Identification of Synergies in Fe, Co-Coordinated Polyphthalocyanines Scaffolds for Electrochemical CO2 Reduction Reaction.

The synergistic interaction between the isolated metal sites promoted the electrocatalytic activity of the catalysts. However, the structural heterogeneity of the isolated sites makes it challenging to evaluate this effect accurately. In this work, metal-coordinated polyphthalocyanine molecules (Fe-PPc, Co-PPc, FeCo-PPc) with long-range ordered and precise coordination structures are used as a platform to study the synergies of different isolated metal sites in the electrochemical CO2 reduction reaction. The combination means of experimental and theoretical calculation clearly reveal that the coexistence of Fe and Co sites in PPc significantly enhances the conjugation effect of the macrocycle. This enhancement subsequently causes the metal sites to lose more electrons, thereby improving their adsorption of CO2 and facilitating the formation of intermediate *COOH on them. As a result, FeCo-PPc achieves a CO partial current density of about 57.4 mA/cm2 with a high turnover frequency of over 49000 site-1 h-1 at -0.9 V (vs RHE).

Anisotropic Amorphization and Phase Transition in Na2 Ti3 O7 Anode Caused by Electron Beam Irradiation.

Na2 Ti3 O7 is considered one of the most promising anode materials for sodium ion batteries due to its superior safety, environmental friendliness, and low manufacturing cost. However, its structural stability and reaction mechanism still have not been fully explored. As the electron beam irradiation introduces a similar impact on the Na2 Ti3 O7 anode as the extraction of Na+ ions during the battery discharge process, the microstructure evolution of the materials is investigated by advanced electron microscopy techniques at the atomic scale. Anisotropic amorphization is successfully observed. Through the integrated differential phase contrast-scanning transmission electron microscopy technique and density functional theory calculation, a phase transition pathway involving a new phase, Na2 Ti24 O49 , is proposed with the reduction of Na atoms. Additionally, it is found that the amorphization is dominated by the surface energy and electron dose rate. These findings will deepen the understanding of structural stability and deintercalation mechanism of the Na2 Ti3 O7 anode, providing new insight into exploring the failure mechanism of electrode materials.

Constructing Asymmetric Charge Polarized NiCo Prussian Blue Analogue for Promoted Electrocatalytic Methanol to Formate Conversion.

The highly selective electrochemical conversion of methanol to formate is of great significance for various clean energy devices, but understanding the structure-to-property relationship remains unclear. Here, the asymmetric charge polarized NiCo prussian blue analogue (NiCo PBA-100) is reported to exhibit remarkable catalytic performance with high current density (210 mA cm-2 @1.65 V vs RHE) and Faraday efficiency (over 90%). Meanwhile, the hybrid water splitting and Zinc-methanol-battery assembled by NiCo PBA-100 display the promoted performance with decent stability. X-ray absorption spectroscopy (XAS) and operando Raman spectroscopy indicate that the asymmetric charge polarization in NiCo PBA leads to more unoccupied states of Ni and occupied states of Co, thereby facilitating the rapid transformation of the high-active catalytic centers. Density functional theory calculations combining operando Fourier transform infrared spectroscopy demonstrate that the final reconstructed catalyst derived by NiCo PBA-100 exhibits rearranged d band properties along with a lowered energy barrier of the rate-determining step and favors the desired formate production.

Operando Exploring and Modulating Phase Evolution Chemistry from MAX to MXenes in Molten Salt Synthesis.

Lewis acidic molten salt method is a promising synthesis strategy for achieving MXenes with controllable surface termination from numerous MAX materials. Understanding the phase evolution chemistry during etching and post-processing is highly desirable but remains a key challenge due to the lack of suitable in-situ characterizations and the complexity of the reaction process. Herein, we introduce an operando synchrotron radiation X-ray diffraction (SRXRD) technique to unveil the phase evolution process of Nb2GaC MAX under a molten-salt ambient, proposing a controllable synthesis to achieve optimal etching through precise temperature and time adjustment. Subsequently, the phase structure of Nb2CTx MXenes is successfully tailored from hexagonal to amorphous by time-dependent persulfate oxidation. The resulting amorphous Nb2CTx with a well-patterned morphology and numerous chloride terminations exhibits highly improved specific capacity, rate capability, and long cycling for Li+ storage with a Cl-containing surface protective film. Addressing the time-related phase evolution during the entire molten salt strategy provides new insights into achieving higher efficiency and controllability in preparing MXenes and shows great potential in high-performance energy storage systems based on MXenes.

