Supramolecular Sequential Light-Harvesting Systems for Constructing White LED Device and Latent Fingerprint Imaging.

The fabrication of supramolecular light-harvesting systems (LHS) with sequential energy transfer is of significance in utilizing light energy. In this study, we report the non-covalent self-assembly of a sequential LHS by pillar[5]arene-based host-guest interaction in water and its applications in white light-emitting diode (LED) device and latent fingerprint imaging. The host-guest complex WP5 ⊃ ${ \supset }$ G self-assembles into nanoparticles in water and shows enhanced aggregation-induced emission (AIE) effect. The nanoparticles can be further used to construct sequential LHS with fluorescent dyes 4,7-di(2-thienyl)-benzo[2,1,3]thiadiazole (DBT) and sulforhodamine 101 (SR101). Impressively, the system shows white-light emission when the molar ratio of WP5 ⊃ ${ \supset }$ G/DBT/SR101 is 1100/2/16. The material can be coated on a LED bulb to achieve white-light emission. In addition, the sequential LHS exhibit multicolor fluorescence including red emission, which have been successfully applied to high-resolution imaging of latent fingerprints. Therefore, we demonstrated a general strategy for the construction of sequential LHS in water based on macrocyclic host-guest interaction and explored its multi-functional applications in white-light LED device and imaging of latent fingerprints, which will promote future development and application of supramolecular LHSs.

Fluorescent Nanoassemblies in Water Exhibiting Tunable LCST Behavior and Responsive Light Harvesting Ability.

Responsive fluorescent nanomaterials have been received considerable attention in recent years. In this work, a bola-type amphiphilic molecule, CSO, was synthesized which contains a hydrophobic cyanostilbene core and hydrophilic oligo(ethylene glycol) (OEG) coils at both sides. The cyanostilbene group is aggregation-induced emission (AIE) active, while the OEG coils are thermo-responsive. As a result, the CSO molecules can self-assemble into blue-fluorescent nanoassemblies with lower critical solution temperature (LCST) behavior in aqueous media. It is noteworthy that the LCST behavior can be reversibly regulated with changes in concentration and the introduction of K+ . Intriguingly, fluorescence of CSO assembly shows a blue-shift upon heating. Finally, by employing CSO as a light capturing antenna and energy donor, an artificial light harvesting system with tunable emission and thermo-responsive characteristics was fabricated. This study not only demonstrates an integrated approach to create responsive fluorescent nanomaterials, but also shows great potential for producing luminescent materials and mimicking photosynthesis in nature.

Non-Covalent Dimer as Donor Chromophore for Constructing Artificial Light-Harvesting System in Water.

Dynamic emissive materials in aqueous media have received much attention owing to their ease of preparation, tunable luminescence and environmental friendliness. However, hydrophobic fluorophores usually suffer from aggregation-caused quenching in water. In this work, we constructed an artificial light-harvesting system by using a non-covalent aggregation-induced emission dimer as antenna and energy donor. The dimer is quadruple hydrogen bonded from a ureidopyrimidinone derivative (M) containing a tetraphenylethylene group. The dispersed nano-assemblies based on the dimer in aqueous media were fabricated with the help of surfactant. By loading a hydrophobic acceptor molecule DBT into the nano-assemblies, man-made light-harvesting nanoparticles were fabricated, showing considerable energy transfer efficiency and a relatively high antenna effect. Additionally, the fluorescence color of the system can be gradually tuned by varying the content of the acceptors. This study provides a general way for the construction of an aqueous light-harvesting system based on a supramolecular dimer, which is important for potential application in luminescent materials.

Supramolecular vesicles based on pillar[n]arenes: design, construction, and applications.

Supramolecular vesicles have attracted considerable attention due to their advantages of facile construction, high-cargo-loading capacity, and good biocompatibility. Pillar[n]arenes are a unique family of supramolecular macrocycles, exhibiting excellent features and broad applications due to their intrinsic topology and high functionality. In the past decade, the construction of pillar[n]arene-based supramolecular vesicles has been continuously attempted and developed rapidly. In this review, we mainly summarize the significant advancements of such supramolecular vesicles in the last three years. By showing some representative examples, the design strategies, construction methods, and potential applications of these dynamic nanocarriers are discussed in detail. In particular, the responsiveness of such vesicles to various external stimuli and their applications in drug delivery are highlighted. The outstanding performance of pillar[n]arene-based supramolecular vesicles would definitely enrich the family of supramolecular vesicles and promote the development of dynamic supramolecular materials.

