Oriented nucleation in formamidinium perovskite for photovoltaics.

The black phase of formamidinium lead iodide (FAPbI3) perovskite shows huge promise as an efficient photovoltaic, but it is not favoured energetically at room temperature, meaning that the undesirable yellow phases are always present alongside it during crystallization1-4. This problem has made it difficult to formulate the fast crystallization process of perovskite and develop guidelines governing the formation of black-phase FAPbI3 (refs. 5,6). Here we use in situ monitoring of the perovskite crystallization process to report an oriented nucleation mechanism that can help to avoid the presence of undesirable phases and improve the performance of photovoltaic devices in different film-processing scenarios. The resulting device has a demonstrated power-conversion efficiency of 25.4% (certified 25.0%) and the module, which has an area of 27.83 cm2, has achieved an impressive certified aperture efficiency of 21.4%.

Stability-limiting heterointerfaces of perovskite photovoltaics.

Optoelectronic devices consist of heterointerfaces formed between dissimilar semiconducting materials. The relative energy-level alignment between contacting semiconductors determinately affects the heterointerface charge injection and extraction dynamics. For perovskite solar cells (PSCs), the heterointerface between the top perovskite surface and a charge-transporting material is often treated for defect passivation1-4 to improve the PSC stability and performance. However, such surface treatments can also affect the heterointerface energetics1. Here we show that surface treatments may induce a negative work function shift (that is, more n-type), which activates halide migration to aggravate PSC instability. Therefore, despite the beneficial effects of surface passivation, this detrimental side effect limits the maximum stability improvement attainable for PSCs treated in this way. This trade-off between the beneficial and detrimental effects should guide further work on improving PSC stability via surface treatments.

Configurable Organic Charge Carriers toward Stable Perovskite Photovoltaics.

Due to their solution processability and unique photoelectric characteristics, perovskite solar cells (PSCs) have shown considerable promise in the area of renewable energy. Although their power conversion efficiency (PCE) has risen from 3.8% to 25.7% in only a few years, their short lifetime and high material prices continue to be key roadblocks to commercial viability. Charge transporting materials (CTMs), such as hole/electron transporting materials, are critical components in PSCs because they not only govern hole or electron extraction and transporting from the perovskite layer to the electrodes but also protect the perovskite from direct contact with the ambient environment. CTMs are split into two types: inorganic CTMs (ICTMs) and organic CTMs (OCTMs). Because of their inexpensive prices, well-adjusted energy levels, and low temperature solution-processed features, OCTMs have been more frequently explored and employed than ICTMs. Various forms of OCTMs with more straightforward synthetic pathways and better performance have been thoroughly researched. Recent achievements in the development of OCTMs will be discussed and evaluated on a molecular level in this study, which will include a systematic categorization of OCTMs based on molecular functionalization techniques. In order to achieve highly efficient and stable PSCs, we will present insights on the structure-property relationship in the design of OCTMs as well as device stability. We hope that this analysis will serve as a comprehensive reference to molecular design guidelines for various types of OCTMs, spurring greater research toward designing highly efficient and OCTMs for stable PSCs.

Modulating hot carrier cooling and extraction with A-site organic cations in perovskites.

Hot carrier solar cells could offer a solution to achieve high efficiency solar cells. Due to the hot-phonon bottleneck in perovskites, the hot carrier lifetime could reach hundreds of ps. Such that exploring perovskites could be a good way to promote hot carrier technology. With the incorporation of large organic cations, the hot carrier lifetime can be improved. By using ultrafast transient spectroscopy, the hot carrier relaxation and extraction kinetics are measured. From the transient kinetics, 2-phenyl-acetamidine cation based perovskites exhibit the highest initial carrier temperature, longest carrier relaxation, and slowest hot carrier relaxation. Such superior behavior could be attributed to reduced electron-phonon coupling induced by lattice strain, which is a result of the large organic cation and also a possible surface electronic state change. Our discovery exhibits the potential to use large organic cations for the use of hot carrier perovskite solar cells.

Development of the assessment standards of the International Classification of Functioning, Disability, and Health (ICF) Geriatric Core Set through a modified Delphi method.