Engineering Phase Transition from 2H to 1T in MoSe2 by W Cluster Doping toward Lithium-Ion Battery.

Phase engineering synthesis strategy is extremely challenging to achieve stable metallic phase molybdenum diselenide for a better physicochemical property than the thermodynamically stable semiconducting phase. Herein, we introduce tungsten atom clusters into the MoSe2 layered structure, realizing the phase transition from the 2H semiconductor to 1T metallic phase at a high temperature. The combination of synchrotron radiation X-ray absorption spectroscopy, Cs-corrected transmission electron microscopy, and theoretical calculation demonstrates that the aggregation doping of W atoms is the factor of MoSe2 structure transformation. When utilizing this distinct structure as an anode component, it demonstrates outstanding rate capability and durability. After 500 cycles, this results in a specific capacity of 1007.4 mAh g-1 at 500 mA g-1. These discoveries could open the door for the future development of high-performance anodes for ion battery applications.

Controlled synthesis of transition metal oxide multi-shell structures andin situstudy of the energy storage mechanism.

Multi-shell transition metal oxide hollow spheres show great potential for applications in energy storage because of their unique multilayered hollow structure with large specific surface area, short electron and charge transport paths, and structural stability. In this paper, the controlled synthesis of NiCo2O4, MnCo2O4, NiMn2O4multi-shell layer structures was achieved by using the solvothermal method. As the anode materials for Li-ion batteries, the three multi-shell structures maintained good stability after 650 long cycles in the cyclic charge/discharge test. Thein situtransmisssion electron microscope characterization combined with cyclic voltammetry tests demonstrated that the three anode materials NiCo2O4, MnCo2O4and NiMn2O4have similar charge/discharge transition mechanisms, and the multi-shell structure can effectively buffer the volume expansion and structural collapse during lithium embedding/delithiation to ensure the stability of the electrode structure and cycling performance. The research results can provide effective guidance for the synathesis and charging/discharging mechanism of multi-shell metal oxide lithium-ion battery anode materials.

Significantly anisotropic Raman response of the (110) surface in quasi-one-dimensional system (TaSe4)2I by polarized Raman spectroscopy.

Quasi-one-dimensional materials are usually characterized by optical response spectroscopy methods, which show significant polarization dependence. Herein, we report a systematical investigation of polarized Raman scattering on the (110) crystal surface of the layered (TaSe4)2I compound. Taking into account group theory analysis of the crystal structure and the Raman tensor transformation technique, the vibrational mode of the Raman peaks can be differentiated by the angular dependence of the Raman peak intensity in parallel and vertical polarization Raman scattering tests. Moreover, density functional perturbation theory (DFPT) calculation confirmed the form of the Raman tensor of the (110) crystal surface, which was consistent with the result of the Raman tensor transformation technique, and the Raman spectrum and phonon dispersion curve calculations were also performed based on the Vienna ab initio simulation package (VASP). This new method provides useful insight for accurately identifying the lattice vibration behavior in new 2D layered structures.

Structural Evolution of Anatase-Supported Platinum Nanoclusters into a Platinum-Titanium Intermetallic Containing Platinum Single Atoms for Enhanced Catalytic CO Oxidation.

