Characterisation and critical processes identification for production of herbal preparations using 1H-NMR and chemometrics: A case study of Trichosanthis Pericarpium injection.

INTRODUCTION: Herbal preparations are extensively utilised for the treatment of diseases in Asian countries. However, the variations in origin, climate, and production processes can lead to inconsistencies in the quality of herbal preparations. Existing quality control methods only target a few components in the finished product but ignore the control in the pharmaceutical process. Therefore, this study intends to develop a comprehensive component analysis method for intermediates in the pharmaceutical process to reveal the change patterns of substances and deepen the process understanding. OBJECTIVE: This study aims to develop a rapid and comprehensive process characterisation and critical process identification method for herbal preparations. METHODS: Six batches of Trichosanthis Pericarpium injection (TPI) intermediates were collected from the production process. Proton nuclear magnetic resonance (1H-NMR) spectra were acquired for qualitative and quantitative analysis of the se intermediates. Subsequently, chemometrics were used to identify critical processes and potential chemical markers. RESULTS: A total of 39 components in intermediates were identified, and the transfer of 25 components during the production process was investigated. Column chromatography was determined as the critical process. Nine components were identified as chemical markers. CONCLUSION: The application of 1H-NMR facilitated a comprehensive reflection of the chemical composition information of process intermediates, enabling investigations into the transfer of multi-component substances and accurate identification of critical processes and chemical markers.

Characterization of wheat dough and Chinese steamed bread using mealworm powder formulated with medium-gluten and whole wheat flour.

BACKGROUND: Mealworm (Tenebrio molitor) larvae are nutritious edible insects and exhibit the potential to act as protein substitutes in food products. In this study, we added mealworm powder as a substitute to medium-gluten wheat and whole wheat flours to enhance the quality of baked products. We compared the pasting, farinograph and extensograph properties of medium-gluten wheat and whole wheat flours replaced with different concentrations of mealworm powder to explore the interactions between flour and mealworm powder. RESULTS: Mealworm powder changed the pasting characteristics of medium-gluten wheat and whole wheat flours. After adding 20% mealworm powder, the pasting temperature of the medium-gluten wheat flour remained unchanged (approximately 89.9 °C), while the pasting temperature of whole wheat flour increased from 88.83 to 90.27 °C. Water absorption of medium-gluten and whole wheat flours exhibited a decreasing trend with increasing mealworm powder concentrations. Mealworm powder substitution resulted in stronger medium-gluten dough but exerted an opposite effect on the farinograph properties of whole wheat dough. Mealworm powder substitution decreased the stretching resistance of medium-gluten dough but increased that of whole wheat dough. With an increase in the concentration of mealworm powder, the specific volume of medium-gluten wheat steamed bread significantly increased from 1.69 mL g-1 (M0) to 3.31 mL g-1 (M10) whereas that of whole wheat steamed bread increased from 1.64 mL g-1 (M0) to 2.34 mL g-1 (M15). The addition of mealworm powder increased the protein, dietary fiber, lipid and sodium contents of steamed bread samples. CONCLUSIONS: This study provides a reference for the rheological properties of medium-gluten wheat and whole wheat flours substituted with mealworm powder and supports the addition of insects as a protein source in food products. © 2023 Society of Chemical Industry.

Multi-Analyte Discriminated ECL via Photonic Crystal-Enhanced Selectivity.

Electrochemiluminescence (ECL) has numerous merits such as high sensitivity and specificity for the detection applications on pharmacy, food safety, immunoassay, disease diagnosis, environmental monitoring, nucleic acid assay, and clinical treatment. However, the insufficiency of ECL luminescent reagents is restricting their adoption on complex systems or multi-analyte detections. In this work, to improve the selectivity and discrimination of ECL detection with one or less luminescent reagent, we employed multi-stopband photonic crystals (PCs) to enhance assigned ECL. The discrimination of ECL was well investigated to establish the quantitative description with PC stopbands. The multi-stopband PC electrode can facilely achieve 10 antibiotics qualitative and quantitative analysis with 100% accuracy and 0.44 µM LOD in PBS buffer and human serum. The selectivity of ECL detection for multi-analytes can be improved via designed PC luminescence amplifications. The exploration on PC selectivity for ECL enhancement will promote the realistic application of the ECL technique and contribute to the facile and efficient optical platform for clinical or health monitoring.

