Depletion-Induced Flocculation of Concentrated Emulsions Probed by Photon Density Wave Spectroscopy.

Stable, creaming-free oil in water emulsions with high volume fractions of oil (ϕ = 0.05-0.40, density matched to water) and polysorbate 80 as an emulsifier were characterized without dilution by Photon Density Wave spectroscopy measuring light absorption and scattering behavior, the latter serving as the basis for droplet size distribution analysis. The emulsion with ϕ = 0.10 was used to investigate flocculation processes induced by xanthan as a semi-flexible linear nonabsorbing polymer. Different time regimes in the development of the reduced scattering coefficient µs' could be identified. First, a rapid, temperature-dependent change in µs' during the depletion process was observed. Second, the further decrease of µs' follows a power law in analogy to a spinodal demixing behavior, as described by the Cahn-Hilliard theory.

The Dynamics of Gastric Emptying and Self-Reported Feelings of Satiation Are Better Predictors Than Gastrointestinal Hormones of the Effects of Lipid Emulsion Structure on Fat Digestion in Healthy Adults-A Bayesian Inference Approach.

Background: Limited information exists on the relation between fat emulsion structure and its effect on the release of gastrointestinal hormones and feelings of satiation.Objective: We investigated the impact of fat emulsion droplet size, gravitational and acid stability, and redispersibility on gastrointestinal responses and sought to deduce the relative importance of the hormones ghrelin, cholecystokinin, glucagon-like peptide-1, and peptide YY (PYY) in controlling fat emptying and related satiation.Methods: Within a randomized, double-blind, 4-armed crossover study, an extensive data set was generated by MRI of gastric function, analysis of hormone profiles, and ratings of satiation in healthy participants [10 women and 7 men with a mean ± SD age of 25 ± 7 y and body mass index (in kg/m2) of 22 ± 1] after intake of 4 different fat emulsions. Iterative Bayesian model averaging variable selection was used to investigate the influence of hormone profiles in controlling fat emulsion emptying and satiation.Results: The emulsion structure had a distinct effect on the gastric emptying (primary outcome), gastrointestinal hormone profiles, and ratings of satiation (secondary outcomes). Gravitational and acid stability were stronger modulators of fat emptying and hormone profiles than were emulsion droplet size or redispersibility. Cholecystokinin and PYY were most strongly affected by fat emulsion instability and droplet size. Although both hormones were relevant predictors of gastric emptying, only PYY was identified as a relevant predictor of satiation.Conclusions: This work indicates that evenly dispersed, stable, small-emulsion droplets within the stomach lead to prolonged gastric distension, longer ghrelin suppression, and accelerated fat sensing (cholecystokinin and PPY), triggering prolonged feelings of satiation. It suggests that the effects of emulsion instability and droplet size on energy consumption are best studied by assessing changes in gastric emptying and ratings of satiation rather than changes in venous hormone profiles. This trial was registered at clinicaltrials.gov as NCT01253005.

Impact of microemulsion inspired approaches on the formation and destabilisation mechanisms of triglyceride nanoemulsions.

Even after 30+ years of research, there are still few examples of physically stable transparent nanoemulsions despite their high potential to revolutionise pharmaceutical, personal care, and food products. In this study, we examine how low-energy "microemulsion inspired" (co-solvent/co-surfactant) approaches impact the formation and destabilisation mechanisms of homogenised triglyceride nanoemulsions. The addition of n-alcohol co-solvents and Span 80 co-surfactants had two effects on nanoemulsion droplet diameter; a beneficial one that reduced droplet diameter from 120 to 50 nm and a deleterious one that caused destabilisation. The decrease in nanoemulsion droplet diameter facilitated by n-alcohols is thought to arise from changes in: (i) solvent quality near the interface and (ii) interface spontaneous curvature which dramatically reduce interfacial tension. The strength of this effect was magnified by n-alcohol partitioning behaviour and their tendency to associate with the headgroup of POE surfactants. Addition of an excess of n-alcohol led to nanoemulsion destabilisation, unusually for nanoemulsions, destabilisation was not via Ostwald ripening, instead coalescence was found to be the primary destabilisation mechanism. A rapid increase in nanoemulsion droplet growth rate with increasing n-alcohol content was observed for each n-alcohol. Such rapid changes in nanoemulsion instability with composition are reminiscent of PIC/PIT emulsions in the Winsor III region, whose instability has been described to be a function of the activation energy barrier to coalescence. The microemulsion inspired approaches developed in this work highlight a new general approach to the creation of transparent nanoemulsions, and are particularly advantageous for triglyceride oils which are inherently stable against Ostwald ripening.

