RESUMO
In-service monitoring and adaptive digital compensation of analog imperfections in optical transponders are vital in the next-generation optical coherent transmission systems employing extremely high-order, high-speed modulation formats. A notable example of such analog impairments is the imbalance of amplitude, phase, and/or timing between the in-phase (I) and quadrature (Q) tributaries in an optical IQ modulator, namely the IQ imbalance. Recently, an IQ-imbalance estimation technique based on phase retrieval without using a coherent receiver, the so-called single-pixel optical modulation analyzer (SP-OMA), has been proposed as an affordable in-service monitoring solution for the frequency-dependent IQ imbalance in a (single-polarization) IQ modulator. In this work, we extend the concept of the SP-OMA to dual-polarization IQ modulators. A novel phase retrieval algorithm with an alternating minimization procedure is proposed for identifying the frequency-dependent IQ imbalances on both polarization channels simultaneously from a single photodetector output. The validity and feasibility of the proposed SP-OMA for a dual-polarization IQ modulator are demonstrated numerically and experimentally with a 63.25-Gbaud DP-16QAM signal.
RESUMO
In this study, the effects of bismuth (Bi) irradiation on InAs quantum dot (QD) lasers operating in the telecommunication wavelength band were investigated. Highly stacked InAs QDs were grown on an InP(311)B substrate under Bi irradiation, and a broad-area laser was fabricated. In the lasing operation, the threshold currents were almost the same, regardless of Bi irradiation at room temperature. These QD lasers were operated at temperatures between 20 and 75°C, indicating the possibility of high-temperature operation. In addition, the temperature dependence of the oscillation wavelength changed from 0.531â nm/K to 0.168â nm/K using Bi in the temperature range 20-75°C.
Assuntos
Pontos Quânticos , Temperatura , Bismuto , LasersRESUMO
This Letter describes a high-speed yet simple fiber-wireless-fiber system in the 100-GHz band using a photonics-enabled receiver and optical phase modulator. At the antenna site, a millimeter-wave signal is down-converted to the microwave band using an electronic mixer with a local oscillator signal generated remotely using photonic technology. The down-converted signal is converted to an optical signal using an optical phase modulator. At the receiver, a simple direct detection of the phase-modulated signal is performed using optical filtering technology. To demonstrate the proof-of-concept, we successfully transmitted a 64-quadrature amplitude modulation orthogonal frequency-division multiplexing signal with a record line rate of 80 Gb/s (net data rate of 55 Gb/s) over a system consisting of two radio-over-fiber links and a 5 m wireless link in the 100-GHz band. The proposed system with simple antenna sites and optical transceivers can facilitate the deployment of ultra-dense small cells in high-frequency bands in beyond-5G networks.
RESUMO
Tiny mismatches in timing, phase, and/or amplitude between in-phase (I) and quadrature (Q) tributaries in an electro-optic IQ modulator, namely IQ imbalance, can severely affect high baud-rate and/or high modulation-order signals in modern coherent optical communications systems. To maintain such analog impairment within the tight penalty limit over wavelength and temperature during the product lifetime, in-service in-field monitoring and calibration of the IQ imbalance, including its frequency dependence, become increasingly important. In this study, we propose a low-complexity IQ monitoring technique based on direct detection with phase retrieval called a single-pixel optical modulation analyzer (SP-OMA). By reconstructing the optical phase information lost during the detection process computationally via phase retrieval, SP-OMA facilitates the in-service in-field monitoring of the frequency-dependent imbalance profile without sending dedicated pilot tones and regardless of any receiver/monitor-side IQ imbalance. The feasibility of SP-OMA is demonstrated both numerically and experimentally with a 63.25-Gbaud 16QAM signal.
