Discovery of Natural Products Alleviating Renal Fibrosis with a Viscosity-Responsive Molecular Probe.

Renal fibrosis poses a significant threat to individuals suffering from chronic progressive kidney disease. Given the absence of effective medications for treating renal fibrosis, it becomes crucial to assess the extent of fibrosis in real time and explore the development of novel drugs with substantial therapeutic benefits. Due to the accumulation of renal tissue damage and the uncontrolled deposition of fibrotic matrix during the course of the disease, there is an increase in viscosity both intracellularly and extracellularly. Therefore, a viscosity-sensitive near-infrared fluorescence (NIRF) and photoacoustic (PA) imaging probe, BDP-KY, was developed to detect aberrant changes in viscosity during fibrosis. Furthermore, BDP-KY has been applied to screen the effective components of herbal medicine, rhubarb, resulting in the identification of potential antirenal fibrotic compounds such as emodin-8-glucoside and chrysophanol 8-O-glucoside. Ultrasound, PA, and NIRF imaging of a unilateral uretera obstruction mice model show that different concentrations of emodin-8-glucoside and chrysophanol 8-O-glucoside effectively reduce viscosity levels during the renal fibrosis process. The histological results showed a significant decrease in fibrosis factors α-smooth muscle actin and collagen deposition. Combining these findings with their pharmacokinetic characteristics, these compounds have the potential to fill the current market gap for effective antirenal fibrosis drugs. This study demonstrates the potential of BDP-KY in the evaluation of renal fibrosis, and the two identified active components from rhubarb hold great promise for the treatment of renal fibrosis.

Follistatin-like 1 protects against doxorubicin-induced cardiotoxicity by preventing mitochondrial dysfunction through the SIRT6/Nrf2 signaling pathway.

Mitochondrial dysfunction and myocardial remodeling have been reported to be the main underlying molecular mechanisms of doxorubicin-induced cardiotoxicity. SIRT6 is a nicotinamide adenine dinucleotide-dependent enzyme that plays a vital role in cardiac protection against various stresses. Moreover, previous studies have demonstrated that FSTL1 could alleviate doxorubicin-induced cardiotoxicity by inhibiting autophagy. The present study investigated the probable mechanisms of FSTL1 on doxorubicin-induced cardiotoxicity in vivo and in vitro. We confirmed that FSTL1 exerted a pivotal protective role on cardiac tissue in vivo and on doxorubicin-induced cell injury in vitro. Furthermore, FSTL1 can alleviate doxorubicin-induced mitochondrial dysfunction by inhibiting autophagy and apoptosis. Further studies demonstrated that FSTL1 can activate SIRT6 signaling by restoring the SIRT6 protein expression in doxorubicin-induced myocardial injury. SIRT6 activation elevated the protein expression of Nrf2 in doxorubicin-induced H9C2 injury. Treatment with the Nrf2 inhibitor ML385 partially antagonized the cardioprotective role of SIRT6 on doxorubicin-induced autophagy or apoptosis. These results suggested that the protective mechanism of FSTL1 on doxorubicin-induced cardiotoxicity may be related with the inhibition of autophagy and apoptosis, partly through the activation of SIRT6/Nrf2.

High-energy-density zinc ion capacitors based on 3D porous free-standing defect-reduced graphene oxide hydrogel cathodes.

Zinc ion capacitors (ZICs) have shown potential for breaking the energy density ceiling of traditional supercapacitors (SCs) via appropriate device design. Nevertheless, a significant challenge remains in advancing ZIC positive electrode materials with excellent conductivity, high specific capacitance, and reliable cycle stability. A highly attractive option for carbon-based electrode materials is reduced graphene oxide (RGO) due to its vast specific surface area, prominent porosity, and 3D cross-linked frame. However, the tight stacking of RGO sheets driven by van der Waals forces can restrict active sites, decrease specific capacitance, and elevate electrochemical impedance. To overcome these challenges, 3D defective RGO (DRGO) hydrogels were prepared by a metal Co cocatalytic gasification reaction. This method produced mesoporous defects on the surface of RGO hydrogels via a low-temperature hydrothermal self-assembly strategy. The surface of the layer has a wide and uniform distribution, which can offer abundant redox active sites, rich ion transfer channels, and fast reaction kinetics. In this work, 3D DRGO//Zn exhibited a wide operating window (0-1.8 V), high specific capacitance (189.39 F g-1 at 1 A g-1), outstanding energy density (85.23 W h kg-1 at 960.31 W kg-1; 52.36 W h kg-1 at 17454.87 W kg-1), and persistent cycling life (98.86% initial capacitance retention after 10 000 cycles at 10 A g-1). This study emphasizes the device design of ZIC and promising prospects of using 3D DRGO hydrogel as a feasible positive electrode for ZIC.

