Lithium Hydride in the Solid Electrolyte Interphase of Lithium-Ion Batteries as a Pulverization Accelerator of Silicon.

As a highly promising next-generation high-specific capacity anode, the industrial-scale utilization of micron silicon has been hindered by the issue of pulverization during cycling. Although numerous studies have demonstrated the effectiveness of regulating the inorganic components of the solid electrolyte interphase (SEI) in improving pulverization, the evolution of most key inorganic components in the SEI and their correlation with silicon failure mechanisms remain ambiguous. This study provides a clear and direct correlation between the lithium hydride (LiH) in the SEI and the degree of micron silicon pulverization in the battery system. The reverse lithiation behavior of LiH on micron silicon during de-lithiation exacerbates the localized stress in silicon particles and contributes to particle pulverization. This work successfully proposes a novel approach to decouple the SEI from electrochemical performance, which can be significant to decipher the evolution of critical SEI components at varied battery anode interfaces and analyze their corresponding failure mechanisms.

Interphase Regulation by Multifunctional Additive Empowering High Energy Lithium-Ion Batteries with Enhanced Cycle Life and Thermal Safety.

High energy density lithium-ion batteries (LIBs) adopting high-nickel layered oxide cathodes and silicon-based composite anodes always suffer from unsatisfied cycle life and poor safety performance, especially at elevated temperatures. Electrode /electrolyte interphase regulation by functional additives is one of the most economic and efficacious strategies to overcome this shortcoming. Herein, cyano-groups (-CN) are introduced into lithium fluorinated phosphate to synthesize a novel multifunctional additive of lithium tetrafluoro (1,2-dihydroxyethane-1,1,2,2-tetracarbonitrile) phosphate (LiTFTCP), which endows high nickel LiNi0.8 Co0.1 Mn0.1 O2 /SiOx -graphite composite full cell with an ultrahigh cycle life and superior safety characteristics, by adding only 0.5 wt % LiTFTCP into a LiPF6 -carbonate baseline electrolyte. It is revealed that LiTFTCP additive effectively suppresses the HF generation and facilitates the formation of a robust and heat-resistant cyano-enriched CEI layer as well as a stable LiF-enriched SEI layer. The favorable SEI/CEI layers greatly lessen the electrode degradation, electrolyte consumption, thermal-induced gassing and total heat-releasing. This work illuminates the importance of additive molecular engineering and interphase regulation in simultaneously promoting the cycling and thermal safety of LIBs with high-nickel NCMxyz cathode and silicon-based composite anode.

A Highly-Fluorinated Lithium Borate Main Salt Empowering Stable Lithium Metal Batteries.

Traditional lithium salts are difficult to meet practical application demand of lithium metal batteries (LMBs) under high voltages and temperatures. LiPF6, as the most commonly used lithium salt, still suffers from notorious moisture sensitivity and inferior thermal stability under those conditions. Here, we synthesize a lithium salt of lithium perfluoropinacolatoborate (LiFPB) comprising highly-fluorinated and borate functional groups to address the above issues. It is demonstrated that the LiFPB shows superior thermal and electrochemical stability without any HF generation under high temperatures and voltages. In addition, the LiFPB can form a protective outer-organic and inner-inorganic rich cathode electrolyte interphase on LiCoO2 (LCO) surface. Simultaneously, the FPB- anions tend to integrate into lithium ion solvation structure to form a favorable fast-ion conductive LiBxOy based solid electrolyte interphase on lithium (Li) anode. All these fantastic features of LiFPB endow LCO (1.9 mAh cm-2)/Li metal cells excellent cycling under both high voltages and temperatures (e.g., 80 % capacity retention after 260 cycles at 60 °C and 4.45 V), and even at an extremely elevated temperature of 100 °C. This work emphasizes the important role of salt anions in determining the electrochemical performance of LMBs at both high temperature and voltage conditions.

From materials to clinical use: advances in 3D-printed scaffolds for cartilage tissue engineering.

