Determination of volatile compounds in white brine cheese and ultrafiltered cheese during ripening and shelf-life using nano-adsorbent fibers.

In this study, determination of aromatic compounds in cheese samples was performed by headspace solid-phase microextraction (HS-SPME) using a new adsorbent as a novel coated fiber in combination with a gas chromatography/mass spectrometry or flame ionization detector to evaluate the changes during ripening. Brine and ultrafiltrated (UF) cheese were sampled via HS-SPME and analyzed by gas chromatography/mass spectrometry. Polysulfone and mesoporous carbon nitride were used as two types of fibers for coating. The results showed that the pH had significant decreased during the 120 days for brine cheese (p < 0.001), and during the 90 days (p < 0.001) for UF cheese. Acidity was relatively stable during the ripening period for both cheeses (p > 0.05). Protein content decreased during the ripening period for both cheeses (p < 0.001). Moisture content also significantly decreased during the ripening period for both cheeses (p < 0.001). 74 compounds were identified in brine cheese and 27 major components in UF cheese. Fatty acids were the predominant components, followed by aldehydes (n: 17, 22.9%), alcohol (n; 12, 16.2%), ester (n: 11, 14.8%), alkane (n: 7, 9.4%), and ketone (n: 6, 8.1%) for white brine cheese, while for UF cheese fatty acid (n: 12, 44.4%) and aldehyde (n: 5, 18.5%), alcohol (n: 3, 11.1%), ketone (n: 3, 11.1%), ester (n: 2, 7.4%) and alkane (n: 1, 3.7%).

Green dispersive solid-phase microextraction of melamine using crosslinked beta-cyclodextrin with citric acid followed by high-performance liquid chromatography.

In this research, a green approach for dispersive solid phase microextraction was introduced for the extraction and determination of melamine in various matrices such as infant formula and hot water in a melamine bowl. In this way, a natural polar polymer called ß-cyclodextrin has been cross-linked with citric acid to create a water-insoluble adsorbent. The extraction was carried out by dispersion of the sorbent into the sample solution. The effective parameters on the extraction efficiency of the melamine, including ion strength, extraction time, sample volume, amount of absorbent, pH, type of desorption solvent, desorption time, and desorption solvent volume were optimized by one variable at a time approach. Under the optimal conditions, the method showed a good linear dynamic range for melamine in the range of 1-1000 µg/L with a coefficient of determination of 0.9985. The obtained limit of detection was 0.3 µg/L. The intra-day and inter-day relative standard deviations (n = 3) were 3.1% and 3.2% respectively. Lastly, this technique was applied to extract and determine the analyte in a melamine bowl and infant formula with acceptable and satisfactory results.

Electrophoretically deposited sulfonated poly(styrene-co-divinylbenzene) on a screw for microextraction of cationic dyes from aqueous solutions.

In the present work, a novel solid-phase microextraction on a screw (MES) was employed to extract cationic dyes (malachite green, methylene blue, and rhodamine B) from food samples and fish breeding pool water. The sulfonated poly(styrene-co-divinylbenzene) was electrophoretically deposited on the surface of the grooves of a screw. Then the screw was placed inside a silicon tube as a holder to create a channel to run a test solution through it. The extracted dyes on the coated screw were eluted by a suitable eluent. High-performance liquid chromatography with an ultraviolet/visible detector was utilized for the separation and analysis of the analytes. The effective parameters of the analyte extraction efficiency were optimized. Under optimum conditions, the limits of detection were 0.15 µg/L, and calibration curves were linear in the range of 0.50-250.00 µg/L, with coefficients of determination > 0.989 for all studied dyes. The relative standard deviations of intra and inter-day (n = 3) were in the range of 2.8%-7.0% and 7.0%-9.5%, respectively. The MES was applied as a simple and repeatable method with acceptable relative recoveries (82.0%-103.0%) for the determination of cationic dyes in grape nectar, ice pop, jelly powder, and fish breeding pool water.

A miniaturized analytical system with packed epoxy-functionalized mesoporous organosilica for copper determination using a customized Android-based software.

A smartphone-assisted determination of copper ions is introduced by using a down-scaled microfluidic mixer. The system was coupled with a micro-column packed with a periodic mesoporous organosilica (PMO) material for preconcentration of copper ions. Copper ions were reduced to Cu(I) on-chip to selectively form an orange-colored complex with neocuproine. A novel Android-based software was made to determine the color change of the adsorbent by analyzing red-green-blue (RGB) components of images from the packed PMO material. Four porous framework materials with high porosity and chemical stability were synthesized and compared for the extraction of the Cu-neocuproine complex. The main parameters influencing the complex extraction efficiency were optimized. The analytical performance of the method showed limit of detection and quantification of 0.2 µg L-1 and 0.5 µg L-1, respectively. The accuracy and precision of the method were determined as recovery > 92% and relative standard deviations < 5.2% at medium concentration level (n = 5). Due to accumulation of the retained analyte in a single point and elimination of the stripping step, the RGB-based method showed sensitivity and precision higher than inductively coupled plasma-atomic emission spectrometry (ICP-AES) for determination of copper ions. To investigate the applicability of the method, six different water samples were analyzed. The t-test on the data showed that the method has no significant difference when compared with ICP-AES determination.