Asymmetric Michael addition reactions catalyzed by calix[4]thiourea cyclohexanediamine derivatives.

A number of upper rim-functionalized calix[4]thiourea cyclohexanediamine derivatives have been designed, synthesized and used as catalysts for enantioselective Michael addition reactions between nitroolefins and acetylacetone. The optimal catalyst 2 with a mono-thiourea group exhibited good performance in the presence of water/toluene (v/v = 1:2). Under the optimal reaction conditions, high yields of up to 99% and moderate to good enantioselectivities up to 94% ee were achieved. Detailed experiments clearly showed that the upper rim-functionalized hydrophobic calixarene scaffold played an important role in cooperation with the catalytic center to the good reactivities and enantioselectivities.

Dynamic supramolecular complexes constructed by orthogonal self-assembly.

CONSPECTUS: Supramolecular complexes, including various low-molecular-mass structures and large molecular aggregates that are assembled by reversible and highly directional noncovalent interactions, have attracted more and more attention due to their fascinating and unconventional chemical and physical properties that are different from those of traditional architectures encountered by covalently linked backbones. Supramolecular complexes are by nature dynamic architectures considering the reversibility of noncovalent interactions by which small molecular monomers can assemble into specific architectures that are able to be repeatably reorganized through the assembly/disassembly processes under certain environmental factors such as temperature, concentration, and solvent conditions. The construction of supramolecular complexes by orthogonal self-assembly with different types of highly specific, noninterfering interactions is currently attracting considerable interest since they not only can dynamically self-assemble, but also can be tuned by various external stimuli through addressing each type of noncovalent interaction separately. Therefore, these dynamic supramolecular complexes, especially with external responsiveness, represent the most outstanding candidates for the future development of functional and smart materials, and even mimic the assembling process of natural systems. In this Account, we will summarize the recent advances of dynamic supramolecular complexes constructed by orthogonal self-assembly in soluiton in two sections: (1) Construction strategies for supramolecular complexes based on orthogonal self-assembly, whose dynamic behaviors with external responsiveness were not experimentally investigated but potentially existed due to the intrinsic reversibility of noncovalent bonds; (2) dynamic behaviors of multiresponsive supramolecular complexes, which were experimentally reported to exhibit reversible multi-responsiveness to external stimuli. Dynamic nature is one of intrinsic properties of supramolecular complexes constructed by self-assembly. Therefore, in the first section, we will describe the dynamic self-assembly in the construction of supramolecular complexes, but will focus on their external responsive dynamic behaviors in the second section. In addition, considering that an increasing number of supramolecular complexes constructed by biological building blocks through bio-orthogonal assembly as mimics of biological systems have been reported in recent years, in the second section we will also present some typical examples on such special dynamic biological supramolecular complexes. The final part of this Account is devoted to foreseeing the rapid development of dynamic supramolecular complexes toward applications in functional and smart materials and fundamental questions facing dynamic supramolecular complexes in the future.

Supramolecular light-harvesting systems utilizing tetraphenylethylene chromophores as antennas.

Efficient utilization of light energy is crucial for various technological applications ranging from solar energy conversion to optoelectronic devices. Supramolecular light-harvesting systems (LHS) have emerged as promising platforms for enhancing light absorption and energy transfer process. In this Feature Article, we highlight the utilization of tetraphenylethylene (TPE) chromophores as antennas in supramolecular assemblies for light harvesting applications. TPE, as an archetypal aggregation-induced emission (AIE) chromophore, offers unique advantages such as high photostability and efficient light-harvesting capabilities upon self-assembly. We discuss the design principles and synthetic strategies employed to construct supramolecular assemblies incorporating TPE chromophores, elucidating their roles as efficient light-harvesting antennas. Furthermore, we delve into the mechanisms governing energy transfer processes within these assemblies, such as Förster resonance energy transfer (FRET). The potential applications of these TPE-based supramolecular systems in various fields, including photocatalysis, reactive oxygen species generation, optoelectronic devices and sensing, are explored. Finally, we provide insights into future directions and challenges in the development of next-generation supramolecular LHSs utilizing TPE chromophores.