Osteoarthritis caused by articular cartilage defects is a particularly common orthopedic disease that can involve the entire joint, causing great pain to its sufferers. A global patient population of approximately 250 million people has an increasing demand for new therapies with excellent results, and tissue engineering scaffolds have been proposed as a potential strategy for the repair and reconstruction of cartilage defects. The precise control and high flexibility of 3D printing provide a platform for subversive innovation. In this perspective, cartilage tissue engineering (CTE) scaffolds manufactured using different biomaterials are summarized from the perspective of 3D printing strategies, the bionic structure strategies and special functional designs are classified and discussed, and the advantages and limitations of these CTE scaffold preparation strategies are analyzed in detail. Finally, the application prospect and challenges of 3D printed CTE scaffolds are discussed, providing enlightening insights for their current research.

Revealing Capacity Degradation of Ge Anodes in Lithium-Ion Batteries Triggered by Interfacial LiH.

The Germanium (Ge), as a fast-charging and high specific capacity (1568 mAh g-1 ) alloy anode, is greatly hampered in practical application by poor cyclability. To date, the understanding of cycling performance degradation remains elusive. This study illustrates that, contrary to conventional beliefs, most of the Ge material in failed anodes still retains good integrity and does not undergo severe pulverization. It is revealed that capacity degradation is clearly correlated to the interfacial evolution of lithium hydride (LiH). Tetralithium germanium hydride (Li4 Ge2 H), as a new species derived from LiH, is identified as the culprit of Ge anode degradation, which is the dominant crystalized component in an ever-growing and ever-insulating interphase. The significantly increased thickness of the solid electrolyte interface (SEI) is accompanied by the accumulation of insulating Li4 Ge2 H upon cycling, which severely retards the charge transport process and ultimately triggers the anode failure. We believe that the comprehensive understanding of the failure mechanism presented in this study is of great significance to promoting the design and development of alloy anode for the next generation of lithium-ion batteries.

Highly Oxidative-Resistant Cyano-Functionalized Lithium Borate Salt for Enhanced Cycling Performance of Practical Lithium-Ion Batteries.

Lithium difluoro(oxalato) borate (LiDFOB) has been widely investigated in lithium-ion batteries (LIBs) owing to its advantageous thermal stability and excellent aluminum passivation property. However, LiDFOB tends to suffer from severe decomposition and generate a lot of gas species (e.g., CO2 ). Herein, a novel cyano-functionalized lithium borate salt, namely lithium difluoro(1,2-dihydroxyethane-1,1,2,2-tetracarbonitrile) borate (LiDFTCB), is innovatively synthesized as a highly oxidative-resistant salt to alleviate above dilemma. It is revealed that the LiDFTCB-based electrolyte enables LiCoO2 /graphite cells with superior capacity retention at both room and elevated temperatures (e.g., 80 % after 600 cycles) with barely any CO2 gas evolution. Systematic studies reveal that LiDFTCB tends to form thin and robust interfacial layers at both electrodes. This work emphasizes the crucial role of cyano-functionalized anions in improving cycle lifespan and safety of practical LIBs.

Wedge method for landfill stability analysis considering temperature increase.

The increase in landfill temperature often results in shear strength reduction of both the solid waste and the liner, which leads to slope instability. However, very few landfill slope analysis methods can simultaneously consider the effect of temperature on the shear strength of the waste solid and the liner. In this study, based on the strength parameters of the liner and waste with temperature, a wedge method for translational failure analysis of landfills considering temperature increase was established. The results showed that rising temperatures caused by biochemical degradation at the bottom and middle of the landfill reduced the anti-slide force of back slope more than that of bottom slope. With the leachate level increasing, the effect of temperature rise on landfill stability became obvious. The feasibility of the proposed wedge method was verified by the engineering case study of Xiaping Landfill, Shenzhen, China. This study probably provides important guidance for the design, operation and management of municipal solid waste landfills.

