Visualization and Object Detection Based on Event Information.

A dynamic vision sensor is an optical sensor that focuses on dynamic changes and outputs event information containing only position, time, and polarity. It has the advantages of high temporal resolution, high dynamic range, low data volume, and low power consumption. However, a single event can only indicate that the increase or decrease in light exceeds the threshold at a certain pixel position and a certain moment. In order to further study the ability and characteristics of event information to represent targets, this paper proposes an event information visualization method with adaptive temporal resolution. Compared with methods with constant time intervals and a constant number of events, it can better convert event information into pseudo-frame images. Additionally, in order to explore whether the pseudo-frame image can efficiently complete the task of target detection according to its characteristics, this paper designs a target detection network named YOLOE. Compared with other algorithms, it has a more balanced detection effect. By constructing a dataset and conducting experimental verification, the detection accuracy of the image obtained by the event information visualization method with adaptive temporal resolution was 5.11% and 4.74% higher than that obtained using methods with a constant time interval and number of events, respectively. The average detection accuracy of pseudo-frame images in the YOLOE network designed in this paper is 85.11%, and the number of detection frames per second is 109. Therefore, the effectiveness of the proposed visualization method and the good performance of the designed detection network are verified.

Selective Recovery of Palladium (II) from Metallurgical Wastewater Using Thiadiazole-Based Chloromethyl Polystyrene-Modified Adsorbent.

Selective adsorption of palladium from metallurgical wastewater containing Pt (IV), Rh (III), Ca2+, Cu2+, Fe3+, Ni2+, Pb2+, V3+, and Ti4+ has tremendous economic and environmental benefits. In this paper, a novel thiadiazole-based chloromethyl polystyrene-modified adsorbent, viz. 2, 5-bis-polystyrene-1,3,4-thiadiazole (PS-DMTD), was synthesized using chloromethyl polystyrene as the backbone. The experimental results show that PS-DMTD can selectively separate Pd (II) from metallurgical wastewater in a one-step adsorption process. The calculated saturation adsorption capacity of PS-DMTD for Pd (II) was 176.3 mg/g at 25 °C. The separation factors of ßPd (II)/Mn+ (Mn+: Pt (IV), Rh (III), Ca2+, Cu2+, Fe3+, Ni2+, Pb2+, V3+, and Ti4+) were all higher than 1 × 104. FT-IR, XPS, and single-crystal X-ray diffraction showed that the adsorption of Pd (II) to PS-DMTD was primarily through a coordination mechanism. Density functional theory (DFT) calculations revealed that the other base metal ions could not coordinate with the PS-DMTD. Pt (IV) could not be adsorbed to PS-DMTD due to its strong chlorophilicity. Furthermore, Rh (III) existed as a polyhydrate, which inhibited Rh (III) diffusion toward the positively charged absorption sites on the PS-DMTD. These results highlight that PS-DMTD has broad application prospects in the recovery of Pd (II) from metallurgical wastewater.

Nitrogen-doped carbon dots with high quantum yield for colorimetric and fluorometric detection of ferric ions and in a fluorescent ink.

Nitrogen-doped carbon dots (N-CDs) with a quantum yield of 41 ± 3% and excellent stability were prepared and are shown to be viable probes for the determination of ferric ions, which is a strong quencher of fluorescence. The absorption peak of the N-CDs is located at 325 nm. The optimal excitation and emission wavelengths of the N-CDs are 340 nm and 430 nm, respectively. The fluorometric response to Fe(III) is linear in the ranges between 1.0 and 21.0 µM and between 0.05 and 30.0 µM, and the limits of detection are 0.28 µM in case of colorimetry and 13.5 nM in case of fluorometry. Quenching by Fe(III) is mainly attributed to a combination of chelation (static quenching) and inner filter effect. The N-CDs also can be used as a new sort of fluorescent ink owing to the strong luminous performance and chemical inertness. Graphic abstract The illustration for synthesis of the N-CDs and its applications for colorimetric and fluorescent detection of Fe3+ and fluorescent ink.

Correction: Xie, H.; et al. 3D QSAR studies, pharmacophore modeling and virtual screening on a series of steroidal aromatase inhibitors. Int. J. Mol. Sci. 2014, 15, 20927-20947.