Novel oral microscope gives mechanistic insights into colloidal drivers of friction in oral biofilms.

Texture and mouthfeel are central to the sensory enjoyment of food and beverages. Yet our incomplete understanding of how food boluses are transformed in the mouth limits our texture prediction ability. As well as thin film tribology, the interaction of food colloids with the oral tissue and salivary biofilms plays a key role in texture perception via mechanoreceptors in the papillae. In this study we describe the development of an oral microscope capable of quantitative characterization of the inactions of food colloids with papillae and their concurrent saliva biofilm. We also highlight how the oral microscope revealed key microstructural drivers of several topical phenomena (oral residue formation, coalescence in-mouth, grittiness of protein aggregates and finally microstructural origin of polyphenol astringency) in the domain of texture creation. The coupling of a fluorescent food grade dye with image analysis enabled specific and quantitative determination of the microstructural changes in mouth. Emulsions either underwent no aggregation, small aggregation, or extensive aggregation depending on whether their surface charge facilitated complexation with the saliva biofilm. Quite surprisingly cationic gelatin emulsions that were already aggregated with saliva in mouth underwent coalescence if subsequently exposed to tea polyphenols (EGCG). Large protein aggregates were found to aggregate with the saliva coated papillae, increasing their size tenfold and possibly explaining why there are perceived as gritty. An exciting observation was the oral microstructural changes that occurred upon exposure to tea polyphenols (EGCG). Filiform papillae shrunk, and the saliva biofilm was seen to precipitate/collapse, exposing a very rough tissue surface. These tentative early steps are the first in vivo microstructural insights into the different food oral transformations that are drivers of key texture sensation.

Conformational changes of α-lactalbumin adsorbed at oil-water interfaces: interplay between protein structure and emulsion stability.

The conformation and structural dimensions of α-lactalbumin (α-La) both in solution and adsorbed at oil-water interfaces of emulsions were investigated using synchrotron radiation circular dichroism (SRCD) spectroscopy, front-face tryptophan fluorescence (FFTF) spectroscopy, and dual polarization interferometry (DPI). The near-UV SRCD and the FFTF results demonstrated that the hydrophobic environment of the aromatic residues located in the hydrophobic core of native α-La was significantly altered upon adsorption, indicating the unfolding of the hydrophobic core of α-La upon adsorption. The far-UV SRCD results showed that adsorption of α-La at oil-water interfaces created a new non-native secondary structure that was more stable to thermally induced conformational changes. Specifically, the α-helical conformation increased from 29.9% in solution to 45.8% at the tricaprylin-water interface and to 58.5% at the hexadecane-water interface. However, the ß-sheet structure decreased from 18.0% in solution to less than 10% at both oil-water interfaces. The DPI study showed that adsorption of α-La to a hydrophobic C18-water surface caused a change in the dimensions of α-La from the native globule-like shape (2.5-3.7 nm) to a compact/dense layer approximately 1.1 nm thick. Analysis of the colloidal stability of α-La stabilized emulsions showed that these emulsions were physically stable against droplet flocculation at elevated temperatures both in the absence and in the presence of 120 mM NaCl. In the absence of salt, the thermal stability of emulsions was due to the strong electrostatic repulsion provided by the adsorbed α-La layer, which was formed after the adsorption and structural rearrangement. In the presence of salt, although the electrostatic repulsion was reduced via electrostatic screening, heating did not induce strong and permanent droplet flocculation. The thermal stability of α-La stabilized emulsions in the presence of salt is a combined effect of the electrostatic repulsion and the lack of covalent disulfide interchange reactions. This study reports new information on the secondary and tertiary structural changes of α-La upon adsorption to oil-water interfaces. It also presents new results on the physical stability of α-La stabilized emulsions during heating and at moderate ionic strength (120 mM NaCl). The results broaden our understanding of the factors controlling protein structural change at emulsion interfaces and how this affects emulsion stability.

