RESUMO
Traditional fluorescent anti-counterfeiting labels based on "on-off" fluorescence can be easily cloned. It is important to explore advanced anti-counterfeiting fluorescent labels with high-level security. Here, a pioneering ion species- and ion concentration-dependent anti-counterfeiting technique is developed. By successive loading Cu2+ -sensitive yellow emitted carbon dots (Y-CDs) and Cu2+ non-sensitive blue emitted carbon dots (B-CDs) into metal-organic frameworks (MOFs) and followed by electrospinning, the B&Y-CDs@MOF-nanofibrous films are prepared. The results show that the use of MOF not only avoids the fluorescence quenching of CDs but also improves the fluorescence stability. The fluorescence Cu2+ -sensitivity of the CDs@MOF-nanofibrous films can be regulated by polymer coating or lamination. The fluorescent label consisting of different Cu2+ -sensitivity films will show Cu2+ concentration-dependent decryption information. Only at a specific ion species and concentration (Cu2+ solution of 40-90 µm), the true information can be read out. Less or more concentration (<40 or >90 µm) will lead to false information. The identification of the real information depends on both the species and the concentration. After Cu2+ treatment, the fluorescence of the label can be recovered by ethylenediaminetetraacetic acid disodium (EDTA-2Na) for further recycling. This work will open up a new door for designing high-level fluorescent anti-counterfeiting labels.
RESUMO
Liquid silicon-based carbon dots (CDs) with a photoluminescence quantum yield (PLQY) of 50% were prepared using N-[3-(trimethoxysilyl)propyl]ethylenediamine (DAMO), citric acid, and n-butylamine as raw materials. Firstly, the optimized characters have been determined, namely, the optimal DAMO, citric acid, and n-butylamine addition amounts of 1 mL, 0.9 g, and 1 mL, a reaction time of 3 h, and a reaction temperature of 160°C. Further research has confirmed that the increase in fluorescence intensity of CDs is mainly due to the introduction of DAMO, in which the two amino groups in DAMO play a major role. In addition, the Si-O-Si group generated by the hydrolysis of siloxane groups is connected to the surface of the CDs and forms a core-shell structure, which modifies the defects on the surface and enhances the fluorescence intensity of the CDs. Finally, luminescent solar concentrators (LSCs) based on liquid silicon-based CDs were assembled by spin coating. The obtained device has a transparency of up to 80% and an optical efficiency of 2.4%.
Assuntos
Carbono , Luminescência , Pontos Quânticos , Silício , Silício/química , Carbono/química , Pontos Quânticos/química , Energia Solar , Medições LuminescentesRESUMO
With the development of intellectual properties, concern about advanced anti-counterfeiting is accumulating, which conventional single-modal luminescence can no longer satisfy. As one of rapidly developing 0D materials, copper-based perovskite shows great potential to realize multiple luminescent centers for complex emissions. In this work, Cd was doped into Cs3 Cu2 I5 and showed resultant emission at 560â nm which surprisingly showed a red-shifted excitation peak from that of intrinsic self-trapped emission, resulting in excitation-wavelength dependent emission. When the excitation wavelength increased from 290â nm to 330â nm, the emission of Cd-doped Cs3 Cu2 I5 changed from deep blue to cold white and finally yellow. Afterwards, Cd-doped Cs3 Cu2 I5 was mixed with polystyrene to prepare anti-counterfeiting ink for silk-screen printing. Meanwhile, Cd-doped Cs3 Cu2 I5 maintains outstanding stability after doping, no matter under ambient, continuous UV radiation or high-temperature environment. The intensity can be almost totally recovered after heating-and-cooling cycles. This study lays groundwork for future research into multiple luminescent center manipulation in 0D materials.