A number of sentences in the first paragraph of the introduction of [28] were copied verbatim from [21,22,25,29]. Although [21,22,25] were cited in the text, [29] was omitted and it was not made sufficiently clear that direct quotations were used. The authors wish to apologize to the authors of [21,22,25,29] and to the readers of the journal for any inconvenience.

An Investigation of Molecular Docking and Molecular Dynamic Simulation on Imidazopyridines as B-Raf Kinase Inhibitors.

In the recent cancer treatment, B-Raf kinase is one of key targets. Nowadays, a group of imidazopyridines as B-Raf kinase inhibitors have been reported. In order to investigate the interaction between this group of inhibitors and B-Raf kinase, molecular docking, molecular dynamic (MD) simulation and binding free energy (ΔGbind) calculation were performed in this work. Molecular docking was carried out to identify the key residues in the binding site, and MD simulations were performed to determine the detail binding mode. The results obtained from MD simulation reveal that the binding site is stable during the MD simulations, and some hydrogen bonds (H-bonds) in MD simulations are different from H-bonds in the docking mode. Based on the obtained MD trajectories, ΔGbind was computed by using Molecular Mechanics Generalized Born Surface Area (MM-GBSA), and the obtained energies are consistent with the activities. An energetic analysis reveals that both electrostatic and van der Waals contributions are important to ΔGbind, and the unfavorable polar solvation contribution results in the instability of the inhibitor with the lowest activity. These results are expected to understand the binding between B-Raf and imidazopyridines and provide some useful information to design potential B-Raf inhibitors.

A Combined Pharmacophore Modeling, 3D QSAR and Virtual Screening Studies on Imidazopyridines as B-Raf Inhibitors.

B-Raf kinase is an important target in treatment of cancers. In order to design and find potent B-Raf inhibitors (BRIs), 3D pharmacophore models were created using the Genetic Algorithm with Linear Assignment of Hypermolecular Alignment of Database (GALAHAD). The best pharmacophore model obtained which was used in effective alignment of the data set contains two acceptor atoms, three donor atoms and three hydrophobes. In succession, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were performed on 39 imidazopyridine BRIs to build three dimensional quantitative structure-activity relationship (3D QSAR) models based on both pharmacophore and docking alignments. The CoMSIA model based on the pharmacophore alignment shows the best result (q(2) = 0.621, r(2)(pred) = 0.885). This 3D QSAR approach provides significant insights that are useful for designing potent BRIs. In addition, the obtained best pharmacophore model was used for virtual screening against the NCI2000 database. The hit compounds were further filtered with molecular docking, and their biological activities were predicted using the CoMSIA model, and three potential BRIs with new skeletons were obtained.

3D QSAR studies, pharmacophore modeling and virtual screening on a series of steroidal aromatase inhibitors.

Aromatase inhibitors are the most important targets in treatment of estrogen-dependent cancers. In order to search for potent steroidal aromatase inhibitors (SAIs) with lower side effects and overcome cellular resistance, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were performed on a series of SAIs to build 3D QSAR models. The reliable and predictive CoMFA and CoMSIA models were obtained with statistical results (CoMFA: q² = 0.636, r²(ncv) = 0.988, r²(pred) = 0.658; CoMSIA: q² = 0.843, r²(ncv) = 0.989, r²(pred) = 0.601). This 3D QSAR approach provides significant insights that can be used to develop novel and potent SAIs. In addition, Genetic algorithm with linear assignment of hypermolecular alignment of database (GALAHAD) was used to derive 3D pharmacophore models. The selected pharmacophore model contains two acceptor atoms and four hydrophobic centers, which was used as a 3D query for virtual screening against NCI2000 database. Six hit compounds were obtained and their biological activities were further predicted by the CoMFA and CoMSIA models, which are expected to design potent and novel SAIs.

Association between sleep duration and subjective memory complaints: A large-scale cross-sectional study based on NHANES.