Directed Discovery of Tetrapeptide Emulsifiers.

Oil in water emulsions are an important class of soft material that are used in the food, cosmetic, and biomedical industries. These materials are formed through the use of emulsifiers that are able to stabilize oil droplets in water. Historically emulsifiers have been developed from lipids or from large biomolecules such as proteins. However, the ability to use short peptides, which have favorable degradability and toxicity profiles is seen as an attractive alternative. In this work, we demonstrate that it is possible to design emulsifiers from short (tetra) peptides that have tunability (i.e., the surface activity of the emulsion can be tuned according to the peptide primary sequence). This design process is achieved by applying coarse grain molecular dynamics simulation to consecutively reduce the molecular search space from the 83,521 candidates initially considered in the screen to four top ranking candidates that were then studied experimentally. The results of the experimental study correspond well to the predicted results from the computational screening verifying the potential of this screening methodology to be applied to a range of different molecular systems.

Colloidal dynamics of emulsion droplets in mouth.

The interaction of emulsions with the tongue is key to the sensory appeal of food and can potentially be exploited for oral/buccal pharmaceutical delivery. Whilst there is good understanding of the different mucoadhesive forces governing emulsion interaction with the tongue, their relative importance is not well understood. In addition, the physical location of emulsions within the saliva papillae on the tongue is not understood at all. A combination of ex vivo salivary film, and in vivo oral coating experiments were used to determine the importance of different mucoadhesive forces. Mucoadhesion of cationic emulsions was largely driven by electrostatic complexation. SDS-PAGE of the in vivo saliva coating highlighted that mucins were largely responsible for cationic emulsion mucoadhesion. Anionic emulsions were bound via hydrophobic/steric interactions to small salivary proteins typically located away from the mucin anchor points. The physical location and clustering of emulsions relative to the salivary film/papillae was probed via the invention of a fluorescent oral microscope. Cationic emulsions were densely clustered close to the papillae whilst anionic emulsions were suspended in the salivary film above the papillae. Interestingly, non-ionic emulsions were also trapped within the salivary film above the papillae as individual droplets. These findings highlight that whilst electrostatic complexation with saliva is a powerful mucoadhesive force, hydrophobic and steric interactions also act to induce oral retention of emulsions. The differences in physical location and clustering of emulsions within the salivary film hint at the 3D locations of the different salivary proteins driving each mucoadhesive interaction. This novel understanding of emulsion saliva/papillae interactions has potential to aid efficacy of buccal pharmaceutical delivery and the reduction of astringency in plant-based foods.

Slowly and rapidly digested fat emulsions are equally satiating but their triglycerides are differentially absorbed and metabolized in humans.

