RESUMO
The correlation between the magnetocaloric effect and magnetotransport property was investigated in Ni43Co7Mn39-xCrxSn11 Heusler alloys. The asymmetric isothermal-magnetoresistance around the phase transformation temperature was observed, from which a parameter γ, determined as the ratio of the asymmetric magnetoresistance to the temperature coefficient of resistance, is proposed. According to Maxwell's equation, the parameter γ is analyzed to be equivalent to the transformation temperature change induced by a magnetic field in martensitic transformation. This finding is confirmed by experimental results. In addition, the γ values can be used to estimate the magnetic entropy change of the martensitic transformation directly without measuring the comprehensive temperature dependence of magnetization curves.
RESUMO
Manipulation of magnetization by electric field is a central goal of spintronics because it enables energy-efficient operation of spin-based devices. Spin wave devices are promising candidates for low-power information processing, but a method for energy-efficient excitation of short-wavelength spin waves has been lacking. Here we show that spin waves in nanoscale magnetic tunnel junctions can be generated via parametric resonance induced by electric field. Parametric excitation of magnetization is a versatile method of short-wavelength spin wave generation, and thus, our results pave the way toward energy-efficient nanomagnonic devices.
RESUMO
Using electrical detection of a strongly coupled spin-photon system comprised of a microwave cavity mode and two magnetic samples, we demonstrate the long distance manipulation of spin currents. This distant control is not limited by the spin diffusion length, instead depending on the interplay between the local and global properties of the coupled system, enabling systematic spin current control over large distance scales (several centimeters in this work). This flexibility opens the door to improved spin current generation and manipulation for cavity spintronic devices.
RESUMO
Coherent spin waves possess immense potential in wave-based information computation, storage, and transmission with high fidelity and ultra-low energy consumption. However, despite their seminal importance for magnonic devices, there is a paucity of both structural prototypes and theoretical frameworks that regulate the spin current transmission and magnon hybridization mediated by coherent spin waves. Here, we demonstrate reconfigurable coherent spin current transmission, as well as magnon-magnon coupling, in a hybrid ferrimagnetic heterostructure comprising epitaxial Gd3Fe5O12 and Y3Fe5O12 insulators. By adjusting the compensated moment in Gd3Fe5O12, magnon-magnon coupling was achieved and engineered with pronounced anticrossings between two Kittel modes, accompanied by divergent dissipative coupling approaching the magnetic compensation temperature of Gd3Fe5O12 (TM,GdIG), which were modeled by coherent spin pumping. Remarkably, we further identified, both experimentally and theoretically, a drastic variation in the coherent spin wave-mediated spin current across TM,GdIG, which manifested as a strong dependence on the relative alignment of magnetic moments. Our findings provide significant fundamental insight into the reconfiguration of coherent spin waves and offer a new route towards constructing artificial magnonic architectures.
RESUMO
The depletion of traditional energy resources as well as the desire to reduce high CO(2) emissions associated with energy production means that energy storage is now becoming more important than ever. New functional electrode materials are urgently needed for next-generation energy storage systems, such as supercapacitors or batteries, to meet the ever increasing demand for higher energy and power densities. Advances in nanotechnology are essential to meet those future challenges. It is critical to develop ways of synthesizing new nanomaterials with enhanced properties or combinations of properties to meet future challenges. In this Minireview we discuss several important recent studies in developing nanostructured pseudocapacitor electrodes, and summarize three major parameters that are the most important in determining the performance of electrode materials. A technique to optimize these parameters simultaneously and to achieve both high energy and power densities is also introduced.
RESUMO
With recent advances in two-dimensional (2D) ferromagnets with enhanced Curie temperatures, it is possible to develop all-2D spintronic devices with high-quality interfaces using 2D ferromagnets. In this study, we have successfully fabricated nonlocal spin valves with Fe3GeTe2 (FGT) as the spin source and detector and multilayer graphene as the spin transport channel. The nonlocal spin transport signal was found to strongly depend on temperature and disappear at a temperature below the Curie temperature of the FGT flakes, which stemmed from the temperature-dependent ferromagnetism of FGT. The spin injection efficiency was estimated to be about 1%, close to that of conventional nonlocal spin valves with transparent contacts between ferromagnetic electrodes and the graphene channel. In addition, the spin transport signal was found to depend on the direction of the magnetic field and the magnitude of the current, which was due to the strong perpendicular magnetic anisotropy of FGT and the thermal effect, respectively. Our results provide opportunities to extend the applications of van der Waals heterostructures in spintronic devices.
