Near-room-temperature water-mediated densification of bulk van der Waals materials from their nanosheets.

The conventional fabrication of bulk van der Waals (vdW) materials requires a temperature above 1,000 °C to sinter from the corresponding particulates. Here we report the near-room-temperature densification (for example, ∼45 °C for 10 min) of two-dimensional nanosheets to form strong bulk materials with a porosity of <0.1%, which are mechanically stronger than the conventionally made ones. The mechanistic study shows that the water-mediated activation of van der Waals interactions accounts for the strong and dense bulk materials. Initially, water adsorbed on two-dimensional nanosheets lubricates and promotes alignment. The subsequent extrusion closes the gaps between the aligned nanosheets and densifies them into strong bulk materials. Water extrusion also generates stresses that increase with moulding temperature, and too high a temperature causes intersheet misalignment; therefore, a near-room-temperature moulding process is favoured. This technique provides an energy-efficient alternative to design a wide range of dense bulk van der Waals materials with tailored compositions and properties.

Unraveling the origin of extra strengthening in gradient nanotwinned metals.

Materials containing heterogeneous nanostructures hold great promise for achieving superior mechanical properties. However, the strengthening effect due to plastically inhomogeneous deformation in heterogeneous nanostructures has not been clearly understood. Here, we investigate a prototypical heterogeneous nanostructured material of gradient nanotwinned (GNT) Cu to unravel the origin of its extra strength arising from gradient nanotwin structures relative to uniform nanotwin counterparts. We measure the back and effective stresses of GNT Cu with different nanotwin thickness gradients and compare them with those of homogeneous nanotwinned Cu with different uniform nanotwin thicknesses. We find that the extra strength of GNT Cu is caused predominantly by the extra back stress resulting from nanotwin thickness gradient, while the effective stress is almost independent of the gradient structures. The combined experiment and strain gradient plasticity modeling show that an increasing structural gradient in GNT Cu produces an increasing plastic strain gradient, thereby raising the extra back stress. The plastic strain gradient is accommodated by the accumulation of geometrically necessary dislocations inside an unusual type of heterogeneous dislocation structure in the form of bundles of concentrated dislocations. Such a heterogeneous dislocation structure produces microscale internal stresses leading to the extra back stress in GNT Cu. Altogether, this work establishes a fundamental connection between the gradient structure and extra strength in GNT Cu through the mechanistic linkages of plastic strain gradient, heterogeneous dislocation structure, microscale internal stress, and extra back stress. Broadly, this work exemplifies a general approach to unraveling the strengthening mechanisms in heterogeneous nanostructured materials.

Temperature-Dependent Paracrystalline Nucleation in Atomically Disordered Diamonds.

Atomically disordered diamonds with medium-range order realized in recent experiments extend our knowledge of atomic disorder in materials. However, the current understanding of amorphous carbons cannot answer why paracrystalline diamond (p-D) can be formed inherently different from other tetrahedral amorphous carbons (ta-Cs), and the emergence of p-D seems to be easily hindered by inappropriate temperatures. Herein, we performed atomistic-based simulations to shed light on temperature-dependent paracrystalline nucleation in atomically disordered diamonds. Using metadynamics and two carefully designed collective variables, reversible phase transitions among different ta-Cs can be presented under different temperatures, evidenced by corresponding local minima on the free energy surface and reaction path along the free energy gradient. We found that p-D is preferred in a narrow range of temperatures, which is comparable to real experimental temperatures under the Arrhenius framework. The insights and related methods should open up a perspective for investigating other amorphous carbons.

Strain Engineering of Ion-Coordinated Nanochannels in Nanocellulose.

Expanding the interlayer spacing plays a significant role in improving the conductivity of a cellulose-based conductor. However, it remains a challenge to regulate the cellulose nanochannel expanded by ion coordination. Herein, starting from multiscale mechanics, we proposed a strain engineering method to regulate the interlayer spacing of the cellulose nanochannels. First-principles calculations were conducted to select the most suitable ions for coordination. Large-scale molecular dynamics simulations were performed to reveal the mechanism of interlayer spacing expansion by the ion cross-linking. Combining the shear-lag model, we established the relationship between interfacial cross-link density and interlayer spacing of an ion-coordinated cellulose nanochannel. Consequently, fast ion transport and current regulation were realized via the strain engineering of nanochannels, which provides a promising strategy for the current regulation of a cellulose-based conductor.