Objective: When chatting, people often forget what they want to say, that is, they suffer from subjective memory complaints (SMCs). This research examines the Association between sleep duration and self-reported SMC in a sample representing the entire United States. Methods: We examined data from 5567 individuals (aged 20-80) who participated in the National Health and Nutrition Examination Survey (2015-2018) to evaluate the association between sleep duration and SMC. Odds ratios (ORs) and a restricted cubic spline (RCS) curve were calculated with multiple logistic regression, and subgroup analysis was performed. Results: Approximately 5.8 % (3 2 3) reported SMC, and most are older people (1 6 3). RCS analysis treating sleep duration as a continuous variable revealed a J-shaped curve association between sleep duration and SMC. Self-reported sleep duration was significantly linked to a 33 % elevated risk of SMC (OR, 1.33; 95 % confidence interval [CI], 1.23-1.43; P < 0.001). In the group analysis, individuals who slept more than 8 h per day had a greater association of experiencing SMC than those who slept for 6-8 h/day (OR, 1.75; 95 % CI, 1.36-2.23; P < 0.001). In the analysis of age groups, the stable association between sleep duration and SMC was observed only in the 60-80 age bracket (OR, 1.59; 95 % CI, 1.09-2.33; P < 0.001). Conclusions: We found that people with self-report sleep duration exceeding 8 h are more likely to experience SMC, especially older adults. Improving sleep health may be an effective strategy for preventing SMC and cognitive impairment.

Removal of metal-cyanide complexes and recovery of Pt(II) and Pd(II) from wastewater using an alkali-tolerant metal-organic resin.

Metal-cyanide complexes are hazardous and toxic pollutants that can accumulate in organisms, and their natural degradation is difficult. These complexes are primarily present in alkaline wastewater effluents, and an effective technique for their removal must be developed. Herein, we have successfully synthesized a novel quaternary ammonium-functionalized Zr4+ metal-organic resin (MOR) (H16[Zr6O16(MPATP)4]Cl8·xH2O, MPATP = 2-((1-methylpyridin-1-ium-2-ylmethyl)amino)-terephthalic acid), which we refer to as MOR-2-QAS. With alkali resistance, high surface area, and high anion exchange capacity, it acts by introducing positively charged pyridine into the organic ligand. The experimental results indicate that MOR-2-QAS becomes rapidly attached and efficiently removes Pt(CN)42-, Pd(CN)42-, Co(CN)63-, and Fe(CN)63-. Valuable metals (Pt(II) and Pd(II)) can be effectively recovered from the simulated wastewater containing four-component cyanide complexes via the two-step elution process. The recovery efficiency of Pt(II) and Pd(II) was higher than 90.0% after three adsorption-desorption cycles. The adsorption mechanism, which proceeded via ionic association (ion-exchange) and complied with the minimum surface charge density experiential principle, was confirmed using density functional theory. This study provides ideas for developing efficient and stable MORs to enable the simultaneous removal of multiple metal-cyanide complexes and recovery of valuable metals.

Rapid synthesis of cesium lead halide perovskite nanocrystals by l-lysine assisted solid-phase reaction at room temperature.

Nowadays, there are many ways to obtain cesium lead halide perovskite nanocrystals. In addition to the synthesis methods carried out in solution, the solid-phase synthesis was reported involving grinding and milling. In this paper, we synthesized luminescent CsPbBr3/Cs4PbBr6 perovskite nanocrystals (PNCs) by three solid-phase synthesis methods (grinding, knocking, stirring) using l-lysine as a ligand. This is the first attempt to use an amino acid for assisting the solid phase synthesis of perovskite and to study the difference in the products obtained by the three solid phase synthesis methods. The results show that the productivity of the solid-phase synthesis methods can be greatly improved by adding l-lysine and the perovskites obtained by the methods are more resistant to water due to the addition of l-lysine. The simplicity of the synthesis process expanded the use of solid-phase synthesis to obtain more perovskites and provided potential applications of perovskite in analytical detection and sensing in aqueous solution.

Sustainable Green Pavement Using Bio-Based Polyurethane Binder in Tunnel.