RESUMO
During the fabrication of lateral-structured photodetectors based on CH3 NH3 PbI3 film, antisolvents represented by toluene are usually used to accelerate the crystallization of perovskite. Using antisolvent not only leads to the formation of shrinkage holes at the bottom of the perovskite layer, but the toxicity of antisolvents would also hinder the industrial preparation of perovskite devices. An antisolvent-free method is a possible solution to avoid these problems. Here, we report a lateral-structured photodetector based on an antisolvent-free method. The lateral photodetector exhibited a high responsivity of 1.75 Aâ W-1 and specific detectivity (D*) of 3.54 × 1012 Jones. In particular, the results indicated that the solvent had an influence on perovskite film morphology, crystallization, and device performance. The prepared CH3 NH3 PbI3 film presented needle-like crystals and low performance with single precursor solvent N,N-dimethylformamide (DMF). In comparison, appropriate mixing of dimethyl sulfoxide (DMSO) could improve the morphology, crystallization, and performance of the film. In addition, the solvent volume ratio of the precursor had a profound effect on the performance of the as-prepared photodetectors. At a DMSO:DMF volume ratio of 5:5, the as-prepared film had massive perovskite crystals and fewer defects, resulting in optimal device performance, which can be explained by Urbach energy.
RESUMO
Traffic-related air pollution (TRAP) was monitored using a mobile sensor network on 125 urban taxis in Shanghai (November 2019/December 2020), which provide real-time patterns of air pollution at high spatial resolution. Each device determined concentrations of carbon monoxide (CO), nitrogen dioxide (NO2), and PM2.5, which characterised spatial and temporal patterns of on-road pollutants. A total of 80% road coverage (motorways, trunk, primary, and secondary roads) required 80-100 taxis, but only 25 on trunk roads. Higher CO concentrations were observed in the urban centre, NO2 higher in motorway concentrations, and PM2.5 lower in the west away from the city centre. During the COVID-19 lockdown, concentrations of CO, NO2, and PM2.5 in Shanghai decreased by 32, 31 and 41%, compared with the previous period. Local contribution related to traffic emissions changed slightly before and after COVID-19 restrictions, while changing background contributions relate to seasonal variation. Mobile networks are a real-time tool for air quality monitoring, with high spatial resolution (~200 m) and robust against the loss of individual devices.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , COVID-19 , Poluentes Atmosféricos/análise , Poluição do Ar/análise , COVID-19/epidemiologia , China , Controle de Doenças Transmissíveis , Monitoramento Ambiental , Humanos , Dióxido de Nitrogênio/análise , Material Particulado/análiseRESUMO
Precise control of the structure and bonds of doped carbon dots (CDs) is important, so that their fluorescence can be tuned as desired. Up until now, there has been a lack of effective ways to control the bonds of doped CDs. In this article, we show that the fluorescence of B/N-doped carbon dots (B/N-CDs) can be precisely tuned just by controlling their precursors' pH values. The prepared B/N-CDs exhibit two emission bands, including one emission peak at around 450 nm due to the defect state caused by low sp2 hybridization of carbon atoms, as well as another emission peak at around 360 nm caused by the B-N bond. The results for the ratio of the maximum intensity of the two emission peaks above show a linear relationship. Meanwhile, the role of the pH value of the precursors on the luminescence of B/N-CDs is deeply studied. On the one hand, the pH value affects the bonding process of CDs. N-H bonds tend to form at a low pH value, while more competitive B-N bonds exist at much higher pH value, leading to the pH-dependent intensity of the 360 nm emission band. On the other hand, a high pH value causes higher crystallinity, thus suppressing defect-state fluorescence at 450 nm. The dual effects of pH lead to precisely controlled dual-emission intensities as well as ratiometric fluorescence.
RESUMO
Large-size luminescent solar concentrators (LSCs), which act as a complement to silicon-based photovoltaic (Si-PV) systems, still suffer from low power conversion efficiency (PCE). How to improve the performance of LSCs, especially large ones, is currently a hot research topic. Traditional LSCs have only a single transmission mode of fluorescence from the luminescent materials to the Si-PV, but here we introduce a new idea to improve the absorption of Si-PV by employing dual transmission modes of both fluorescence and scattering light. To prepare LSCs with dual mode transmission, Si-PV systems are coupled around the edges of a light-harvesting slice, which is prepared by ultraviolet light-induced polymerization of methyl methacrylate (MMA) solution containing both luminescent CsPbBr3 and TiO2 nanocrystals (NCs). When the sun light or incident light is coupled into the light-harvesting slice, CsPbBr3 NCs can convert the incident light into fluorescence, and then partly transmit to Si-PV at the edges, where the light is finally converted into electrical energy. Besides the traditional fluorescence transmission mode, the addition of TiO2 brings another transmission mode, namely the scattering of incident light to Si-PV, leading to an increase in PCE. In comparison to that of pure CsPbBr3-based LSCs without the addition of TiO2 (0.97%), the PCE of TiO2-doped LSCs with a large size of 20 cm × 20 cm is improved to 1.82%. The maximal PCE appears for LSCs with a size of 5 cm × 5 cm, reaching 2.62%. The reported method of dual transmission modes is a new alternative way to improve the performance of LSC devices, which does not need to change the optical properties of luminescent materials. Moreover, the production process is simple, low-cost and suitable for preparing large area LSCs, further promoting the application of LSCs.
