Metal Halide Nanocrystals@Silica Aerogel Composite with Enhanced Dispersion Stability and Light Output for Efficient X-Ray Imaging in Harsh Environment.

Metal halide nanocrystals (MHNCs) embedded in a polymer matrix as flexible X-ray detector screens is an effective strategy with the advantages of low cost, facile preparation, and large area flexibility. However, MHNCs easily aggregate during preparation, recombination, under mechanical force, storage, or high operating temperature. Meanwhile, it shows an unmatched refractive index with polymer, resulting in low light yield. The related stability and properties of the device remain a huge unrevealed challenge. Herein, a composite screen (CZBM@AG-PS) by integrating MHNCs (Cs2ZnBr4: Mn2+ as an example) into silica aerogel (AG) and embedded in polystyrene (PS) is successfully developed. Further characterization points to the high porosity AG template that can effectively improve the dispersion of MHNCs in polymer detector screens, essentially decreasing nonradiative transition, Rayleigh scattering, and performance aging induced by aggregation in harsh environments. Furthermore, the higher light output and lower optical crosstalk are also achieved by a novel light propagation path based on the MHNCs/AG and AG/PS interfaces. Finally, the optimized CZBM@AG-PS screen shows much enhanced light yield, spatial resolution, and temperature stability. Significantly, the strategy is proven universal by the performance tests of other MHNCs embedded composite films for ultra-stable and efficient X-ray imaging.

Organic Cation Modulation in Manganese Halides to Optimize Crystallization Process and X-Ray Response Toward Large-Area Scintillator Screen.

Manganese halides are one of the most potential candidates for large-area flat-panel detection owing to their biological safety and all-solution preparation. However, reducing photon scattering and enhancing the efficient luminescence of scintillator screens remains a challenge due to their uncontrollable crystallization and serious nonradiative recombination. Herein, an organic cation modulation is reported to control the crystallization process and enhance the luminescence properties of manganese halides. Given the industrial requirements of the X-ray flat-panel detector, the large-area A2MnBr4 screen (900 cm2) with excellent uniformity is blade-coated at 60 °C. Theoretical calculations and in situ measurements reveal that organic cations with larger steric hindrance can slow down the crystallization of the screen, thus neatening the crystal arrangement and reducing the photon scattering. Moreover, larger steric hindrance can also endow the material with higher exciton binding energy, which is beneficial for restraining nonradiative recombination. Therefore, the BPP2MnBr4 (BPP = C25H22P+) screen with larger steric hindrance exhibits a superior spatial resolution (>20 lp mm-1) and ultra-low detection limit (< 250 nGyair s-1). This is the first time steric hindrance modulation is used in blade-coated scintillator screens, and it believes this study will provide some guidance for the development of high-performance manganese halide scintillators.

Hydrogen Bonds Strengthened Metal-Free Perovskite for Degradable X-ray Detector with Enhanced Stability, Flexibility and Sensitivity.

Metal-free perovskites (MFPs) with flexible and degradable properties have been adopted in flexible X-ray detection. For now, figuring out the key factors between structure and device performance are critical to guide the design of MFPs. Herein, MPAZE-NH4 I3 ⋅ H2 O was first designed and synthesized with improved structural stability and device performance. Through theoretical calculations, the introducing methyl group benefits modulating tolerance factor, increases dipole moment and strengthens hydrogen bonds. Meanwhile, H2 O increases the hydrogen bond formation sites and synergistically realizes the band nature modulation, ionic migration inhibition and structural stiffness optimization. Spectra analysis also proves that the improved electron-phonon coupling and carrier recombination lifetime contribute to enhanced performance. Finally, a flexible and degradable X-ray detector was fabricated with the highest sensitivity of 740.8 µC Gyair -1 cm-2 and low detection limit (0.14 nGyair s-1 ).

Origin, Influence, and Countermeasures of Defects in Perovskite Solar Cells.

Defects are considered to be one of the most significant factors that compromise the power conversion efficiencies and long-term stability of perovskite solar cells. Therefore, it is urgent to have a profound understanding of their formation and influence mechanism, so as to take corresponding measures to suppress or even completely eliminate their adverse effects on device performance. Herein, the possible origins of the defects in metal halide perovskite films and their impacts on the device performance are analyzed, and then various methods to reduce defect density are introduced in detail. Starting from the internal and interfacial aspects of the metal halide perovskite films, several ways to improve device performance and long-term stability including additive engineering, surface passivation, and other physical treatments (annealing engineering), etc., are further elaborated. Finally, the further understanding of defects and the development trend of passivation strategies are prospected.

Tailoring Multi-Phenyl Ring Cation for Stable Scalable Hybrid Bismuth Iodide Amorphous Film: Enabling Record Sensitivity and High-Performance X-Ray Array Imaging.