RESUMO
Dedicated indoor radio access network (RAN, such as C-RAN with fronthaul) will be in urgent demand for 5G and beyond ((B)5G), as it becomes more difficult for outdoor base stations to serve indoor mobile/IoT terminals due to the loss issue induced by higher carrier frequency. One cost-effective and time-saving strategy for indoor (B)5G RAN is to reuse the legacy multimode fibers (MMF) deployed in buildings and premises worldwide. In this work, we introduce the concept of indoor (B)5G fronthaul over legacy MMF based on analog-to-digital-compression (ADX), termed as ADX-RoMMF. Enabled by ADX for MIMO data compression, both high radio signal fidelity and fronthaul bandwidth efficiency can be achieved, which alleviates the limitation of low MMF bandwidth-distance product and supports decent indoor coverage. Meanwhile, its digital nature is highly compatible with low-cost optical transceivers (with nonlinearity and/or imperfection) and packet-based fronthaul networking such as time-sensitive networking. Furthermore, the ultralow latency of ADX processing meets the requirement of low-delay (B)5G fronthauling. We experimentally demonstrate an ADX-RoMMF link serving 16-channel MIMO signals with NR-class bandwidth and 1024QAM, leveraging a real-time ADX prototyped on a single-chip field-programmable radio platform. Results show that this 32Gb/s CPRI-equivalent rate can be transported over MMF distance of 850m within 1024QAM EVM requirement, which is 4-fold larger than that of conventional fronthaul compression scheme. Moreover, 500ns ADX latency overhead is also verified.
RESUMO
We experimentally investigate the complex dynamics of a multi-mode quantum-dot semiconductor laser with time-delayed optical feedback. We examine a two-dimensional bifurcation diagram of the quantum-dot laser as a comprehensive dynamical map by changing the injection current and feedback strength. We found that the bifurcation diagram contains two different parameter regions of low-frequency fluctuations. The power-dropout dynamics of the low-frequency fluctuations are observed in the sub-GHz region, which is considerably faster than the conventional low-frequency fluctuations in the MHz region. Comparing the dynamics of quantum-dot laser with those of single- and multi-mode quantum-well semiconductor lasers reveals that the fast low-frequency fluctuation dynamics are unique characteristics of quantum-dot lasers with time-delayed optical feedback.
RESUMO
We report the development of a superconducting acousto-optic phase modulator fabricated on a lithium niobate substrate. A titanium-diffused optical waveguide is placed in a surface acoustic wave resonator, where the electrodes for mirrors and an interdigitated transducer are made of a superconducting niobium titanium nitride thin film. The device performance is evaluated as a substitute for the current electro-optic modulators, with the same fiber coupling scheme and comparable device size. Operating the device at a cryogenic temperature (T = 8 K), we observe the length-half-wave-voltage (length-Vπ) product of 1.78 V·cm. Numerical simulation is conducted to reproduce and extrapolate the performance of the device. An optical cavity with mirror coating on the input/output facets of the optical waveguide is tested for further enhancement of the modulation efficiency. A simple extension of the current device is estimated to achieve an efficient modulation with Vπ = 0.27 V.
RESUMO
This Letter proposes a high-performance radio-over-fiber (RoF) system for high-speed and high-fidelity analog waveform transmission of radio signals in the millimeter-wave band in the uplink direction. At the antenna site, the system utilizes a newly fabricated low half-wave voltage broadband phase modulator to convert a millimeter-wave radio signal into an optical signal. At the receiver, by using photonic downconversion and optical filtering technology, a simple direct detection and downconversion of the signal to the microwave band can be achieved simultaneously. As a demonstration of proof of concept, we successfully transmitted a 1024-quadrature amplitude modulation (QAM) narrowband orthogonal frequency-division multiplexing signal at 38 GHz and a 60 Gb/s 64-QAM single-carrier signal at 26.5 GHz over a 20 km RoF system. The system is promising for facilitating the deployment of ultra-dense small cells in high-frequency bands in 5G and beyond networks.
RESUMO
As one of the promising multiplexing and multicarrier modulation technologies, Nyquist subcarrier multiplexing (Nyquist SCM) has recently attracted research attention to realize ultra-fast and ultra-spectral-efficient optical networks. In this paper, we propose and experimentally demonstrate optical subcarrier processing technologies for Nyquist SCM signals such as frequency conversion, multicast and data aggregation of subcarriers, through the coherent spectrum overlapping between subcarriers in four-wave mixing (FWM) with coherent multi-tone pump. The data aggregation is realized by coherently superposing or combining low-level subcarriers to yield high-level subcarriers in the optical field. Moreover, multiple replicas of the data-aggregated subcarriers and the subcarriers carrying the original data are obtained. In the experiment, two 5 Gbps quadrature phase-shift keying (QPSK) subcarriers are coherently combined to generate a 10 Gbps 16 quadrature amplitude modulation (QAM) subcarrier with frequency conversions through the FWM with coherent multi-tone pump. Less than 1 dB optical signal-to-noise ratio (OSNR) penalty variation is observed for the synthesized 16QAM subcarriers after the data aggregation. In addition, some subcarriers are kept in the original formats, QPSK, with a power penalty of less than 0.4 dB with respect to the original input subcarriers. The proposed subcarrier processing technology enables flexibility for spectral management in future dynamic optical networks.