Multi-step FRET systems based on discrete supramolecular assemblies.

Fluorescence resonance energy transfer (FRET) from the excited state of the donor to the ground state of the acceptor is one of the most important fluorescence mechanisms and has wide applications in light-harvesting systems, light-mediated therapy, bioimaging, optoelectronic devices, and information security fields. The phenomenon of sequential energy transfer in natural photosynthetic systems provides great inspiration for scientists to make full use of light energy. In recent years, discrete supramolecular assemblies (DSAs) have been successively constructed to incorporate donor and multiple acceptors, and to achieve multi-step FRET between them. This perspective describes recent advances in the fabrication and application of DSAs with multi-step FRET. These DSAs are categorized based on the non-covalent scaffolds, such as amphiphilic nanoparticles, host-guest assemblies, metal-coordination scaffolds, and biomolecular scaffolds. This perspective will also outline opportunities and future challenges in this research area.

A sequential light-harvesting system with thermosensitive colorimetric emission in both aqueous solution and hydrogel.

Inspired by natural photosynthetic systems that feature both sequential energy transfer and temperature response, we herein report an artificial thermosensitive sequential light-harvesting system (LHS) based on an amphiphilic molecule TPEO. It self-assembles into fluorescent nanoparticles in water and shows tunable LCST behavior. By loading ESY as the first acceptor and NiR as the second acceptor into the nanoparticles, an artificial LHS with two-step FRET was successfully constructed. Interestingly, the system exhibits thermosensitive colorimetric fluorescence in both aqueous solution and hydrogel by taking advantage of a combination of LCST and sequential FRET.

pH-responsive supramolecular vesicles based on water-soluble pillar[6]arene and ferrocene derivative for drug delivery.

The drug delivery system based on supramolecular vesicles that were self-assembled by a novel host-guest inclusion complex between a water-soluble pillar[6]arene (WP6) and hydrophobic ferrocene derivative in water has been developed. The inclusion complexation between WP6 and ferrocene derivative in water was studied by (1)H NMR, UV-vis, and fluorescence spectroscopy, which showed a high binding constant of (1.27 ± 0.42) × 10(5) M(-1) with 1:1 binding stoichiometry. This resulting inclusion complex could self-assemble into supramolecular vesicles that displayed a significant pH-responsive behavior in aqueous solution, which were investigated by fluorescent probe technique, dynamic laser scattering, and transmission electron microscopy. Furthermore, the drug loading and in vitro drug release studies demonstrated that these supramolecular vesicles were able to encapsulate mitoxantrone (MTZ) to achieve MTZ-loaded vesicles, which particularly showed rapid MTZ release at low-pH environment. More importantly, the cellular uptake of these pH-responsive MTZ-loaded vesicles by cancer cells was observed by living cell imaging techniques, and their cytotoxicity assay indicated that unloaded vesicles had low toxicity to normal cells, which could dramatically reduce the toxicity of MTZ upon loading of MTZ. Meanwhile, MTZ-loaded vesicles exhibited comparable anticancer activity in vitro as free MTZ to cancer cells under examined conditions. This study suggests that such supramolecular vesicles have great potential as controlled drug delivery systems.

Advanced supramolecular polymers constructed by orthogonal self-assembly.

Large aggregates, constructed by linking together monomer building blocks via non-covalent interactions with polymer properties, are regarded as supramolecular polymers. Many kinds of non-covalent interactions, such as metal-ligand coordination, hydrogen bonding, π-π stacking, ionic interaction, and host-guest interaction etc., can be involved in the binding interactions of monomer building blocks, as well as in the modification of the side chain for the construction of variable supramolecular polymers. In this tutorial review, we summarized the reported supramolecular polymers fully- or partially-created from the combination of multiple non-covalent binding interactions, mainly of two kinds, in the orthogonal way.

Host-Guest Complexes of Pillar[5]arene as Components for Supramolecular Light-Harvesting Systems with Tunable Fluorescence.