BACKGROUND: There is currently a lack of functional assessment tools based on the International Classification of Functioning, Disability, and Health (ICF) theoretical framework that are specific for older adults. OBJECTIVE: The aim of the present study was to develop Chinese assessment standards of the ICF Geriatric Core Set for functional evaluation of older adults. METHODS: A two-stage study process was conducted to develop the assessment standards of the ICF Geriatric Core Set: establishment of candidate assessment standards, and a modified Delphi consensus process including a pilot survey and two-round formal expert survey. Thirty participants in the field of ICF and geriatric rehabilitation were recruited. The suitability of the assessment standards in the questionnaires was rated using a Likert 5-level scoring method. The arithmetic mean, the full mark ratio and the coefficient of variation (CV) were used as screening indicators for the assessment standards, and modification was made for several standards, in line with the Delphi results and the expert panel discussion. RESULTS: Thirty-three candidate assessment standards belonging to 17 categories were generated. A total of 26 and 24 experts in the field of ICF and geriatric rehabilitation participated in the two-round survey, respectively. Five standards belonging to four categories entered into the second-round survey directly, five standards belonged to five categories entered with minor modification, and nine standards belonging to seven categories were redesigned based on the literature and discussion of the expert panel. In the second-round survey,15 assessment standards belonging to 15 categories met the screening requirements and four assessment standards belonged to the two remaining categories that needed a criterion and which the expert panel discussed for the final decision. CONCLUSIONS: Using the modified Delphi method, the assessment standards of the ICF Geriatric Core Set have been developed.Future work should focus on the reliability and validity of the the assessment standards and their application to the health management of older adults.

Quadruple UV LED Array for Facile, Portable, and Online Intrinsic Fluorescent Imaging of Protein in a Whole Gel Electrophoresis Chip.

Intrinsic fluorescence imaging (IFI) has been used for the stain-free detection of proteins in slab gel. However, complicated detection setups and small irradiation area limited the development of facile, online, and portable imaging of the whole slab gel. We here designed a quadruple UV LED array to produce even and powerful area light for direct irradiation of gel electrophoresis chip (GEC) at 275 nm. In addition, we only used a filter of 365 nm, a UV camera lens, and a CCD for IFI detection. We integrated the simple detection setup with the small GEC to construct the IFI-GEC device with a portable size of 15 × 15 × 38 cm. We detected three model proteins to demonstrate the good evenness of the LED array and the online imaging of the whole GEC. Furthermore, the reproducible IFI-GEC detection was completed within 10 min and the LOD was as low as 40 ng for lysozyme detection. All results indicated the potential of the IFI-GEC device for online and portable detection of proteins without staining.

XPO1 is a new target of homoharringtonine (HHT): Making NPMc+ AML cells much more sensitive to HHT treatment.

Acute myeloid leukemia (AML) is a heterogeneous disease and about one third of AML patients carry nucleophosmin (NPM1) mutation. Because 95% mutations give NPM1 an additional nuclear export signaling (NES) and dislocate NPM1 in cytoplasm (NPMc+), relocating NPM1 in nucleus provide an innovative strategy for treating this type of AML. The nuclear export of NPM1 depends on the nuclear protein export receptor XPO1, which recognizes the NES sequence on NPM1. Homoharringtonine (HHT) is a first-line chemotherapy drug of AML, yet the exact mechanism of its anti-AML activity is elusive. In this study, we found that HHT can directly target XPO1 to its NES-binding cleft, bind to Cys528 of XPO1, and inhibits its nuclear transport function. In addition, HHT can block NPMc+ proteins nuclear export and thus make NPMc+ AML cells much more sensitive to HHT treatment. Furthermore, the sensitivity of NPMc+ AML cells to HHT is a universal phenomenon irrespective of the different genetic lesions of AML. Taken together, our findings suggest that XPO1 is a new target of HHT and provide a novel strategy for NPMc+ AML treatment.

Magnesium chelatase subunit D is not only required for chlorophyll biosynthesis and photosynthesis, but also affecting starch accumulation in Manihot esculenta Crantz.

BACKGROUND: Magnesium chelatase plays an important role in photosynthesis, but only a few subunits have been functionally characterized in cassava. RESULTS: Herein, MeChlD was successfully cloned and characterized. MeChlD encodes a magnesium chelatase subunit D, which has ATPase and vWA conservative domains. MeChlD was highly expressed in the leaves. Subcellular localization suggested that MeChlD:GFP was a chloroplast-localized protein. Furthermore, the yeast two-hybrid system and BiFC analysis indicated that MeChlD interacts with MeChlM and MePrxQ, respectively. VIGS-induce silencing of MeChlD resulted in significantly decreased chlorophyll content and reduction the expression of photosynthesis-related nuclear genes. Furthermore, the storage root numbers, fresh weight and the total starch content in cassava storage roots of VIGS-MeChlD plants was significantly reduced. CONCLUSION: Taken together, MeChlD located at the chloroplast is not only required for chlorophyll biosynthesis and photosynthesis, but also affecting the starch accumulation in cassava. This study expands our understanding of the biological functions of ChlD proteins.