RESUMO
To meet the ever-increasing bandwidth demands in the future broadband wireless networks, the millimeter-wave (mm-wave) frequency region is being actively perused, owing to its broad bandwidth and high frequencies. In this paper, a photonic mm-wave system is proposed and experimentally demonstrated based on the injection locking of a direct multilevel modulated laser to a spacing-tunable two-tone light. Since the mm-wave frequency of the generated signal is locked to the frequency spacing of the injected two-tone light, it shows better frequency stabilization than the schemes based on two free-running lasers. Moreover, by simply tuning the tone spacing, the mm-wave frequency could be easily re-configured, offering flexibility in the mm-wave signal generation. Instead of using complex and expensive optical modulators, the multilevel modulation on the mm-wave data carrier is implemented through the direct multilevel modulation of a laser and the injection locking. A 28 Gbps four-level pulse amplitude modulation (PAM4) is realized by biasing a 10 G-class laser at a current far from the threshold, providing a cost-effective and simple mm-wave generation scheme. In the experiment, a photonic approach to generating 28 Gbps PAM4 60 GHz/80 GHz mm-wave signals is experimentally demonstrated. A power penalty of less than 0.2 dB is observed for the filtered-out PAM4 signals with respect to the original PAM4. Besides, an ultra-low phase noise of up to -98 dBc/Hz is obtained for the mm-wave carriers after the injection locking. The proposed scheme possesses the flexibility and frequency stability of the mm-wave frequency, and also has low cost and implementation complexity.
RESUMO
Recently the ever-growing demand for dynamic and high-capacity services in optical networks has resulted in new challenges that require improved network agility and flexibility in order for network resources to become more "consumable" and dynamic, or elastic, in response to requests from higher network layers. Flexible and scalable wavelength conversion or multicast is one of the most important technologies needed for developing agility in the physical layer. This paper will investigate how, using a reconfigurable coherent multi-carrier as a pump, the multicast scalability and the flexibility in wavelength allocation of the converted signals can be effectively improved. Moreover, the coherence in the multiple carriers prevents the phase noise transformation from the local pump to the converted signals, which is imperative for the phase-noise-sensitive multi-level single- or multi-carrier modulated signal. To verify the feasibility of the proposed scheme, we experimentally demonstrate the wavelength multicast of coherent optical orthogonal frequency division multiplexing (CO-OFDM) signals using a reconfigurable coherent multi-carrier pump, showing flexibility in wavelength allocation, scalability in multicast, and tolerance against pump phase noise. Less than 0.5 dB and 1.8 dB power penalties at a bit-error rate (BER) of 10-3 are obtained for the converted CO-OFDM-quadrature phase-shift keying (QPSK) and CO-OFDM-16-ary quadrature amplitude modulation (16QAM) signals, respectively, even when using a distributed feedback laser (DFB) as a pump source. In contrast, with a free-running pumping scheme, the phase noise from DFB pumps severely deteriorates the CO-OFDM signals, resulting in a visible error-floor at a BER of 10-2 in the converted CO-OFDM-16QAM signals.
RESUMO
In this paper, we experimentally demonstrate simultaneous multichannel wavelength multicasting (MWM) and exclusive-OR logic gate multicasting (XOR-LGM) for three 10Gbps non-return-to-zero differential phase-shift-keying (NRZ-DPSK) signals in quantum-dot semiconductor optical amplifier (QD-SOA) by exploiting the four-wave mixing (FWM) process. No additional pump is needed in the scheme. Through the interaction of the input three 10Gbps DPSK signal lights in QD-SOA, each channel is successfully multicasted to three wavelengths (1-to-3 for each), totally 3-to-9 MWM, and at the same time, three-output XOR-LGM is obtained at three different wavelengths. All the new generated channels are with a power penalty less than 1.2dB at a BER of 10(-9). Degenerate and non-degenerate FWM components are fully used in the experiment for data and logic multicasting.