As a closed space, the functional requirements of the tunnel pavement are very different from ordinary pavements. In recent years, with the increase of requirements for tunnel pavement safety, comfort and environmental friendliness, asphalt pavement has become more and more widely used in long tunnels, due to its low noise, low dust, easy maintenance, and good comfort. However, conventional tunnel asphalt pavements cause significant safety and environmental concerns. The innovative polyurethane thin overlay (PTO) has been developed for the maintenance of existing roads and constructing new roads. Based on the previous study, the concept of PTO may be a feasible and effective way to enrich the innovative functions of tunnel pavement. In this paper, the research aims to evaluate the functional properties of PTO, such as noise reduction, solar reflection and especially combustion properties. Conventional asphalt (Open-graded Friction Course (OGFC) and Stone Mastic Asphalt (SMA)) and concrete pavement materials were used as control materials. Compared with conventional tunnel pavement materials, significant improvements were observed in functional properties and environmental performance. Therefore, this innovative wearing layer can potentially provide pavements with new eco-friendly functions. This study provides a comprehensive analysis of these environmentally friendly materials, paving the way for the possible application in tunnels, as well as some other fields, such as race tracks in stadiums.

Water-soluble pillar[6]arene functionalized PdPt porous core-shell octahedral nanodendrites to construct highly sensitive and robust neuron-specific enolase immunosensor by host-guest chemistry assisted catalytic amplification.

In this work, water-soluble pillar[6]arene functionalized PdPt porous core-shell octahedral nanodendrites (WP6@PdPt PCONs) were simply synthesized and used for the fabrication of NSE immunosensor. The newest generation of macrocyclic host and biomimetic nano-enzymes have been effectively integrated to achieve the robust immobilization of signal molecules by host-guest molecular recognition and sensitively catalytic amplification of electrochemical signals. The addition of Pd and the formation of WP6@PdPt PCONs unique bimetallic nanostructure are beneficial to changing Pt-based catalyst electronic structure, accelerating the electron transport, promoting the generation of synergistic catalysis effect. Compared with enzyme-based methods, the fabricated sandwich-type immunosensor demonstrates more advantages in robustness owing to the introduction of host-guest chemistry and biomimetic nano-enzymes. In the wide range from 0.0003 to 100.00 ng mL-1, a good linear relationship (R2 = 0.998) and a low LOD (0.095 pg mL-1, S/N = 3) can be obtained. The proposed immunosensor shows remarkable analytical performances in the measurements of selectivity, stability, reproducibility, and real sample analysis, which provided a promising approach for clinical detection of NSE in human serum. Besides, the successful synthesis of WP6@PdPt PCONs provides a new idea for the preparation of biosensors based on bionic materials, nanotechnology and host-guest molecule recognition.

A robust electrochemical immunosensor based on hydroxyl pillar[5]arene@AuNPs@g-C3N4 hybrid nanomaterial for ultrasensitive detection of prostate specific antigen.

Prostate specific antigen (PSA) is the most significant biomarker for the screening of prostate cancer in human serum. However, most methods for the detection of PSA often require major laboratories, precisely analytical instruments and complicated operations. Currently, the design and development of satisfying electrochemical biosensors based on biomimetic materials (e.g. synthetic receptors) and nanotechnology is highly desired. Thus, we focused on the combination of molecular recognition and versatile nanomaterials in electrochemical devices for advancing their analytical performance and robustness. Herein, by using the present prepared multifunctional hydroxyl pillar[5]arene@gold nanoparticles@graphitic carbon nitride (HP5@AuNPs@g-C3N4) hybrid nanomaterial as robust biomimetic element, a high-performance electrochemical immunosensor for detection of PSA was constructed. The as-prepared immunosensor, with typically competitive advantages of low cost, simple preparation and fast detection, exhibited remarkable robustness, ultra-sensitivity, excellent selectivity and reproducibility. The limit of detection (LOD) and linear range were 0.12 pg mL-1 (S/N = 3) and 0.0005-10.00 ng mL-1, respectively. The satisfying results provide a promising approach for clinical detection of PSA in human serum.

Mechanism of Base-Catalyzed Resorcinol-Formaldehyde and Phenol-Resorcinol-Formaldehyde Condensation Reactions: A Theoretical Study.