Neofunctionalization of a second insulin receptor gene in the wing-dimorphic planthopper, Nilaparvata lugens.

A single insulin receptor (InR) gene has been identified and extensively studied in model species ranging from nematodes to mice. However, most insects possess additional copies of InR, yet the functional significance, if any, of alternate InRs is unknown. Here, we used the wing-dimorphic brown planthopper (BPH) as a model system to query the role of a second InR copy in insects. NlInR2 resembled the BPH InR homologue (NlInR1) in terms of nymph development and reproduction, but revealed distinct regulatory roles in fuel metabolism, lifespan, and starvation tolerance. Unlike a lethal phenotype derived from NlInR1 null, homozygous NlInR2 null mutants were viable and accelerated DNA replication and cell proliferation in wing cells, thus redirecting short-winged-destined BPHs to develop into long-winged morphs. Additionally, the proper expression of NlInR2 was needed to maintain symmetric vein patterning in wings. Our findings provide the first direct evidence for the regulatory complexity of the two InR paralogues in insects, implying the functionally independent evolution of multiple InRs in invertebrates.

Vestigial mediates the effect of insulin signaling pathway on wing-morph switching in planthoppers.

Wing polymorphism is an evolutionary feature found in a wide variety of insects, which offers a model system for studying the evolutionary significance of dispersal. In the wing-dimorphic planthopper Nilaparvata lugens, the insulin/insulin-like growth factor signaling (IIS) pathway acts as a 'master signal' that directs the development of either long-winged (LW) or short-winged (SW) morphs via regulation of the activity of Forkhead transcription factor subgroup O (NlFoxO). However, downstream effectors of the IIS-FoxO signaling cascade that mediate alternative wing morphs are unclear. Here we found that vestigial (Nlvg), a key wing-patterning gene, is selectively and temporally regulated by the IIS-FoxO signaling cascade during the wing-morph decision stage (fifth-instar stage). RNA interference (RNAi)-mediated silencing of Nlfoxo increase Nlvg expression in the fifth-instar stage (the last nymphal stage), thereby inducing LW development. Conversely, silencing of Nlvg can antagonize the effects of IIS activity on LW development, redirecting wing commitment from LW to the morph with intermediate wing size. In vitro and in vivo binding assays indicated that NlFoxO protein may suppress Nlvg expression by directly binding to the first intron region of the Nlvg locus. Our findings provide a first glimpse of the link connecting the IIS pathway to the wing-patterning network on the developmental plasticity of wings in insects, and help us understanding how phenotypic diversity is generated by the modification of a common set of pattern elements.

Beneficial In Vitro Effects of Polysaccharide and Non-Polysaccharide Components of Dendrobium huoshanense on Gut Microbiota of Rats with Type 1 Diabetes as Opposed to Metformin.

The extract of Dendrobium huoshanense, a traditional Chinese medicinal and food homologous plant belonging to the family Orchidaceae, was previously reported to have hypoglycemic and antioxidant effects. In this study, the direct effects of polysaccharide (DHP) and non-polysaccharide (NDHP) components of D. huoshanense, as well as its water extract (DHWE) were compared with that of metformin (an antidiabetic drug) on the gut microbiota (collected from fecal flora) of rats with streptozotocin-induced type 1 diabetes (T1D) using an in vitro fermentation method. The results showed that DHWE, DHP, and NDHP reduced pH and increased bacterial proliferation and short-chain fatty acid (SCFA) content in fermentation broth. DHWE, DHP, NDHP and metformin promoted the production of acetic and propionic acid, acetic acid, propionic acid and butyric acid, and propionic acid, respectively. DHWE, DHP, and NDHP reduced the abundance of Proteobacteria (subdominant pathogenic bacteria) and increased the abundance of Firmicutes (dominant beneficial gut bacteria). NDHP also reduced the abundance of Bacteroidetes (beneficial and conditional pathogenic). Metformin increased the abundance of Proteobacteria and reduced the abundance of Firmicutes and Bacteroidetes. At the genus level, NDHP promoted the proliferation of Megamonas and Megasphaera and decreased harmful bacteria (e.g., Klebsiella), and DHP increased the abundance of Prevotellaceae (opportunistic and usually harmless). By contrast, metformin increased the abundance of harmful bacteria (e.g., Citrobacter) and reduced the abundance of beneficial bacteria (e.g., Oscillospira). Our study indicates that DHWE, DHP, and NDHP are potentially more beneficial than metformin on the gut microbiota of T1D rats in vitro.

