RESUMO
Recent advances in gene editing are enabling the engineering of cells with an unprecedented level of scale. To capitalize on this opportunity, new methods are needed to accelerate the different steps required to manufacture and handle engineered cells. Here, we describe the development of an integrated software and hardware platform to automate Fluorescence-Activated Cell Sorting (FACS), a central step for the selection of cells displaying desired molecular attributes. Sorting large numbers of samples is laborious, and, to date, no automated system exists to sequentially manage FACS samples, likely owing to the need to tailor sorting conditions ("gating") to each individual sample. Our platform is built around a commercial instrument and integrates the handling and transfer of samples to and from the instrument, autonomous control of the instrument's software, and the algorithmic generation of sorting gates, resulting in walkaway functionality. Automation eliminates operator errors, standardizes gating conditions by eliminating operator-to-operator variations, and reduces hands-on labor by 93%. Moreover, our strategy for automating the operation of a commercial instrument control software in the absence of an Application Program Interface (API) exemplifies a universal solution for other instruments that lack an API. Our software and hardware designs are fully open-source and include step-by-step build documentation to contribute to a growing open ecosystem of tools for high-throughput cell biology.
Assuntos
Software , Automação , Citometria de Fluxo/métodosRESUMO
Luminescence is ubiquitous in biology research and medicine. Conceptually simple, the detection of luminescence nonetheless faces technical challenges because relevant signals can exhibit exceptionally low radiant power densities. Although low light detection is well-established in centralized laboratory settings, the cost, size, and environmental requirements of high-performance benchtop luminometers are not compatible with geographically-distributed global health studies or resource-constrained settings. Here we present the design and application of a ~$700 US handheld, battery-powered luminometer with performance on par with high-end benchtop instruments. By pairing robust and inexpensive Silicon Photomultiplier (SiPM) sensors with a low-profile shutter system, our design compensates for sensor non-idealities and thermal drift, achieving a limit of detection of 1.6E-19 moles of firefly luciferase. Using these devices, we performed two pilot cross-sectional serology studies to assess sars-cov-2 antibody levels: a cohort in the United States, as well as a field study in Bangladesh. Results from both studies were consistent with previous work and demonstrate the device's suitability for distributed applications in global health.
RESUMO
The ability of two, scattering gold nanoparticles (GNPs) to plasmonically couple in a manner that is dependent on the interparticle separation has been exploited to measure nanometer-level displacements. However, despite broad applicability to monitoring biophysical dynamics, the long time scales (<5 Hz) with which plasmonic coupling are typically measured are not suitable for many dynamic molecular processes, generally occurring over several milliseconds. Here, we introduce a new technique intended to overcome this technical limitation: ratiometric analysis using monochromatic, evanescent darkfield illumination (RAMEDI). As a proof-of-principle, we monitored dynamic, plasmonic coupling arising from the binding of single biotin- and neutravidin-GNPs with a temporal resolution of 38 ms. We also show that the observable bandwidth is extendable to faster time scales by demonstrating that RAMEDI is capable of achieving a signal-to-noise ratio greater than 20 from individual GNPs observed with 200 Hz bandwidth.
Assuntos
Lasers , Nanopartículas Metálicas/química , Espalhamento de Radiação , Avidina/química , Biotina/química , Cor , Transferência Ressonante de Energia de Fluorescência , LuzRESUMO
Magnetic tweezers are powerful tools to manipulate and study the mechanical properties of biological molecules and living cells. In this paper we present a novel, bona fide electromagnetic tweezer (EMT) setup that allows independent control of the force and torque applied via micrometer-sized magnetic beads to a molecule under study. We implemented this EMT by combining a single solenoid that generates force (f-EMT) with a set of four solenoids arranged into a symmetric quadrupole to generate torque (τ-EMT). To demonstrate the capability of the tweezers, we attached optically asymmetric Janus beads to single, tethered DNA molecules. We show that tension in the piconewton force range can be applied to single DNA molecules and the molecule can simultaneously be twisted with torques in the piconewton-nanometer range. Furthermore, the EMT allows the two components to be independently controlled. At various force levels applied to the Janus bead, the trap torsional stiffness can be continuously changed simply by varying the current magnitude applied to the τ-EMT. The flexible and independent control of force and torque by the EMT makes it an ideal tool for a range of measurements where tensional and torsional properties need to be studied simultaneously on a molecular or cellular level.
Assuntos
DNA/química , Campos Eletromagnéticos , Modelos Teóricos , TorqueRESUMO
Biomolecular motors are central to the function and regulation of all cellular transport systems. The molecular mechanisms by which motors generate force and motion along cytoskeletal filaments have been mostly studied in vitro using a variety of approaches, including several single-molecule techniques. While such studies have revealed significant insights into the chemomechanical transduction mechanisms of motors, important questions remain unanswered as to how motors work in cells. To understand how motor activity is regulated and how motors orchestrate the transport of specific cargoes to the proper subcellular domain requires analysis of motor function in vivo. Many transport processes in cells are believed to be powered by single or very few motor molecules, which makes it essential to track, in real time and with nanometer resolution, individual motors and their associated cargoes and tracks. Here we summarize, contrast, and compare recent methodological advances, many relying on advanced fluorescent labeling, genetic tagging, and imaging techniques, that lay the foundation for groundbreaking approaches and discoveries. In addition, to illustrate the impact and capabilities for these methods, we highlight novel biological findings where appropriate.