A multivariate curve resolution-alternating least squares (MCR-ALS) technology assisted 1 H-NMR methodology for multi-component quantitation of Trichosanthis Pericarpium injection.

INTRODUCTION: Trichosanthis Pericarpium injection (TPI) is a traditional Chinese medicine preparation obtained from Trichosanthis Pericarpium by extraction, purification and sterilisation. It contains amino acids, alkaloids, nucleotides and other components. Existing quantitative methods only analyse a few components in injections, so this study intends to develop a method for comprehensive analysis of TPI components. OBJECTIVE: To develop a method for quantification of components in TPI by multivariate curve resolution-alternating least squares (MCR-ALS) assisted proton nuclear magnetic resonance (1 H-NMR). METHODS: A 1 H-NMR method was developed for the quantification of components in TPI. For components with independent signals, 3-(trimethylsilyl) propionic-2,2,3,3-d4 acid sodium salt (TSP) was used as an internal standard to calculate the component contents. For components with overlapping signals, the method of MCR-ALS was used. RESULTS: A total of 36 components were identified in TPI, of which 33 were quantified. Methodological validation results showed that the developed 1 H-NMR method has good linearity, accuracy, precision, robustness and specificity. CONCLUSION: The use of 1 H-NMR provides a reliable and universal method for the TPI components identification and quantification. Also, it can be used as a powerful tool for analysing the contents in a complex mixture as a quality control measure.

Quantitative profiling of comprehensive composition in compound herbal injections: An NMR approach applied on Shenmai injection.

INTRODUCTION: Compound herbal injections (CHIs) can be regarded as a significant innovation in the modernisation of herbal medicine. Therefore, improving the quality control level of CHIs has always been an active research topic in traditional herbal medicine. OBJECTIVES: In this study, Shenmai injection was used as a representative sample for investigating the ability of proton nuclear magnetic resonance (1 H NMR) in the quality evaluation of CHIs. METHODS: A quantitative 1 H NMR method was developed to simultaneously determine the contents of total ginsenosides, polysorbate 80, and 20 primary metabolites in Shenmai injection. Multivariate statistical analysis was combined to compare differences between samples from different manufacturers. RESULTS: It was found that the combined measurement uncertainty of each component is less than 1.61%, which demonstrates the reliability of the method. Furthermore, the components determined by this method account for up to 92.64% of the total solids, which is an unprecedented success in the analysis of Shenmai injection. In the end, the method was applied to the quality comparison of Shenmai injection from six manufacturers. The results showed that the differences among the samples from the six manufacturers were reflected in multiple types of components. CONCLUSION: This study fully demonstrates the superiority of the quantitative 1 H NMR method in comprehensive composition profiling of CHIs, which is conducive to improving the quality control level of Shenmai injection. Further, the present study can be used as a reference study for the research on the quality and safety of CHIs.

[NMR method for simultaneous determination of 21 chemical components in Danhong Injection].

Danhong Injection, a compound Chinese medicine injection prepared from Salviae Miltiorrhizae Radix et Rhizoma and Carthami Flos, is used in the clinical treatment of coronary heart disease, cerebral thrombosis, myocardial infarction, angina pectoris and other cardiovascular and cerebrovascular diseases. In this study, a quantitative method for simultaneous determination of multiple components in Danhong Injection was developed based on ~1H-qNMR technology and then methodological verification was carried out. The results showed that the established method had good methodological indexes. This method can simultaneously determine the content of 21 chemical components including 6 amino acids, 4 small molecular organic acids, 5 sugars and their derivatives, 1 nucleoside, and 5 aromatic compounds in Danhong Injection. The total content accounted for about 85% of the total solid mass, which reflected the great advantage of ~1H-qNMR method in the analysis of Chinese medicine injections. The ~1H-qNMR method for simultaneous determination of multiple components in Danhong Injection developed in this study has simple operation, short analysis time, and wide application range, which has practical significance for the quality evaluation of Danhong Injection and provides reference for the development of quality control methods for Chinese medicine injections.

Detention of copper by sulfur nanoparticles inhibits the proliferation of A375 malignant melanoma and MCF-7 breast cancer cells.

Selective induction of cell death or growth inhibition of cancer cells is the future of chemotherapy. Clinical trials have found that cancer tissues are enriched with copper. Based on this finding, many copper-containing compounds and complexes have been designed to "copper" cancer cells using copper as bait. However, recent studies have demonstrated that copper boosts tumor development, and copper deprivation from serum was shown to effectively inhibit the promotion of cancer. Mechanistically, copper is an essential cofactor for mitogen-activated protein kinase (MAPK)/extracellular activating kinase (ERK) kinase (MEK), a central molecule in the BRAF/MEK/ERK pathway. Therefore, depleting copper from cancer cells by directly sequestering copper has a wider field for research and potential for combination therapy. Based on the affinity between sulfur and copper, we therefore designed sulfur nanoparticles (Nano-S) that detain copper, achieving tumor growth restriction. We found that spherical Nano-S could effectively bind copper and form a tighter surficial structure. Moreover, this Nano-S detention of copper effectively inhibited the proliferation of A375 melanoma and MCF-7 breast cancer cells with minimum toxicity to normal cells. Mechanistic studies revealed that Nano-S triggered inactivation of the MEK-ERK pathway followed by inhibition of the proliferation of the A375 and MCF-7 cells. In addition, lower Nano-S concentrations and shorter exposure stimulated the expression of a copper transporter as compensation, which further increased the cellular uptake and anticancer activities of cisplatin. Collectively, our results highlight the potential of Nano-S as an anticancer agent or adjuvant through its detention of copper.

Facile synthesis of S-Ag nanocomposites and Ag2S short nanorods by the interaction of sulfur with AgNO3 in PEG400.

A facile, eco-friendly and inexpensive method to prepare Ag2S short nanorods and S-Ag nanocomposites using sublimed sulfur, AgNO3, PVP and PEG400 was studied. According to x-ray diffraction and scanning electron microscopy of the Ag2S, the products are highly crystalline and pure Ag2S nanorods with diameters of 70-160 nm and lengths of 200-360 nm. X-ray diffraction of the S-Ag nanocomposites shows that we obtained cubic Ag and S nanoparticles. Transmission electron microscopy shows that the molar ratio of PVP to Ag(+) plays an important role in controlling the size and morphology of the S-Ag nanocomposites. When the molar ratio of PVP to Ag(+) was 10:1, smaller sizes, better dispersibility and narrower distribution of S-Ag nanocomposites with diameters of 10-40 nm were obtained. The formation mechanism of the S-Ag nanocomposites was studied by designing a series of experiments using ultraviolet-visible measurement, and it was found that S nanoparticles are produced first and act as seed crystals; then Ag(+) becomes Ag nanocrystals on the surfaces of the S nanoparticles by the reduction of PVP. PEG400 acts as a catalyzer, accelerating the reaction rate, and protects the S-Ag nanocomposites from reacting to produce Ag2S. The antimicrobial experiments show that the S-Ag nanocomposites have greater antimicrobial activity on Staphylococcus aureus, Aspergillus niger and blue mold than Ag nanoparticles.

Enhancing the electrochemical properties of TiNb2O7 anodes with SP-CNT binary conductive agents for both liquid and solid state lithium ion batteries.

A high performance oxide composite electrode is obtained with a two-step solid state calcined titanium niobium oxide TiNb2O7 (TNO) anode and super P-carbon nanotube (SP-CNT) binary conductive agents. The solid state synthesized TNO-0.2C (the proportion of CNTs in the binary conductive agent is 20% wt) anode exhibits a high reversible discharge capacity of 278.6 mA h g-1 at 0.5C, a competitive rate capability with reported works that employed wet chemical methods at moderate rates (178.1 mA h g-1 at 10C), and an excellent capacity retention of 92.2% after 200 cycles at 1.5C/1.5C. The enhancement in electrochemical properties of the TNO-0.2C anode is mainly attributed to the combination of the short range and long range conductive agents in the SP-CNT binary conductive system, which guarantees an efficient electronic conductive network. The Li|Li1.3Al0.3Ti1.7(PO4)3 composite polymer electrolyte (LATPCPEs)|TNO-0.2C solid state batteries are also assembled, which deliver a high initial reversible discharge capacity of 241.3 mA h g-1 at 1C and a good capacity retention rate of 93% after 50 cycles. This work provides an efficient way to improve the electrochemical properties of TNO anodes in lithium ion batteries, especially for solid state batteries.

Visual Gustation via Regulable Elastic Photonic Crystals.

The unique structural sensitivity of photonic crystals (PCs) endows them with stretchable or elastic tunability for light propagation and spontaneous emission modulation. Hydrogel PCs have been demonstrated to have biocompatibility and flexibility for potential human health detection and environmental security monitoring. However, current elastic PCs still possess a fixed elastic modulus and uncontrollable structural colors based on a tunable elastic modulus, posing considerable challenges for in situ detection, particularly in wearable or portable sensing devices. In this work, we introduced a novel chemo-mechanical transduction mechanism embedded within a photonic crystal nanomatrix, leading to the creation of structural colors and giving rise to a visual gustation sensing experience. By utilizing the captivating structural colors generated by the hydrogel PC, we employ abundant optical information to identify various analytes. The finite element analysis proved the electric field distribution in the PC matrix during stretch operations. The elastic-optical behaviors with various chemical cosolvents, including cations, anions, saccharides, or organic acids, were investigated. The mechanism of the Hofmeister effect regulating the elasticity of hydrogels was demonstrated with the network nanostructure of the hydrogels. The hydrogel PC matrix demonstrates remarkable capability in efficiently distinguishing a wide range of cations, anions, saccharides, and organic acids across various concentrations, mixtures, and even real food samples, such as tastes and soups. Through comprehensive research, a precise relationship between the structural colors and the elastic modulus of hydrogel PCs has been established, contributing to the biomatching elastic-optics platform for wearable devices, a dynamic environment, and clinical or health monitoring auxiliary.

Therapeutic potential of Lingjiao Gouteng decoction in acute alcohol intoxication and alcohol-induced brain injury involving the RhoA/ROCK2/NF-κB signaling pathway.

ETHNOPHARMACOLOGICAL RELEVANCE: Alcohol misuse persists as a prevalent societal concern and precipitates diverse deleterious consequences, entailing significant associated health hazards including acute alcohol intoxication (AAI). Binge drinking, a commonplace pattern of alcohol consumption, may incite neurodegeneration and neuronal dysfunction. Clinicians tasked with managing AAI confront a dearth of pharmaceutical intervention alternatives. In contrast, natural products have garnered interest due to their compatibility with the human body and fewer side effects. Lingjiao Gouteng decoction (LGD), a classical traditional Chinese medicine decoction, represents a frequently employed prescription in cases of encephalopathy, although its efficacy in addressing acute alcoholism and alcohol-induced brain injury remains inadequately investigated. AIM OF THE STUDY: To investigate the conceivable therapeutic benefits of LGD in AAI and alcohol-induced brain injury, while delving into the underlying fundamental mechanisms involved. MATERIALS AND METHODS: We established an AAI mouse model through alcohol gavage, and LGD was administered to the mice twice at the 2 h preceding and 30 min subsequent to alcohol exposure. The study encompassed the utilization of the loss of righting reflex assay, histopathological analysis, enzyme-linked immunosorbent assays, and cerebral tissue biochemical assays to investigate the impact of LGD on AAI and alcohol-induced brain injury. These assessments included a comprehensive evaluation of various biomarkers associated with the inflammatory response and oxidative stress. Finally, RT-qPCR, Western blot, and immunofluorescence staining were carried out to explore the underlying mechanisms through which LGD exerts its therapeutic influence, potentially through the regulation of the RhoA/ROCK2/NF-κB signaling pathway. RESULTS: Our investigation underscores the therapeutic efficacy of LGD in ameliorating AAI, as evidenced by discernible alterations in the loss of righting reflex assay, pathological analysis, and assessment of inflammatory and oxidative stress biomarkers. Furthermore, the results of RT-qPCR, Western blot, and immunofluorescence staining manifest a noteworthy regulatory effect of LGD on the RhoA/ROCK2/NF-κB signaling pathway. CONCLUSIONS: The present study confirmed the therapeutic potential of LGD in AAI and alcohol-induced brain injury, and the protective effects of LGD against alcohol-induced brain injury may be intricately linked to the RhoA/ROCK2/NF-κB signaling pathway.

Exploring metabolic responses and pathway changes in CHO-K1 cells under varied aeration conditions and copper supplementations using 1 H NMR-based metabolomics.

The optimization of bioprocess for CHO cell culture involves careful consideration of factors such as nutrient consumption, metabolic byproduct accumulation, cell growth, and monoclonal antibody (mAb) production. Valuable insights can be obtained by understanding cellular physiology to ensure robust and efficient bioprocess. This study aims to improve our understanding of the CHO-K1 cell metabolism using 1 H NMR-based metabolomics. Initially, the variations in culture performance and metabolic profiles under varied aeration conditions and copper supplementations were thoroughly examined. Furthermore, a comprehensive metabolic pathway analysis was performed to assess the impact of these conditions on the implicated pathways. The results revealed substantial alterations in the pyruvate metabolism, histidine metabolism, as well as phenylalanine, tyrosine and tryptophan biosynthesis, which were especially evident in cultures subjected to copper deficiency conditions. Conclusively, significant metabolites governing cell growth and mAb titer were identified through orthogonal partial least square-discriminant analysis (OPLS-DA). Metabolites, including glycerol, alanine, formate, glutamate, phenylalanine, and valine, exhibited strong associations with distinct cell growth phases. Additionally, glycerol, acetate, lactate, formate, glycine, histidine, and aspartate emerged as metabolites influencing cell productivity. This study demonstrates the potential of employing 1 H NMR-based metabolomics technology in bioprocess research. It provides valuable guidance for feed medium development, feeding strategy design, bioprocess parameter adjustments, and ultimately the enhancement of cell proliferation and mAb yield.

Protection effects of mice liver and lung injury induced by coronavirus infection of Qingfei Paidu decoction involve inhibition of the NLRP3 signaling pathway.

ETHNOPHARMACOLOGICAL RELEVANCE: Coronavirus Disease 2019 (COVID-19) is a grave and pervasive global infectious malady brought about by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), posing a significant menace to human well-being. Qingfei Paidu decoction (QFPD) represents a pioneering formulation derived from four classical Chinese medicine prescriptions. Substantiated evidence attests to its efficacy in alleviating clinical manifestations, mitigating the incidence of severe and critical conditions, and reducing mortality rates among COVID-19 patients. AIM OF THE STUDY: This study aims to investigate the protection effects of QFPD in mice afflicted with a coronavirus infection, with a particular focus on determining whether its mechanism involves the NLRP3 signaling pathway. MATERIALS AND METHODS: The coronavirus mice model was established through intranasal infection of Kunming mice with Hepatic Mouse Virus A59 (MHV-A59). In the dose-effect experiment, normal saline, ribavirin (80 mg/kg), or QFPD (5, 10, 20 g/kg) were administered to the mice 2 h following MHV-A59 infection. In the time-effect experiment, normal saline or QFPD (20 g/kg) was administered to mice 2 h post MHV-A59 infection. Following the assessment of mouse body weights, food consumption, and water intake, intragastric administration was conducted once daily at consistent intervals over a span of 5 days. The impact of QFPD on pathological alterations in the livers and lungs of MHV-A59-infected mice was evaluated through H&E staining. The viral loads of MHV-A59 in both the liver and lung were determined using qPCR. The expression levels of genes and proteins related to the NLRP3 pathway in the liver and lung were assessed through qPCR, Western Blot analysis, and immunofluorescence. RESULTS: The administration of QFPD was shown to ameliorate the reduced weight gain, decline in food consumption, and diminished water intake, all of which were repercussions of MHV-A59 infection in mice. QFPD treatment exhibited notable efficacy in safeguarding tissue integrity. The extent of hepatic and pulmonary injury, when coupled with QFPD treatment, demonstrated not only a reduction with higher treatment dosages but also a decline with prolonged treatment duration. In the dose-effect experiment, there was a notable, dose-dependent reduction in the viral loads, as well as the expression levels of IL-1ß, NLRP3, ASC, Caspase 1, Caspase-1 p20, GSDMD, GSDMD-N, and NF-κB within the liver of the QFPD-treated groups. Additionally, in the time-effects experiments, the viral loads and the expression levels of genes and proteins linked to the NLRP3 pathway were consistently lower in the QFPD-treated groups compared with the model control groups, particularly during the periods when their expressions reached their zenith in the model group. Notably, IL-18 showed only a modest elevation relative to the blank control group following QFPD treatment. CONCLUSIONS: To sum up, our current study demonstrated that QFPD treatment has the capacity to alleviate infection-related symptoms, mitigate tissue damage in infected organs, and suppress viral replication in coronavirus-infected mice. The protective attributes of QFPD in coronavirus-infected mice are plausibly associated with its modulation of the NLRP3 signaling pathway. We further infer that QFPD holds substantial promise in the context of coronavirus infection therapy.

Application of the Analytical Procedure Lifecycle Concept to a Quantitative 1H NMR Method for Total Dammarane-Type Saponins.