RESUMO
Two-dimensional (2D) magnetic van der Waals materials provide a powerful platform for studying the fundamental physics of low-dimensional magnetism, engineering novel magnetic phases, and enabling thin and highly tunable spintronic devices. To realize high-quality and practical devices for such applications, there is a critical need for robust 2D magnets with ordering temperatures above room temperature that can be created via exfoliation. Here, the study of exfoliated flakes of cobalt-substituted Fe5GeTe2 (CFGT) exhibiting magnetism above room temperature is reported. Via quantum magnetic imaging with nitrogen-vacancy centers in diamond, ferromagnetism at room temperature was observed in CFGT flakes as thin as 16 nm corresponding to 16 layers. This result expands the portfolio of thin room-temperature 2D magnet flakes exfoliated from robust single crystals that reach a thickness regime relevant to practical spintronic applications. The Curie temperature Tc of CFGT ranges from 310 K in the thinnest flake studied to 328 K in the bulk. To investigate the prospect of high-temperature monolayer ferromagnetism, Monte Carlo calculations were performed, which predicted a high value of Tc of â¼270 K in CFGT monolayers. Pathways toward further enhancing monolayer Tc are discussed. These results support CFGT as a promising platform for realizing high-quality room-temperature 2D magnet devices.
RESUMO
Nanowire arrays can be conveniently fabricated by electrodeposition methods using porous anodized alumina oxide templates. They have found applications in numerous fields. Nanotube arrays, with their hollow structure and much enhanced surface-to-volume ratio, as well as an additional tuning parameter in tube wall thickness, promise additional functions compared with nanowire arrays. Using a similar fabrication method, we have developed a facile and general method to fabricate metallic nanotubes (NTs). Using Ni NTs as a model system, the mechanism of the hydrogen-assisted NT growth was postulated and confirmed by controlling the hydrogen formation with conductive salts in an electrodeposition solution, which improves the H2 concentration but prevents the large H2 bubbles from blocking the nanochannel of a template. The controlled hydrogen generation forces the growth along the wall of nanochannels in the templates, leading to the NT formation. The magnetic properties can be controlled by the NT wall thickness, making these NTs useful for various applications.
RESUMO
Unlike previous studies that emphasize the important role of thermodynamics or surface energy on the structure stabilization of ZnS nanocrystals, we successfully controlled the crystalline structure of ZnS nanocrystals simply by tuning sulfur precursor addition rate under exactly the same other conditions. We observed the structure of as prepared ZnS nanocrystals was evolved from wurtzite into zinc blende with increasing the addition rate of sulfur precursor. The method may extend to engineer other nanomaterials with desired physicochemical properties by controlling crystalline structure. On the other hand, it also makes a new approach to understand the crucial factors that determine the growth mechanism and the crystal structure of nanomaterials in theory.
RESUMO
An ultrafast vector magneto-optical Kerr effect (MOKE) microscope with integrated time-synchronized electrical pulses, two-dimensional magnetic fields, and low-temperature capabilities is reported. The broad range of capabilities of this instrument allows the comprehensive study of spin-orbital interaction-driven magnetization dynamics in a variety of novel magnetic materials or heterostructures: (1) electrical-pump and optical-probe spectroscopy allows the study of current-driven magnetization dynamics in the time domain, (2) two-dimensional magnetic fields along with the vector MOKE microscope allow the thorough study of the spin-orbital-interaction induced magnetization re-orientation in arbitrary directions, and (3) the low-temperature capability allows us to explore novel materials/devices where emergent phenomena appear at low temperature. We discuss the details and challenges of this instrument development and integration and present two datasets that demonstrate and benchmark the capabilities of this instrument: (a) a room-temperature time-domain study of current-induced magnetization dynamics in a ferromagnet/heavy metal bilayer and (b) a low-temperature quasi-static polar MOKE study of the magnetization of a novel compensated ferrimagnet.
