Tailoring Silicon Nitride Surface Chemistry for Facilitating Odontogenic Differentiation of Rat Dental Pulp Cells.

Silicon nitride (Si3N4) can facilitate bone formation; hence, it is used as a biomaterial in orthopedics. Nevertheless, its usability for dentistry is unexplored. The aim of the present study was to investigate the effect of Si3N4 granules for the proliferation and odontogenic differentiation of rat dental pulp cells (rDPCs). Four different types of Si3N4 granules were prepared, which underwent different treatments to form pristine as-synthesized Si3N4, chemically treated Si3N4, thermally treated Si3N4, and Si3N4 sintered with 3 wt.% yttrium oxide (Y2O3). rDPCs were cultured on or around the Si3N4 granular beds. Compared with the other three types of Si3N4 granules, the sintered Si3N4 granules significantly promoted cellular attachment, upregulated the expression of odontogenic marker genes (Dentin Matrix Acidic Phosphoprotein 1 and Dentin Sialophosphoprotein) in the early phase, and enhanced the formation of mineralization nodules. Furthermore, the water contact angle of sintered Si3N4 was also greatly increased to 40°. These results suggest that the sintering process for Si3N4 with Y2O3 positively altered the surface properties of pristine as-synthesized Si3N4 granules, thereby facilitating the odontogenic differentiation of rDPCs. Thus, the introduction of a sintering treatment for Si3N4 granules is likely to facilitate their use in the clinical application of dentistry.

Augmentation of Bone Regeneration by Depletion of Stress-Induced Senescent Cells Using Catechin and Senolytics.

Despite advances in bone regenerative medicine, the relationship between stress-induced premature senescence (SIPS) in cells and bone regeneration remains largely unknown. Herein, we demonstrated that the implantation of a lipopolysaccharide (LPS) sustained-release gelatin sponge (LS-G) increases the number of SIPS cells and that the elimination of these cells promotes bone formation in critical-sized bone defects in the rat calvaria. Histological (hematoxylin-eosin and SA-ß-gal) and immunohistological (p16 and p21 for analyzing cellular senescence and 4-HNE for oxidation) staining was used to identify SIPS cells and elucidate the underlying mechanism. Bone formation in defects were analyzed using microcomputed tomography, one and four weeks after surgery. Parallel to LS-G implantation, local epigallocatechin gallate (EGCG) administration, and systemic senolytic (dasatinib and quercetin: D+Q) administration were used to eliminate SIPS cells. After LS-G implantation, SA-ß-gal-, p16-, and p21-positive cells (SIPS cells) accumulated in the defects. However, treatment with LS-G+EGCG and LS-G+D+Q resulted in lower numbers of SIPS cells than that with LS-G in the defects, resulting in an augmentation of newly formed bone. We demonstrated that SIPS cells induced by sustained stimulation by LPS may play a deleterious role in bone formation. Controlling these cell numbers is a promising strategy to increase bone regeneration.

[MYC gene amplification attributed to double minutes in a patient with atypical chronic myeloid leukemia].

A 61-year-old man was admitted to our hospital with fever and massive leukocytosis. A bone marrow smear revealed an increased density of myeloid cells in various stages of maturation as well as dysplasia in the neutrophils. There was no proliferation of blasts, eosinophils, or basophils. Genomic analysis of the bone marrow cells revealed no detectable abnormalities associated with myeloproliferative neoplasms, including BCR-ABL1. Therefore, the patient was diagnosed with atypical chronic myeloid leukemia (aCML). Chromosomal analysis revealed the presence of 1-17 double minute chromosomes (dmin) in 20 of 20 tumor cells examined. Multiple MYC signals were detected via interphase fluorescence in situ hybridization, indicating MYC gene amplification in the dmins. Three months after the oral administration of hydroxyurea, leukocytosis reoccurred. Therefore, induction therapy followed with umbilical cord blood transplantation was performed. However, MYC signals remained detectable in the bone marrow sample obtained immediately after neutrophil engraftment, indicating the presence of residual tumor cells. To the best of our knowledge, this is the first case report of aCML with dmin gene amplification, suggesting that the dmin MYC amplification exacerbated the patient's disease.

[Essential thrombocythemia correctly diagnosed through the guidance of comprehensive genomic profiling].