Anisotropic Fracture of Two-Dimensional Ta2NiSe5.

Anisotropic two-dimensional materials present a diverse range of physical characteristics, making them well-suited for applications in photonics and optoelectronics. While mechanical properties play a crucial role in determining the reliability and efficacy of 2D material-based devices, the fracture behavior of anisotropic 2D crystals remains relatively unexplored. Toward this end, we herein present the first measurement of the anisotropic fracture toughness of 2D Ta2NiSe5 by microelectromechanical system-based tensile tests. Our findings reveal a significant in-plane anisotropic ratio (∼3.0), accounting for crystal orientation-dependent crack paths. As the thickness increases, we observe an intriguing intraplanar-to-interplanar transition of fracture along the a-axis, manifesting as stepwise crack features attributed to interlayer slippage. In contrast, ruptures along the c-axis surprisingly exhibit persistent straightness and smoothness regardless of thickness, owing to the robust interlayer shear resistance. Our work affords a promising avenue for the construction of future electronics based on nanoribbons with atomically sharp edges.

Subsize Pt-based intermetallic compound enables long-term cyclic mass activity for fuel-cell oxygen reduction.

Pt-based alloy catalysts may promise considerable mass activity (MA) for oxygen reduction but are generally unsustainable over long-term cycles, particularly in practical proton exchange membrane fuel cells (PEMFCs). Herein, we report a series of Pt-based intermetallic compounds (Pt3Co, PtCo, and Pt3Ti) enclosed by ultrathin Pt skin with an average particle size down to about 2.3 nm, which deliver outstanding cyclic MA and durability for oxygen reduction. By breaking size limitation during ordered atomic transformation in Pt alloy systems, the MA and durability of subsize Pt-based intermetallic compounds can be simultaneously optimized. The subsize scale was also found to enhance the stability of the membrane electrode through preventing the poisoning of catalysts by ionomers in humid fuel-cell conditions. We anticipate that subsize Pt-based intermetallic compounds set a good example for the rational design of high-performance oxygen reduction electrocatalysts for PEMFCs. Furthermore, the prevention of ionomer poisoning was identified as the critical parameter for assembling robust commercial membrane electrodes in PEMFCs.

Biomimetic Ultratough, Strong, and Ductile Artificial Polymer Fiber Based on Immovable and Slidable Cross-links.

It remains a challenge to artificially fabricate fibers with the macroscopic mechanical properties and characteristics of spider silk. Herein, a covalently cross-linked double-network strategy was proposed to disrupt the inverse relation of strength and toughness in the fabrication of ultratough and superstrong artificial polymer fibers. Our design utilized a strong fishnet-like structure based on immovable cellulose nanocrystal cross-links to mimic the function of the ß-sheet nanocrystallites and a slidable mechanically interlocked network based on polyrotaxane to imitate the dissipative stick-slip motion of the ß-strands in spider silk. The resultant fiber exhibited superior mechanical properties, including gigapascal tensile strength, a ductility of over 60%, and a toughness exceeding 420 MJ/m3. The fibers also showed robust biological functions similar to those of spider silks, demonstrating mechanical enhancement, energy absorption ability, and shape memory. A composite with our artificial fibers as reinforcing fibers exhibited remarkable tear and fatigue resistance.

Simultaneously Strengthening and Toughening All-Natural Structural Materials via 3D Nanofiber Network Interfacial Design.

Constructing structural materials from sustainable raw materials is considered an efficient way to reduce the potential threat posed by plastics. Nevertheless, challenges remain regarding combining excellent mechanical and thermal properties, especially the balance of strength and toughness. Here, we report a 3D nanofiber network interfacial design strategy to strengthen and toughen all-natural structural materials simultaneously. The introduced protonated chitosan at the interface between the surface oxidized 3D nanonetwork of bacterial cellulose forms the interfacial interlocking structure of nanonetworks, achieving a robust physical connection and providing enough physical contact sites for chemical crosslinking. The obtained sustainable structural material successfully integrates excellent mechanical and thermal properties on the nanoscale of cellulose nanofibers, such as light weight, high strength, and superior thermal expansion coefficient. The relationship between structural design and comprehensive mechanical property improvement is analyzed in detail, providing a universal perspective to design sustainable high-performance structural materials from nanoscale building blocks.

Bioinspired Impact-Resistant and Self-Monitoring Nanofibrous Composites.