RESUMO
The electronic structure and magnetic properties of Co-doped CeO(2) are theoretically investigated by first principles calculations based on the density functional theory + U (DFT+U) methods, using the WIEN2k package. With the presence of oxygen vacancies (V(O)) in CeO(2), d and f orbits of Ce are obviously pulled closer to the Fermi level, but without spin polarization. On the other hand, in Co-doped CeO(2), V(O) defects can lead to strong ferromagnetic coupling between the nearest neighboring Co ions. Such ferromagnetic exchange coupling is mainly attributed to spin splitting of Co 3d states, via electrons trapped in V(O). The results provide direct evidence for the F-center mediated exchange interaction in oxide-based magnetic semiconductors.
RESUMO
The spin Hall effect couples charge and spin transport1-3, enabling electrical control of magnetization4,5. A quintessential example of spin-Hall-related transport is the anomalous Hall effect (AHE)6, first observed in 1880, in which an electric current perpendicular to the magnetization in a magnetic film generates charge accumulation on the surfaces. Here, we report the observation of a counterpart of the AHE that we term the anomalous spin-orbit torque (ASOT), wherein an electric current parallel to the magnetization generates opposite spin-orbit torques on the surfaces of the magnetic film. We interpret the ASOT as being due to a spin-Hall-like current generated with an efficiency of 0.053 ± 0.003 in Ni80Fe20, comparable to the spin Hall angle of Pt7. Similar effects are also observed in other common ferromagnetic metals, including Co, Ni and Fe. First-principles calculations corroborate the order of magnitude of the measured values. This work suggests that a strong spin current with spin polarization transverse to the magnetization can be generated within a ferromagnet, despite spin dephasing8. The large magnitude of the ASOT should be taken into consideration when investigating spin-orbit torques in ferromagnetic/non-magnetic bilayers.
RESUMO
Rapid development and application of nanomaterials and nanotechnology make assessment of their potential health and environmental impacts on humans, non-human biota, and ecosystems imperative. Here we show that pumpkin plants (Cucurbita maxima), grown in an aqueous medium containing magnetite (Fe3O4) nanoparticles, can absorb, translocate, and accumulate the particles in the plant tissues. These results suggest that plants, as an important component of the environmental and ecological systems, need to be included when evaluating the overall fate, transport and exposure pathways of nanoparticles in the environment.
Assuntos
Cucurbita/efeitos dos fármacos , Monitoramento Ambiental/métodos , Óxido Ferroso-Férrico/toxicidade , Nanopartículas/toxicidade , Raízes de Plantas/efeitos dos fármacos , Poluentes do Solo/toxicidade , Poluentes Químicos da Água/toxicidade , Absorção , Biodiversidade , Cucurbita/fisiologia , Ecossistema , Óxido Ferroso-Férrico/análise , Nanopartículas/análise , Raízes de Plantas/fisiologia , Medição de Risco , Espalhamento de Radiação , Poluentes do Solo/análise , Poluentes Químicos da Água/análiseRESUMO
Modification of various properties of graphene oxide (GO) films on SiO2/Si substrate under KrF laser radiation was extensively studied. X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy and the electrical resistance measurements were employed to correlate the effects of laser irradiation on structural, chemical and electrical properties of GO films under different laser fluences. Raman spectroscopy shows reduced graphene oxide patterns with increased I 2D/I G ratios in irradiated samples. X-ray photoelectron spectroscopy shows a high ratio of carbon to oxygen atoms in the reduced graphene oxide (rGO) films compared to the pristine GO films. X-ray diffraction patterns display a significant drop in the diffraction peak intensity after laser irradiation. Finally, the electrical resistance of irradiated GO films reduced by about four orders of magnitudes compared to the unirradiated GO films. Simultaneously, reduction and patterning of GO films display promising fabrication technique that can be useful for many graphene-based devices.
RESUMO
Fe-Co-Ni gradient-diameter magnetic nanowire arrays were fabricated via direct-current electrodeposition into a tapered anodic aluminium oxide template. In contrast to the magnetic behaviors of uniform-diameter nanowire arrays, these arrays exhibited tailorable magnetic anisotropy that can be used to switch magnetic nanowires easily and unconventional temperature-dependent coercivity with much better thermal stability.