RESUMO
The emission wavelength of organic-inorganic hybrid perovskite quantum dots (QDs) can be tuned by controlling reaction time relevant to the halide exchange. It is because halide exchange with different time would lead to different molar ratio of halides in perovskite QDs such as Cl and Br. Here, to research the ligand's effect on the halide exchange, this work synthesized 3-mercaptopropionic acid (MPA)-capped CH3 NH3 PbBrx Cl3-x QDs. It was found that SH- of MPA appeared to inhibit the halide exchange during the reation. Moreover, although the MPA-capped CH3 NH3 PbBrx Cl3-x QDs did not contain the chiral centre, they exhibit the optical rotation. This may provide a method for chirality manipulation of perovskite.
Assuntos
Ácido 3-Mercaptopropiônico/química , Compostos de Cálcio/química , Óxidos/química , Pontos Quânticos/química , Titânio/química , Estrutura Molecular , Fenômenos Ópticos , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
BACKGROUND: Diet-related cardiovascular diseases have produced a large health burden in China. Coal miners are a high-risk population for cardiovascular disease, but there is little evidence concerning associations between coal miners' dietary patterns and their 10-year cardiovascular disease risk score levels. METHODS: The study included 2632 participants and focused on dietary patterns associated with higher 10-year cardiovascular disease risk score levels. A valid semi-quantitative food frequency questionnaire was used to collect data regarding dietary intake, and dietary patterns were identified using factor analysis combined with cluster analysis. Logistic regression was used to assess associations between dietary patterns and 10-year cardiovascular disease risk score levels. RESULTS: For ground workers, compared with the 'Healthy' pattern, the 'High-salt' and 'Refined grains' patterns were significantly associated with higher 10-year atherosclerotic cardiovascular disease risk score level (OR: 1.50, 95% CI: 1.02-2.21; OR: 1.92, 95% CI: 1.26-2.93) and 10-year ischemic cardiovascular disease risk score level (OR: 2.18, 95% CI: 1.25-3.80; OR: 2.64, 95% CI: 1.48-4.72) adjusted for gender, and behavioural and socioeconomic factors. The 'High-fat and salt' pattern was significantly associated with higher 10-year ischemic cardiovascular disease risk score level (OR: 1.97, 95% CI: 1.13-3.42). For underground workers, the 'High-salt' pattern was significantly associated with higher 10-year atherosclerotic cardiovascular disease risk score level (OR: 1.65, 95% CI: 1.16-2.36) and 10-year ischemic cardiovascular disease risk score level (OR: 1.76, 95% CI: 1.09-2.84). CONCLUSIONS: This study provides evidence for dietary patterns associated with higher 10-year cardiovascular disease risk score levels in Chinese miners, and facilitates relevant departments in designing effective dietary guidelines to ameliorate dietary structures.
Assuntos
Doenças Cardiovasculares/epidemiologia , Carvão Mineral , Dieta/efeitos adversos , Comportamento Alimentar , Mineradores/psicologia , Adulto , China/epidemiologia , Estudos Transversais , Análise Fatorial , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Mineradores/estatística & dados numéricos , Medição de RiscoRESUMO
Diabetic cardiomyopathy (DCM) is one of the chief diabetes mellitus complications. Inflammation factors may be one reason for the damage from DM. The purpose of this research is to study the potential protective effects of puerarin on DM and the possible mechanisms of action related to NF-κB signal pathway. Following administration of puerarin to the disease model rat, several changes were observed including the changes of serum biochemical index, improved diastolic dysfunction, and enhanced endogenous antioxidant enzymes activities, further NF-κB signaling activation. Puerarin showed cardio-protective effects on DCM by inhibiting inflammation, and it might be a potential candidate for the treatment of DCM.