A guest molecule containing a short alkyl spacer between the tetraphenylethylene group and the methylpyridinium group was designed and synthesized. After complexation with a water-soluble pillar[5]arene, the resulting host-guest complex can further self-assemble into fluorescence-emitting nanoparticles in water. By loading a commercially available dye Rhodamine 6G into the nanoparticles, an efficient artificial light-harvesting system with high donor/acceptor ratios (>400/1) was successfully constructed. The obtained systems show considerable antenna effects with values of more than 10 times. The system also exhibits tunable fluorescence emission behavior and can be used as a fluorescent ink for information encryption.

Photoactive oligomer with D-D'-A-D'-D''-D'-A-D'-D scaffold for high-efficiency NIR-II phototheranostics.

A D-D'-A-D'-D''-D'-A-D'-D type photoactive oligomer (O-BT) based nanoparticles (NPs) were prepared for biomedical application. The O-BT NPs possessed a high extinction coefficient, excellent hyperthermia generation ability, satisfactory NIR-II fluorescence emission, and good batch-to-batch reproducibility, and could be used as high-efficiency phototheranostics for photothermal therapy and NIR-II fluorescence imaging.

High-Performance Hybrid Phototheranostics for NIR-IIb Fluorescence Imaging and NIR-II-Excitable Photothermal Therapy.

Photothermal therapy operated in the second near-infrared (NIR-II, 1000-1700 nm) window and fluorescence imaging in the NIR-IIb (1500-1700 nm) region have become the most promising techniques in phototheranostics. Their combination enables simultaneous high-resolution optical imaging and deep-penetrating phototherapy, which is essential for high-performance phototheranostics. Herein, carboxyl-functionalized small organic photothermal molecules (Se-TC) and multi-layered NIR-IIb emissive rare-earth-doped nanoparticles (NaYF4:Yb,Er,Ce@NaYF4:Yb,Nd@NaYF4, RENP) were rationally designed and successfully synthesized. Then, high-performance hybrid phototheranostic nanoagents (Se-TC@RENP@F) were easily constructed through the coordination between Se-TC and RENP and followed by subsequent F127 encapsulation. The carboxyl groups of Se-TC can offer strong binding affinity towards rare-earth-doped nanoparticles, which help improving the stability of Se-TC@RENP@F. The multilayered structure of RENP largely enhance the NIR-IIb emission under 808 nm excitation. The obtained Se-TC@RENP@F exhibited high 1064 nm absorption (extinction coefficient: 24.7 L g-1 cm-1), large photothermal conversion efficiency (PCE, 36.9%), good NIR-IIb emission (peak: 1545 nm), as well as great photostability. Upon 1064 nm laser irradiation, high hyperthermia can be achieved to kill tumor cells efficiently. In addition, based on the excellent NIR-IIb emission of Se-TC@RENP@F, in vivo angiography and tumor detection can be realized. This work provides a distinguished paradigm for NIR-IIb-imaging-guided NIR-II photothermal therapy and establishes an artful strategy for high-performance phototheranostics.

A diketopyrrolopyrrole-based small molecule with an extended conjugated skeleton and J-aggregation behavior for 808 nm laser triggered phototheranostics.

The development of phototheranostic agents, specifically those based on organic small molecules (OSMs) with long wavelength excitation/emission, is an attractive but challenging project. In this contribution, we designed and synthesized a novel conjugate small molecule with a linear structure, named DPP-OPIC. Water-soluble nanoparticle DPP-OPIC NPs were fabricated. They exhibited strong absorption in the region of 600-1000 nm, which was due to the extended conjugate length of the molecular skeleton and J-aggregation behavior. Under 808 nm laser excitation, DPP-OPIC NPs were capable of producing outstanding near-infrared-II (NIR-II, 900-1700 nm) fluorescence. The photoluminescence quantum yield was determined as 0.58%, which enabled high-resolution in vivo tumor imaging. Additionally, a notable photothermal effect with a high photothermal conversion efficiency (41.5%) was achieved by the irradiation of DPP-OPIC NPs. Hence, DPP-OPIC NPs can be used as superior phototheranostic agents, providing valuable contributions to NIR-II fluorescence imaging and photothermal therapy.

Self-assembled Fluorescent Nanoparticles with Tunable LCST Behavior in Water.