In 2003, a 60-year-old man presenting with thrombocytosis was referred to our hospital. Laboratory tests revealed normal white blood cell count and hemoglobin level. Bone marrow examination showed an increased number of megakaryocytes with dysplasia. G-banded karyotype analysis revealed del (5q). Initially, the patient was diagnosed with myelodysplastic/myeloproliferative neoplasm (MDS/MPN), and it was treated with aspirin and hydroxyurea. During the treatment course, fluorescence in situ hybridization for CSF1R and EGR1 was performed to detect del (5q), which showed negative results. In 2017, the patient had increased platelet count despite receiving treatment. A comprehensive genomic profiling revealed that the deleted region in this case was present in 5q14-5q23, which was different from the common deleted region of 5q- syndrome (5q32-5q33, where CSF1R was present) and that of high-risk MDS or acute myeloid leukemia (5q31, where EGR1 was present). Moreover, a CALR mutation was also detected. This case met the diagnostic criteria of essential thrombocythemia. The platelet count decreased with the administration of anagrelide. In conclusion, comprehensive genetic profiling is very important, and it leads to accurate diagnosis and therapy.

In vitro study on selective removal of bovine demineralized dentin using nanosecond pulsed laser at wavelengths around 5.8 µm for realizing less invasive treatment of dental caries.

In the treatment of dental caries, less invasive methods are strongly required. However, conventional dental lasers cannot always achieve selective removal of caries or good bonding with a composite resin. Based on the optical absorption characteristics of dentin, wavelengths around 6 µm are promising in this regard. Our previous study indicated the possibility of selective removal of demineralized dentin using a nanosecond pulsed laser at wavelengths around 6 µm. In the present study, the optimal laser irradiation conditions were investigated for achieving selective removal of demineralized dentin. Bovine dentin was used, and its laser ablation characteristics were evaluated. The results indicated that demineralized dentin could be selectively removed, without causing cracking or damage to sound dentin, at laser wavelengths of 5.75 and 5.80 µm and average power densities of 30-40 W/cm(2). These optimal laser irradiation conditions also realized higher bonding strength with a composite resin than was possible using an Er:YAG laser. The use of nanosecond pulses allowed the thermal confinement condition to be satisfied, leading to a reduction in tissue damage, including degradation of dental pulp vitality. Thus, a nanosecond pulsed laser at 5.8 µm was found to be effective for less invasive caries treatment.

Microbial contamination of spittoons and germicidal effect of irradiation with krypton chloride excimer lamps (Far UV-C 222 nm).

BACKGROUND: In dentistry, instruments, appliances, and body fluids such as saliva or blood are possible sources of infection. Although conventional antiseptic procedures effectively prevent infection, spittoons cannot be sanitized between each treated patient and are usually washed only with running water. However, there is currently no fast and efficient disinfection method that can be implemented between treatments. An optically filtered krypton chloride excimer lamp using ultraviolet light (Far UV-C) in the 200-230 nm wavelength range (innocuous to humans) has been recently used as a virus- and bacteria-inactivating technology. This study aimed to identify the bioburden of a dental spittoon and examine the susceptibility of two oral Streptococcus and two Enterococci to 222-nm Far UV-C by irradiating the spittoon with 222 nm Far UV-C for 5 min before evaluating the disinfection effect. METHODS: Bacterial analysis and real-time polymerase-chain reaction testing was used to confirm the spittoon's biological contamination. Bacterial susceptibility to a 222-nm Far UV-C was determined with a graded dose irradiation test. After each treatment, the spittoon was irradiated with 222-nm Far UV-C for 5 min, and the disinfecting effect was evaluated. Microbial analysis of the spittoon's surface was performed using the Silva database. RESULTS: We found that > 97% of the microbes consisted of six bacterial phyla, whereas no viruses were found. Pseudomonas aeruginosa was frequently detected. The 1-log reduction value of two oral-derived Streptococci and two Enterococci species at 222-nm Far UV-C was 4.5-7.3 mJ/cm2. Exposure of the spittoon to 222-nm Far UV-C at 3.6-13.5 mJ/cm2 significantly decreased bacterial counts (p < 0.001). CONCLUSIONS: Irradiation with 222-nm Far UV-C at 3.6-13.5 mJ/cm2 significantly eliminates bacteria in spittoons, even when they are only rinsed with water. Hence, 222-nm Far UV-C irradiation may inhibit the risk of bacterial transmission from droplets in sink surfaces.

