RESUMO
In this paper, rigid polyurethane foams that were filled with expandable graphite (RPUF/EG) composites were prepared by the liquid blending method, and then the structure and flame retardancy performance of materials were investigated through optical microscope, scanning electron microscope, limit oxygen index, cone calorimeter, thermogravimetric analysis coupled to fourier transform infrared spectrum, and X-ray photoelectron spectroscopy. The results showed that a large number of EG could be good to the exhibition of flame retardancy of RPUF, where the optimal material was found at loading 15 phr EG that showed an increased limit oxygen index value and a decreased calorific or fuming value. TGA coupled FTIR and XPS revealed that EG could disassembled before RPUF under heating treatment, and it could form a pyknotic and enahnced residual carbon layer on RPUF surface after the fire, which restricted the transfer of gas, like oxygen or heat into PU matrix, finally resulting in the promotion of flame retardancy of RPUF.
RESUMO
The present study aims to improve the mechanical properties of epoxy composite by incorporating supported ionic liquid silica (IL-silica). The IL-silica not only showed improved interfacial interaction and reinforcement, but also served as cure agent of epoxy composites. The differential scanning calorimetry analysis revealed that epoxy composites could be successfully cured with IL-silica without any routine curing agents. IL-silica/epoxy composites presented higher mechanical and thermal properties compared with epoxy composite containing un-functionalized silica (u-silica). The dynamic mechanical analysis showed that the storage modulus of composites significantly increased with the addition of IL-silica in comparison to that with added u-silica, as well as the variation of Tg parameter. The incorporation of IL-silica simultaneously enhanced the tensile strength, toughness, and thermal stability of the epoxy composites. The considerable improvements in mechanical and thermal properties are ascribed to the improved dispersion of IL-silica and the enhanced interfacial interactions between epoxy matrix and IL-silica by strong covalent bonding, which results in an effective load transfer.