RESUMO
We report the room-temperature (RT) ferromagnetism (FM) observed in pure and Co doped CeO(2) powder. An insulating nonmagnetic CeO(2) single crystal, after grinding into fine powder, shows an RT-FM with a small magnetization of 0.0045 emu g(-1). However, the CeO(2) powder became paramagnetic after oxygen annealing, which strongly suggests an oxygen vacancy meditated FM ordering. Furthermore, by doping Co into CeO(2) powder the FM can significantly enhance through a F-centre exchange (FCE) coupling mechanism, in which both oxygen vacancies and magnetic ions are involved. As the Co content increases, the FM of Co doped CeO(2) initially increases to a maximum 0.47 emu g(-1), and then degrades very quickly. The complex correlation between the Co content and saturation magnetization was well interpreted by supposing the coexistence of three subsets of Co ions in CeO(2). Our results reveal that the large RT-FM observed in Co doped CeO(2) powder originates from a combination effect of oxygen vacancies and transition metal doping.
RESUMO
Spin Seebeck effect (SSE) measured for metallic ferromagnetic thin films in commonly used longitudinal configuration contains the contribution from anomalous Nernst effect (ANE). The ANE is considered to arise from the bulk of the ferromagnet (FM) and the proximity-induced FM boundary layer. We fabricate a FM alloy with zero Nernst coefficient to mitigate the ANE contamination of SSE and insert a thin layer of Cu to separate the heavy metal (HM) from the FM to avoid the proximity contribution. These modifications to the experiment should permit complete isolation of SSE from ANE in the longitudinal configuration. However, further thickness dependence studies and careful analysis of the results revealed, ANE contribution of the isolated FM alloy is twofold, surface and bulk. Both surface and bulk contributions, whose magnitudes are comparable to that of the SSE, can be modified by the neighboring layer. Hence surface contribution to the ANE in FM metals is an important effect that needs to be considered.
RESUMO
ABSTARCT: Graphene has sparked extensive research interest for its excellent physical properties and its unique potential for application in absorption of electromagnetic waves. However, the processing of stable large-scale graphene and magnetic particles on a micrometer-thick conductive support is a formidable challenge for achieving high reflection loss and impedance matching between the absorber and free space. Herein, a novel and simple approach for the processing of a CNT film-Fe3O4-large scale graphene composite is studied. The Fe3O4 particles with size in the range of 20-200 nm are uniformly aligned along the axial direction of the CNTs. The composite exhibits exceptionally high wave absorption capacity even at a very low thickness. Minimum reflection loss of -44.7 dB and absorbing bandwidth of 4.7 GHz at -10 dB are achieved in composites with one-layer graphene in six-layer CNT film-Fe3O4 prepared from 0.04 M FeCl3. Microstructural and theoretical studies of the wave-absorbing mechanism reveal a unique Debye dipolar relaxation with an Eddy current effect in the absorbing bandwidth.
RESUMO
Ge-based alloys have drawn great interest as promising materials for their superior visible to infrared photoelectric performances. In this study, we report the preparation and optical properties of germanium-bismuth (Ge1-xBix) thin films by using molecular beam epitaxy (MBE). GeBi thin films belong to the n-type conductivity semiconductors, which have been rarely reported. With the increasing Bi-doping content from 2 to 22.2%, a series of Ge1-xBix thin film samples were obtained and characterized by X-ray diffraction, scanning electron microscopy, and atomic force microscopy. With the increase of Bi content, the mismatch of lattice constants increases, and the GeBi film shifts from direct energy band-gaps to indirect band-gaps. The moderate increase of Bi content reduces optical reflectance and promotes the transmittance of extinction coefficient in infrared wavelengths. The absorption and transmittance of GeBi films in THz band increase with the increase of Bi contents.
RESUMO
The design, fabrication and characterization of a novel metamaterial absorber based camera with subwavelength spatial resolution are investigated. The proposed camera is featured with simple and lightweight design, easy portability, low cost, high resolution and sensitivity, and minimal image interference or distortion to the original field distribution. The imaging capability of the proposed camera was characterized in both near field and far field ranges. The experimental and simulated near field images both reveal that the camera produces qualitatively accurate images with negligible distortion to the original field distribution. The far field demonstration was done by coupling the designed camera with a microwave convex lens. The far field results further demonstrate that the camera can capture quantitatively accurate electromagnetic wave distribution in the diffraction limit. The proposed camera can be used in application such as non-destructive image and beam direction tracer.