Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 14 de 14
Filtrar
1.
Nature ; 625(7996): 697-702, 2024 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-38172639

RESUMO

Body-centred cubic refractory multi-principal element alloys (MPEAs), with several refractory metal elements as constituents and featuring a yield strength greater than one gigapascal, are promising materials to meet the demands of aggressive structural applications1-6. Their low-to-no tensile ductility at room temperature, however, limits their processability and scaled-up application7-10. Here we present a HfNbTiVAl10 alloy that shows remarkable tensile ductility (roughly 20%) and ultrahigh yield strength (roughly 1,390 megapascals). Notably, these are among the best synergies compared with other related alloys. Such superb synergies derive from the addition of aluminium to the HfNbTiV alloy, resulting in a negative mixing enthalpy solid solution, which promotes strength and favours the formation of hierarchical chemical fluctuations (HCFs). The HCFs span many length scales, ranging from submicrometre to atomic scale, and create a high density of diffusive boundaries that act as effective barriers for dislocation motion. Consequently, versatile dislocation configurations are sequentially stimulated, enabling the alloy to accommodate plastic deformation while fostering substantial interactions that give rise to two unusual strain-hardening rate upturns. Thus, plastic instability is significantly delayed, which expands the plastic regime as ultralarge tensile ductility. This study provides valuable insights into achieving a synergistic combination of ultrahigh strength and large tensile ductility in MPEAs.

2.
Phys Rev Lett ; 131(13): 136101, 2023 Sep 29.
Artigo em Inglês | MEDLINE | ID: mdl-37832014

RESUMO

Twinning is profuse in bcc transition metals (TMs) except bulk W and Mo. However, W and Mo nanocrystals surprisingly exhibit twinning during room temperature compression, which is completely unexpected as established nucleation mechanisms are not viable in them. Here, we reveal the physical origin of deformation twinning in W and Mo. We employ density functional theory (DFT) and a reduced-constraint slip method to compute the stress-dependent generalized stacking fault enthalpy (GSFH), the thermodynamic quantity to be minimized under constant loading. The simple slipped structures and GSFH lines show that compressive stresses stabilize a two-layer twin embryo, which can grow rapidly via twinning disconnections with negligible energy barriers. Direct atomistic simulations unveil the explicit twinning path in agreement with the DFT GSFH lines. Twinning is thus the preferred deformation mechanism in W and Mo when shear stresses are coupled with high compressive stresses. Furthermore, twinnability can be related to the elastic constants of a stacking fault phase (SFP). The hcp phase may serve as a candidate SFP for the {112}⟨1[over ¯]1[over ¯]1⟩ twinning system in bcc TMs and alloys, which is coincident with the {111}⟨112[over ¯]⟩ twinning in fcc structures.

3.
Nature ; 526(7571): 62-7, 2015 Oct 01.
Artigo em Inglês | MEDLINE | ID: mdl-26390153

RESUMO

Magnesium is a lightweight structural metal but it exhibits low ductility-connected with unusual, mechanistically unexplained, dislocation and plasticity phenomena-which makes it difficult to form and use in energy-saving lightweight structures. We employ long-time molecular dynamics simulations utilizing a density-functional-theory-validated interatomic potential, and reveal the fundamental origins of the previously unexplained phenomena. Here we show that the key 〈c + a〉 dislocation (where 〈c + a〉 indicates the magnitude and direction of slip) is metastable on easy-glide pyramidal II planes; we find that it undergoes a thermally activated, stress-dependent transition to one of three lower-energy, basal-dissociated immobile dislocation structures, which cannot contribute to plastic straining and that serve as strong obstacles to the motion of all other dislocations. This transition is intrinsic to magnesium, driven by reduction in dislocation energy and predicted to occur at very high frequency at room temperature, thus eliminating all major dislocation slip systems able to contribute to c-axis strain and leading to the high hardening and low ductility of magnesium. Enhanced ductility can thus be achieved by increasing the time and temperature at which the transition from the easy-glide metastable dislocation to the immobile basal-dissociated structures occurs. Our results provide the underlying insights needed to guide the design of ductile magnesium alloys.