Little is known about the effect of dietary fat emulsion microstructure on plasma TG concentrations, satiety hormones, and food intake. The aim of this study was to structure dietary fat to slow digestion and flatten postprandial plasma TG concentrations but not increase food intake. Emulsions were stabilized by egg lecithin (control), sodium sterol lactylate, or sodium caseinate/monoglyceride (CasMag) with either liquid oil or a liquid oil/solid fat mixture. In a randomized, double-blind, crossover design, 4 emulsions containing 30 g of fat in a 350-mL preload were consumed by 10 men and 10 women (BMI = 25.1 ± 2.8 kg/m(2); age = 58.8 ± 4.8 y). Pre- and postprandial plasma TG, cholecystokinin (CCK), glucagon-like peptide-1 (GLP-1), and peptide YY (PYY) concentrations and food intake were measured. In a second experiment in a subset of the participants (n = 8, 4 men and 4 women), (13)C-labeled mixed TG was incorporated into 2 different emulsions and breath (13)C was measured over 6 h. In the first experiment, the postprandial rise in plasma TG concentrations following the CasMag-stabilized emulsion containing 30% solid fat was lower than all other emulsions at 90 and 120 min (P < 0.05). Plasma CCK (P < 0.0001), GLP-1 (P < 0.01), and PYY (P < 0.001) concentrations were also reduced following this emulsion compared with control. Food intake at a test meal, eaten 3 h after the preload, did not differ among the emulsions. In the second experiment, when measured by the (13)C breath test, 25% of the TG in the CasMag emulsion was absorbed and metabolized compared with control. In conclusion, fat can be structured to decrease its effect on plasma TG concentrations without increasing food intake.

Revisiting ß-casein as a stabilizer for lipid liquid crystalline nanostructured particles.

Lipid liquid crystalline nanoparticles such as cubosomes and hexosomes have unique internal nanostructures that have shown great potential in drug and nutrient delivery applications. The triblock copolymer, Pluronic F127, is usually employed as a steric stabilizer in dispersions of lipid nanostructured particles. In this study, we investigated the formation, colloidal stability and internal nanostructure and morphology of glyceryl monooleate (GMO) and phytantriol (PHYT) cubosome dispersions on substituting ß-casein with F127 in increasing proportion as the stabilizer. Internal structure and particle morphology were evaluated using small-angle X-ray scattering (SAXS) and cryo-transmission electron microscopy (cryo-TEM), while protein secondary structure was studied using synchrotron radiation circular dichroism (SRCD). The GMO cubosome dispersion stabilized by ß-casein alone displayed a V(2) (Pn3m) phase structure and a V(2) to H(2) phase transition at 60 °C. In comparison, F127-stabilized GMO dispersion had a V(2) (Im3m) phase structure and the H(2) phase only appeared at higher temperature, that is, 70 °C. In the case of PHYT dispersions, only the V(2) (Pn3m) phase structure was observed irrespective of the type and concentration of stabilizers. However, ß-casein-stabilized PHYT dispersion displayed a V(2) to H(2) to L(2) transition behavior upon heating, whereas F127-stabilized PHYT dispersion displayed only a direct V(2) to L(2) transition. The protein secondary structure was not disturbed by interaction with GMO or PHYT cubosomes. The results demonstrate that ß-casein provides steric stabilization to dispersions of lipid nanostructured particles and avoids the transition to Im3m structure in GMO cubosomes, but also favors the formation of the H(2) phase, which has implications in drug formulation and delivery applications.

Structural rearrangement of ß-lactoglobulin at different oil-water interfaces and its effect on emulsion stability.

Understanding the factors that control protein structure and stability at the oil-water interface continues to be a major focus to optimize the formulation of protein-stabilized emulsions. In this study, a combination of synchrotron radiation circular dichroism spectroscopy, front-face fluorescence spectroscopy, and dual polarization interferometry (DPI) was used to characterize the conformation and geometric structure of ß-lactoglobulin (ß-Lg) upon adsorption to two oil-water interfaces: a hexadecane-water interface and a tricaprylin-water interface. The results show that, upon adsorption to both oil-water interfaces, ß-Lg went through a ß-sheet to α-helix transition with a corresponding loss of its globular tertiary structure. The degree of conformational change was also a function of the oil phase polarity. The hexadecane oil induced a much higher degree of non-native α-helix compared to the tricaprylin oil. In contrast to the ß-Lg conformation in solution, the non-native α-helical-rich conformation of ß-Lg at the interface was resistant to further conformational change upon heating. DPI measurements suggest that ß-Lg formed a thin dense layer at emulsion droplet surfaces. The effects of high temperature and the presence of salt on these ß-Lg emulsions were then investigated by monitoring changes in the ζ-potential and particle size. In the absence of salt, high electrostatic repulsion meant ß-Lg-stabilized emulsions were resistant to heating to 90 °C. Adding salt (120 mM NaCl) before or after heating led to emulsion flocculation due to the screening of the electrostatic repulsion between colloidal particles. This study has provided insight into the structural properties of proteins adsorbed at the oil-water interface and has implications in the formulation and production of emulsions stabilized by globular proteins.