Lightweight and impact-resistant materials with self-monitoring capability are highly desired for protective applications, but are challenging to be artificially fabricated. Herein, a scalable-manufactured aramid nanofiber (ANF)-based composite combining these key properties is presented. Inspired by the strengthening and toughening mechanisms relying on recoverable interfaces commonly existing in biological composites, mechanically weak but dense hydrogen bonds are introduced into the ANF interfaces to achieve simultaneously enhanced tensile strength (300 MPa), toughness (55 MJ m-3 ), and impact resistance of the nanofibrous composite. The achieved mechanical property combination displays attractive advantages compared with that of most of previously reported nanocomposites. Additionally, the nanofibrous composite is designed with a capability for real-time self-monitoring of its structural safety during both quasi-static tensile and dynamic impact processes, based on the strain/damage-induced resistance variations of a conductive nanowire network inside it. These comprehensive properties enable the present nanofibrous composite with promising potential for protective applications.

Surface Anion Promotes Pt Electrocatalysts with High CO Tolerance in Fuel-Cell Performance.

Platinum reaches considerable activity and stability as an electrocatalyst but is not always capable of maintaining such performance under CO poisoning, particularly in CO residual fuels for practical proton-exchange membrane fuel cells (PEMFCs). In this work, we report that surface anions including a series of nonmetal elements on Pt nanoparticles result in outstanding CO tolerance for electrocatalysts in fuel cells. In particular, phosphorus surface-anion-modified Pt (denoted as P-Pt) possesses more than 10-fold enhancement of CO tolerance (only 8.4% decay) than commercial Pt/C, which can serve as a robust electrocatalyst both in CO poisoning half cells and full cells. Moreover, the general mechanism and principle were proposed, stating that surface anions should be selected preferentially to offer electron feedback to downshift the d-band center for the Pt surface, successfully weakening CO adsorption and leading to high-tolerance capability. We anticipate that surface anions on a Pt surface can bring robust electrocatalysts for practical PEMFCs and offer novel insights for high-performance Pt-based electrocatalysts.

Hydrophilicity gradient in covalent organic frameworks for membrane distillation.

Desalination can help to alleviate the fresh-water crisis facing the world. Thermally driven membrane distillation is a promising way to purify water from a variety of saline and polluted sources by utilizing low-grade heat. However, membrane distillation membranes suffer from limited permeance and wetting owing to the lack of precise structural control. Here, we report a strategy to fabricate membrane distillation membranes composed of vertically aligned channels with a hydrophilicity gradient by engineering defects in covalent organic framework films by the removal of imine bonds. Such functional variation in individual channels enables a selective water transport pathway and a precise liquid-vapour phase change interface. In addition to having anti-fouling and anti-wetting capability, the covalent organic framework membrane on a supporting layer shows a flux of 600 l m-2 h-1 with 85 °C feed at 16 kPa absolute pressure, which is nearly triple that of the state-of-the-art membrane distillation membrane for desalination. Our results may promote the development of gradient membranes for molecular sieving.

Micromechanical Landscape of Three-Dimensional Disordered Graphene Networks.

Disordered carbons can be considered under the modeling framework of disordered graphene networks (DGNs) due to the continuous three-dimensional connectivity and high graphitization. Correlating microstructures and mechanical behaviors of DGNs to their topology is pivotal to revealing more intrinsic features hidden by disorder. Herein, starting from basic deformations and topology, we investigate DGNs with various densities to explore their micromechanical landscape. Both the tension and shear of DGNs exhibit prolonged plastic platforms through local tearing of microstructures. However, compression displays special plastic damages of forming kinklike puckers and sp3-bonded carbon, resulting in a tension-compression asymmetry of DGNs. Out-of-plane topological defects contribute to the main negative-curvature topology in deformed DGNs. Moreover, there are novel scaling laws where both the Young's modulus and strength (logarithms) follow an inversely proportional scaling with respect to average angular defects. Ashby charts demonstrate that the mechanical properties of DGNs can reach the theoretical limit region, surpassing those of most conventional materials.

Bio-Inspired Lotus-Fiber-like Spiral Hydrogel Bacterial Cellulose Fibers.