Suppressing ion migration in metal halide perovskite via interstitial doping with a trace amount of multivalent cations.

Cations with suitable sizes to occupy an interstitial site of perovskite crystals have been widely used to inhibit ion migration and promote the performance and stability of perovskite optoelectronics. However, such interstitial doping inevitably leads to lattice microstrain that impairs the long-range ordering and stability of the crystals, causing a sacrificial trade-off. Here, we unravel the evident influence of the valence states of the interstitial cations on their efficacy to suppress the ion migration. Incorporation of a trivalent neodymium cation (Nd3+) effectively mitigates the ion migration in the perovskite lattice with a reduced dosage (0.08%) compared to a widely used monovalent cation dopant (Na+, 0.45%). The photovoltaic performances and operational stability of the prototypical perovskite solar cells are enhanced with a trace amount of Nd3+ doping while minimizing the sacrificial trade-off.

Integrated Metabolomic and Transcriptomic Analyses Reveals Sugar Transport and Starch Accumulation in Two Specific Germplasms of Manihot esculenta Crantz.

As a starchy and edible tropical plant, cassava (Manihot esculenta Crantz) has been widely used as an industrial raw material and a dietary source. However, the metabolomic and genetic differences in specific germplasms of cassava storage root were unclear. In this study, two specific germplasms, M. esculenta Crantz cv. sugar cassava GPMS0991L and M. esculenta Crantz cv. pink cassava BRA117315, were used as research materials. Results showed that sugar cassava GPMS0991L was rich in glucose and fructose, whereas pink cassava BRA117315 was rich in starch and sucrose. Metabolomic and transcriptomic analysis indicated that sucrose and starch metabolism had significantly changing metabolites enrichment and the highest degree of differential expression genes, respectively. Sugar transport in storage roots may contribute to the activities of sugar, which will eventually be exported to transporters (SWEETs), such as (MeSWEET1a, MeSWEET2b, MeSWEET4, MeSWEET5, MeSWEET10b, and MeSWEET17c), which transport hexose to plant cells. The expression level of genes involved in starch biosynthesis and metabolism were altered, which may result in starch accumulation. These results provide a theoretical basis for sugar transport and starch accumulation and may be useful in improving the quality of tuberous crops and increasing yield.

Gel Electrophoresis Chip Using Joule Heat Self-Dissipation, Short Run Time, and Online Dynamic Imaging.

Gel electrophoresis (GE) is one of the most general tools in biomedicine. However, it suffers from low resolution, and its mechanism has not been fully revealed yet. Herein, we presented the dispersion model of w2 (t) ∝ Tt, showing the band dispersion (w) via temperature (T) and running time (t) control. Second, we designed an efficient GE chip via the time control and rapid Joule heat self-dissipation by thermal conductive plastic (TCP) and electrode buffer. Third, we conducted the simulations on TCP and polymethylmethacrylate (PMMA) chips, unveiling that (i) the temperature of TCP was lower than the PMMA one, (ii) the temperature uniformity of TCP was better than the PMMA one, and (iii) the resolution of TCP was superior to the PMMA one. Fourth, we designed both TCP and PMMA chips for experimentally validating the dispersion model, TCP chip, and simulations. Finally, we applied the TCP chip to thalassemia and model urine protein assays. The TCP chip has merits of high resolution, rapid run of 6-10 min, and low cost. This work paves the way for greatly improving electrophoretic techniques in gel, chip, and capillary via temperature and time control for biologic study, biopharma quality control, clinical diagnosis, and so on.

Wide-Gap Perovskite via Synergetic Surface Passivation and Its Application toward Efficient Stacked Tandem Photovoltaics.

Superior bandgap tunability enables solution-processed halide perovskite a promising candidate for multi-junction photovoltaics (PVs). Particularly, optically coupling wide-gap perovskite by stacking with commercially available PVs such as silicon and CIGS (also known as 4-terminal tandem) simplifies the technology transfer process, and further advances the commercialization potential of perovskite technology. However, compared with matured PV materials and the phase-pure FAPbI3 , wide-gap perovskite still suffers from huge voltage deficits. Here, the authors take advantage of the synergetic effect behind a sequential fluoride and organic ammonium salt surface passivation strategy to control non-radiative energy losses, and obtained a 17.7% efficiency in infrared-transparent wide-gap perovskite solar cells (21.1% for opaque device), and achieved efficiencies of over 25% when stacked with commercial Si and CIGS products with original PCEs of 18-20% under a 4-terminal working condition.