Stability to oxidation and interfacial behavior at the air/water interface of minimally-processed versus processed walnut oil-bodies.

Oil bodies (OB), the form of triacylglycerol storage in seeds, are interesting natural assemblies for nutritional applications. In walnuts, OB contain an important amount of polyunsaturated fatty acids that could be interesting food ingredients but may be prone to oxidation. The oxidative and interfacial behavior of walnut OB, either minimally-processed or after processing, were compared with processed complex walnut juice. The good oxidative stability of minimally-processed OB over 10 days (PV ≤ 8.4 meq O2/kg, TBARS = 1.4 mmol eq MDA/kg) and of processed walnut complex matrixes over 20 days (PV ≤ 4.8 meq O2/kg, TBARS = 1.4 mmol eq MDA/kg) was evidenced. In comparison, processing of OB promoted their oxidation. The interfacial studies led to the proposition of a new model of adsorption for minimally-processed OB that will be useful to design functional emulsion or foam in which OB act as emulsifiers.

Changes in beta-lactoglobulin conformation at the oil/water interface of emulsions studied by synchrotron radiation circular dichroism spectroscopy.

The structure of proteins at interfaces is a key factor determining the stability as well as organoleptic properties of food emulsions. While it is widely believed that proteins undergo conformational changes at interfaces, the measurement of these structural changes remains a significant challenge. In this study, the conformational changes of beta-lactoglobulin (beta-Lg) upon adsorption to the interface of hexadecane oil-in-water emulsions were investigated using synchrotron radiation circular dichroism (SRCD) spectroscopy. Far-UV SRCD spectra showed that adsorption of beta-Lg to the O/W interface caused a significant increase in non-native alpha-helix structure, accompanied by a concomitant loss of beta-sheet structure. Near-UV SRCD spectra revealed that a considerable disruption of beta-Lg tertiary structure occurred upon adsorption. Moreover, heat-induced changes to the non-native beta-Lg conformation at the oil/water interface were very small compared to the dramatic loss of beta-Lg secondary structure that occurred during heating in solution, suggesting that the interface has a stabilizing effect on the structure of non-native beta-Lg. Overall, our findings provide insight into the conformational behavior of proteins at oil/water interfaces and demonstrate the applicability of SRCD spectroscopy for measuring the conformation of adsorbed proteins in optically turbid emulsions.

Effects of interesterified lipid design on the short/medium chain fatty acid hydrolysis rate and extent (in vitro).