Hydrogel materials with high water content and good biocompatibility are drawing more and more attention now, especially for biomedical use. However, it still remains a challenge to construct hydrogel fibers with enough strength and toughness for practical applications. Herein, we report a bio-inspired lotus-fiber-mimetic spiral structure hydrogel bacterial cellulose fiber with high strength, high toughness, high stretchability, and energy dissipation, named biomimetic hydrogel fiber (BHF). The spiral-like structure endows BHF with excellent stretchability through plastic deformation and local failure, assisted by the breaking-reforming nature of the hydrogen bonding network among cellulose nanofibers. With the high strength, high stretchability, high energy dissipation, high hydrophilicity, porous structure, and excellent biocompatibility, BHF is a promising hydrogel fiber for biomedicine. The outstanding stretchability and energy dissipation of BHF allow it to absorb energy from the tissue deformation around a wound and effectively protect the wound from rupture, which makes BHF an ideal surgical suture.

Formation and topological structure of three-dimensional disordered graphene networks.

Disordered graphene networks (DGNs) can be regarded as the three-dimensional (3D) assembly of graphene-like fragments at the nanoscale, in which some intrinsic topological features are usually hidden in these formless fragments without clear understanding. Although some high-resolution structural patterns have been observed in pyrolytic carbons and flash graphene experimentally, it is still hard to characterize the topology and texture of DGNs considering continuous 3D connectivity. Toward this end, starting from the annealing process, we herein performed molecular dynamics simulations to investigate the formation and topological structure of DGNs. Three typical stages are found during the formation of DGNs, that is, the formation of polyaromatic fragments, formation of a disordered framework, and further graphitization. The topology of the obtained DGNs was then investigated, including topological defects, stacking behavior, and global curvature. Several typical in-plane and out-of-plane topological defects are found to connect the 3D network of graphene-like layers. The computed X-ray diffraction and angular defects demonstrate that a high-density DGN tends to form a randomly stacked structure with more connections, while a low-density DGN exhibits more bowl-shaped layers and a less distorted curvature. At low annealing temperatures, the local curvature of DGNs is highly distorted, and the structure seems to lack graphitization compared to high-temperature ones.

Anomalously low friction of confined monolayer water with a quadrilateral structure.

In this work, we explored how the structure of monolayer water confined between two graphene sheets is coupled to its dynamic behavior. Our molecular dynamics simulations show that there is a remarkable interrelation between the friction of confined water with two walls and its structure under extreme confinement. When the water molecules formed a regular quadrilateral structure, the friction coefficient is dramatically reduced. Such a low-friction coefficient can be attributed to the formation of long-range ordered hydrogen bond network, which not only decreases the structure corrugation in the direction perpendicular to the walls but also promotes the collective motion of the confined water. The regular quadrilateral structure can be formed only if the number density of confined water falls within a certain range. Higher number density results in larger structure corrugations, which increases the friction, while smaller number density leads to an irregular hydrogen bond network in which the collective motion cannot play the role. We demonstrated that there are four distinct stages in the diagram of the friction coefficient vs the number density of confined water. This research clearly established the connection between the dynamic characteristics of confined monolayer water and its structure, which is beneficial to further understand the mechanism of the high-speed water flow through graphene nanocapillaries observed in recent experiments.

Microfluidic Cytometry for High-Throughput Characterization of Single Cell Cytoplasmic Viscosity Using Crossing Constriction Channels.

This article presents an approach of microfluidic flow cytometry capable of continuously characterizing cytoplasmic viscosities of single cells. The microfluidic system consists of a major constriction channel and a side constriction channel perpendicularly crossing each other. Cells are forced to rapidly travel through the major channel and are partially aspirated into the side channel when passing the channel junction. Numerical simulations were conducted to model the time dependence of the aspiration length into the side channel, which enables the measurement of cytoplasmic viscosity by fitting the model results to experimental data. As a demonstration for high-throughput measurement, the cytoplasmic viscosities of HL-60 cells that were native or treated by N-Formylmethionine-leucyl-phenylalanine (fMLP) were quantified with sample sizes as large as thousands of cells. Both the average and median cytoplasmic viscosities of native HL-60 cells were found to be about 10% smaller than those of fMLP-treated HL-60 cells, consistent with previous observations that fMLP treatment can increase the rigidity of white blood cells. Furthermore, the microfluidic system was used to process granulocytes from three donors (sample size >1,000 cells for each donor). The results revealed that the cytoplasmic viscosity of granulocytes from one donor was significantly higher than the other two, which may result from the fact that this donor just recovered from an inflammation. In summary, the developed microfluidic system can collect cytoplasmic viscosities from thousands of cells and may function as an enabling tool in the field of single-cell analysis. © 2019 International Society for Advancement of Cytometry.