The Protective Effect of Picroside II on Isoflurane-Induced Neuronal Injury in Rats via Downregulating miR-195.

INTRODUCTION: Numerous pieces of evidence demonstrated that isoflurane induces hippocampal cell injury and cognitive impairments. Picroside II has been investigated for its anti-apoptosis and antioxidant neuroprotective effects. We aimed to explore the protective effects of picroside II and the role of microRNA-195 (miR-195) on isoflurane-induced neuronal injury in rats. METHODS: The Morris water maze test was used to evaluate the effects of isoflurane on rats regarding escape latency and time in quadrant parameters. Real-time quantitative PCR was used to detect the expression levels of miR-195 and pro-inflammatory cytokines, including inter-leukin-1ß (IL-1ß), interleukin-6 (IL-6), and tumor necrosis factor-α (TNF-α) mRNA, in the hippocampal tissues and neuronal cells. RESULTS: The picroside II significantly improves isoflurane-induced higher escape latency and lower time spent in the quadrant compared with the control rats. Picroside II also promotes cell viability and suppresses cell apoptosis of isoflurane-induced neuronal cells. Besides, picroside II suppresses the expression of pro-inflammatory cytokines (IL-1ß, IL-6, and TNF-α) and miR-195 in vivo and in vitro. Furthermore, overexpression of miR-195 abrogates the effects of picroside II on the expression of pro-inflammatory cytokines. The appropriate dose of picroside II is 20 mg/kg. CONCLUSION: Picroside II could protect the nervous system possibly through inhibiting the inflammatory response in the isoflurane-induced neuronal injury of rats. The protective effect of picroside II may be achieved by downregulating the expression of miR-195 and then inhibiting the inflammatory response.

(±)-Pheharmines A-B, two pairs of racemic alkaloids with a morpholino[4,3,2-hi]ß-carboline core, from the roots of Peganum harmala.

Two pairs of unprecedented ß-carboline-phenylpropanoid heterogeneous alkaloids, (±)-pheharmines A-B (1-4), characterized by a morpholino[4,3,2-hi]ß-carboline core with two chiral centers, were isolated from the roots of Peganum harmala. The structures, including their absolute configurations, were identified using spectroscopic analyses and electronic circular dichroism (ECD) calculations. The biosynthetic hypothesis for the formation of pheharmines A-B was proposed. Compounds 1-4 exhibited moderate cytotoxic activities against HL-60 cell lines.

[Isoquinoline alkaloids from two species of Thalictrum genus plants].

The chemical constituents from the roots of Thalictrum cultratum and T. baicalense were investigated. By various isolation methods, such as silica gel, aluminium oxide, ODS, and Sephadex LH-20 column chromatographies, and semi-preparative HPLC, 11 simple isoquinoline alkaloids were isolated from the ethanol extract of the roots of these two plants, including a new compound, named dehydrothalflavine(1), and ten known ones(2-11): N-methylcorydaline(2), N-methylthalidaldine(3), thaliflavine(4), oxyhydrastinine(5), noroxyhydrastinine(6), dimethoxyisoquinolone(7), thalactamine(8), dehydronoroxyhydrastinine(9), 6,7-dimethoxy-2-methyl-1,2,3,4-tetrahydroisoquinoline(10), and isopicnarrhine(11). Their structures were elucidated on the basis of HR-ESI-MS and 1 D and 2 D NMR techniques. Compound 1 was a new isoquinoline alkaloid. Compound 11 was obtained from Tha-lictrum plant for the first time. All compounds did not show cytotoxic activities against HL-60, U937, HCT116, Caco-2, and HepG2 cancer cell lines.

Surface Reconstruction of Halide Perovskites During Post-treatment.

Postfabrication surface treatment strategies have been instrumental to the stability and performance improvements of halide perovskite photovoltaics in recent years. However, a consensus understanding of the complex reconstruction processes occurring at the surface is still lacking. Here, we combined complementary surface-sensitive and depth-resolved techniques to investigate the mechanistic reconstruction of the perovskite surface at the microscale level. We observed a reconstruction toward a more PbI2-rich top surface induced by the commonly used solvent isopropyl alcohol (IPA). We discuss several implications of this reconstruction on the surface thermodynamics and energetics. Particularly, our observations suggest that IPA assists in the adsorption process of organic ammonium salts to the surface to enhance their defect passivation effects.