4.
Proc Natl Acad Sci U S A ; 113(40): 11137-11142, 2016 10 04.
Artigo em Inglês | MEDLINE | ID: mdl-27647908

RESUMO

Hexagonal close-packed (hcp) metals such as Mg, Ti, and Zr are lightweight and/or durable metals with critical structural applications in the automotive (Mg), aerospace (Ti), and nuclear (Zr) industries. The hcp structure, however, brings significant complications in the mechanisms of plastic deformation, strengthening, and ductility, and these complications pose significant challenges in advancing the science and engineering of these metals. In hcp metals, generalized plasticity requires the activation of slip on pyramidal planes, but the structure, motion, and cross-slip of the associated [Formula: see text] dislocations are not well established even though they determine ductility and influence strengthening. Here, atomistic simulations in Mg reveal the unusual mechanism of [Formula: see text] dislocation cross-slip between pyramidal I and II planes, which occurs by cross-slip of the individual partial dislocations. The energy barrier is controlled by a fundamental step/jog energy and the near-core energy difference between pyramidal [Formula: see text] dislocations. The near-core energy difference can be changed by nonglide stresses, leading to tension-compression asymmetry and even a switch in absolute stability from one glide plane to the other, both features observed experimentally in Mg, Ti, and their alloys. The unique cross-slip mechanism is governed by common features of the generalized stacking fault energy surfaces of hcp pyramidal planes and is thus expected to be generic to all hcp metals. An analytical model is developed to predict the cross-slip barrier as a function of the near-core energy difference and applied stresses and quantifies the controlling features of cross-slip and pyramidal I/II stability across the family of hcp metals.

5.
Nano Lett ; 14(10): 5858-64, 2014 Oct 08.
Artigo em Inglês | MEDLINE | ID: mdl-25198652

RESUMO

The emergence of size-dependent mechanical strength in nanosized materials is now well-established, but no fundamental understanding of fracture toughness or flaw sensitivity in nanostructures exists. We report the fabrication and in situ fracture testing of ∼70 nm diameter Ni-P metallic glass samples with a structural flaw. Failure occurs at the structural flaw in all cases, and the failure strength of flawed samples was reduced by 40% compared to unflawed samples. We explore deformation and failure mechanisms in a similar nanometallic glass via molecular dynamics simulations, which corroborate sensitivity to flaws and reveal that the structural flaw shifts the failure mechanism from shear banding to cavitation. We find that failure strength and deformation in amorphous nanosolids depend critically on the presence of flaws.

6.
Nano Lett ; 13(11): 5703-9, 2013.
Artigo em Inglês | MEDLINE | ID: mdl-24168654

RESUMO

Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices with nanoscale components. No consensus exists on the effect of flaws on fracture at the nanoscale, but proposed theories include nanoscale flaw tolerance and maintaining macroscopic fracture relationships at the nanoscale with scarce experimental support. We explore fracture in nanomaterials using nanocrystalline Pt nanocylinders with prefabricated surface notches created using a "paused" electroplating method. In situ scanning electron microscopy (SEM) tension tests demonstrate that the majority of these samples failed at the notches, but that tensile failure strength is independent of whether failure occurred at or away from the flaw. Molecular dynamics simulations verify these findings and show that local plasticity is able to reduce stress concentration ahead of the notch to levels comparable with the strengths of microstructural features (e.g., grain boundaries). Thus, failure occurs at the stress concentration with the highest local stress whether this is at the notch or a microstructural feature.


Assuntos
Materiais Biocompatíveis/química , Nanopartículas/química , Nanoestruturas/química , Microscopia Eletrônica de Varredura , Simulação de Dinâmica Molecular , Estresse Mecânico , Propriedades de Superfície , Resistência à Tração
7.
Nano Lett ; 12(2): 910-4, 2012 Feb 08.
Artigo em Inglês | MEDLINE | ID: mdl-22214242

RESUMO

Experimental studies of the tensile behavior of metallic nanowires show a wide range of failure modes, ranging from ductile necking to brittle/localized shear failure-often in the same diameter wires. We performed large-scale molecular dynamics simulations of copper nanowires with a range of nanowire lengths and provide unequivocal evidence for a transition in nanowire failure mode with change in nanowire length. Short nanowires fail via a ductile mode with serrated stress-strain curves, while long wires exhibit extreme shear localization and abrupt failure. We developed a simple model for predicting the critical nanowire length for this failure mode transition and showed that it is in excellent agreement with both the simulation results and the extant experimental data. The present results provide a new paradigm for the design of nanoscale mechanical systems that demarcates graceful and catastrophic failure.