Assuntos
Amplificadores Eletrônicos , Eletrônica , Fenômenos Ópticos , Pontos Quânticos/química , Semicondutores , Processamento de Sinais Assistido por Computador , Lógica , Análise de OndaletasRESUMO
Self-assembled quantum dots (QDs) are potential candidates for photoelectric and photovoltaic devices, because of their discrete energy levels. The characterization of QDs at the atomic level using a multimodal approach is crucial to improving device performance because QDs are nanostructures with highly correlated structural parameters. In this study, scanning transmission electron microscopy, geometric phase analysis, and atom probe tomography were employed to characterize structural parameters such as the shape, strain, and composition of self-assembled InAs-QDs with InGaAlAs spacer layers. The measurements revealed characteristic AlAs-rich regions above the QDs and InAs-rich regions surrounding the QD columns, which can be explained by the relationship between the effect of strain and surface curvature around the QD. The methodology described in this study accelerates the development of future QD devices because its multiple perspectives reveal phenomena such as atomic-scale segregations and allow for more detailed discussions of the mechanisms of these phenomena.
RESUMO
An InGaAs quantum dot (QD) laser diode with 19-stacked QDs separated by 20 nm-thick GaAs spacers was fabricated using an ultrahigh-rate molecular beam epitaxial growth technique, and the laser characteristics were evaluated. A 19-stacked simple broad area QD laser diode was lased at the 1000 nm waveband. A net modal gain of 103 cm(-1) was obtained at 2.25 kA/cm(2), and the saturated modal gain was 145.6 cm(-1); these are the highest values obtained to our knowledge. These results indicate that using this technique to highly stack QDs is effective for improving the net modal gain of QD lasers.
RESUMO
Polarization division multiplexing (PDM) and wavelength division multiplexing (WDM) are essential techniques for enhancing the capacity of photonic networks and facilitating the efficient use of optical frequency resources. 2 PDM × 2 WDM × 10 Gbps error-free simultaneous transmissions in the 1.0-µm waveband and C-waveband are successfully demonstrated for the first time using an ultra-broadband photonic transport system over a 14.4-km-long holey fiber transmission line.
RESUMO
A wide wavelength tunable quantum dot (QD) external cavity laser operating in the 1.31-µm waveband with a narrow line-width is successfully demonstrated. A high-density, high-quality InAs/InGaAs QD optical gain medium for the 1.31-µm waveband was obtained using a sandwiched sub-nano separator growth technique. A wide wavelength tunability of 1.265-1.321 µm and a narrow line-width of 210 kHz were successfully achieved using a compact and robust external cavity system constructed with multiple optical band-pass and etalon filters for active optical mode selection. The laser also achieved an error-free 10-Gb/s photonic data transmission over an 11.4-km-long holey fiber.
RESUMO
An ultra-broadband photonic transport system has been developed to expand the usable wavelength bandwidth for optical communication. Simultaneous 3 x 10-Gbps error-free photonic transmissions are demonstrated in the 1-microm, C-, and L-wavebands by using the ultra-broadband photonic transport system over a 5.4-km-long holey fiber transmission line.
RESUMO
To open up a 1-microm waveband for photonic transport systems, we developed a hybrid and harmonically mode-locked semiconductor laser (MLL) that can transmit return-to-zero (RZ) optical signals at data rates on the order of gigabits per second. A single-mode hole-assisted fiber (HAF) was also developed for use as a 1-microm waveband signal transmission line. A stable optical pulse train with a repetition rate of 9.953 GHz, pulse width of 22 ps, and low timing jitter of 120 fs was obtained from a 1035-nm harmonically MLL. With these devices, we successfully demonstrated 1-microm waveband error-free transmission of a high-speed 10-Gbps RZ signal over a long distance of 7 km.
RESUMO
We demonstrate tunable all-optical pulse compression and stretching via doublet Brillouin gain lines in an optical fiber. Tunable pulse compression or a stretching ratio of 1.47-0.43 accompanying a time delay is achieved by controlling the separation between two gain lines, for an input pulse train with a 40 ns width and a repetition rate of 5 MHz, in a 4 km silica fiber with a fixed pump power of 88.1 mW. The limitation of this pulse compressor or stretcher is also discussed.