Assuntos
Diabetes Mellitus Experimental/complicações , Cardiomiopatias Diabéticas/prevenção & controle , Inflamação/tratamento farmacológico , Isoflavonas/farmacologia , Animais , Linhagem Celular , Células Cultivadas , Glucose/toxicidade , Isoflavonas/química , Estrutura Molecular , Mioblastos Cardíacos/efeitos dos fármacos , Miocárdio/citologia , NF-kappa B , Ratos , Ratos Sprague-Dawley , Transdução de Sinais/efeitos dos fármacosRESUMO
CH3NH3PbBr3 perovskite nanocrystals (NCs) suffer from poor stability because of their high sensitivity to environmental moisture and water. To solve this problem, previous works mainly focus on embedding perovskite NCs into water-resistant matrix to form large composites (size of microns or larger). As an alternative solution without serious changing of NC size, enhancing the stability of perovskite NCs themselves by ligand engineering is rarely reported. In this work, we used hyperbranched polyamidoamine (PAMAM) dendrimers with two different generations (G0 and G4) to synthesize CH3NH3PbBr3 perovskite NCs with high photoluminescence (PL) quantum yields (QY) above 70% and a new record stability. A novel dendrimers generation-dependent stability of perovskite NCs was observed. The water-resistance time is 18 h (27 h) for perovskite NCs capped by G0 (G4) generation of PAMAM, which is 7 times (11 times) longer than that of traditional oleic acid-capped NCs. Similar PAMAM generation-related stability is also observed in moisture-resistance tests. The stability time against moisture is 500 h (800 h) for G0 (G4) generation of PAMAM-capped perovskite NCs, which is a new record stability time against moisture for CH3NH3PbBr3 perovskite NCs. In addition, our results also indicate that PAMAM ligands outside perovskite NCs can dramatically slow down the speed of halide exchange. Even for the mixture of perovskite NCs with two different halide composition, the original luminescence properties of PAMAM-capped perovskite NCs can retain after mixing. In view of slow halide exchange speed, excellent water and moisture stability, PAMAM dendrimers-capped perovskite NCs and their mixture are available as color conversion single layer in fabrication of light-emitting diodes (LED).
RESUMO
Two novel anaerobic, mesophilic, biohydrogen-producing bacteria, designated strains ZGM211T and G1T, were isolated from lake sediment. 16S rRNA and ATP synthase beta subunit (atpD) gene sequences and phylogenetic analysis of strains ZGM211T and G1T revealed an affiliation to the genus Clostridium sensu stricto (cluster I of the clostridia), with Clostridium acetobutylicum as the closest characterized species, showing the same sequence similarity of 96.4â% to the type strain (98.9â% between the two isolates). Cells of the two strains were rod shaped. Growth occurred at 20-45 °C, pH 4.0-8.0 and NaCl concentrations up to 2â% (w/v). Grown on glucose, the main fermentation products were H2, CO2, acetate and butyrate. The major fatty acids were C14â:â0 and C16â:â0. The DNA G+C contents of strains ZGM211T and G1T were 40.7 and 41.5 mol%, respectively. Based on phenotypic, chemotaxonomic and phylogenetic differences, strains ZGM211T (=CICC 24070T=BCRC 80950T) and G1T (=CICC 24069T=BCRC 80949T) are proposed as the type strains of novel species of the genus Clostridium with the names Clostridium guangxiense sp. nov. and Clostridium neuense sp. nov., respectively.
Assuntos
Clostridium/classificação , Lagos/química , Filogenia , Bactérias Anaeróbias/classificação , Bactérias Anaeróbias/genética , Bactérias Anaeróbias/isolamento & purificação , Técnicas de Tipagem Bacteriana , Composição de Bases , China , Clostridium/genética , Clostridium/isolamento & purificação , DNA Bacteriano/genética , Ácidos Graxos/química , Fermentação , Sedimentos Geológicos/microbiologia , Hidrogênio/metabolismo , Fosfolipídeos/química , RNA Ribossômico 16S/genética , Análise de Sequência de DNARESUMO
In this work, highly luminescent quaternary CuNiInS nanocrystals (NCs) are put forward as a good prototype for investigating defect-induced room temperature ferromagnetism. A ferromagnetic Ni cation can preserve the strong luminescence of NCs without introducing intermediate energy levels in the center of the forbidden band. The strong luminescence of NCs is used as an indicator for monitoring the concentration of vacancy defects inside them, facilitating the investigation of the origin of room temperature ferromagnetism in CuNiInS NCs. Our results reveal that the patching of Cu vacancies [Formula: see text] with Ni will result in bound magnetic polarons composed of both [Formula: see text] and a substitution of Cu by Ni [Formula: see text] giving rise to the room temperature ferromagnetism of CuNiInS NCs. Either the ferromagnetic Ni or the non-ferromagnetic Cu cation can tune the magnetism of CuNiInS NCs because of the change of bound magnetic polaron concentration at the altered concentration ratio of [Formula: see text] and [Formula: see text].