Supramolecular Nanosubstrate-Mediated Delivery for CRISPR/Cas9 Gene Disruption and Deletion.

The clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein 9 (CRISPR/Cas9) is an efficient and precise gene-editing technology that offers a versatile solution for establishing treatments directed at genetic diseases. Currently, CRISPR/Cas9 delivery into cells relies primarily on viral vectors, which suffer from limitations in packaging capacity and safety concerns. These issues with a nonviral delivery strategy are addressed, where Cas9•sgRNA ribonucleoprotein (RNP) complexes can be encapsulated into supramolecular nanoparticles (SMNP) to form RNP⊂SMNPs, which can then be delivered into targeted cells via supramolecular nanosubstrate-mediated delivery. Utilizing the U87 glioblastoma cell line as a model system, a variety of parameters for cellular-uptake of the RNP-laden nanoparticles are examined. Dose- and time-dependent CRISPR/Cas9-mediated gene disruption is further examined in a green fluorescent protein (GFP)-expressing U87 cell line (GFP-U87). The utility of an optimized SMNP formulation in co-delivering Cas9 protein and two sgRNAs that target deletion of exons 45-55 (708 kb) of the dystrophin gene is demonstrated. Mutations in this region lead to Duchenne muscular dystrophy, a severe genetic muscle wasting disease. Efficient delivery of these gene deletion cargoes is observed in a human cardiomyocyte cell line (AC16), induced pluripotent stem cells, and mesenchymal stem cells.

Two new prenylated coumarins from roots of Zanthoxylum nitidum.

Two new prenylated coumarins, 3'-hydroxytoddanone (1), and isotoddalolactone (2), along with four known analogues (3-6) were isolated from the roots of Zanthoxylum nitidum. Their chemical structures were elucidated based on extensive spectroscopic interpretation and HR-ESI-MS analysis. The absolute configuration of compound 2 was determined by comparing experimental ECD spectrum with that calculated by the time-dependent density functional theory (TDDFT) method. Compounds 4-6 were isolated from the Zanthoxylum genus for the first time. The two new compounds were tested for antiproliferative activities in vitro on the HL-60, K562 and THP-1 cell lines. Compounds 1 and 2 exhibited moderate cell growth inhibitory activities in vitro against human leukemic HL-60 cell lines, with IC50 values of 32.64 and 33.15 µM, respectively.

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared via Low-Temperature in Situ Dynamic Thermal Crystallization.

The present study systematically investigates the morphology and crystallization process of inorganic CsPbBr3 perovskite layer films fabricated by thermal coevaporation in conjunction with continuous low-temperature thermal annealing to promote in situ dynamic thermal crystallization. The results confirm for the first time that both the crystal grain size and the compactness of the CsPbBr3 films can be tuned during the thermal coevaporation fabrication process via in situ dynamic thermal crystallization. The performance of the PeLEDs employing the CsPbBr3 films as the emitter layer is investigated in detail with respect to the substrate temperature and deposition rate employed during deposition of the CsPbBr3 film. This study provides guidelines for developing suitable film production processes and highlights future challenges that must be addressed to facilitate the commercial development of large-area, uniform, and flexible perovskite-based optoelectronic devices.

Molecular Interaction Regulates the Performance and Longevity of Defect Passivation for Metal Halide Perovskite Solar Cells.

Defect passivation constitutes one of the most commonly used strategies to fabricate highly efficient perovskite solar cells (PSCs). However, the durability of the passivation effects under harsh operational conditions has not been extensively studied regardless of the weak and vulnerable secondary bonding between the molecular passivation agents and perovskite crystals. Here, we incorporated strategically designed passivating agents to investigate the effect of their interaction energies on the perovskite crystals and correlated these with the performance and longevity of the passivation effects. We unraveled that the passivation agents with a stronger interaction energy are advantageous not only for effective defect passivation but also to suppress defect migration. The prototypical PSCs treated with the optimal passivation agent exhibited superior performance and operational stability, retaining 81.9 and 85.3% of their initial performance under continuous illumination or nitrogen at 85 °C after 1008 h, respectively, while the reference device completely degraded during that time. This work provides important insights into designing operationally durable defect passivation agents for perovskite optoelectronic devices.