Assuntos
Cobre/química , Nanofios/química , Simulação de Dinâmica Molecular , Propriedades de Superfície
8.
Nano Lett ; 12(12): 6385-92, 2012 Dec 12.
Artigo em Inglês | MEDLINE | ID: mdl-23148764

RESUMO

We report the synthesis, mechanical properties, and deformation mechanisms of polycrystalline, platinum nanocylinders of grain size d = 12 nm. The number of grains across the diameter, D/d, was varied from 5 to 80 and 1.5 to 5 in the experiments and molecular dynamics simulations, respectively. An abrupt weakening is observed at a small D/d, while the strengths of large nanopillars are similar to bulk. This "smaller is weaker" trend is opposite to the "smaller is stronger" size effect in single crystalline nanostructures. The simulations demonstrate that the size-dependent behavior is associated with the distinct deformation mechanisms operative in interior versus surface grains.

9.
Sci Adv ; 9(41): eadi5817, 2023 Oct 13.
Artigo em Inglês | MEDLINE | ID: mdl-37831772

RESUMO

Understanding the relationship among elemental compositions, nanolamellar microstructures, and mechanical properties enables the rational design of high-entropy alloys (HEAs). Here, we construct nanolamellar AlxCoCuFeNi HEAs with alternating high- and low-Al concentration layers and explore their mechanical properties using a combination of molecular dynamic simulation and density functional theory calculation. Our results show that the HEAs with nanolamellar structures exhibit ideal plastic behavior during uniaxial tensile loading, a feature not observed in homogeneous HEAs. This remarkable ideal plasticity is attributed to the unique deformation mechanisms of phase transformation coupled with dislocation nucleation and propagation in the high-Al concentration layers and the confinement and slip-blocking effect of the low-Al concentration layers. Unexpectedly, this ideal plasticity is fully reversible upon unloading, leading to a remarkable shape memory effect. Our work highlights the importance of nanolamellar structures in controlling the mechanical and functional properties of HEAs and presents a fascinating route for the design of HEAs for both functional and structural applications.

10.
Nat Commun ; 12(1): 4953, 2021 Aug 16.
Artigo em Inglês | MEDLINE | ID: mdl-34400654

RESUMO

Simultaneously enhancing strength and ductility of metals and alloys has been a tremendous challenge. Here, we investigate a CoCuFeNiPd high-entropy alloy (HEA), using a combination of Monte Carlo method, molecular dynamic simulation, and density-functional theory calculation. Our results show that this HEA is energetically favorable to undergo short-range ordering (SRO), and the SRO leads to a pseudo-composite microstructure, which surprisingly enhances both the ultimate strength and ductility. The SRO-induced composite microstructure consists of three categories of clusters: face-center-cubic-preferred (FCCP) clusters, indifferent clusters, and body-center-cubic-preferred (BCCP) clusters, with the indifferent clusters playing the role of the matrix, the FCCP clusters serving as hard fillers to enhance the strength, while the BCCP clusters acting as soft fillers to increase the ductility. Our work highlights the importance of SRO in influencing the mechanical properties of HEAs and presents a fascinating route for designing HEAs to achieve superior mechanical properties.

11.
Nanoscale ; 11(36): 17084-17092, 2019 Sep 19.
Artigo em Inglês | MEDLINE | ID: mdl-31506661

RESUMO

Developing economic, effective and stable bifunctional electrocatalysts to achieve sustainable hydrogen production is highly desired. Herein, C-coated CoP hollow microporous nanocages (C-CoP-1/12) are synthesized by calcination of a Prussian blue analog precursor and subsequent phosphorization treatment. Under alkaline condition, the C-CoP-1/12 exhibit splendid electrocatalytic performance with a low overpotential of 173 mV for hydrogen evolution reaction (HER) and 333 mV for oxygen evolution reaction (OER) at a current density of 10 mA cm-2. The C-CoP-1/12 show high electrocatalytic performance for overall water splitting at a low potential of only 1.650 V for the driving current density of 10 mA cm-2, and they exhibit remarkable stability for at least 24 h. The engineering of phosphating is the critical step for the synthesis of pure-phase CoP with hollow nanoarchitecture. Compared with Co2P, CoP possesses lower water dissociation barrier and favorable ΔGH* value according to theoretical calculations, resulting in superior electrocatalytic performance. Such impressive water splitting performance is mainly attributed to the collective effects of metal phosphide with unique electronic structure, the shortened electron transport paths, and the conductive C coating. This strategy is believed to provide a basis for the development of electrode materials with highly efficient electrocatalytic water-splitting capability.

