrofotometria InfravermelhoRESUMO
The microporous metal-organic framework (MMOF) Zn4O(L1)2â 9 DMFâ 9 H2O (1-H) and its functionalized derivatives Zn4O(L1-CH3)2â 9 DMFâ 9 H2O (2-CH3) and Zn4O(L1-Cl)2â 9 DMFâ 9 H2O (3-Cl) have been synthesized and characterized (H3L1=4-[N,N-bis(4-methylbenzoic acid)amino]benzoic acid, H3L1-CH3=4-[N,N-bis(4-methylbenzoic acid)amino]-2-methylbenzoic acid, H3L1-Cl=4-[N,N-bis(4-methylbenzoic acid)amino]-2-chlorobenzoic acid). Single-crystal X-ray diffraction analyses confirmed that the two functionalized MMOFs are isostructural to their parent MMOF, and are twofold interpenetrated three-dimensional (3D) microporous frameworks. All of the samples possess enduring porosity with Langmuir surface areas over 1950â cm(2) g(-1). Their pore volumes and surface areas decrease in the order 1-H>2-CH3 >3-Cl. Gas-adsorption studies show that the H2 uptakes of these samples are among the highest of the MMOFs (2.37â wt% for 3-Cl at 77â K and 1â bar), although their structures are interpenetrating. Furthermore, this work reveals that the adsorbate-adsorbent interaction plays a more important role in the gas-adsorption properties of these samples at low pressure, whereas the effects of the pore volumes and surface areas dominate the gas-adsorption properties at high pressure.
RESUMO
Metal-organic frameworks (MOFs) have been extensively studied in host-guest chemistry by means of ultrahigh porosities, tunable channels, and component diversities. As the host matrix, MOFs exhibit immense potential in the preparation of single-phase white light-emitting (SPWLE) materials. Nonetheless, it is a great challenge that the size of the introduced guest molecules is limited by MOF pores, which affects the WLE optimization. In this work, two-dimensional (2D) MOFs are first utilized as the host matrices to simultaneously encapsulate red-green-blue fluorescent dyes for SPWLE. Various dyes@2D MOF composites with high-quality WLE performances and ultrathin nanosheet morphologies are directly assembled from 2D MOF precursors and dyes in high yields. Owing to the flexible interlamellar space of 2D MOFs, different types and sizes of guests can be easily introduced, which greatly expands the range of available MOF hosts and guests, making the WLE much more tunable. The strategy of employing 2D MOFs as the host matrices to introduce multicomponent dyes for SPWLE nanosheets resolves the restriction of MOF pores on the guest molecule size and opens a new avenue to rationally design and prepare SPWLE nanosheets that are highly solution-processable.
RESUMO
The diruthenium-based linear mixed valence complex trans-[Ru2(ap)4-NC-Ru(DMAP)4-CN-Ru2(ap)4][PF6]2 (12+[PF6]2) (ap = 2-anilinopyridinate, DMAP = 4-dimethylaminopyridine) and its two-electron oxidation product 14+[PF6]4 have been synthesized and fully characterized. The investigation reveals that complex 12+ displays a single MMCT transition, whereas complex 14+ has three identified MMCT transitions (MMCT-1, MMCT-2 and MMCT-3) upon oxidation. Interestingly, MMCT-2 in complex 14+ might result from the transition from the RuIII-NC-RuII-CN-RuIII component, which is composed of the central RuII and its two neighboring RuIII atoms from the cluster RuVI2 units, to both the terminal RuIII atoms of the same cluster RuVI2 units, which is supported by the TDDFT calculations.
RESUMO
A novel coordination tailoring top-down delamination strategy involving the controllable partial disassembly of water-labile 3D MOFs has been explored to fabricate ultrathin 2D MOF nanosheets, and it exhibits many advantages such as green, convenience and high efficiency. Accordingly, 2D ultrathin MOF nanosheets with a two-fold interpenetrated architecture have been rapidly obtained from a 3D pillar-layered MOF, and they show distinguished fluorescence responses to different solvents.
RESUMO
To investigate MMCT excited states of MV complexes, two symmetrical tetranuclear cyanido-bridged localized MV complexes RuIICNRuIII,III2NCRuII have been designed and synthesized. The ultrafast time-resolved transient absorption (TA) spectroscopy experiment reveals that the MMCT rate of 1 and 2 is 0.18 × 1014 s-1 (τ = 5.7 × 10-14 s) and 0.29 × 1013 s-1 (τ = 3.46 × 10-13 s), respectively, which suggests that the MMCT rate or the lifetime of the MMCT excited state may be controlled by a slight change of the substituent group on the metal center.
RESUMO
A trinuclear cyanide-bridged luminescent compound, trans-RuII(DMAP)4(CN)2[(PY5Me2)Mn]2[PF6]4 (1-R), and its oxidation product, ferromagnetic trans-RuIII(DMAP)4(CN)2[(PY5Me2)Mn]2-[PF6]5 (1-O), were synthesized and fully characterized. This is the first example of a molecular material showing a redox-controlled transformation between fluorescence and ferromagnetism.
RESUMO
A new one-dimensional cyanide-bridged complex [MnIII(salphen)RuII(DMAP)4(CN)2](PF6) (1) and its oxidized derivative [MnIII(salphen)RuIII(DMAP)4(CN)2](PF6)2 (2) have been synthesized and fully characterized. Magnetic measurements showed that 1 shows simple paramagnetism but 2 shows intrachain ferromagnetic interaction with slow magnetic relaxation.
RESUMO
The first example of discrete small molecular compounds with different magnetic anisotropy induced by solvent molecules, benzoquinone-bridged Co2 complexes, [(TPyA)2Co2(L)]·solvent (L = 2,5-dibromo-3,6-dihydroxy-1,4-benzoquinone, solvent = CH3CN and H2O), has been prepared and fully characterized.
RESUMO
A new 1D cyanide-bridged Co-Ru compound, {[trans-RuIII(dmap)4(CN)2Co(dipic)(MeOH)](PF6)}n (1a) (dmap = 4-dimethylaminopyridine, dipic = pyridine-2,6-dicarboxylate), and its reduced state, [trans-RuII(dmap)4(CN)2Co(dipic)]n (1b) have been synthesized. Upon the Ru center reduction from iii to ii, the MeOH solvent molecule bound to Co(ii) in 1a is expelled. 1a displays ferrimagnetic properties but 1b is only a paramagnetic compound.
RESUMO
The unique features of the metal-organic frameworks (MOFs), including ultrahigh porosities and surface areas, tunable pores, endow the MOFs with special utilizations as host matrices. In this work, various neutral and ionic guest dye molecules, such as fluorescent brighteners, coumarin derivatives, 4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM), and 4-(p-dimethylaminostyryl)-1-methylpyridinium (DSM), are encapsulated in a neutral MOF, yielding novel blue-, green-, and red-phosphors, respectively. Furthermore, this study introduces the red-, green-, and blue-emitting dyes into a MOF together for the first time, producing white-light materials with nearly ideal Commission International ed'Eclairage (CIE) coordinates, high color-rendering index values (up to 92%) and quantum yields (up to 26%), and moderate correlated color temperature values. The white light is tunable by changing the content or type of the three dye guests, or the excitation wavelength. Significantly, the introduction of blue-emitting guests in the methodology makes the available MOF host more extensive, and the final white-light output more tunable and high-quality. Such strategy can be widely adopted to design and prepare white-light-emitting materials.