The base-catalyzed resorcinol-formaldehyde condensation reactions were theoretically investigated in this study by employing a quantum chemistry method. The condensation reaction includes two steps: (1) formation of the quinonemethide (QM) intermediate from hydroxymethylresorcinol; (2) Michael addition between the quinonemethide and resorcinol anion. The first step is the rate-determining step. Two mechanisms, unimolecular elimination of the conjugate base (E1cb) and water-aided elimination (WAE), were identified for the formation of QM. The hydroxymethylresorcinol anion produces neutral QM while the dianion produces a quinonemethide anion (QMA). The calculated potential energy barriers suggested that the QMA formation is much more favorable. Although resorcinol-formaldehyde and phenol-formaldehyde condensations share a common mechanism, the former would be faster if the QMA participates in condensations. The potential energy barriers for formation of 2-QM, 4-QM, 6-QM, 2-QMA, and 4-QMA were calculated. The results show that the formations of 6-QM and 4-QMA have relatively lower energy barriers. This rationalized previous experimental observations that the 2,4-(2,6-) and 6,6'-(4,4'-) methylene linkages were dominant, whereas the 2,2'-linkage was almost absent. The resorcinol-phenol-formaldehyde co-condensations were also calculated. The cold-setting characteristic of phenol-resorcinol-formaldehyde co-condensed resin can be attributed to participation of resorcinol quinonemethides in condensations.

Theoretical Confirmation of the Quinone Methide Hypothesis for the Condensation Reactions in Phenol-Formaldehyde Resin Synthesis.

The mechanisms for the base-catalyzed condensation reactions in phenol-formaldehyde resin synthesis were investigated by using the density functional theory method. The structures of the intermediates and transition states, as well as the potential energy barriers of the involved reactions, were obtained. The hypothesis of quinine methide (QM) formation was theoretically confirmed. Two mechanisms were identified for QM formation, namely E1cb (elimination unimolecular conjugate base) and water-aided intra-molecular water elimination. The latter is energetically more favorable and is proposed for the first time in this work. Based on the QM mechanism, the condensation should be a unimolecular reaction because the following condensation between an ionized species (dissociated phenol or hydroxymethylphenol) with QM is much faster. The previously proposed SN2 condensation mechanism was found to be not competitive over the QM mechanism due to a much higher energy barrier. The condensation reaction between neutral phenol or hydroxymethylphenol and QM was also found to be possible. The energy barrier of this reaction is close to or higher than that of QM formation. Therefore, the overall condensation reaction may appear to be bimolecular if such a reaction is incorporated. The theoretical calculations in this work rationalized the discrepant results reported in previous kinetics studies well.

New Mechanism Proposed for the Base-Catalyzed Urea⁻Formaldehyde Condensation Reactions: A Theoretical Study.

Base-catalyzed urea⁻formaldehyde condensation reactions were investigated by using a quantum chemistry method. It was found that monomethylolurea or N,N'-dimethylolurea can produce the methyleneurea intermediate (⁻HN⁻CO⁻N=CH2) with the catalysis of base. The E1cb (unimolecular elimination of conjugate base) mechanism was identified for the formation of such an intermediate. The potential energy barrier was theoretically predicted to be 59.6 kJ/mol for the E1cb step, which is about half of that of previously proposed SN2 (bimolecular nucleophilic substitution) mechanism. In the subsequentcondensation reactions, Michael addition reactions that lead to different condensed structures can occur between the methyleneurea intermediate and the anions produced from methylolureas under alkaline conditions. Based on the theoretical calculations on the kinetics and thermodynamics of the selected reactions, the competitive formations of methylene linkages, ether linkages and uron were discussed in combination with our previous experimental observations.

Virtual screening of B-Raf kinase inhibitors: A combination of pharmacophore modelling, molecular docking, 3D-QSAR model and binding free energy calculation studies.

B-Raf kinase has been identified as an important target in recent cancer treatment. In order to discover structurally diverse and novel B-Raf inhibitors (BRIs), a virtual screening of BRIs against ZINC database was performed by using a combination of pharmacophore modelling, molecular docking, 3D-QSAR model and binding free energy (ΔGbind) calculation studies in this work. After the virtual screening, six promising hit compounds were obtained, which were then tested for inhibitory activities of A375 cell lines. In the result, five hit compounds show good biological activities (IC50<50µM). The present method of virtual screening can be applied to find structurally diverse inhibitors, and the obtained five structurally diverse compounds are expected to develop novel BRIs.

p-sulfonated calix[8]arene functionalized graphene as a "turn on" fluorescent sensing platform for aconitine determination.