Short/medium chain fatty acids have well known health effects such as gut immune regulation and ketogenesis. The ability to realise these health effects is potentially limited by their rapid gastro-intestinal lipolysis. It was proposed that synthesising novel interesterified lipids via an interesterification reaction to generate a combination of short/medium and long chain fatty acids would modulate their gastrointestinal digestion. Using in vitro gastric and gastro-intestinal digestion models, the effect of the fatty acid chain length and interesterification on the rate and extent of lipolysis was analysed. Overall, "pure" (consisting of a single fatty acid) lipids of ≤C8 underwent rapid lipolysis releasing three fatty acids after intestinal hydrolysis while lipids of ≥C10 released two fatty acids after intestinal hydrolysis. The most interesting observation is that the extent of gastric lipolysis of C4 fatty acids was much lower when they were interesterified with longer chain fatty acids compared to that with the pure C4 triglyceride. Tributyrin underwent ∼60% lipolysis by gastric lipase as indicated by a decrease in total fatty acid release during SIF lipolysis after pre-exposure to rabbit gastric lipase (RGL) in SGF. In comparison, the C4-C8 interesterified lipid exhibited only a 18.1% decrease, and the C4-C18:1 interesterified lipid a 6.1% decrease in total fatty acid release in SGF-SIF. These results suggest that interesterification modulates the digestion of butyric acid from within the stomach to later in the intestine. This study reveals that the design of interesterified lipids alters the timing, but not the extent of short chain fatty acid delivery in the gastrointestinal tract. Such understanding has likely benefits for designing novel interesterified lipids which may have unique applications in various dietary and therapeutic modalities.

Microstructured Fibers for the Production of Food.

Food engineering faces the difficult challenge of combining taste, i.e., tailoring texture and rheology of food matrices with the balanced intake of healthy nutrients. In materials science, fiber suspensions and composites have been developed as a versatile and successful approach to tailor rheology while imparting materials with added functionalities. Structures based on such types of physical (micro)fibers are however rare in food production mainly due to a lack of food-grade materials and processes allowing for the fabrication of fibers with controlled sizes and microstructures. Here, the controlled fabrication of multi-material microstructured edible fibers is demonstrated using a food compatible process based on preform-to-fiber thermal drawing. It is shown that different material systems based on gelatin or casein, with plasticizers such as glycerol, can be thermally drawn into fibers with various geometries and cross-sectional structures. It is demonstrated that fibers can exhibit tailored mechanical properties post-drawing, and can encapsulate nutrients to control their release. The versatility of fiber materials is also exploited to demonstrate the fabrication of food-grade fabrics and scaffolds for food growth. The end results establish a new field in food production that relies on fiber-based simple and eco-friendly processes to realize enjoyable yet healthy and nutritious products.

The emulsion flocculation stability of protein-carbohydrate diblock copolymers.

The effect of the steric layer thickness on the flocculation stability of beta-lactoglobulin-carbohydrate diblock copolymers was assessed. The diblock copolymers were created by conjugating beta-lactoglobulin to maltose or a series of different M(n) maltodextrins using the Maillard reaction. The thickness and spatial arrangement of the interfacial layers were assessed via latex adsorption and selective enzymatic digestion studies. An increase in the molecular weight of the maltodextrin (900, 1900 and 3800 Da) increased the interfacial thickness (1.1, 2.5 and 7.3 nm, respectively). No detectable change to interfacial thickness was observed upon the attachment of maltose. The increase in the interfacial layer thickness scaled with the hydrodynamic size of the carbohydrate. The beta-lactoglobulin-maltodextrin conjugates were found to have a diblock architecture, with the protein anchored at the surface and the carbohydrate protruding into the aqueous continuous phase. The stability of oil-in-water emulsions formed using the conjugates was assessed by exposing them to salt (150 mM NaCl or 0-20 mM CaCl(2)), heat alone or heat in the presence of 150 mM NaCl. Conjugation of a 900 Da maltodextrin provided sufficient steric stabilization to prevent flocculation in high salt environments. The effect of the (number) density of the steric layer was also assessed by controlling the average number of maltodextrins attached per beta-lactoglobulin molecule. The steric layer density at which emulsions became unstable was a function of carbohydrate M(n). Emulsions made from the 900 Da maltodextrin conjugate became unstable below a steric layer density of one tail per 7.5 nm(2), whilst emulsions made from the 1900 Da maltodextrin were unstable below a steric layer density of one tail per 9.5 nm(2). This trend was expected and can be explained by the stronger van der Waals attraction that arises from the closer interdroplet separations that are permissible with the shorter maltodextrins. The excellent flocculation stability of Maillard conjugate emulsions is thought to arise from the combined effects of weak electrostatic repulsion from the screened protein surface charge and steric repulsion from the attached carbohydrate layer. This means that attachment of a relatively thin steric layer is enough to stabilize the emulsions against flocculation. These findings have important implications for the development of commercial processes to manufacture protein-carbohydrate Maillard conjugate emulsifiers. Furthermore the work provides a greater empirical understanding of the relationship between interfacial architecture and colloidal stability, and may provide the means for greater theoretical understanding of biopolymer stabilization of interfaces.