Effect of elevated temperature on solid waste shear strength and landfill slope stability.

Slope instability occurs in landfills owing to increased internal temperatures. However, strength characteristic tests for solid waste (SW) and landfill slope stability (SS) calculations that consider temperature variations are scarce in the literature. In this study, we conducted triaxial tests on SW under a range of temperature conditions and proposed the circular slide method (CSM) for calculating SS in consideration of temperature effects. SW cohesion decreased linearly with increasing temperature, whereas the internal friction angle remained essentially unchanged. Our results showed that higher temperatures reduced the SW shear strength, changing the most dangerous sliding arc away from the slope toe. The landfill slope safety factor decreased by more than 20% with an increase of the maximum temperature from 20°C to 50°C. Reduction of the leachate level (LL) led to a decrease in the landfill high-temperature zone and the safety factor increased according to LL and temperature distribution. If cooling pipes are used to control the SW temperature, we recommend arranging the cooling pipes on the landfill liner. The proposed CSM can be used to analyse landfill SS.

The Formation/Decomposition Equilibrium of LiH and its Contribution on Anode Failure in Practical Lithium Metal Batteries.

Discovering the underlying reason for Li anode failure is a critical step towards applications of lithium metal batteries (LMBs). In this work, we conduct deuterium-oxide (D2 O) titration experiments in a novel on-line gas analysis mass spectrometry (MS) system, to determine the content of metallic Li and lithium hydride (LiH) in cycled Li anodes disassembled from practical LiCoO2 /Li LMBs. The practical cell is comprised of ultrathin Li anode (50 µm), high loading LiCoO2 (17 mg cm-2 , 2.805 mAh cm-2 ) and different formulated electrolytes. Our results suggest that the amount of LiH accumulation is negatively correlated with cyclability of practical LMBs. More importantly, we reveal a temperature sensitive equilibrium (Li + 1/2 H2 ⇌ LiH) governing formation and decomposition process of LiH at Li anode. We believe that the unusual understanding provided by this study will draw forth more insightful efforts to realize efficient Li protection and the ultimate applications of "holy grail" LMBs.

Formulation of Blended-Lithium-Salt Electrolytes for Lithium Batteries.

Blended-salt electrolytes showing synergistic effects have been formulated by simply mixing several lithium salts in an electrolyte. In the burgeoning field of next-generation lithium batteries, blended-salt electrolytes have enabled great progress to be made. In this Review, the development of such blended-salt electrolytes is examined in detail. The reasons for formulating blended-salt electrolytes for lithium batteries include improvement of thermal stability (safety), inhibition of aluminum-foil corrosion of the cathode current collector, enhancement of performance over a wide temperature range (or at a high or low temperature), formation of favorable interfacial layers on both electrodes, protection of the lithium metal anode, and attainment of high ionic conductivity. Herein, we highlight key scientific issues related to the formulation of blended-salt electrolytes for lithium batteries.

Additive-Assisted Novel Dual-Salt Electrolyte Addresses Wide Temperature Operation of Lithium-Metal Batteries.

In this study, self-synthesized lithium trifluoro(perfluoro-tert-butyloxyl)borate (LiTFPFB) is combined with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) to formulate a novel 1 m dual-salt electrolyte, which contains lithium difluorophosphate (LiPO2 F2 ) additive and dominant carbonate solvents with low melting point and high boiling point. The addition of LiPO2 F2 into this novel dual-salt electrolyte dramatically improves cycleability and rate capability of a LiNi0.5 Mn0.3 Co0.2 O2 /Li (NMC/Li) battery, ranging from -40 to 90 °C. The NMC/Li batteries adopt a Li-metal anode with low thickness of 100 µm (even 50 µm) and a moderately high cathode mass loading level of 10 mg cm-2 . For the first time, this paper provides valuable perspectives for developing practical lithium-metal batteries over a wide temperature range.