Hierarchical V4C3TX@NiO-reduced graphene oxide heterostructure hydrogels and defective reduced graphene oxide hydrogels as free-standing anodes and cathodes for high-performance asymmetric supercapacitors.

Asymmetric supercapacitors (ASCs) based on a battery-type anode and a capacitive-type cathode have been attracting extensive interest because of their high energy density. Herein, NiO nanosheets are hydrothermally deposited onto a V4C3TX substrate, which are then assembled into a 3D porous heterostructure hydrogel through a graphene oxide-assisted self-convergence hydrothermal process at low temperatures. The resultant hierarchical V4C3TX@NiO-RGO heterostructure hydrogel exhibits an ultrahigh specific capacitance of up to 1014.5 F g-1 at 1 A g-1. In addition, a defective reduced graphene oxide (DRGO) hydrogel is prepared using a cost-effective hydrothermal procedure followed by cobalt-catalyzed gasification, which shows a higher specific capacitance (258 F g-1 at 1 A g-1) than the untreated RGO hydrogel (176 F g-1). These two electrodes are then assembled into an ASC; the device features a stable operating voltage of 1.8 V, a maximum energy density of 86.22 W h kg-1 at 900 W kg-1, and excellent cycling stability at 96.4% capacitance retention after 10 000 cycles at 10 A g-1. The results from this work highlight the unique potential of MXene-based materials for the construction of high-performance ASCs.

A Ti3C2Tx@PANI core-shell heterostructure assembled into a 3D porous hydrogel as a free-standing electrode for high-energy supercapacitors.

Although Ti3C2Tx MXenes have attracted attention in electrochemical energy storage devices due to their excellent electronic conductivity, controllable layer structure, and huge redox active surface area, the application of Ti3C2Tx as supercapacitor (SC) electrode materials is severely limited by the ineffective chemical ion transport kinetics caused by self-restacking. In order to increase the interlayer spacing of Ti3C2Tx, the intercalation method is hailed as an effective process. Herein, polyaniline (PANI) nanorods as intercalators were synthesized by the polymerization of an aniline (ANI) monomer chemisorbed onto Ti3C2Tx wrinkled nanosheets, and the formation of a Ti3C2Tx@PANI heterostructure is conducive to the large interlayer voids. Then, the heterostructure was integrated into a three-dimensional (3D) porous cross-linked framework via a simple graphene oxide (GO)-assisted self-convergence hydrothermal strategy with low temperatures. Due to the synergistic effect among each component and 3D porous interconnected structure, the hierarchical Ti3C2Tx@PANI-reduced graphene oxide (RGO) heterostructure hydrogel possesses the advantages of excellent electrical conductivity, high specific capacitance, repressive aggregation, and large electrochemical active area. Heterostructure hydrogel electrodes (without binders) display excellent electrochemical performance with a specific capacitance as high as 301.0 F g-1 at 1 A g-1, 90.74% capacitance retention over 10 000 cycles, and a maximum energy density of 44.6 W h kg-1 at a power density of 504.7 W kg-1. Our study provides a fresh strategy for constructing a 3D Ti3C2Tx-based framework applicable to other MXenes in the design of hybrid structures for maximizing their potential applications in energy storage.

Spontaneous femoral neck fracture resulting from osteonecrosis involving lateral femoral head-neck junction: a retrospective study.