Strong metal-support interactions characteristic of the encapsulation of metal particles by oxide overlayers have been widely observed on large metal nanoparticles, but scarcely occur on small nanoclusters (<2 nm) for which the metal-support interactions remain elusive. Herein, we study the structural evolution of Pt nanoclusters (1.5 nm) supported on anatase TiO2 upon high-temperature H2 reduction. The Pt nanoclusters start to partially evolve into a CsCl-type PtTi intermetallic compound when the reduction temperature reaches 400 °C. Upon 700 °C reduction, the PtTi nanoparticles are exclusively formed and grow epitaxially along the TiO2 (101) crystal faces. The thermodynamics of the formation of PtTi via migration of reduced Ti atoms into Pt cluster is unraveled by theoretical calculations. The thermally stable PtTi intermetallic compound, with single-atom Pt isolated by Ti, exhibits enhanced catalytic activity and promoted catalytic durability for CO oxidation.

Therapeutic method for early-stage second primary non-small lung cancer: analysis of a population-based database.

BACKGROUND: Early-stage non-small lung cancer patients may survive long enough to develop second primary lung cancers. However, few studies have accurately described the therapeutic method, evaluation or prognostic factors for long-term survival in this complex clinical scenario. METHODS: Patients who had first and second primary non-small lung cancer in the Surveillance, Epidemiology, and End Results database between 2004 and 2015 were evaluated. Patients were included when their tumors were pathologically diagnosed as non-small lung cancer and in the early-stage (less than 3 cm and with no lymph node metastasis). Therapeutic methods were categorized as lobectomy, sublobectomy or no surgery. The influence of different therapeutic methods on the overall survival rate was compared. RESULTS: For the first primary tumor, patients who underwent lobectomy achieved superior survival benefits compared with patients who underwent sublobectomy. For the second primary tumor, long-term survival was similar in patients who underwent lobectomy and those who underwent sublobectomy treatment. The multivariate analysis indicated that age, disease-free time interval, sex, and first and second types of surgery were independent prognostic factors for long-term survival. Our results showed that the 5-year overall survival rate was 91.9% when the disease-free interval exceeded 24 months. CONCLUSION: Lobectomy for the first primary tumor followed by sublobectomy for the second primary tumor may be a beneficial therapeutic method for patients. If the disease-free interval exceeds 24 months, the second primary tumor will have no influence on the natural course for patients diagnosed with a first primary non-small lung cancer.

Rational design for high-yield monolayer WS2films in confined space under fast thermal processing.

Tungsten Disulfide (WS2) films, as one of the most attractive members in the family of transition metal dichalcogenides, were synthesized typically on SiO2/Si substrate by confine-spaced chemical vapor deposition method. The whole process could be controlled efficiently by precursor concentration and fast thermal process. To be priority, the effect of fast heating-up to cooling-down process and source ratio-dependent rule for WS2structure have been systematically studied, leading to high-yield and fine structure of monolayer WS2films with standard triangular morphology and average edge length of 92.4µm. The growth time of the samples was regulated within 3 min, and the optimal source ratio of sulfur to tungsten oxide is about 200:3. The whole experimental duration was about 50 min, which is only about quarter in comparison to relevant reports. We assume one type of 'multi-nucleation dynamic process' to provide a potential way for fast synthesis of the samples. Finally, the good performance of as-fabricated field-effect transistor on WS2film was achieved, which exhibits high electron mobility of 4.62 cm2V-1s-1, fast response rate of 42 ms, and remarkable photoresponsivity of 3.7 × 10-3A W-1. Our work will provide a promising robust way for rapid synthesis of high-quality monolayer TMDs films and pave the way for the potential applications of TMDCs.

Ternary MoSe2xTe2-2x alloy with tunable band gap for electronic and optoelectronic transistors.