Functionalized carbon nanotube-polyaniline composite coating for on-line microextraction on a screw coupled with high performance liquid chromatography to determine opium alkaloids.

A novel and efficient on-line microextraction on a screw coupled with high-performance liquid chromatography with an ultraviolet-visible detector was developed to extract and determine trace quantities of five opium alkaloids. All detections of the analytes were achieved at 210 nm. The surface of the screw grooves was electrochemically coated with the carbon nanotubes-COOH/polyaniline composite. The surface characterization was assessed by Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The prepared screw was inserted into a cartridge of a guard column, and then the constructed microextraction on a screw device was placed in the loop of a six-port HPLC injection valve. The parameters affecting the extraction efficiency of the analytes were optimized using the one variable-at-a-time method. The effective parameters for the extraction efficiency of the analytes, including sample volume, extraction time, sampling flow rate, desorption solvent type, ionic strength, and pH were investigated and optimized. Under optimal conditions, the detection limits were 3-10 µg L-1, and the linear dynamic ranges were 10-2000 µg L-1 with a coefficient of determination greater than 0.9940. The inter-day and intra-day (n = 3) relative standard deviations were less than 7% and 5%, respectively. The proposed method was simple and reproducible, with an acceptable relative recovery (90-108%) for determining opium alkaloids in water and urine samples.

Ethane-bridge periodic mesoporous organosilica materials as a novel fiber coating in headspace solid-phase microextraction of phthalate esters from saliva and PET container samples.

The current study presents a periodic mesoporous organosilica (PMO) with a high surface area and uniform-porosity material. The PMO materials were successfully synthesized and modified. The resultant material was characterized by different characterization techniques. The prepared PMO was immobilized on a stainless steel wire surface and was evaluated for headspace solid-phase microextraction of the ultra-trace amount of phthalate esters from saliva and polyethylene terephthalate containers which were in contact with hot and cold water. Separation and determination of the phthalate esters (PEs) were performed by the GC-FID and GC-MS instruments. The key parameters affecting the extraction efficiencies, including extraction temperature, extraction time, ionic strength, and desorption temperature and time, were investigated and optimized. Under optimum conditions, the repeatability for one fiber (n = 7) was 4.8-8.7%, and fiber-to-fiber reproducibility (n = 3) was 7.5-10.6% for the extracted compounds. The limits of detection of the developed method for the studied compounds were between 0.01 and 1 µg L-1. The results showed suitable coefficients of determination (R2 ≥ 0.99) for all of the analytes in the 0.05-300 µg L-1 calibration range. Acceptable recovery values of 91-107%, 82-110%, and 98-104% were obtained in saliva, polyethylene terephthalate containers hot water, and cold water, respectively.

Microextraction of organophosphorus pesticides on a screw coated with PAN/calcined ZnMgAl-LDH electrospun nanofibers.

The present research is an attempt to expand the recently reported microextraction on screw method. For this purpose, polyacrylonitrile/calcined ZnMgAl-LDH nanofiber was fabricated by the electrospinning technique on the surface of a screw. It was applied to the extraction of organophosphorus pesticides (OPP) from agricultural samples. The separation and determination of OPPs were carried out by gas chromatography-mass spectrometry. The characterization of the fabricated nanofiber was performed utilizing Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction instruments. Effective parameters on the extraction efficiency of the analytes including sample pH, ionic strength, sample flow rate and number of cycles, type, volume, and flow rate of desorption solvent were optimized by one-variable-at-a-time method. Under optimized conditions, the limits of detection were 0.03 and 0.07 µg L-1 for diazinon and chlorpyrifos, respectively. This method showed wide linearity in the range 0.10-1000 µg L-1 for diazinon and 0.25-1000 µg L-1 for chlorpyrifos with R2 > 0.996. The intra- and inter-day precisions (RSD%, n = 3) were ≤ 6.4% and ≤ 7.7%, respectively. Also, RSD% values less than 11.1% were obtained for screw-to-screw reproducibility. The applicability of the method for the extraction and determination of the analytes in complex agricultural environments such as cabbage, potato, tomato, cucumber, and beetroot was investigated. The results led to acceptable relative recoveries in the range 81.0-108.2%.