Mechanism of dentin hardness measurements using a dentin hardness measuring device with a light-emitting diode.

Significance: Managing caries is imperative in a rapidly aging society. Current diagnoses use qualitative indices. However, a quantitative evaluation of hardness in a clinical setting may lead to more accurate diagnoses. Previously, hardness meter using indenter with light for tooth monitoring (HAMILTOM) was developed to quantitatively measure tooth hardness. Herein, the physical interpretation of dentin hardness measured using HAMILTOM and the dentin hardness measurement mechanism are discussed. Aim: This study evaluates the mechanism of dentin hardness measurements using HAMILTOM physically and compare the invasiveness to dentin by HAMILTOM with those using a dental probe for palpation. Approach: Eleven bovine dentin samples were used to create caries models. HAMILTOM measured the dark areas, and its indentations were observed using scanning electron microscopy. Also, its invasiveness was evaluated by comparing the results with those from dental probe palpation. Results: The indentation areas were smaller than the dark areas in HAMILTOM, which may be due to exuded water from the dentin sample and the elastic recovery of dentin sample. Additionally, the dental probe indentation was deeper than the HAMILTOM indentations. Conclusions: The results demonstrate that the indentation areas were smaller than the dark areas measured by HAMILTOM, which might contain the influence of exuded water and the deformation of dentin sample. Also, HAMILTOM is less invasive than dental probe palpation. In the future, HAMILTOM may become a standard hardness measuring method to diagnose root caries.

Effects of a co-stimulation with S-PRG filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase-1 production by human dental pulp fibroblast-like cells.

The present study investigated the effects of a co-stimulation with surface reaction-type pre-reacted glass-ionomer (S-PRG) filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase (MMP)-1 production by human dental pulp fibroblast-like cells (hDPFs). S-PRG filler eluate contains 6 ions (F, Na, Al, B, Sr, and Si) released from S-PRG filler. Each S-PRG filler eluate and MDP stimulation enhanced MMP-1 production by hDPFs. The co-stimulation with S-PRG filler eluate and MDP enhanced MMP-1 production more than the MDP stimulation alone. A similar stimulation induced the phosphorylation of ERK 1/2. The increased secretion of MMP-1 and enhanced phosphorylation of ERK 1/2 by the co-stimulation with S-PRG filler eluate and MDP were suppressed by the selective and potent CaSR antagonist NPS 2143. Since strontium binds to CaSR, these results suggest that the enhanced production of MMP-1 by the co-stimulation with S-PRG filler eluate and MDP was due to the effects of strontium.

Localization of senescent cells under cavity preparations in rats and restoration of reparative dentin formation by senolytics.

Reparative dentin formed by dental cavity preparation (DCP) is frequently used in clinical operations and plays a pivotal role in pulp protection. Recent reports have shown that senescent cells induced by various stressors aggravate many diseases. They can be treated using senolytics, which are drugs that selectively eliminate senescent cells. However, the association between DCP, senescent cells, and senolytics remains unclear. In this study, we established a rat model of DCP and analyzed the spatiotemporal localization of senescent cells in the pulp. The results showed that p21- and p16-positive senescent cells appeared mostly around the pulp horn (PH) under DCP. Furthermore, administration of senolytics (dasatinib and quercetin) successfully eliminated these senescent cells, thereby restoring the volume of reparative dentin formation. These data indicate that senescent cells induced by DCP may hamper the formation of reparative dentin. Senescent cells may be targets for the development of new restorative dentistry therapies.

[Lethal pulmonary hemorrhage caused by Stenotrophomonas maltophilia pneumonia in a patient with acute myeloid leukemia].