RESUMO
Cu,Mn:ZnSe quantum dots (QDs) of tunable size, controllable photoluminescence (PL) intensity ratio and PL range were prepared. A study of the experimental conditions confirmed that the size of Cu,Mn:ZnSe QDs is affected by the pH of the solution, the speed at which the Zn solution is injected and the reaction temperature. In general, high pH, low injection speed and high reaction temperature are optimal for preparing large QDs. Based on this knowledge, different sizes of Cu,Mn:ZnSe QDs were synthesized. Moreover, white emission Cu,Mn:ZnSe QDs were designed by controlling the experimental conditions and the feeding mole ratio of Mn:Cu.
Assuntos
Cobre/química , Manganês/química , Pontos Quânticos/química , Compostos de Selênio/química , Compostos de Zinco/química , Concentração de Íons de Hidrogênio , Luminescência , Microscopia Eletrônica de Transmissão , Tamanho da Partícula , Espectrofotometria Ultravioleta , Temperatura , Difração de Raios XRESUMO
OBJECTIVE: This study aimed to investigate the relationship between metabolic syndrome (MetS) and physical activity (PA) in different domains among male coal miners of Shanxi Province in China. METHOD: The study was conducted from July 2013 to December 2013. A two-stage stratified cluster sampling method was used. Data regarding the general information of participants were collected by well-trained interviewers. MetS was defined according to IDF criteria. Self-reported PA was obtained with the IPAQ and categorized into three tertiles of intensity levels across occupation, transportation, household, and leisure-time domains. Univariate and multiple logistic regression analysis were applied to compute the odds ratios and their 95% confidence interval (CI). RESULTS: A total of 3076 males aged 18-65 years old were recruited in this cross-sectional study. The prevalence of MetS was 40.5% in the study subjects. The percentages of vigorous-intensity PA in MetS and non-MetS groups were 70.07% and 62.92%, respectively. Participants spent most of their time on occupation (2034 MET-min/w) and transportation (693MET-min/w) domains. Higher-intensity levels in occupation domains were significantly associated with lower risk of MetS (OR: 0.759, 95% CI: 0.633-0.911; OR: 0.627, 95% CI: 0.516-0.762). CONCLUSIONS: Across four types of workers, the relationships between PA domains and MetS were different. For underground and underground auxiliary workers, the negative relationship was found between occupation PA and MetS. For office workers, the negative relationship was found between household PA and MetS. For ground workers, only leisure-time PA had positively related to MetS.
Assuntos
Exercício Físico , Síndrome Metabólica/epidemiologia , Mineradores , Adolescente , Adulto , Idoso , China , Análise por Conglomerados , Minas de Carvão , Estudos Transversais , Humanos , Masculino , Síndrome Metabólica/diagnóstico , Pessoa de Meia-Idade , Prevalência , Fatores de Risco , Tamanho da Amostra , Fatores Socioeconômicos , Inquéritos e Questionários , Adulto JovemRESUMO
Black phosphorus quantum dots (BPQDs) have been prepared by a high turbulent shear rate generated from a household kitchen blender. A layer-by-layer disintegration mechanism of bulk BP crystals is suggested. As-synthesized BPQDs have shown excellent humidity sensing and photothermal converting properties. Importantly, this work not only explores potential applications for the BPQDs but also provides a successful paradigm for preparing the QDs of other layered materials.