BACKGROUND: Spontaneous femoral neck fracture is a rare condition that remains controversial due to limited reported cases. This retrospective study aims to provide further insights into the etiology and characteristics of the disease. METHOD: We conducted a retrospective review of data from 963 patients with femoral neck fractures. The data encompassed demographic information, medical histories, radiographic records, bone mineral density (BMD) measurements, and pathological examinations. Patients were categorized into two groups: spontaneous femoral neck fracture (SFF) group (30 cases) and control group (933 cases), based on their medical histories. Logistic regression analysis was employed to identify risk factors for SFF. Statistical analysis was performed to compare and elucidate the characteristics of SFF within each group. RESULTS: Logistic regression analysis revealed osteonecrosis of the femoral head, steroid use, and osteoporosis as three significant risk factors for SFF. Furthermore, a higher proportion of Garden type I and II fractures, as well as Pauwels type I fractures, were observed in the SFF group compared to the control group. Within the SFF group, a higher proportion of patients with osteonecrosis exhibited Garden type III and IV fractures compared to those with osteoporosis. Additionally, both magnetic resonance imaging (MRI) and pathological examinations demonstrated that osteonecrosis in the SFF group predominantly occurred at the lateral femoral head-neck junction. CONCLUSIONS: Osteonecrosis of the femoral head, particularly involving the lateral head-neck junction, was confirmed as a major risk factor for SFF. Furthermore, SFF exhibits internal heterogeneity based on its different causes.

Are There More Radiolucent Lines in Patients Who Underwent Total Knee Arthroplasty With or Without a Tourniquet During Cementation at 5 to 8 Years After Surgery?

BACKGROUND: This study investigated the presence and progression of radiolucent lines (RLLs) after cemented total knee arthroplasty (TKA) with or without tourniquet use. METHODS: There were 369 consecutive primary cemented TKAs with 5 to 8 years of follow-up. A tourniquet was used during component cementation in patients who underwent surgery from January 3, 2006, to March 31, 2010. No tourniquet was used from August 14, 2009, to October 14, 2014. There were 192 patients in the tourniquet group (TQ) and 177 patients in the no tourniquet group (NQ). Patient demographics, reoperations, and complications were recorded. RLLs were identified on anteroposterior, lateral, and skyline x-rays at 1, 2, and 5 to 8 years postoperatively using the modern knee society radiographic evaluation system. Demographics, reoperations, complications, and RLLs were compared. Age, sex, and body mass index were similar between groups. Mean tourniquet time in TQ was 11 minutes (range, 8 to 25). RESULTS: The presence of RLLs differed between groups, with 65% of TQ knees having RLLs under any part of the prostheses versus 46% of NQ knees (P < .001). The progression of RLL >2 mm occurred in 26.0% of knees in TQ and 16.7% of knees in NQ (P = .028). There were 13 TKAs that underwent subsequent revision surgery. There was no statistically or clinically significant difference in revision rate between groups (7 revisions in TQ, 6 in NQ, P = .66). CONCLUSION: Less RLLs were identified in NQ versus TQ. There were no statistically or clinically significant differences in revision rates between the NQ and TQ groups at 5 to 8 years.

Small-Molecule Photoacoustic Imaging Probe with Aggregation-Enhanced Amplitude for Real-Time Visualization of Acute Kidney Injury.

Acute kidney injury (AKI) has become a growing issue for patients with the extensive use of all kinds of drugs in clinic. Photoacoustic (PA) imaging provides a noninvasive and real-time imaging method for studying kidney injury, but it has inherent shortages in terms of high background signal and low detection sensitivity for exogenous imaging agents. Intriguingly, J-aggregation offers to tune the optical properties of the dyes, thus providing a platform for developing new PA probes with desired performance. In this study, a small-molecule PA probe (BDP-3) was designed and synthesized. We serendipitously discovered that BDP-3 can transform into renal clearable nanoaggregates under physiological conditions. The hydrodynamic diameter of the BDP-3 increased from 0.64 ± 0.11 to 3.74 ± 0.39 nm when the content of H2O increased from 40 to 90%. In addition, it was surprising that such a transforming process can significantly enhance its PA amplitude (2.06-fold). On this basis, PA imaging with BDP-3 was applied as a new method for the noninvasive detection of AKI induced by anticancer drugs, traditional Chinese medicine, and clinical contrast agents in animal models and exhibited higher sensitivity than the conventional serum index test, demonstrating great potential for further clinical diagnostic applications.

Abdominal-B contributes to abdominal identity in the brown planthopper, Nilaparvata lugens (Hemiptera: Delphacidae).