Two-dimensional transition metal dichalcogenide (2D TMDs) alloys, consisting of three or more elements, offer a luxury variety of chemical and physical properties through elemental ratio alteration, thus may provide ideal candidate with tunable band gap for specific electrical applications. In this work, we demonstrate a high-quality layered MoSe2xTe2-2x (x = 0 ∼ 1) alloy synthesized via one-step chemical vapor transport method for high-performance electronic and optoelectronic transistors. Our characterizations reveal the obtained ternary alloy forming high-quality single crystal layers with 2H phase. Interestingly, the electronic transistors fabricated on MoSe2xTe2-2x thin layers (6 ∼ 7 layers) display an anomalous transition from ambipolar to n-type in conductive characteristics with the increase of substitution x value. The subsequent photoelectrical measurements exhibit that high on-off ratio for every ratio (x = 0.18, 0.38, 0.67, 0.83) with optical band gap in the range of 1.6 eV and 1.1 eV (near infrared). The optimized MoSe0.37Te1.63-based transistor can achieve up to ∼107 I on/I off and 105 I ph/I dark ratio, 100 mA W-1 photo-responsivity and 2.38% external quantum efficiency with high photoresponsivity. Thus, such ternary MoSe2xTe2-2x alloys may pose a great potential for 2D-based electronic and photoelectronic applications.

PVP intercalated metallic WSe2 as NIR photothermal agents for efficient tumor ablation.

Transition metal dichalogenides (TMDCs) with unique layered structures hold promising potential as transducers for photothermal therapy. However, the low photothermal conversion efficiency and poor stability in some cases limit their practical applications. Herein, we demonstrate the fabrication of ultrathin homogeneous hybridized TMDC nanosheets and their use for highly efficient photothermal tumor ablation. In particular, the nanosheets were composed of metallic WSe2 intercalated with polyvinylpyrrolidone (PVP), which was facilely prepared through a solvothermal process from the mixture of selenourea crystals, WCl6 powder along with PVP polymeric nanogel. Our characterizations revealed that the obtained nanosheets exhibited excellent photothermal conversion efficiency, therapeutic demonstration with improved biocompatibility and physiological stability attributing to the combined merits of metallic phase of WSe2 and hydrophilic PVP insertion. Both the histological analysis of vital organs and in vitro/in vivo tests confirmed the nanosheets as actively effective and biologically safe in this phototherapeutic technique. Findings from this non-invasive experiment clearly emphasize the explorable therapeutic efficacy of the layered-based hybrid agents in future cancer treatment planning procedures.

Well-Defined Cobalt Catalyst with N-Doped Carbon Layers Enwrapping: The Correlation between Surface Atomic Structure and Electrocatalytic Property.

Admittedly, the surface atomic structure of heterogenous catalysts toward the electrochemical oxygen reduction reaction (ORR) are accepted as the important features that can tune catalytic activity and even catalytic pathway. Herein, a surface engineering strategy to controllably synthesize a carbon-layer-wrapped cobalt-catalyst from 2D cobalt-based metal-organic frameworks is elaborately demonstrated. Combined with synchrotron radiation X-ray photoelectron spectroscopy, the soft X-ray absorption near-edge structure results confirmed that rich covalent interfacial CoNC bonds are efficiently formed between cobalt nanoparticles and wrapped carbon-layers during the polydopamine-assisted pyrolysis process. The X-ray absorption fine structure and corresponding extended X-ray absorption fine structure spectra further reveal that the wrapped cobalt with Co-N coordinations shows distinct surface distortion and atomic environmental change of Co-based active sites. In contrast to the control sample without coating layers, the 800 °C-annealed cobalt catalyst with N-doped carbon layers enwrapping achieves significantly enhanced ORR activity with onset and half-wave potentials of 0.923 and 0.816 V (vs reversible hydrogen electrode), highlighting the important correlation between surface atomic structure and catalytic property.

Active Sites Engineering toward Superior Carbon-Based Oxygen Reduction Catalysts via Confinement Pyrolysis.

Developing efficient and low-cost defective carbon-based catalysts for the oxygen reduction reaction (ORR) is essential to metal-air batteries and fuel cells. Active sites engineering toward these catalysts is highly desirable but challenging to realize boosted catalytic performance. Herein, a sandwich-like confinement route to achieve the controllable regulation of active sites for carbon-based catalysts is reported. In particular, three distinct catalysts including metal-free N-doped carbon (NC), single Co atoms dispersed NC (Co-N-C), and Co nanoparticles-contained Co-N-C (Co/Co-N-C) are controllably realized and clearly identified by synchrotron radiation-based X-ray spectroscopy. Electrochemical measurements suggest that the Co/Co-N-C catalyst delivers optimized ORR performance due to the rich Co-Nx active sites and their synergistic effect with metallic Co nanoparticles. This work provides deep insight for rationally designing efficient ORR catalyst based on active sites engineering.