Identification and characterization of the Cucurbitacins, a novel class of small-molecule inhibitors of Tropomyosin receptor kinase a.

BACKGROUND: NGF-TrkA is well known to play a key role in propagating and sustaining pruritogenic signals, which form the pathology of chronic pruritus. Inhibition of NGF-TrkA is a known strategy for the treatment of pruritus. In the present paper, we describe the identification, in vitro characterization, structure-activity analysis, and inhibitory evaluation of a novel TrkA inhibitory scaffold exemplified by Cucurbitacins (Cus). METHODS: Cus were identified as TrkA inhibitors in a large-scale kinase library screen. To obtain structural models of Cus as TrkA inhibitors, AutoDock was used to explore their binding to TrkA. Furthermore, PC12 cell culture systems have been used to study the effects of Cus and traditional Chinese medicinal plants (Tian Gua Di and bitter gourd leaf) extracts on the kinase activity of TrkA. RESULTS: Cus block the phosphorylation of TrkA on several tyrosine sites, including Tyr490, Tyr674/675, and Tyr785, and inhibit downstream Akt and MAPK phosphorylation in response to NGF in PC12 cell model systems. Furthermore, traditional Chinese medicinal plants (Tian Gua Di and bitter gourd leaf) containing Cu extracts were shown to inhibit the phosphorylation of TrkA and Akt. These data reveal mechanisms, at least partly, of the anti-pruritus bioactivity of Cus. CONCLUSION: Taken together, with the recent discovery of the important role of TrkA as a therapeutic target, Cus could be the basis for the design of improved TrkA kinase inhibitors, which could someday help treat pruritus.

Methyl-modified silica nanobowl for 2D self-organized nanostructure with hydrophobic performance.

A facial method of fabricating methyl-modified silica nanobowl using a polystyrene template with tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) as co-precursors was reported. The morphology of the nanobowl was determined by the mole ratio of TEOS and MTES, and the size and shell thickness of the PS@SiO2. And the 2D ordered nanostructure has also been developed with a nanobowl opening perpendicular to the glass substrate surface by the Langmuir-Blodgett technique. These 2D ordered nanobowl structures present an adjustable antireflection property. The single-side nanobowl coating has a transmission improvement of 4.5% compared to the uncoated glass at a wavelength of 540 nm. Furthermore, the nanobowl structures have good hydrophobicity with a contact angle up to 130° without any additional treatment. The quantitative deformation behavior of the methyl-modified silica nanobowl was also discussed.

CTAB micelles assisted rGO-AgNP hybrids for SERS detection of polycyclic aromatic hydrocarbons.

A structure of hexadecyl trimethyl ammonium bromide (CTAB) micelle-assisted reduced graphene oxide-Ag nanoparticle (rGO-AgNP) hybrids is designed and fabricated for SERS detection of nonpolar polycyclic aromatic hydrocarbons (PAHs), in which CTAB micelles act as the host material to capture PAH molecules. This method provides stable aqueous suspensions of functionalized graphene with an alkyl chain, since the rGO-AgNP hybrids do not need to be pre-modified by CTAB. The result shows that the CTAB-assisted rGO-AgNP substrate has excellent SERS performance toward PAHs and ideal stability under continuous laser radiation. With further optimization, the detection limits of pyrene and perylene were 10(-6) M and 10(-7) M, respectively. Two different PAH molecules could be detected simultaneously by their characteristic peaks.

Electrolyte Engineering Toward High Performance High Nickel (Ni ≥ 80%) Lithium-Ion Batteries.