The homeotic complex gene Abdominal-B (Abd-B) is involved in regulating the development of posterior abdomens and has been extensively studied in holometabolous insects. However, the function of Abd-B in hemimetabolous insects is not fully understood. Here, we functionally characterize an Abd-B homologue in the brown planthopper (BPH), Nilaparvata lugens. The full-length cDNA of the N. lugens Abd-B homologue (NlAbd-B) is 2334 nt, with an open reading frame of 1113 bp. NlAbd-B has the highest expression level at the egg stage relative to the nymphal and adult stages and is mainly expressed in the fourth to the ninth abdominal segment of embryos. RNA interference (RNAi)-mediated knockdown of NlAbd-B in nymphs disrupted the development of genitalia both in females and males and caused a genitalia-to-leg transformation. Parental RNAi of NlAbd-B in both female and male adults caused an extra abdominal segment in offspring nymphs, while parental RNAi of the N. lugens abdominal-A homologue in both female and males adults led to embryos with leg-like appendages on the second to the eighth abdominal segment. These findings suggest that NlAbd-B plays a pivotal role in genital development and posterior abdominal patterning and thus highlight the conservational role of Abd-B in holometabolous and hemimetabolous insects.

Co-assembly Behaviors of Flavonol Derivatives Induced by a Pyridine Derivative on HOPG via Hydrogen Bonding and Van der Waals Forces.

In this paper, two new flavonol derivatives, 2-(4-(dodecyloxy)phenyl)-3-hydroxyflavone (DHF) and 2-(3,5-bis(dodecyloxy)phenyl)-3-hydroxyflavone (BDHF), were synthesized to investigate the respective self-assembly behaviors at the liquid/solid interface by scanning tunneling microscopy. In addition, a linear pyridine derivative with acetylene groups called BisPy was added to regulate the assembly of DHF and BDHF, individually. However, only BDHF molecules successfully co-assembled into grid structures with BisPy molecules. Furthermore, the assembly and co-assembly behavior mechanism of flavonol derivatives and BisPy molecules were further studied by density functional theory calculations. This work will lay a foundation for investigating the self-assembly of flavonol derivatives and the co-assembly regulated by pyridine derivatives at the liquid-solid interface.

A MRI-based radiomics model predicting radiation-induced temporal lobe injury in nasopharyngeal carcinoma.

OBJECTIVES: To develop and validate a radiomics-based model for predicting radiation-induced temporal lobe injury (RTLI) in nasopharyngeal carcinoma (NPC) by pretreatment MRI of the temporal lobe. METHODS: A total of 216 patients with diagnosed NPC were retrospectively reviewed. Patients were randomly allocated to the training (n = 136) and the validation cohort (n = 80). Radiomics features were extracted from pretreatment contrast-enhanced T1- or fat-suppressed T2 weighted MRI. A radiomics signature was generated by the least absolute shrinkage and selection operator (LASSO) regression algorithm, Pearson correlation analysis, and univariable logistic analysis. Clinical features were selected with logistic regression analysis. Multivariable logistic regression analysis was conducted to develop three models for RTLI prediction in the training cohort: namely radiomics signature, clinical variables, and clinical-radiomics parameters. A radiomics nomogram was used and assessed with respect to calibration, discrimination, reclassification, and clinical application. RESULTS: The radiomics signature, composed of two radiomics features, was significantly associated with RTLI. The proposed radiomics model demonstrated favorable discrimination in both the training (AUC, 0.89) and the validation cohort (AUC, 0.92), outperforming the clinical prediction model (p < 0.05). Combining radiomics and clinical features, higher AUCs were achieved (AUC, 0.93 and 0.95), as well as a better calibration and improved accuracy of the prediction of RTLI. The clinical-radiomics model showed also excellent performance in predicting RTLI in different clinical-pathologic subgroups. CONCLUSION: A radiomics model derived from pretreatment MRI of the temporal lobe showed persuasive performance for predicting radiation-induced temporal lobe injury in nasopharyngeal carcinoma. KEY POINTS: • Radiomics features from pretreatment MRI are associated with radiation-induced temporal lobe injury in nasopharyngeal carcinoma. • The radiomics model shows better predictive performance than a clinical model and was similar to a clinical-radiomics model. • A clinical-radiomics model shows excellent performance in the prediction of radiation-induced temporal lobe injury in different clinical-pathologic subgroups.

Using a machine learning approach to identify key prognostic molecules for esophageal squamous cell carcinoma.