Beta-lactoglobulin-dextran Maillard conjugates: their effect on interfacial thickness and emulsion stability.

The influence of dextran molecular weight on the steric layer thickness and oil-in-water (O/W) emulsion flocculation stability of beta-lactoglobulin-dextran Maillard conjugates was investigated. Maillard conjugates were formed by reacting beta-lactoglobulin with various molecular weight dextrans (Mw = 18.5-440 kDa) under mild conditions (60 degrees C, 76% RH). Purified Maillard conjugates or beta-lactoglobulin were adsorbed onto latex spheres and the thickness of the adsorbed layer measured using photon correlation spectroscopy. The adsorbed layer thickness was 3 nm for beta-lactoglobulin alone. Attachment of dextran increased adsorbed layer thickness to 5 nm for the conjugate with low molecular weight dextran (Mw = 18.5 kDa) and 20 nm for that with high molecular weight dextran (Mw = 440 kDa). Enzymatic digestion of the adsorbed layers with dextranase reduced the layer to a thickness corresponding to that of beta-lactoglobulin alone. This suggests that the protein segment of the Maillard conjugate anchors the emulsifier to the interface. Attachment of dextran, irrespective of its molecular weight (18.5-440 kDa), increased the stability of emulsions against calcium induced flocculation, demonstrating that a low molecular weight dextran is sufficient for imparting high steric stability. The observation that the steric layer size was controlled by the dextran molecular weight, suggests that the results of layer thickness and emulsion stability should be universal across all globular proteins.

Infant digestion physiology and the relevance of in vitro biochemical models to test infant formula lipid digestion.

Lipids play an important role in the diet of preterm and term infants providing a key energy source and essential lipid components for development. While a lot is known about adult lipid digestion, our understanding of infant digestion physiology is still incomplete, the greatest gap being on the biochemistry of the small intestine, particularly the activity and relative importance of the various lipases active in the intestine. The literature has been reviewed to identify the characteristics of lipid digestion of preterm and term infants, but also to better understand the physiology of the infant gastrointestinal tract compared to adults that impacts the absorption of lipids. The main differences are a higher gastric pH, submicellar bile salt concentration, a far more important role of gastric lipases as well as differences at the level of the intestinal barrier. Importantly, the consequences of improper in vitro replication of gastric digestions conditions (pH and lipase specificity) are demonstrated using examples from the most recent of studies. It is true that some animal models could be adapted to study infant lipid digestion physiology, however the ethical relevance of such models is questionable, hence the development of accurate in vitro models is a must. In vitro models that combine up to date knowledge of digestion biochemistry with intestinal cells in culture are the best choice to replicate digestion and absorption in infant population, this would allow the adaptation of infant formula for a better digestion and absorption of dietary lipids by preterm and term infants.

Impact of Protein Gel Porosity on the Digestion of Lipid Emulsions.

The present study sought to understand how the microstructure of protein gels impacts lipolysis of gelled emulsions. The selected system consisted of an oil-in-water (o/w) emulsion embedded within gelatin gels. The gelatin-gelled emulsions consisted of a discontinuous network of aggregated emulsion droplets (mesoscale), dispersed within a continuous network of gelatin (microscale). The viscoelastic properties of the gelled emulsions were dominated by the rheological behavior of the gelatin, suggesting a gelatin continuous microstructure rather than a bicontinuous gel. A direct relationship between the speed of fat digestion and gel average mesh size was found, indicating that the digestion of fat within gelatin-gelled emulsions is controlled by the ability of the gel's microstructure to slow lipase diffusion to the interface of fat droplets. Digestion of fat was facilitated by gradual breakdown of the gelatin network, which mainly occurred via surface erosion catalyzed by proteases. Overall, this work has demonstrated that the lipolysis kinetics of gelled emulsions is driven by the microstructure of protein gels; this knowledge is key for the future development of microstructures to control fat digestion and/or the delivery of nutrients to different parts of the gastrointestinal tract.