High nickel (Ni ≥ 80%) lithium-ion batteries (LIBs) with high specific energy are one of the most important technical routes to resolve the growing endurance anxieties. However, because of their extremely aggressive chemistries, high-Ni (Ni ≥ 80%) LIBs suffer from poor cycle life and safety performance, which hinder their large-scale commercial applications. Among varied strategies, electrolyte engineering is very powerful to simultaneously enhance the cycle life and safety of high-Ni (Ni ≥ 80%) LIBs. In this review, the pivotal challenges faced by high-Ni oxide cathodes and conventional LiPF6 -carbonate-based electrolytes are comprehensively summarized. Then, the functional additives design guidelines for LiPF6 -carbonate -based electrolytes and the design principles of high voltage resistance/high safety novel electrolytes are systematically elaborated to resolve these pivotal challenges. Moreover, the proposed thermal runaway mechanisms of high-Ni (Ni ≥ 80%) LIBs are also reviewed to provide useful perspectives for the design of high-safety electrolytes. Finally, the potential research directions of electrolyte engineering toward high-performance high-Ni (Ni ≥ 80%) LIBs are provided. This review will have an important impact on electrolyte innovation as well as the commercial evolution of high-Ni (Ni ≥ 80%) LIBs, and also will be significant to breakthrough the energy density ceiling of LIBs.

Priming of hippocampal microglia by IFN-γ/STAT1 pathway impairs social memory in mice.

Social behavior is inextricably linked to the immune system. Although IFN-γ is known to be involved in social behavior, yet whether and how it encodes social memory remains unclear. In the current study, we injected with IFN-γ into the lateral ventricle of male C57BL/6J mice, and three-chamber social test was used to examine the effects of IFN-γ on their social preference and social memory. The morphology of microglia in the hippocampus, prelimbic cortex and amygdala was examined using immunohistochemistry, and the phenotype of microglia were examined using immunohistochemistry and enzyme-linked immunosorbent assays. The IFN-γ-injected mice were treated with lipopolysaccharide, and effects of IFN-γ on behavior and microglial responses were evaluated. STAT1 pathway and microglia-neuron interactions were examined in vivo or in vitro using western blotting and immunohistochemistry. Finally, we use STAT1 inhibitor or minocycline to evaluated the role of STAT1 in mediating the microglial priming and effects of primed microglia in IFN-γ-induced social dysfunction. We demonstrated that 500 ng of IFN-γ injection results in significant decrease in social index and social novelty recognition index, and induces microglial priming in hippocampus, characterized by enlarged cell bodies, shortened branches, increased expression of CD68, CD86, CD74, CD11b, CD11c, CD47, IL-33, IL-1ß, IL-6 and iNOS, and decreased expression of MCR1, Arg-1, IGF-1 and BDNF. This microglia subpopulation is more sensitive to LPS challenge, which characterized by more significant morphological changes and inflammatory responses, as well as induced increased sickness behaviors in mice. IFN-γ upregulated pSTAT1 and STAT1 and promoted the nuclear translocation of STAT1 in the hippocampal microglia and in the primary microglia. Giving minocycline or STAT1 inhibitor fludarabin blocked the priming of hippocampal microglia induced by IFN-γ, ameliorated the dysfunction in hippocampal microglia-neuron interactions and synapse pruning by microglia, thereby improving social memory deficits in IFN-γ injected mice. IFN-γ initiates STAT1 pathway to induce priming of hippocampal microglia, thereby disrupts hippocampal microglia-neuron interactions and neural circuit link to social memory. Blocking STAT1 pathway or inhibiting microglial priming may be strategies to reduce the effects of IFN-γ on social behavior.

An Electrode-Crosstalk-Suppressing Smart Polymer Electrolyte for High Safety Lithium-Ion Batteries.

Electrode crosstalk between anode and cathode at elevated temperatures is identified as a real culprit triggering the thermal runaway of lithium-ion batteries. Herein, to address this challenge, a novel smart polymer electrolyte is prepared through in situ polymerization of methyl methacrylate and acrylic anhydride monomers within a succinonitrile-based dual-anion deep eutectic solvent. Owing to the abundant active unsaturated double bonds on the as-obtained polymer matrix end, this smart polymer electrolyte can spontaneously form a dense crosslinked polymer network under elevated temperatures, effectively slowing down the crosstalk diffusion kinetics of lithium ions and active gases. Impressively, LiCoO2/graphite pouch cells employing this smart polymer electrolyte demonstrate no thermal runaway even at the temperature up to 250 °C via accelerating rate calorimeter testing. Meanwhile, because of its abundance of functional motifs, this smart polymer electrolyte can facilitate the formation of stable and thermally robust electrode/electrolyte interface on both electrodes, ensuring the long cycle life and high safety of LIBs. In specific, this smart polymer electrolyte endows 1.1 Ah LiCoO2/graphite pouch cell with a capacity retention of 96% after 398 cycles at 0.2 C.