BACKGROUND: A plethora of prognostic biomarkers for esophageal squamous cell carcinoma (ESCC) that have hitherto been reported are challenged with low reproducibility due to high molecular heterogeneity of ESCC. The purpose of this study was to identify the optimal biomarkers for ESCC using machine learning algorithms. METHODS: Biomarkers related to clinical survival, recurrence or therapeutic response of patients with ESCC were determined through literature database searching. Forty-eight biomarkers linked to recurrence or prognosis of ESCC were used to construct a molecular interaction network based on NetBox and then to identify the functional modules. Publicably available mRNA transcriptome data of ESCC downloaded from Gene Expression Omnibus (GEO) and The Cancer Genome Atlas (TCGA) datasets included GSE53625 and TCGA-ESCC. Five machine learning algorithms, including logical regression (LR), support vector machine (SVM), artificial neural network (ANN), random forest (RF) and XGBoost, were used to develop classifiers for prognostic classification for feature selection. The area under ROC curve (AUC) was used to evaluate the performance of the prognostic classifiers. The importances of identified molecules were ranked by their occurrence frequencies in the prognostic classifiers. Kaplan-Meier survival analysis and log-rank test were performed to determine the statistical significance of overall survival. RESULTS: A total of 48 clinically proven molecules associated with ESCC progression were used to construct a molecular interaction network with 3 functional modules comprising 17 component molecules. The 131,071 prognostic classifiers using these 17 molecules were built for each machine learning algorithm. Using the occurrence frequencies in the prognostic classifiers with AUCs greater than the mean value of all 131,071 AUCs to rank importances of these 17 molecules, stratifin encoded by SFN was identified as the optimal prognostic biomarker for ESCC, whose performance was further validated in another 2 independent cohorts. CONCLUSION: The occurrence frequencies across various feature selection approaches reflect the degree of clinical importance and stratifin is an optimal prognostic biomarker for ESCC.

Two insulin receptors determine alternative wing morphs in planthoppers.

Wing polyphenism is an evolutionarily successful feature found in a wide range of insects. Long-winged morphs can fly, which allows them to escape adverse habitats and track changing resources, whereas short-winged morphs are flightless, but usually possess higher fecundity than the winged morphs. Studies on aphids, crickets and planthoppers have revealed that alternative wing morphs develop in response to various environmental cues, and that the response to these cues may be mediated by developmental hormones, although research in this area has yielded equivocal and conflicting results about exactly which hormones are involved. As it stands, the molecular mechanism underlying wing morph determination in insects has remained elusive. Here we show that two insulin receptors in the migratory brown planthopper Nilaparvata lugens, InR1 and InR2, have opposing roles in controlling long wing versus short wing development by regulating the activity of the forkhead transcription factor Foxo. InR1, acting via the phosphatidylinositol-3-OH kinase (PI(3)K)-protein kinase B (Akt) signalling cascade, leads to the long-winged morph if active and the short-winged morph if inactive. InR2, by contrast, functions as a negative regulator of the InR1-PI(3)K-Akt pathway: suppression of InR2 results in development of the long-winged morph. The brain-secreted ligand Ilp3 triggers development of long-winged morphs. Our findings provide the first evidence of a molecular basis for the regulation of wing polyphenism in insects, and they are also the first demonstration--to our knowledge--of binary control over alternative developmental outcomes, and thus deepen our understanding of the development and evolution of phenotypic plasticity.

A genome-wide identification and analysis of the homeobox genes in the brown planthopper, Nilaparvata lugens (Hemiptera: Delphacidae).

The homeobox family is a large and diverse superclass of genes, many of which act as transcription factors that play important roles in tissue differentiation and embryogenesis in animals. The brown planthopper (BPH), Nilaparvata lugens, is the most destructive pest of rice in Asia, and high fecundity contributes significantly to its ecological success in natural and agricultural habits. Here, we identified 94 homeobox genes in BPH, which could be divided into 75 gene families and 9 classes. This number is comparable to the number of homeobox genes found in the honeybee Apis mellifera, but is slightly less than in Drosophila or the red flour beetle Tribolium castaneum. A spatio-temporal analysis indicated that most BPH homeobox genes were expressed in a development and tissue-specific manner, of which 21 genes were highly expressed in ovaries. RNA interference (RNAi)-mediated functional assay showed that 22 homeobox genes were important for nymph development and the nymph to adult transition, whereas 67 genes were dispensable during this process. Fecundity assay showed that knockdown of 13 ovary-biased genes (zfh1, schlank, abd-A, Lim3_2, Lmxb, Prop, ap_1, Not, lab, Hmx, vis, Pknox, and C15) led to the reproductive defect. This is the first comprehensive investigation into homeobox genes in a hemipteran insect and thus helps us to understand the functional significance of homeobox genes in insect reproduction.