The 329-type bismuth (Bi)-based metal halide (MH) polycrystalline films have potential to be applied in the new generation of X-ray imaging technology owing to high X-ray absorption coefficients and excellent detection properties. However, the mutually independent [Bi2X9]3- units and numerous grain boundaries in the material lead to low carrier transport and collection capabilities, severe ion migration, large dark currents, and poor response uniformity. Here, a new multi-phenyl ring methyltriphenylphosphonium (MTP) is designed to optimize the energy band structure. For the first time, the coupling between the A-site cation and [Bi2X9]3- is realized, making it the main contributor to the conduction band minimum (CBM), getting rid of dilemma that carrier transport is confined to [Bi2X9]3-. Further, the preparation of MTP3Bi2I9 amorphous large-area wafer is achieved by melt-quenching; the steric hindrance effect improves stability, increases ion migration energy, and promotes response uniformity (14%). Moreover, the amorphous structure takes advantage of A-site cation participation in the conductivity, achieving a record sensitivity (7601 µC Gy-1 cm-2) and low dark current (≈0.11 nA) in the field of amorphous X-ray detection, and features low-temperature large-area preparation. Ultimately, designing amorphous array imaging devices that exhibit excellent response uniformity and potential imaging capabilities is succeeded here.

Low-Trap-Density CsPbX3 Film for High-Efficiency Indoor Photovoltaics.

The continuous advancement of the Internet of Things (IoT) and photovoltaic technology has promoted the development of indoor photovoltaics (IPVs) that powers wireless devices. Nowadays, the CsPbX3 perovskite has received widespread attention because of its high power conversion efficiency (PCE) in an indoor environment and suitable band gap for IPVs. In this work, we regulated the thickness of the photoactive layer (to optimize the carrier transport process without affecting indoor absorption) and bromine substitution (to adjust the band gap and improve the quality of the film) to reduce trap-assisted carrier recombination. A CsPbI2.7Br0.3 perovskite cell with excellent performance was obtained, which is superior to c-Si cells in a low-light environment. The optimized device achieved PCE values of 32.69 and 33.11% under a 1000 lux fluorescent lamp and white light-emitting diode (WLED) illumination. The J-V hysteresis of the device is also effectively suppressed. Moreover, it has a steady-state output power of 7.76 µW (0.09 cm2, and can be enhanced by enlarging the areas), which can meet the consumption of many small wireless devices. It is worth noting that the optimized device has excellent applicability to be used in a complex indoor environment.

Manipulate energy transport via fluorinated spacers towards record-efficiency 2D Dion-Jacobson CsPbI3 solar cells.

Two-dimensional (2D) Dion-Jacobson (D-J)-type cesium lead iodide CsPbI3 perform remarkably in terms of stability. However, the complex interactions between spacer and inorganic layers limit its excellent progress in perovskite solar cells (PSCs). Herein, starting from the considerable structural diversity of organic spacers, we engineer 2D CsPbI3 with fine-tuning functionalities. Specifically, for the first time we embedded fluorinated aromatic cations in 2D D-J CsPbI3, and successfully applied it into construction of high-performance PSCs. Compared with constitutive 1,4-diaminobenzene (PDA), the fluorinated 2-fluorobenzene-1,4-diamine (F-PDA) component greatly expands the dipole moment from 0.59D to 3.47D, which reduces the exciton binding energy of the system. A theoretical study shows that the spacer layer and inorganic plane are more enriched with charge accumulation in (F-PDA)Csn-1PbnI3n+1. The results show that (F-PDA)Csn-1PbnI3n+1 demonstrates more significant charge transfer between organic and inorganic layers than (PDA)Csn-1PbnI3n+1, and it is confirmed in the femtosecond transient absorption experiment. Moreover, the interactions of the fluorinated spacer with the [PbI6]4- plane effectively manipulate the crystallization quality, and thus the ion migration and defect formation of target 2D CsPbI3 are inhibited. As a result, we obtained a record power conversion efficiency (PCE) beyond 15% for 2D D-J (F-PDA)Cs3Pb4I13 (n = 4) PSCs with significantly improved environmental stability compared with the three-dimensional (3D) counterparts.

Unveiling the Effects of Hydrolysis-Derived DMAI/DMAPbI x Intermediate Compound on the Performance of CsPbI3 Solar Cells.

Introducing hydroiodic acid (HI) as a hydrolysis-derived precursor of the intermediate compounds has become an increasingly important issue for fabricating high quality and stable CsPbI3 perovskite solar cells (PSCs). However, the materials composition of the intermediate compounds and their effects on the device performance remain unclear. Here, a series of high-quality intermediate compounds are prepared and it is shown that they consist of DMAI/DMAPbI x . Further characterization of the products show that the main component of this system is still CsPbI3. Most of the dimethylammonium (DMA+) organic component is lost during annealing. Only an ultrasmall amount of DMA+ is doped into the CsPbI3 and its structure is stabilized. Meanwhile, excessive DMA+ forms Lewis acid-base adducts and interactions with Pb2+ on the CsPbI3 surface. This process passivates the CsPbI3 film and decreases the recombination rate. Finally, CsPbI3 film is fabricated with high crystalline, uniform morphology, and excellent stability. Its corresponding PSC exhibits stable property and improved power conversion efficiency (PCE) up to 17.3%.