12.
Science ; 359(6374): 447-452, 2018 Jan 26.
Artigo em Inglês | MEDLINE | ID: mdl-29371467

RESUMO

Pure magnesium exhibits poor ductility owing to pyramidal [Formula: see text] dislocation transformations to immobile structures, making this lowest-density structural metal unusable for many applications where it could enhance energy efficiency. We show why magnesium can be made ductile by specific dilute solute additions, which increase the [Formula: see text] cross-slip and multiplication rates to levels much faster than the deleterious [Formula: see text] transformation, enabling both favorable texture during processing and continued plastic straining during deformation. A quantitative theory establishes the conditions for ductility as a function of alloy composition in very good agreement with experiments on many existing magnesium alloys, and the solute-enhanced cross-slip mechanism is confirmed by transmission electron microscopy observations in magnesium-yttrium. The mechanistic theory can quickly screen for alloy compositions favoring conditions for high ductility and may help in the development of high-formability magnesium alloys.

13.
Neurosci Lett ; 653: 183-188, 2017 Jul 13.
Artigo em Inglês | MEDLINE | ID: mdl-28554861

RESUMO

Galantamine, which is currently used in the treatment of Alzheimer's disease (AD), has been shown to exert a neuroprotective effect against beta-amyloid (Aß) peptide-induced toxicity, a critical component involved in the pathogenesis of AD. The aim of this study was to examine the effects of galantamine on proliferation, senescence and ROS production in a U87 cell line treated with Aß. With the use of a Cell Counting Kit-8 and ß galactosidase staining assay, we observed that galantamine (0.3µM) pretreatment significantly prevented Aß1-40-induced cell degradation and senescence. Aß1-40-induced ROS production and p53 expression were increased as determined by DCF-derived fluorescence using flow cytometry and Western blotting and reduced in response to galantamine pretreatment. Overall, we found that all alterations resulting from Aß1-40 were reversed by galantamine pretreatment. In addition, we demonstrate that this neuroprotection from galantamine can be blocked by an α7 nAChR antagonist. Taken together, the findings of this study provide a better understanding of the mechanisms underlying the protective effects of galantamine, effects which include antioxidative properties.


Assuntos
Peptídeos beta-Amiloides/toxicidade , Senescência Celular/efeitos dos fármacos , Galantamina/administração & dosagem , Fármacos Neuroprotetores/administração & dosagem , Fragmentos de Peptídeos/toxicidade , Espécies Reativas de Oxigênio/metabolismo , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Humanos , Peroxidação de Lipídeos , Receptor Nicotínico de Acetilcolina alfa7/antagonistas & inibidores
14.
Exp Gerontol ; 72: 244-50, 2015 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-26521029

RESUMO

While galantamine may not provide a cure for Alzheimer's disease (AD), it decelerates the progression and provides symptomatic relief for this disorder. The aim of this study was to investigate the effect of chronic galantamine treatment on cognitive performance, Aß deposition and astrocyte activation in the transgenic APP/PS1 mouse model of AD. Galantamine (5mg/kg, i.p.) or 0.9% saline was administrated twice daily for eight weeks in 10-month-old APP/PS1 mice. In addition a separate group of 10-month old male C57BL/6 wild type mice was included as a reference control. Compared with saline treated APP/PS1 mice, galantamine treated mice exhibited significantly improved escape latencies on Days 6 and 7 of testing (p<0.05) and significantly decreased numbers of platform crossings (p<0.01) as assessed in the Morris water maze. Galantamine reduced the total area of amyloid load within the hippocampus of transgenic APP/PS1 mice, inhibited astrocyte activation as assessed by immunohistochemistry and decreased intracellular TNF-α and IL-6 expression as determined by immunofluorescence. Galantamine failed to alter hippocampal levels of TNF-α and IL-6 as assayed by ELISA. Galantamine may be involved in modifying AD pathophysiological mechanisms by alleviating Aß deposition and neuroinflammation. The results from this study provide new evidence for use of galantamine in the treatment of AD.


Assuntos
Doença de Alzheimer/tratamento farmacológico , Peptídeos beta-Amiloides/metabolismo , Astrócitos/efeitos dos fármacos , Galantamina/administração & dosagem , Interleucina-6/metabolismo , Aprendizagem em Labirinto/efeitos dos fármacos , Fator de Necrose Tumoral alfa/metabolismo , Animais , Modelos Animais de Doenças , Hipocampo/efeitos dos fármacos , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Transgênicos , Neurogênese/efeitos dos fármacos
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA