RESUMO
Though Sn-Pb alloyed perovskite solar cells (PSCs) achieved great progress, there is a dilemma to further increase Sn for less-Pb requirement. High Sn ratio (>70%) perovskite exhibits nonstoichiometric Sn:Pb:I at film surface to aggravate Sn2+ oxidation and interface energy mismatch. Here, ternary metal alloyed (FASnI3 )0.7 (MAPb1- x Znx I3 )0.3 (x = 0-3%) is constructed for Pb% < 30% perovskite. Zn with smaller ionic size and stronger ionic interaction than Sn/Pb assists forming high-quality perovskite film with ZnI6 4- enriched at surface to balance Sn:Pb:I ratio. Differing from uniform bulk doping, surface-rich Zn with lower lying orbits pushes down the energy band of perovskite and adjusts the interface energy for efficient charge transfer. The alloyed PSC realizes efficiency of 19.4% at AM1.5 (one of the highest values reported for Pb% < 30% PSCs). Moreover, stronger bonding of ZnâI and SnâI contributes to better durability of ternary perovskite than binary perovskite. This work highlights a novel alloy method for efficient and stable less-Pb PSCs.
RESUMO
Aqueous biphasic systems (ABSs) that are based on deep eutectic solvents (DESs) are environmentally benign systems to use for metal ion separation. In this work, a series of DESs was synthesized for the first time with PEG 400 as hydrogen bond donors and tetrabutylphonium bromide (P4Br), tetrabutylammonium bromide (N4Br), or tetrabutylammonium chloride (N4Cl) as hydrogen bond acceptors, and then they were combined with citrate (Na3C6H5O7), which is eco-friendly, to construct an ABS for use in the separation of Au(I) from an aurocyanide solution. Phase diagrams of DESs + Na3C6H5O7 + H2O systems were constructed using the experimentally measured data. Multiple factors that affect the efficiency of the gold extraction were studied; these factors were the species of salt or DES and their content, the equilibrium pH, the oscillation time, and the initial gold concentration. Gold(I) is preferentially retained in the DES-rich phase, and the P4Br:PEG 1:2 + Na3C6H5O7 + H2O system has a high extraction efficiency of 100.0% under optimized conditions. FT-IR, NMR, and TEM characterizations and DFT calculations show that the migration of Au(I) from the salt-rich to the DES-rich phase follows an ion exchange mechanism. Specifically, Au(CN)2- replaces Br- in the original P4Br and generates a stable ion pair with the quaternary phosphonium salt cation, P+, and this replacement is driven by electrostatic attractions. A new strong hydrogen bond network simultaneously forms between the anionic Au(CN)2- and the -OH group in the PEG 400 component. Finally, the gold of Au(I)-loaded P4Br:PEG 1:2 can be successfully reduced by sodium borohydride with an efficiency of 100.0%. The strategy to extract gold(I) from alkaline cyanide solutions using an ABS based on DESs as proposed in this work provides a potential platform for developing green technology for recovering gold.
RESUMO
Recently, narrow bandgap tin-lead mixed perovskite solar cells (PSCs) have become a research hotspot because they can be applied in tandem cells to break the Shockley-Queisser radiative limit of the single junction PSCs. However, the introduction of tin, on the one hand, makes the crystal quality of perovskite thin film worse, leading to the increase of film defects; on the other hand, the easy oxidation of divalent tin also leads to the increase of defect states, which seriously affects the photoelectric conversion efficiency of tin-lead cell devices. Good crystallization and low defect density of perovskite layer are very important to ensure good light absorption and photogenerated carrier generation and transport. Here, we adjust the crystallization of tin-lead perovskite films by a Lewis base-urea (CO(NH2)2), which significantly increases the grain size and improves the film morphology. At the same time, because of the Lewis base property of urea, the uncoordinated Pb2+and Sn2+defects of Lewis acids in the tin-lead films are effectively passivated, and the occurrence of non-radiative recombination in the films is reduced. Under the dual effects of improving crystallization and passivating defects, the photoelectric performance of tin-lead perovskite solar cell devices is significantly improved to 18.1% compared with the original device of 15.4%.