Deciphering the Lithium-Ion Conduction Mechanism of LiH in Solid-Electrolyte Interphase.

Lithium hydride (LiH) has been widely recognized as the critical component of the solid-electrolyte interphase (SEI) in Li batteries. Although the formation mechanism and structural model of LiH in SEI have been extensively reported, the role in electro-performance of LiH in SEI is still ambiguous and has proven challenging to explored due to the complicated structure SEI and the lack of advanced in situ experimental technology. In this study, the isotopic exchange experiments combined with isotopic tracer experiments is applied to solidly illustrate the superior conductivity and Li+ conduction behavior of the LiH in natural SEI. Importantly, in situ transmission electron microscopy analysis is utilized to visualize the self-electrochemical decomposition of LiH, which is significantly distinctive from LiF and Li2O. The critical experimental evidence discovered by the work demonstrates ion transport behaviors of key components in the SEI, which is imperative for designing novel SEI and augurs a new area in optimizing the performance of lithium batteries.

Recent Progress of Droplet Microfluidic Emulsification Based Synthesis of Functional Microparticles.

The remarkable control function over the functional material formation process enabled by droplet microfluidic emulsification approaches can lead to the efficient and one-step encapsulation of active substances in microparticles, with the microparticle characteristics well regulated. In comparison to the conventional fabrication methods, droplet microfluidic technology can not only construct microparticles with various shapes, but also provide excellent templates, which enrich and expand the application fields of microparticles. For instance, intersection with disciplines in pharmacy, life sciences, and others, modifying the structure of microspheres and appending functional materials can be completed in the preparation of microparticles. The as-prepared polymer particles have great potential in a wide range of applications for chemical analysis, heavy metal adsorption, and detection. This review systematically introduces the devices and basic principles of particle preparation using droplet microfluidic technology and discusses the research of functional microparticle formation with high monodispersity, involving a plethora of types including spherical, nonspherical, and Janus type, as well as core-shell, hole-shell, and controllable multicompartment particles. Moreover, this review paper also exhibits a critical analysis of the current status and existing challenges, and outlook of the future development in the emerging fields has been discussed.

MWCNTs-GNPs Reinforced TPU Composites with Thermal and Electrical Conductivity: Low-Temperature Controlled DIW Forming.

As an effective technique for fabricating conductive and thermally conductive polymer composites, a multi-filler system incorporates different types and sizes of multiple fillers to form interconnected networks with improved electrical, thermal, and processing properties. In this study, DIW forming of bifunctional composites was achieved by controlling the temperature of the printing platform. The study was based on enhancing the thermal and electrical transport properties of hybrid ternary polymer nanocomposites with multi-walled carbon nanotubes (MWCNTs) and graphene nanoplates (GNPs). With thermoplastic polyurethane (TPU) used as the matrix, the addition of MWCNTs, GNPs and both mixtures further improved the thermal conductivity of the elastomers. By adjusting the weight fraction of the functional fillers (MWCNTs and GNPs), the thermal and electrical properties were gradually explored. Here, the thermal conductivity of the polymer composites increased nearly sevenfold (from 0.36 W·m-1·k-1 to 2.87 W·m-1·k-1) and the electrical conductivity increased up to 5.49 × 10-2 S·m-1. It is expected to be used in the field of electronic packaging and environmental thermal dissipation, especially for modern electronic industrial equipment.