Metal-Organic Framework Templated Z-Scheme ZnIn2S4/Bi2S3 Hierarchical Heterojunction for Photocatalytic H2O2 Production from Wastewater.

Metal-organic framework derived materials received a lot of attention due to their significant benefits in photocatalytic reactions. In this work, a Z-scheme ZnIn2S4/Bi2S3 hierarchical heterojunction is first developed by a one-pot method using CAU-17 as a template. The specific preparation method endows an intimate interface contact between these two monomers, and CAU-17-derived Bi2S3 possesses a high surface area and porosity, resulting in an efficient charge separation and O2 capture. Thus, for photocatalytic H2O2 production from the O2 reduction reaction, the ZnIn2S4/Bi2S3 heterojunction can achieve an H2O2 yield of 995 µmol L-1 in pure water and ambient air under visible light, 4.5 and 4 times that of ZnIn2S4 and Bi2S3, respectively. In addition, in tetracycline solution, ZnIn2S4/Bi2S3 can degrade tetracycline with a degradation rate of 95% by photocatalysis, and at the same time, a final H2O2 production yield of 1223 µmol L-1 is reached. Similarly, high yields of H2O2 are also obtained from wastewater containing o-nitrophenol, acid golden yellow, or acid red, and these pollutants are effectively degraded. This work reveals the potential of metal-organic framework-derived materials in photocatalysis, as well as provides insights into H2O2 green synthesis and wastewater treatment.

Carboxylated cellulose-derived carbon mediated flower-like bismuth oxyhalides for efficient Cr(VI) reduction under visible light.

Exquisitely tailoring the morphologies of photocatalysts could achieve high activities. In this study, the morphological transformation of bismuth oxyhalide (BiOX, X = Br, I and Cl) from disordered lamellae to regular flowers was facilely achieved via the use of carboxylated cellulose-derived carbon (CDC). The sphere-like structure and abundant surface functional groups of CDC induce the formation of such flower-like morphologies of BiOX/CDC, and this morphology results in a pronounced increase in surface area (e.g., the surface area of BiOBr increases from 3 to 106 m2 g-1) and porosity. Combined with the good light absorption and conductivity of CDC, the flower-like BiOX/CDC exhibited impressive photocatalytic activity under visible light. Regarding the probing Cr(VI) reduction reaction, the representative BiOBr/CDC is capable of reducing 98% of Cr(VI) within 30 min of visible-light illumination, which is markedly greater than those of pure BiOBr (6%) and CDC (16%). Likewise, BiOI/CDC and BiOCl/CDC also have decent photocatalytic Cr(VI) reduction capacities (89% for BiOI/CDC and 69% for BiOCl/CDC) under visible light in comparison with pristine BiOI (13%) and BiOCl (1.5%). This work furnishes a novel and facile approach to tune photocatalyst morphologies and sheds light on the great potential of biomass-derived carbon, which may enlighten the judicious design of photocatalysts with high efficiency.

Interspersing CdS nanodots into iodine vacancy-rich BiOI sphere for photocatalytic lignin valorization.

Flower-like BiOI was decorated by CdS nanodots and followed by the introduction of iodine vacancies (VI) for photocatalytic sodium lignosulfonate (SLS) valorization under visible light. The iodine vacancies could adjust the band configuration, strengthen the light absorption and act as electron traps, while the intimate contact between BiOI and CdS nanodots provides a high-speed channel for charge transfer. As a consequence, the photocatalytic performance of SLS conversion into value-added vanillin was greatly improved over CdS/BiOI-VI compared with those of CdS, BiOI and CdS/BiOI. The highest yield of vanillin is 10.95 mg/gSLS over CdS/BiOI-VI, about 5, 8.7, 1.3 times those of CdS, BiOI, CdS/BiOI, respectively, and exceeding most related photocatalysts reported elsewhere. More significantly, as to the lignin from Masson pine and alkali lignin, the corresponding vanillin yield can reach 7.04 and 6.54 mg/glignin, respectively, under the same condition, which suggests the great potential and universality for photocatalytic lignin valorization over such CdS/BiOI-VI heterostructure.

Cellulose-Derived Carbon Dot-Guided Growth of ZnIn2 S4 Nanosheets for Photocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran.

Cellulose-derived carbon (CC) dot-directed growth of ZnIn2 S4 was achieved through hydrothermal treatment of carboxylated cellulose followed by in situ growth of ZnIn2 S4 nanosheets. The carbon dots inherited from carboxylated cellulose equip plenty of surface carboxyl groups, which induce the ionic interaction with Zn2+ and In3+ and the guided growth of ZnIn2 S4 . As a result, the nanosheets of ZnIn2 S4 are evenly and intimately grown on the small carbon dots, providing high-speed channels for charges transfer. In conjunction with the reinforced visible-light capture and good conductivity of carbon dots, the resultant CC/ZnIn2 S4 shows an outstanding photocatalytic activity. As a proof-of-concept, visible-light-driven 5-hydroxymethylfurfural oxidation into 2,5-diformylfuran was conducted. The evolution of 2,5-diformylfuran over the optimal CC/ZnIn2 S4 sample can reach ∼2980 µmol g-1 , about 3.4 times that of pristine ZnIn2 S4 . Additionally, the apparent quantum yield could attain 3.4 % at a wavelength of 400 nm.