Ferromagnetism in CVT grown tungsten diselenide single crystals with nickel doping.

Two dimensional (2D) single crystal layered transition materials have had extensive consideration owing to their interesting magnetic properties, originating from their lattices and strong spin-orbit coupling, which make them of vital importance for spintronic applications. Herein, we present synthesis of a highly crystalline tungsten diselenide layered single crystal grown by chemical vapor transport technique and doped with nickel (Ni) to tailor its magnetic properties. The pristine WSe2 single crystal and Ni-doped crystal were characterized and analyzed for magnetic properties using both experimental and computational aspects. It was found that the magnetic behavior of the 2D layered WSe2 crystal changed from diamagnetic to ferromagnetic after Ni-doping at all tested temperatures. Moreover, first principle density functional theory (DFT) calculations further confirmed the origin of room temperature ferromagnetism of Ni-doped WSe2, where the d-orbitals of the doped Ni atom promoted the spin moment and thus largely contributed to the magnetism change in the 2D layered material.

All-Carbon Ultrafast Supercapacitor by Integrating Multidimensional Nanocarbons.

Ultrafast and high capacity all-carbon supercapacitors with 3D porous aerogel electrode are realized by combining carbon nanostructures of various dimensionalities, including 0D carbon onions, 1D carbon nanotubes, and 2D graphene oxide. The synergistic effects from the different forms of nanocarbons render this hybrid outstanding capacitance with excellent stability, even at ultrafast charge-discharge rates.

Designing hierarchical hollow nanostructures of Cu2MoS4 for improved hydrogen evolution reaction.

Layered Cu2MoS4, consisting of earth-abundant elements, is regarded as a potential catalyst for the hydrogen evolution reaction (HER). Herein, we demonstrate a Cu2O-based template strategy to synthesise hierarchical hollow nanostructures of Cu2MoS4. The characterizations reveal that the electrochemically active surface of the hollow Cu2MoS4 is largely enhanced, in contrast to the nanosheet or nanoparticle structures. As the direct outcome, the designed hierarchical hollow structures display excellent HER activities with a low overvoltage and small Tafel slope. This study may provide new inspiration for the research of other ternary sulphide materials as well as subsequently accelerating their applications in the field of catalysis.

Growing and Etching MoS2 on Carbon Nanotube Film for Enhanced Electrochemical Performance.

In this work we directly synthesized molybdenum disulfide (MoS2) nanosheets on carbon nanotube film (MoS2@CNT) via a two-step chemical vapor deposition method (CVD). By etching the obtained MoS2@CNT into 10% wt HNO3, the morphology of MoS2 decorated on CNT bundles was modulated, resulting in more catalytic active MoS2 edges being exposed for significantly enhanced electrochemical performance. Our results revealed that an 8 h acid etching sample exhibited the best performance for the oxygen evolution reaction, i.e., the current density reached 10 mA/cm² under 375 mV over-potential, and the tafel slope was as low as 94 mV/dec. The enhanced behavior was mainly originated from the more catalytic sites in MoS2 induced by the acid etching treatment and the higher conductivity from the supporting CNT films. Our study provides a new route to produce two-dimensional layers on CNT films with tunable morphology, and thus may open a window for exploring its promising applications in the fields of catalytic-, electronic-, and electrochemical-related fields.

Distinct Regulation of ASCL1 by the Cell Cycle and Chemotherapy in Small Cell Lung Cancer.

Small cell lung cancer (SCLC) is an aggressive and lethal malignancy. Achaete-scute homolog 1 (ASCL1) is essential for the initiation of SCLC in mice and the development of pulmonary neuroendocrine cells (PNEC), which are the major cells of origin for SCLC. However, the regulatory mechanism of ASCL1 in SCLC remains elusive. Here, we found that ASCL1 expression gradually increases as the tumors grow in a mouse SCLC model, and is regulated by the cell cycle. Mechanistically, CDK2-CyclinA2 complex phosphorylates ASCL1, which results in increased proteasome-mediated ASCL1 protein degradation by E3 ubiquitin ligase HUWE1 during mitosis. TCF3 promotes the multisite phosphorylation of ASCL1 through the CDK2-CyclinA2 complex and the interaction between ASCL1 and TCF3 protects ASCL1 from degradation. The dissociation of TCF3 from ASCL1 during mitosis accelerates the degradation of ASCL1. In addition, chemotherapy drugs greatly reduce the transcription of ASCL1 in SCLC cells. Depletion of ASCL1 sensitizes SCLC cells to chemotherapy drugs. Together, our study demonstrates that ASCL1 is a cell-cycle-regulated protein and provides a theoretical basis for applying cell-cycle-related antitumor drugs in SCLC treatment. Implications:Our study revealed a novel regulatory mechanism of ASCL1 by cell cycle and chemotherapy drugs in SCLC. Treating patients with SCLC with a combination of ASCL1-targeting therapy and chemotherapy drugs could potentially be beneficial.

Camrelizumab, chemotherapy and apatinib in the neoadjuvant treatment of resectable oesophageal squamous cell carcinoma: a single-arm phase 2 trial.

Background: In resectable oesophageal squamous cell carcinoma (ESCC), the efficacy of camrelizumab combined with chemotherapy and apatinib followed by minimally invasive oesophagectomy is not clear. We aimed to fill this knowledge gap. Methods: This investigator-initiated, single-arm, prospective, phase 2 trial was performed at the Second Affiliated Hospital of Zhejiang University, China. Patients (aged 18-75 years) who were histologically or cytologically diagnosed with ESCC were deemed suitable to participate in this trial. Patients received 2-3 cycles of neoadjuvant therapy with camrelizumab, nedaplatin, albumin paclitaxel, and apatinib; each cycle was repeated every 14 days. Surgery occurred 4-6 weeks after the last neoadjuvant treatment cycle. The primary outcome was the pathological complete response (PCR) rate of the tumour and lymph nodes. The changes in the peripheral blood immunoprofile among patients without PCR (ie, non-PCR [NPCR]) and with PCR were assessed by mass cytometry. This study was registered with ClinicalTrials.gov, NCT04666090. Findings: 42 patients were enrolled between November 23, 2020 and December 31, 2022. The disease control rate was 100.0% (95% CI, 91.6-100%), and the objective response rate was 83.3% (95% CI, 68.6-93.0%). Six (14.3%) patients experienced grade 3 adverse events. The most common were white blood cell count decrease (31.0%), alopecia (81.0%), asthenia (38.1%), and reactive cutaneous capillary endothelial proliferation (35.7%). 41 patients received minimally invasive oesophagectomy; all 41patients achieved R0 resection, and 18 (43.9%, 95% CI, 28.5-60.3%) patients achieved PCR. The median follow-up was 23 months and the 2-year survival rate was 85.9%. T-cell subsets in both the PCR and NPCR groups exhibited consistency in response to neoadjuvant therapy. In contrast, some of natural killer (NK) cells (NK-C03, NK-C11), B cells (B-C06) and monocytes (M-C05), exhibited significant differences between the PCR and NPCR groups before neoadjuvant therapy. M-C06 had a significant difference in the PCR group and NPCR group after neoadjuvant therapy. NK-C12 and B-C15 showed significant differences both before and after neoadjuvant therapy. Interpretation: The application of camrelizumab, chemotherapy and apatinib in the neoadjuvant setting for locally advanced ESCC has shown promising antitumour activity and an acceptable safety profile in this single-arm study. In the neoadjuvant setting, NK cell, B cell, and monocyte subsets exhibited greater predictive power for immunotherapy responsiveness than T-cell subsets. Longer follow-up to assess survival outcomes and a phase 3 randomised trial are needed to further evaluate the proposed treatment. Funding: The China Anti-Cancer Association and the "Leading Goose" Research and Development Project of Zhejiang Province.