RESUMO
In this work, we used Ag- and Mn-doped ZnInS/ZnS quantum dots (QDs) acting as a new generation of nontoxic dual-emission QDs with simultaneous tunable emission wavelengths and dual-emission ratiometric, which makes nontoxic dual-emission QDs with broad zone tunability in the color coordinate. The Ag-doped ZnInS ternary QDs can give rise to largely tunable emission wavelengths from 497 nm to 631 nm. The ratiometric of Ag and Mn dual emissions can be tuned by controlling AgMn and MnMn dopant coupling. With increased Mn doping amount, the increased AgMn dopant coupling leads to increased Mn emission at the expense of lowered Ag emission and Ag fluorescence lifetime. The MnMn coupling can be controlled by using different doping manners: co-doping Ag and Mn in ZnInS core or separate-doping Ag in ZnInS core and Mn in ZnS shell. Compared with co-doping, separate doping has weaker MnMn interactions, an increased Mn irradiative recombination rate constant, and bright Mn photoluminescence.
RESUMO
Stable photoluminescence QD light-emitting diodes (QD-LEDs) were made based on hydrophilic CdTe quantum dots (QDs). A quantum dot-inorganic nanocomposite (hydrophilic CdTe QDs incorporating dehydrated silica gel) was prepared by two methods (rotary evaporation and freeze drying). Taking advantage of its viscosity, plasticity and transparency, dehydrated silica gel could be coated on the surface of ultraviolet (UV) light LEDs to make photoluminescence QD-LEDs. This new photoluminescence QD-LED, which is stable, environmentally non-toxic, easy to operate and low cost, could expand the applications of hydrophilic CdTe QDs in photoluminescence.
Assuntos
Compostos de Cádmio/química , Luz , Pontos Quânticos/química , Dióxido de Silício/química , Telúrio/química , Géis , Interações Hidrofóbicas e Hidrofílicas , Luminescência , Processos FotoquímicosRESUMO
The optical and bonding characteristics of doping ZnSe quantum dots (QDs) were investigated. Cd-, Mn-, Ag- and Cu-doped ZnSe were synthesized in aqueous solution. Theoretically, the intensity of the Cd-Se bond was similar to that of the Zn-Se bond, which illustrates that Cd can be doped into ZnSe materials at any ratio. We found that Mn-Se bonding was stronger than Zn-Se bonding. Ag-doped ZnSe nanoclusters show the same bonding and configuration as Cu-doped ZnSe. Moreover, Cd can be doped into ZnSe using both the substitution- and vacancy-doping method. For Mn-doped ZnSe clusters, small amounts of Mn impurity lead to stronger bonding with Se, but larger amounts of Mn impurity led to the formation of a Mn-Mn metal bond. The theoretical results show that it is difficult to form a vacancy-doping cluster for Mn-doped ZnSe materials. In experiments, the absorption and photoluminescence (PL) spectral wavelengths of Mn-doped ZnSe nanocrystals were the same as those of pure ZnSe nanocrystals, showing that the Mn impurity is not doped into ZnSe nanocrystals. Ag- and Cu-doped ZnSe nanocrystals have the same PL characteristics. The doping of an impurity is related to the solubility product, and not the bonding intensity.
Assuntos
Pontos Quânticos , Teoria Quântica , Compostos de Selênio/química , Compostos de Zinco/química , Cádmio/química , Cobre/química , Manganês/química , Fenômenos Ópticos , Prata/químicaRESUMO
We propose to further research the protective effect of MMI on myocardium ischemic rat model and H9c2 cells that underwent cell apoptosis induced by hypoxia. We established the myocardium ischemic rat model via the cardiac surgical procedures in vivo and treated the model rats with different concentration of MMI. In vitro, with the pretreatment of MMI for 12 h in the model of Na2S2O4-induced hypoxia injury, the H9c2 cells viability was determined by MTT assay. We found that MMI had significantly improved cardiac function of the myocardial ischemia, and significantly decreased the reactive oxygen species level. The expression of P53, Bcl-2, Bax, and caspase-9 was also induced by MMI. In vitro study revealed a concentration-dependent increase in cell viability associated with MMI pretreatment. Annexin V-FITC and PI staining results showed that MMI had a preventive effect on hypoxia-induced apoptosis in H9c2 cells. MMI also inhibited the mitochondrial membrane potential decrease and increased total ATPase activity during hypoxia in H9c2 cells. In conclusion, MMI can enhance the cardiac function in myocardial ischemic rat and increase cell viability and attenuate the apoptosis in H9c2 cells induced by hypoxia, which was associated with inhibiting MMP decreasion and increasing total ATPase activity.