Dammarane-type saponins (DTSs) exist in various medicinal plants, which are a class of active ingredients with effects on improving myocardial ischemia and immunomodulation. In this study, a quantitative 1H NMR method of total DTSs in herbal medicines was developed based on the analytical procedure lifecycle. In the first stage (analytical procedure design), the Ishikawa diagram and failure mode effects and criticality analysis were used to conduct risk identification and risk ranking. Plackett-Burman design and central composite design were used to screen and optimize critical analytical procedure parameter. Then, the method operable design region was obtained through modeling. In the second stage (analytical procedure performance qualification), the performance of methodological indexes was investigated based on analytical quality by design. As examples of continued procedure performance verification, the method was successfully applied to determine the total DTSs in herbal pharmaceutical preparations and botanical extracts. As a general analytical method to quantify total DTSs in medicinal plants or pharmaceutical preparations, the developed method provides a new quality control strategy for various products containing dammarane-type saponin.

Effect of Adding Different Commercial Propylene Glycol Alginates on the Properties of Mealworm-Flour-Formulated Bread and Steamed Bread.

Mealworm-flour-formulated flour-based products have gained increasing attention; however, their textural properties need to be improved. Propylene glycol alginate (PGA) is a commercial food additive with excellent emulsifying and stabilizing capabilities. We evaluated the effects of adding three commercially available PGAs (0.3% w/w, as food additive) on the properties of 10% concentration of mealworm-flour-formulated bread and steamed bread. The results showed that, compared with the control (2.17 mL/g), three PGA brands (Q, M, and Y) significantly increased the specific volume of the bread to 3.34, 3.40, and 3.36 mL/g, respectively. Only PGA from brand Q significantly improved the specific volumes of bread and steamed bread. The color of the bread was affected by the Maillard reaction. The addition of PGAs also augmented the moisture content of the fresh bread crumbs and steamed bread crumbs. All three PGAs improved the textural properties of bread and steamed bread. During storage, PGA addition delayed the staling of bread and steamed bread. In summary, our study showed that the addition of 0.3% PGA from three different producers improved bread properties, with PGA from brand Q having the most substantial effect. PGA had a more substantial effect on bread than steamed bread. Our results provide a theoretical basis to guide the development of insect-formulated flour-based products.

Complications after endoscopic submucosal dissection for early colorectal cancer (Review).

Colorectal cancer (CRC) is a gastrointestinal malignancy that seriously threatens human life and health, resulting in a heavy disease burden. Endoscopic submucosal dissection (ESD) is widely used in clinical practice and is an effective treatment for early CRC (ECC). Colorectal ESD is a challenging operation, and the incidence of postoperative complications is relatively high because of the thin intestinal wall and limited space for endoscopic operations. Systematic reports on the postoperative complications of colorectal ESD, such as fever, bleeding and perforation, from both China and elsewhere are lacking. In the present review, progress in research on postoperative complications after ESD for ECC is summarized.

Effect of Partial Substitution of Flour with Mealworm (Tenebrio molitor L.) Powder on Dough and Biscuit Properties.

Mealworm (Tenebrio molitor L.) is a type of edible insect rich in protein that has become popular as a protein-alternative ingredient in flour-based products to improve the nutritional properties of baking products. The mealworm powder substitution affected the pasting, farinograph, extensograph properties of wheat flour and the texture, nutritional, and sensory properties of the resulting soda biscuit. The pasting parameters (peak viscosity, trough viscosity, breakdown viscosity, final viscosity, and setback viscosity) and the water absorption decreased with the increased mealworm powder substitution level, which was ascribed to the dilution effect of mealworm powder. The farinograph parameters remained similar up to 15% substitution level. The extensograph results showed that mealworm powder substitution decreased the elastic properties of wheat dough as indicated by the consistently decreased extensibility, stretching energy, and stretching resistance, resulting in a significantly decreased baking expansion ratio of the soda biscuit. The protein, lipid, and dietary fiber content of the biscuits increased accordingly with the increased mealworm powder substitution level. The protein content of the soda biscuit was gradually increased from 9.13/100 g for the control (M0) to 16.0/100 g for that supplemented with 20% mealworm powder (M20), accompanied with the significantly increased essential amino acid content. Meanwhile, the fat and dietary fiber content of M20 exhibited 20.5 and 21.7% increase compared to those of M0. The score of the sensory attributes showed no significant difference up to 15% substitution level. The results demonstrated the 15% mealworm powder substitution level would not significantly affect the farinograph property, microstructure of wheat dough, and sensory acceptability.