This work reports a novel method for the determination of aconitine through the competitive host-guest interaction between p-sulfonated calix[8]arene (SCX8) and signal probe/target molecules by using SCX8 functionalized reduced graphene oxide (SCX8-RGO) as a receptor. Three dyes (ST, RhB, BRB) and aconitine were selected as the probe and target molecules, respectively. The formation of SCX8-RGO·ST, SCX8-RGO·RhB, and SCX8-RGO·BRB complexes greatly decreases the fluorescence emission of ST, RhB, and BRB. The aconitine/SCX8 complex possesses a higher binding constant than ST/SCX8, RhB/SCX8, and BRB/SCX8 complexes, thus the dye in the SCX8 cavity can be replaced by aconitine to revert the fluorescence emission of SCX8-RGO·dye, leading to a "switch-on" fluorescence response. The fluorescence intensity of SCX8-RGO·ST, SCX8-RGO·RhB, and SCX8-RGO·BRB complexes increased linearly with increasing concentration of aconitine ranging from 1.0 to 14.0µM, 2.0-16.0µM, and 1.0-16.0µM, respectively. Based on the competitive host-guest interaction, the proposed detection method for aconitine showed detection limits of 0.28µM, 0.60µM, and 0.37µM, respectively, and was successfully applied for the determination of aconitine in human serum samples with good recoveries from 95.1% to 104.8%. The proposed method showed high selectivity for aconitine beyond competitive binding analytes. In addition, the inclusion complex of the SCX8/aconitine was studied by the molecular docking and molecular dynamics simulation, which indicated that the phenyl ester group of the aconitine molecule was included into the SCX8 cavity.

Fluorescent Detection of Tadalafil Based on Competitive Host-Guest Interaction Using p-Sulfonated Calix[6]arene Functionalized Graphene.

A competitive fluorescence method toward tadalafil detection has been developed based on host-guest recognition by selecting rhodamine B (RhB) and p-sulfonated calix[6]arene functionalized graphene (CX6-Gra) as the "reporter pair". Upon the presence of tadalafil to the performed CX6-Gra-RhB complex, the RhB molecules are displaced by tadalafil, leading to a "switch-on" fluorescence signal. The observed fluorescence signal can be used for quantitative detection of tadalafil ranging from 1.00 to 50.00 µM with a detection limit of 0.32 µM (S/N = 3). The inclusion complex of tadalafil and CX6 was studied by molecular docking and the results indicated that a 1:1 host-guest stoichiometry had the lowest ΔG value of -7.18 kcal/mol. The docking studies demonstrated that the main forces including π-π interactions, electrostatic interactions, and hydrophobic interactions should be responsible for the formation of this inclusion compound. The mechanism of the competitive host-guest interaction was clarified. The binding constant (K) of the tadalafil/CX6 complex was more than 5 times greater than that of RhB/CX6.

Novel water-soluble fisetin/cyclodextrins inclusion complexes: Preparation, characterization, molecular docking and bioavailability.

Novel water-soluble inclusion complexes for fisetin (FIT) were developed by introducing ß-cyclodextrin (ß-CD) and γ-CD. Properties of the obtained complexes, as well as the interactions between each component, were systematically investigated in both solution and solid states by means of ESI-MS, NMR, FT-IR, XRD, DSC, SEM etc. All characterization information demonstrated that FIT/CDs inclusion complexes were formed, and exhibited different spectroscopic features and properties from FIT. A complex with 1:1 stoichiometry of FIT and CDs was confirmed with Job's method. Meanwhile, as supported by molecular modeling calculations, we suggested that phenyl group (C ring) of FIT molecule was included in the CDs cavity from the wide side. Moreover, the water solubility of FIT/CDs was successfully improved from 2.8 mg/mL (in ethanol aqueous solution) to 4.5 mg/mL (FIT/ß-CD complex) and 7.8 mg/mL (FIT/γ-CD complex), and higher thermal stability results were shown by thermal analysis for those complexes. Notably, the inclusion complexes displayed almost two times higher cytotoxicity compared to free FIT against Hela and MCF-7 cells. These results suggested that FIT/CDs complexes could be potentially useful in food industry and healthcare area.