Microscopic Origin of Capillary Force Balance at Contact Line.

We investigate the underlying mechanism of capillary force balance at the contact line. In particular, we offer a novel approach to describe and quantify the capillary force on the liquid in coexistence with its vapor phase, which is crucial in wetting and spreading dynamics. Its relation with the interface tension is elucidated. The proposed model is verified by our molecular dynamics simulations over a wide contact angle range. Differences in capillary forces are observed in evaporating droplets on homogeneous and decorated surfaces. Our findings not only provide a theoretical insight into capillary forces at the contact line, but also validate Young's equation based on a mechanical interpretation.

Shock-induced ejecta transport and breakup in reactive gas.

The transport process of micro-ejecta in reactive gases has recently attracted research attention and interest. Here, we investigate the interaction between shock-induced ejecta of Al and oxygen using a reactive molecular dynamics simulation. The results reveal that metal fragments ejected into reactive gases will quickly increase the temperature of the mixing zone, followed by the deceleration of spikes and a greater shock intensity in the compressed gases, compared with the ejection in inert gases. Moreover, we find that, in vacuum, only a small number of atoms fall out when spherical ejecta particles are finally formed. In the presence of inert gases, several small particles break away from the initial fragments during the transformation of the initially formed strip-shaped fragments into spherical particles, accompanying the detachment of a large number of atoms. When ejecta are transported in reactive gases, the chemical interactions cause more atoms to separate from particles, thus forming smaller fragments and more atomic particles. The research findings show that chemical reactions play an important role in ejecta transport and breakup, which should be considered in future ejecta-transport models for better predictions.

Bimetallic plasmonic Au@Ag nanocuboids for rapid and sensitive detection of phthalate plasticizers with label-free surface-enhanced Raman spectroscopy.

Phthalate plasticizers (PAEs) are posing a serious threat to human health, so it is urgent to develop effective and reliable ways to detect the food additives PAEs sensitively. In this study, we have reported plasmonic bimetallic Au@Ag core-shell nanocuboids for the rapid and sensitive detection of PAEs in liquor samples with a label-free Surface-enhanced Raman Spectroscopy (SERS) strategy. Compared with single-element nanostructures, the bimetallic SERS platform can integrate two distinct functions into a single entity with unprecedented properties. Consequently, we synthesized Au@Ag nanocuboids (Au@Ag NCs) composed of a Au nanorod (Au NR) core and a Ag cuboid shell, which could produce richer and broader plasmonic resonance modes than Au NRs. It is obvious that the SERS signals of crystal violet (CV) and butyl benzyl phthalate (BBP) reached a maximum as the thickness of the Ag coating shell was in a certain threshold and there was a strong dependence of the Raman enhancement on the Ag cuboid shell-thickness. Based on the optimized size, the sensitivity and repeatability of Au@Ag NCs were evaluated with limits of detection (LODs) at around 10-9 M both for BBP and diethylhexyl phthalate (DEHP). In addition, the SERS active substrate core-shell Au@Ag NCs can be used to detect BBP as low as 1.3 mg kg-1 spiked into the liquor samples. Thereby, the unique bimetallic Au@Ag NCs showed a huge potential for the rapid and sensitive detection of PAEs in liquor samples.

Structural and dynamic characteristics in monolayer square ice.

When water is constrained between two sheets of graphene, it becomes an intriguing monolayer solid with a square pattern due to the ultrahigh van der Waals pressure. However, the square ice phase has become a matter of debate due to the insufficient experimental interpretation and the slightly rhomboidal feature in simulated monolayer square-like structures. Here, we performed classical molecular dynamics simulations to reveal monolayer square ice in graphene nanocapillaries from the perspective of structure and dynamic characteristics. Monolayer square-like ice (instantaneous snapshot), assembled square-rhombic units with stacking faults, is a long-range ordered structure, in which the square and rhombic units are assembled in an order of alternative distribution, and the other rhombic unit forms stacking faults (polarized water chains). Spontaneous flipping of water molecules in monolayer square-like ice is intrinsic and induces transformations among different elementary units, resulting in the structural evolution of monolayer square ice in dynamics. The existence of stacking faults should be attributed to the spontaneous flipping behavior of water molecules under ambient temperature. Statistical averaging results (thermal average positions) demonstrate the inherent square characteristic of monolayer square ice. The simulated data and insight obtained here might be significant for understanding the topological structure and dynamic behavior of monolayer square ice.