Imaging gastric structuring of lipid emulsions and its effect on gastrointestinal function: a randomized trial in healthy subjects.

BACKGROUND: Efficient fat digestion requires fat processing within the stomach and fat sensing in the intestine. Both processes also control gastric emptying and gastrointestinal secretions. OBJECTIVE: We aimed to visualize the influence of the intragastric stability of fat emulsions on their dynamics of gastric processing and structuring and to assess the effect this has on gastrointestinal motor and secretory functions. DESIGN: Eighteen healthy subjects with normal body mass index (BMI) were studied on 4 separate occasions in a double-blind, randomized, crossover design. Magnetic resonance imaging (MRI) data of the gastrointestinal tract and blood triglycerides were recorded before and for 240 min after the consumption of the following 4 different fat emulsions: lipid emulsion 1 (LE1; acid stable, 0.33 µm), lipid emulsion 2 (LE2; acid stable, 52 µm), lipid emulsion 3 (LE3; acid unstable, solid fat, 0.32 µm), and lipid emulsion 4 (LE4; acid unstable, liquid fat, 0.38 µm). RESULTS: Intragastric emulsion instability was associated with a change in gastric emptying. Acid-unstable emulsions exhibited biphasic and faster emptying profiles than did the 2 acid-stable emulsions (P ≤ 0.0001). When combined with solid fat (LE3), different dynamics of postprandial gallbladder volume were induced (P ≤ 0.001). For acid-stable emulsions, a reduction of droplet size by 2 orders of magnitude [LE1 (0.33 µm) compared with LE2 (52 µm)] delayed gastric emptying by 38 min. Although acid-stable (LE1 and LE2) and redispersible (LE4) emulsions caused a constant increase in blood triglycerides, no increase was detectable for LE3 (P < 0.0001). For LE3, MRI confirmed the generation of large fat particles during gastric processing, which emptied into and progressed through the small intestine. CONCLUSIONS: MRI allows the detailed characterization of the in vivo fate of lipid emulsions. The acute effects of lipid emulsions on gastric emptying, gallbladder volume, and triglyceride absorption are dependent on microstructural changes undergone during consumption. Gastric peristalsis and secretion were effective at redispersing pools of liquid fat in the stomach. This trial was registered at clinicaltrials.gov as NCT01253005.

In vitro digestion of citric acid esters of mono- and diglycerides (CITREM) and CITREM-containing infant formula/emulsions.

CITREM is an emulsifier used in the food industry and contains citric acid esters of mono- and diglycerides (GCFE). It is generally recognized as safe but no publication on its digestibility under gastrointestinal conditions and impact on fat digestion was available. It was shown here that fatty acids are released from CITREM by gastric lipase, pancreatic lipase, pancreatic-lipase-related protein 2 and carboxyl ester hydrolase. A two-step in vitro digestion model mimicking lipolysis in the stomach and upper small intestine of term and preterm infants was then used to evaluate the digestibility of CITREM alone, CITREM-containing infant formula and fat emulsions, and isolated GCFE fractions. Overall, it was shown that fat digestion is not significantly changed by the presence of CITREM, and fatty acids contained in CITREM compounds are released to a large extent by lipases. Nevertheless, undigestible water-soluble compounds containing glycerol and citric acid units were identified, indicating that the ester bond between citric acid and glycerol is not fully hydrolyzed throughout the proposed digestion.