RESUMO
Three novel copper Schiff base complexes, L1Cu(OAc)-L3Cu(OAc), bearing NNO tridentate ligands were synthesized and successfully entrapped in zeolite. All free and encapsulated complexes were fully characterized through experiments combined with theoretical calculations, and were subsequently employed as catalysts to activate H2O2 for degradation of methylene blue (MB). The catalytic activity of free complexes was tunable by substitution effects. The complex L3Cu(OAc) displayed enhanced efficiency by adopting bulky and donor substitutions due to the lower oxidation states. However, the free complexes exhibited modified structural and catalytic properties upon encapsulation into the zeolite. The constraint from the zeolite holes and coordination geometry caused the alteration of electronic structures and subsequently modified the reactivity. This study revealed that upon encapsulation, the larger molecular dimension of L3Cu(OAc) resulted in additional distorted geometry, leading to higher catalytic efficiency for MB degradation with more blue shifts in the UV-Vis spectrum. There was high catalytic activity by LnCu(OAc)-Y compared to that of the free complex, and high recyclability under near neutral conditions. In addition, the catalytic efficiency of L3Cu(OAc)-Y was higher or equivalent compared to other catalysts. This work provides new complexes with NNO tridentate ligands encapsulated inside zeolite and explains the relationship between the modified structure and functionality.
RESUMO
The poor film stability of Sn-Pb mixed perovskite film and the mismatched interface energy levels pose significant challenges in enhancing the efficiency of tin-lead (Sn-Pb) mixed perovskite solar cells. In this study, polyvinylpyrrolidone (PVP) is introduced into the PVK perovskite precursor solution, effectively enhancing the overall stability of the film. This improvement is achieved through the formation of robust coordination bonds between the carbonyl (C=O) in the pyrrole ring and the undercoordinated SnII and PbII, thereby facilitating the passivation of defects. Furthermore, the introduction of PVP inhibits the oxidation of tin (Sn), thereby enhancing the n-type characteristics of the perovskite film. This adjustment in the energy level of the PVK perovskite film proves instrumental in reducing interface energy loss, subsequently improving interface charge transfer and mitigating device recombination. Consequently, perovskite solar cells incorporating PVP achieve an outstanding champion power conversion efficiency (PCE) of 21.31%.
RESUMO
Air-processed perovskite solar cells (PSCs) with high photoelectric conversion efficiency (PCE) can not only further reduce the production cost but also promote its industrialization. During the preparation of the PSCs in ambient air, the contact of the buried interface not only affects the crystallization of the perovskite film but also affects the interface carrier transport, which is directly related to the performance of the device. Here, we optimize the buried interface by introducing 3-mercaptopropyltrimethoxysilane (MPTMS, (CH3O)3Si(CH2)3SH) on the nickel oxide (NiOx) surface. The crystallization of the perovskite film is improved by enhancing surface hydrophobicity; besides, the SH-based functional group of MPTMS passivates the uncoordinated lead at the interface, which effectively reduces the defects at the bottom interface of perovskite and inhibits the nonradiative recombination at the interface. Moreover, the energy level between the NiOx layer and the perovskite layer is better matched. Based on multiple functions of MPTMS modification, the open circuit voltage of the device is obviously improved, and efficient air-processed methylamine-free (MA-free) PSCs are realized with PCE reaching 21.0%. The device still maintains the initial PCE of 85% after 1000 h aging in the glovebox. This work highlights interface modification in air-processed MA-free PSCs to promote the industrialization of PSCs.
RESUMO
Tin-lead (Sn-Pb) mixed perovskite with a narrow bandgap is an ideal candidate for single-junction solar cells approaching the Shockley-Queisser limit. However, due to the easy oxidation of Sn2+, the efficiency and stability of Sn-Pb mixed perovskite solar cells (PSCs) still lag far behind that of Pb-based solar cells. Herein, highly efficient and stable FA0.5MA0.5Pb0.5Sn0.5I0.47Br0.03 compositional PSCs are achieved by introducing an appropriate amount of multifunctional Tin (II) oxalate (SnC2O4). SnC2O4 with compensative Sn2+ and reductive oxalate group C2O4 2- effectively passivates the cation and anion defects simultaneously, thereby leading to more n-type perovskite films. Benefitting from the energy level alignment and the suppression of bulk nonradiative recombination, the Sn-Pb mixed perovskite solar cell treated with SnC2O4 achieves a power conversion efficiency of 21.43%. More importantly, chemically reductive C2O4 2- effectively suppresses the notorious oxidation of Sn2+, leading to significant enhancement in stability. Particularly, it dramatically improves light stability.