The development of stimuli-responsive fluorescent materials in water based on organic molecule has drawn significant interest. Herein, we designed and synthesized an amphiphilic molecule M containing a fixed tetraphenylethylene moiety (FTPE) as hydrophobic part and tri(ethylene glycol) (TEG) chains as hydrophilic part. Notably, the FTPE moiety is aggregation-induced emission (AIE) active, while the TEG chains are thermo-responsive. M can self-assemble into fluorescent nanoparticles (NPs) in water, which showed lower critical solution temperature (LCST) behavior. Moreover, its clouding point can be reversibly tuned upon the concentration variation. Interestingly, the NPs can be acted as a fluorescence thermometer in aqueous media owing to their unique AIE and LCST behaviors. Our work herein not only provides an integration strategy to construct stimuli-responsive fluorescent materials but also shows great potential in biological applications including bioimaging and biosensors.

An ultralow-acceptor-content supramolecular light-harvesting system for white-light emission.

White-light emission in donor-acceptor systems usually requires relatively high acceptor content and/or multiple acceptors to "neutralize" the primary color of donors. Herein, a cyanostilbene-bridged ditopic ureidopyrimidinone donor (CSU) was designed and synthesized, which can self-assemble into dispersed nanoparticles in water. Fascinatingly, efficient white-light emission can be realized by co-assembling 0.1% DBT into the nanoparticles through a light-harvesting strategy. This new system is further demonstrated for use in white-light encryption materials.

New light on the ring-chain equilibrium of a hydrogen-bonded supramolecular polymer based on a photochromic dithienylethene unit and its energy-transfer properties as a storage material.

A novel, bifunctional, quadruple hydrogen-bonding ureido-pyrimidinone (UPy) unit bridged by photochromic dithienylethene (1) has been synthesized, which affords linear assemblies in solution and undergoes concentration-dependent ring-opening polymerization. The two UPy functional groups of 1 can dimerize intramolecularly to form a cyclic monomer with the two thienyl rings fixed in a parallel conformation, which prohibits its photocyclization. We exploited the photochemical reactivity and resonance difference of the linker of the bis-UPy derivative as well as using the more typical (1)H NMR, DOSY, and Ubbelohde viscometry methods to investigate for the first time the ring-chain polymerization mechanism. Moreover, we fabricated a mixed polymer film with a fluorescent dye noncovalently endcapping the linear photochromic assemblies through quadruple hydrogen bonds, which showed nondestructive fluorescent read-out ability for data storage by fluorescence resonance energy transfer (FRET) from the fluorescent dye to the closed form of the diarylethene.

Efficient artificial light-harvesting system constructed from supramolecular polymers with AIE property.

Supramolecular luminescent materials in water have attracted much interest due to their excellent tunability, multi-color emission, and environment-friendly behavior. However, hydrophobic chromophores are often affected by poor solubility and aggregation-caused quenching effects in aqueous media. Herein, we report a water-phase artificial light-harvesting system based on an AIE-type supramolecular polymer. Specifically, dispersed nanoparticles in water were prepared from an AIE chromophore-bridged ditopic ureidopyrimidinone (M) based supramolecular polymer with the assistance of surfactants. By co-assembling the hydrophobic chromophores NDI as energy acceptor into the nanocarriers, artificial light-harvesting systems (M-NDI) could be successfully constructed, exhibiting efficient energy transfer and high antenna effects. Furthermore, the spectral emission of the system could be continuously tuned with a relatively small number of acceptors. This work develops an efficient supramolecular light-harvesting system in water, which has potential applications in dynamic luminescent materials.

Supramolecular polymer-directed light-harvesting system based on a stepwise energy transfer cascade.

The design and construction of an artificial light-harvesting system in water by mimicking the energy transfer cascade in natural photosynthesis are of significant importance. Herein, we report an efficient two-step sequential energy transfer system based on quadruple hydrogen-bonded supramolecular polymeric nanoparticles. By loading two types of hydrophobic dyes as energy acceptors, excitation energy from the supramolecular polymer could be funneled efficiently to the final acceptor through the relay acceptor. The system exhibits tunable multicolor emission from blue through yellow to red, as well as white light emission.