A 63-year-old man had been treated with intensive chemotherapy for acute myeloid leukemia. On the 49th hospital day, he had febrile neutropenia after the second course of induction chemotherapy. On the 53 rd hospital day, he presented with hemoptysis and developed acute respiratory failure requiring ventilator support within several hours. On the 54th hospital day, the patient died with hemorrhagic respiratory infection. Stenotrophomonas maltophilia was detected in bacterial cultures of his blood, bronchoalveolar lavage, and sputum. To our knowledge, nine cases of fatal hemorrhagic pneumonia caused by S. maltophilia have been reported in the literature. All the patients had hematological neoplasms and were severely neutropenic after one or two intensive chemotherapy regimens. They died shortly (within 3 days) after the onset of the hemorrhagic pneumonia. Management of the infection caused by S. maltophilia is hampered by high-level intrinsic resistance to multiple antibiotics and the increasing occurrence of acquired resistance to co-trimoxazole and fluoroquinolones. It would be important to keep in mind that hemorrhagic respiratory infection caused by S. maltophilia may lead to a fulminant and lethal course in severely neutropenic patients with hematological neoplasms and to recognize which antibiotic agents are more sensitive to S. maltophilia in each institution.

Demonstration of an optical dentin hardness measuring device using bovine dentin with different demineralization times.

Significance: The increase in root caries is a serious problem as society ages. Root caries is diagnosed by inspection and palpation, which are qualitative. A method to objectively and quantitatively evaluate the progress of root caries in a clinical setting is strongly desired. The root caries could be diagnosed by measuring hardness because dentin becomes softer as the caries progresses. Vickers hardness has been customarily used as an indicator of tooth hardness. However, this method cannot be used to in vivo teeth because the teeth must be dried prior to measurement to make the indentation. A hardness meter using an indenter with light for tooth monitoring (HAMILTOM) is proposed as an optical device. HAMILTOM could measure hardness of teeth in wet condition as a dark area while applying a load to dentins without drying. Therefore, HAMILTOM may realize hardness measurements of in vivo teeth in a clinical setting quantitatively. Aim: The aim of our study is to demonstrate the optical dentin hardness measuring device HAMILTOM using bovine dentin with different demineralization times and to evaluate the correlation between the dark areas measured by HAMILTOM and the Vickers hardness measured by the Vickers hardness tester. Approach: The samples were 20 bovine dentins. They were demineralized by a lactic acid solution with different times and divided into groups 1 and 2 of 10 samples each. In both groups, the dark areas and Vickers hardness were measured for each sample. Group 1 was used to obtain a calibration curve to calculate Vickers hardness from the dark area. Group 2 was used to validate the calibration curve obtained from the dentin samples of group 1. Results: The areas appearing black without a total internal reflection of the indenter measured by HAMILTOM increased as the demineralization time increased. Additionally, the Vickers hardness of group 2 calculated by the dark areas of group 2 and the calibration curve obtained in group 1 and the Vickers hardness of group 2 measured by the Vickers hardness tester were strongly correlated with a determination coefficient of 0.99. Conclusions: The results demonstrate that HAMILTOM may be a suitable alternative to the conventional method. Unlike the conventional method, which cannot be used for in vivo teeth, HAMILTOM holds potential to quantitatively evaluate the progress of caries in in vivo teeth.

Interdental Plaque Microbial Community Changes under In Vitro Violet LED Irradiation.

Oral microbiome dysbiosis has important links to human health and disease. Although photodynamic therapy influences microbiome diversity, the specific effect of violet light irradiation remains largely unknown. In this study, we analyzed the effect of violet light-emitting diode (LED) irradiation on interdental plaque microbiota. Interdental plaque was collected from 12 human subjects, exposed to violet LED irradiation, and cultured in a specialized growth medium. Next-generation sequencing of the 16S ribosomal RNA genes revealed that α-diversity decreased, whereas ß-diversity exhibited a continuous change with violet LED irradiation doses. In addition, we identified several operational taxonomic units that exhibited significant shifts during violet LED irradiation. Specifically, violet LED irradiation led to a significant reduction in the relative abundance of Fusobacterium species, but a significant increase in several species of oral bacteria, such as Veillonella and Campylobacter. Our study provides an overview of oral plaque microbiota changes under violet LED irradiation, and highlights the potential of this method for adjusting the balance of the oral microbiome without inducing antibiotic resistance.

Atypical Presenting Symptoms of Acute Onset Acquired Haemophilia with Eosinophilic Fasciitis.