Effect of Mealworm Powder Substitution on the Properties of High-Gluten Wheat Dough and Bread Based on Different Baking Methods.

Mealworms (Tenebrio molitor) are protein-rich edible insects that have been regarded as novel food ingredients. In this study, high-gluten wheat flour was formulated with dried mealworm powder at various levels (0%, 5%, 10%, 15%, and 20%) to study its influence on the pasting, farinograph, and extensograph properties and microstructure of the dough. A subsequent decrease in the pasting parameters was observed due to starch dilution. The water absorption, dough development time, and dough stability time decreased gradually from 71.9% to 68.67%, 13.6 min to 10.43 min, and 14.1 min to 5.33 min, respectively, with the increase in the substitution of mealworm powder from 0% to 20%. The farinograph characteristics corresponded to a weak gluten network formed through the dilution of gluten by the replacement of wheat flour with a non-gluten ingredient. The stretch ratio of the high-gluten dough increased gradually from 4.37 (M0) to 6.33 (M15). The increased stretching resistance and extensibility of the dough with 5% and 10% mealworm powder indicated that mealworm powder can act as a plasticizer in the gluten network, which might contribute to the decreased strength and increased elasticity and flexibility of the dough network. The bread made with three different baking methods showed similar increases in specific volume and decreased hardness up to the 10% substitution level, owing to the increased elasticity and flexibility of the dough. The GB/T 35869-2018 Rapid-baking method, GB/T 14611-2008 Straight dough method, and automatic bread maker method exhibited the highest specific volumes of 3.70 mL/g, 3.79 mL/g, and 4.14 mL/g when the wheat flour was substituted with 10% mealworm powder. However, 15% and 20% mealworm powder substitution markedly reduced the bread quality owing to the dilution effect and mealworm powder phase separation. These results provide a perspective on the relationship between the rheological properties of mealworm powder-substituted high-gluten dough and application suggestions for insect food development in the food industry.

A Rainbow Structural Color by Stretchable Photonic Crystal for Saccharide Identification.

Photonic crystals (PCs) with fascinating structural color nanomaterials present effectively spontaneous emission modulation and selectively optical signal amplification. Stretchability or elasticity could enable the feasible tunability for structural colors. Aimed at the regulation of structural colors, we endeavored to achieve the PC nanomatrix evolution and optical property during stretching. In this work, a rainbow structural color by stretchable PCs was exploited to provide abundant optical information for multianalyte recognition. The finite element analysis proved the electric field distribution in the PC matrix, which completely matched with the phenomenon of the measured PC spectra. By simply employing analysis of the multistate PC during stretching, the mono PC matrix chip can differentially enhance fluorescence signals in broad spectral regions, resulting in diverse sensing information for high-efficiency multianalysis. The stretchable PC chip can facilely discriminate 14 similar structured saccharides with a minimum concentration of 10-7 M using only one fluorescence complex. Furthermore, saccharides in different concentrations, mixtures, and real samples (beverages and sweets) also can be successfully distinguished. The exploration on fluorescent stretch dependence behavior of the photonic crystal contributes the biomatching optical platform for wearable devices, dynamic environment, clinical, or health monitoring auxiliary.

[Oxidation of cationic red 3R in water with H2O2 catalyzed by mineral loaded with Fe/Co].

Catalyst supported on pyrite was prepared by the impregnation method to enhance the activity of catalyst and characterized by scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and X-ray diffraction (XRD). Some Fe2O3 and CoFe2O4 species were formed on the surface of pyrite. Synthetized catalyst was used to catalyze H2O2 oxidative discoloration of azo dye. Under the conditions of the catalyst adding dosage of 3 g x L (-1), H2O2 adding dosageof 0.3 mL x L(-1), and the oxidation reaction timeof 1 h, results showed that about 99.8% of color removal rate and 58.4% of TOC removal rate could be achieved. The active ingredients of catalyst were Fe2O3 and CoFe2O4. Hydroxyl radical was determined during the reaction by ESR technology, the chromophore of dyes could be destroyed with 1 min, and small molecular substances might be produced during the process according to the spectrum analysis. Reaction with wide pH ranges is beneficial to overcome the limitation of traditional Fenton reactions. This technology might be used as a potential alternative for treatment of recalcitrant wastewater.