Solvent-Dependent Self-Assemblies and Pyridine Modulation of a Porphyrin Molecule at Liquid/Solid Interfaces.

On the highly oriented pyrolytic graphite (HOPG) surface, a new porphyrin molecule MT-4 containing a porphine core with six alkyl chains and two carboxyl groups has been explored using scanning tunneling microscopy (STM) technology. Solvent and pyridine regulation have been proved to be two effective ways to control and tune the supramolecular structure of MT-4 at interfaces. Different high-resolution STM (HR-STM) images with highly ordered and closely packed arrangements were gained at the corresponding liquid-solid interface, including phenyl octane (PO), 1-heptanoic acid (HA), and 1-hexanol. Except for the solvent effect, introducing pyridine derivatives such as 4,4'-vinylenedipyridine (DPE) and 4,4'-((1E,1'E)-(2,5-bis(octyloxy)-1,4-phenylene) bis(ethene-2,1-diyl)) dipyridine (PEBP-C8) is also effective to modulate the self-assembly of MT-4. With careful analysis of the STM pictures and the density functional theory (DFT) computational exploration, we figured out the molecular model, interaction energies, and self-assembly mechanism of each system at the interface. This work provides a simple and effective approach for quickly building diverse nanoarchitectures by utilizing different noncovalent interactions. Meanwhile, it would give a perspective to regulate and control self-assembly arrays for devising novel molecular-based materials through more optimal strategies.

Solvent-Dependent Core-Modified Rubyrin Self-Assembly at Liquid/Solid Interfaces.

Scanning tunneling microscopy (STM) was utilized to disclose four novel core-modified rubyrin self-assembly behaviors on the highly-oriented pyrolytic graphite (HOPG) surface, of which N2S4-OR(1)/N2Se4-OR(2) had no phenanthrene pyrrole ring and N2S4-OR(3)/N2Se4-OR(4) had phenanthrene-fused pyrrole rings and meso-aryl substituents. It was discovered that the core-modified rubyrin could self-assemble into either face-on or edge-on monolayer structures selectively at the liquid/HOPG interface in different solvents. There was an obvious solvent-dependent self-assembly for N2S4-OR(3)/N2Se4-OR(4), which adopted an edge-on and face-on structure in 1-phenyloctane and 1-heptanoic acid solvents, respectively, whereas N2S4-OR(1)/N2Se4-OR(2) showed no obvious difference in the assembly structure, which both adopted a face-on structure in the two solvents. Density functional theory (DFT) calculations were also utilized to reveal the relevant self-assembly mechanisms. This study shows a typical solvent effect regulating core-modified rubyrin self-assembly, which is essential for porphyrin-based functional devices' design and manufacture.

Understanding of Dynamic Contacting Behaviors of Underwater Gas Bubbles on Solid Surfaces.

Understanding of dynamic behaviors of gas bubbles on solid surfaces has significant impacts on gas-involving electrochemical reactions, mineral flotation, and so on in industry. Contact angle (θ) is widely employed to characterize the wetting behaviors of bubbles on solid surfaces; however, it usually fluctuates within the bubble's advancing (θa) and receding (θr) range. Although the term of most-stable contact angle (θms) was defined previously as the closest valuable approximation for thermodynamically meaningful contact angle for a droplet on a solid surface, it has not been widely studied; and the precise θms measurement methods are inadequate to describe bubbles' wetting behaviors on solid surfaces. Herein, we proposed to take θms as the mean value of θa and θr, as a more accurate descriptor of gas bubbles' dynamic behaviors on nonideal solid surfaces, similar to the definition of droplets' θms on solid surfaces. The feasibility and accuracy of the proposed θms have been evidenced by recording the bubbles' contacting behaviors on solid surfaces with varied wettabilities. In addition, it was found that the contact angle hysteresis (δ), as the difference between θa and θr, reached its maximum value when θms approached 90°, regardless of the roughness (r) of the substrates. Finally, built on the above concept, the lateral adhesion force (f) of the gas bubble on the solid interface, which worked on the three-phase contact line (TPCL) of an individual bubble on a solid surface against its lateral motion during the bubble advancing or receding process, was described quantitatively by combining θa, θr, and the liquid-gas interfacial tension (γlg). Experimental and theoretical data jointly confirmed that f reached its maximum value at θms ∼ 90°, namely, a "super-sticky" state, which described the dynamically most sluggish movement of the bubble along the solid surface.