Acquired haemophilia is a bleeding disorder caused by antibodies against coagulation factors. Some cases are associated with autoimmune diseases. However, no cases of acquired haemophilia with eosinophilic fasciitis have been previously reported. Herein we describe the case of a patient with eosinophilic fasciitis associated with acquired haemophilia. LEARNING POINTS: Eosinophilic fasciitis is one of the underlying diseases of acquired haemophilia.The underlying disease of acquired haemophilia should be investigated thoroughly and systematically to optimize therapeutic strategies.This is the first report of acquired haemophilia in association with eosinophilic fasciitis.

Gas Permeability of Mold during Freezing Process Alters the Pore Distribution of Gelatin Sponge and Its Bone-Forming Ability.

Freeze-drying, also known as lyophilization, is widely used in the preparation of porous biomaterials. Nevertheless, limited information is known regarding the effect of gas permeability on molds to obtain porous materials. We demonstrated that the different levels of gas permeability of molds remarkably altered the pore distribution of prepared gelatin sponges and distinct bone formation at critical-sized bone defects of the rat calvaria. Three types of molds were prepared: silicon tube (ST), which has high gas permeability; ST covered with polyvinylidene chloride (PVDC) film, which has low gas permeability, at the lateral side (STPL); and ST covered with PVDC at both the lateral and bottom sides (STPLB). The cross sections or curved surfaces of the sponges were evaluated using scanning electron microscopy and quantitative image analysis. The gelatin sponge prepared using ST mold demonstrated wider pore size and spatial distribution and larger average pore diameter (149.2 µm) compared with that prepared using STPL and STPLB. The sponges using ST demonstrated significantly poor bone formation and bone mineral density after 3 weeks. The results suggest that the gas permeability of molds critically alters the pore size and spatial pore distribution of prepared sponges during the freeze-drying process, which probably causes distinct bone formation.

Efficacy of salvage therapy with MTX-HOPE for elderly patients with heavily pretreated non-Hodgkin's lymphoma.

Methotrexate, hydrocortisone, vincristine, sobuzoxane, and etoposide (MTX-HOPE) chemotherapy was originally reported in 2007 as a salvage regimen for relapsed or refractory non-Hodgkin's lymphoma. To clarify the safety and efficacy of this regimen, we retrospectively analyzed patients at our institute. We analyzed 18 patients, including 16 with diffuse large B-cell lymphoma (DLBCL), one with follicular lymphoma (FL), and one with T-cell lymphoma. The median age at MTX-HOPE therapy was 79 (range: 68-87). Ten patients received more than 3 previous chemotherapy regimens. The median period from the initial treatment to the first MTX-HOPE administration was 53 months. No patient had severe renal dysfunction. The overall response rate was 78%, with 39% achieving CR and 39% achieving PR. The median OS and PFS after the initiation of MTX-HOPE were 10 months (range: 0.5-86 months) and 7 months (range: 0.2-86 months), respectively. The one-year OS rate was 44% and the two-year OS rate was 22%. The median number of treatment cycles was 7 (range: 1-46), and 6 patients received more than 10 cycles. Among eight patients who were over 80 years of age, 7 responded to the therapy, and the median OS and PFS of this subgroup were 19 months and 11 months, respectively. All patients tolerated the treatment well, mostly on an outpatient basis, except for one who died from infection and one who developed intracranial hemorrhage. MTX-HOPE may be a promising treatment option for elderly patients with refractory or relapsed malignant lymphoma.

Risk factors and appropriate therapeutic strategies for thrombotic microangiopathy after allogeneic HSCT.

Transplant-associated thrombotic microangiopathy (TA-TMA) is a fatal complication of allogeneic hematopoietic stem cell transplantation (allo-HSCT). However, so far, no large cohort study determined the risk factors and the most effective therapeutic strategies for TA-TMA. Thus, the present study aimed to clarify these clinical aspects based on a large multicenter cohort. This retrospective cohort study was performed by the Kyoto Stem Cell Transplantation Group (KSCTG). A total of 2425 patients were enrolled from 14 institutions. All patients were aged ≥16 years, presented with hematological diseases, and received allo-HSCT after the year 2000. TA-TMA was observed in 121 patients (5.0%) on day 35 (median) and was clearly correlated with inferior overall survival (OS) (hazard ratio [HR], 4.93). Pre- and post-HSCT statistically significant risk factors identified by multivariate analyses included poorer performance status (HR, 1.69), HLA mismatch (HR, 2.17), acute graft-versus-host disease (aGVHD; grades 3-4) (HR, 4.02), Aspergillus infection (HR, 2.29), and veno-occlusive disease/sinusoidal obstruction syndrome (VOD/SOS; HR, 4.47). The response rate and OS significantly better with the continuation or careful reduction of calcineurin inhibitors (CNI) than the conventional treatment strategy of switching from CNI to corticosteroids (response rate, 64.7% vs 20.0%). In summary, we identified the risk factors and the most appropriate therapeutic strategies for TA-TMA. The described treatment strategy could improve the outcomes of patients with TA-TMA in the future.

XPS analysis of the dentin irradiated by Er: YAG laser.

The aim of this study was to investigate the effect of Er:YAG laser irradiation on human dentin surface using X-ray photoelectron spectroscopy (XPS). 10 human dentin disks were prepared from extracted human molars for XPS analysis. These specimens were divided into two groups of five: a control group and group that were irradiated by an Er:YAG laser beam (100 mJ, 1Hz). All specimens were analyzed by XPS over a wide scanning range and narrow scanning ranges. The Ca/P ratio was calculated from the XPS results. In the results, the binding energies of Ca, P, and N in the laser-irradiated group were higher than those in the control group. The Ca/P ratio of the Er:YAG laser irradiated group (1.24+/-0.05) was significantly lower than that of the control group (1.52+/-0.16). This study showed that Er:YAG laser irradiation decreased Ca/P ratio and denatured the collagen of human dentin.

Application of hydroxyapatite nanoparticle-assembled powder using basic fibroblast growth factor as a pulp-capping agent.

We have previously fabricated hydroxyapatite (HAP) nanoparticle-assembled powder (nano-HAP) plates and granules by assembling low-crystallinity HAP nanoparticles without template/binder molecules or high-temperature/pressure treatments. In this study, we combined the nano-HAP with fibroblast growth factor (FGF) 2, which promotes odontoblast differentiation, and used this as a pulpcapping agent for dentin defects created in rat molars. The tissue response was then radiologically and histologically assessed at 1 and 2 weeks after capping, to assess the biocompatibility and ability of this material to promote hard tissue formation. The application of nano-HAP/FGF2 induced the invasion of dental pulp cells and vessels, and was consistently found to stimulate formation of a dentinal bridge containing numerous dentinal tubules. We thus succeeded in treating the pulp exposure by using a physiological approach to promote tissue regeneration. Further investigations should be performed to explain exactly how the nano-HAP/FGF2 combination contributes to calcified tissue formation.

IgM-mediated Warm Autoimmune Hemolytic Anemia: An Autopsy Report.

A 79-year-old man with Sjögren's syndrome and systemic lupus erythematosus developed acute impaired consciousness and hemolytic anemia. The patient's red blood cells agglutinated spontaneously at 25-37°C. The treatment of red blood cells with 2-mercaptoethanol resulted in the loss of spontaneous agglutination. A diagnosis of IgM-mediated warm autoimmune hemolytic anemia was made. The patient received steroid pulse and plasma exchange therapies. Rituximab was also administered. However, the patient died from multiple organ failure at six days from the symptom onset. The clinical progress of the patient and autopsy findings suggested that complement activation might have been associated with the pathology.

A review of the literature on the efficacy of mineral trioxide aggregate in conservative dentistry.

The aim of this literature review was to assess the clinical performance of MTA to establish the evidence level for its effectiveness in vital pulp therapy, perforation repair, and retrograde root canal filling. A comprehensive literature survey was performed via electronic databases of PubMed/MEDLINE. A total of 58 papers were reviewed in this study, of which 2 were systematic reviews/meta-analysis, 9 were randomized controlled trials (RCTs), and the rest were fallen into other categories. Mineral trioxide aggregate (MTA) provided better pulp protection as a direct capping material when compared with calcium hydroxide. As perforation repair materials, MTA demonstrated an excellent sealing ability in vitro. For periodontal tissues around a perforation, MTA provided normal healing processes in clinical trials. It is therefore concluded that MTA has a high potential in repairing perforations. MTA is the most promising material when used for retrograde root canal filling demonstrating normal healing in short/long term clinical outcomes.