Applications of porous frameworks in solid-phase microextraction.

Porous frameworks are a term of attracting solid materials assembled by interconnection of molecules and ions. These trendy materials due to high chemical and thermal stability, well-defined pore size and structure, and high effective surface area gained attention to employ as extraction phase in sample pretreatment methods before analytical analysis. Solid-phase microextraction is an important subclass of sample preparation technique that up to now different configurations of this method have been introduced to get adaptable with different environments and analytical instruments. In this review, theoretical aspect and different modes of solid-phase microextraction method are investigated. Different classes of porous frameworks and their applications as extraction phase in the proposed microextraction method are evaluated. Types and features of supporting substrates and coating procedures of porous frameworks on them are reviewed. At the end, the prospective and the challenges ahead in this field are discussed.

Synthesis of an organic-inorganic hybrid absorbent for in-tube solid-phase microextraction of bisphenol A.

This research is an application of fiber-in-tube solid-phase microextraction followed by high-performance liquid chromatography with UV detection for the extraction and determination of trace amounts of bisphenol A. Nanomagnetic Fe3 O4 was formed on the surface of polypropylene porous hollow fibers to increase the surface area and then it was coated with polystyrene. The introduction of polystyrene improves the surface hydrophobicity and is an appropriate extractive phase because it is highly stable in aquatic media. The extraction was carried out in a short capillary packed longitudinally with the fine fibers as the extraction medium. Extraction conditions, including extraction and desorption flow rates, extraction time, pH, and ionic strength of the sample solution, were investigated and optimized. Under optimal conditions, the limit of detection was 0.01 µg/L. This method showed good linearity for bisphenol A in the range of 0.033-1000 µg/L, with the coefficient of determination of 0.9984. The inter- and intraday precisions (RSD%, n = 3) were 7.9 and 6.3%, respectively. Finally, the method was applied to analysis of the analyte in thermal papers, disposable plastic cups, and soft drink bottles.

Application of HKUST-1 metal-organic framework as coating for headspace solid-phase microextraction of some addictive drugs.

In the present study, a copper-based metal-organic framework (HKUST-1) was used first time for preconcentration trace amounts of addictive drugs in biological samples. HKUST-1 was synthesized and coated onto the surface of stainless steel wire. The prepared coating was used in headspace solid-phase microextraction method coupled with gas chromatography-mass spectrometry for preconcentration and determination of some addictive drugs in biological fluids. Prepared coating shows good extraction efficiency due to large surface area, and π-π stacking interaction with selected analytes. Under optimum conditions, the method was validated with a reasonable determination coefficient (R2  > 0.9961) and suitable linear dynamic range (0.5-1000 µg L-1 ). Also, the limits of detections were obtained in the range of 0.1-0.4, 0.2-0.6, and 0.4-0.7 µg L-1 for water, urine, and plasma samples, respectively. The limits of quantification of present method were obtained in the range 0.5-1.3, 0.7-1.5, and 1.0-1.9 µg L-1 in water, urine, and plasma samples, respectively. The intra-day and inter-dye single fiber and fiber to fiber relative standard deviations were observed in the range 3.0-13.9% and 3.5-12.3%, respectively. Finally, the present method was applied for the determination of the drugs in biological samples.

Electrodeposition of poly-ethylenedioxythiophene-graphene oxide nanocomposite in a stainless steel tube for solid-phase microextraction of letrozole in plasma samples.

Coated stainless steel was used as an in-tube solid-phase microextraction for the extraction of letrozole from plasma samples. The coating process on the inner surface of the stainless steel was conducted by a simple electrodeposition process. The coated composite was prepared from 3,4-ethylenedioxythiophene and graphene oxide. In this composite, graphene oxide acts as an anion dopant and sorbent. The coated nanostructured polymer was characterized using different techniques. The operational factors affecting the extraction process, including pH, adsorption, and desorption time, the recycling flow rate of the sample solution, sample volume, desorption solvent type and its volume, and ionic strength were optimized to achieve the best extraction efficiency of the analyte. The total extraction time including adsorption and desorption steps was about 15.0 min. The developed method demonstrated a linear range of 5.0-1500.0 µg/L with a limit of detection of 1.0 µg/L. The repeatability of the developed extraction approach in terms of intraday, interday, and fiber to fiber was attained in the range of 4.9-8.3%. After finding the optimal conditions, the potential of the described approach for letrozole quantitation was investigated in plasma samples, and satisfactory results were obtained.

Polyoxomolybdate368 /polyaniline nanocomposite as a novel fiber for solid-phase microextraction of antidepressant drugs in biological samples.

A novel solid-phase microextraction fiber was synthesized by coating a stainless steel wire with polyoxomolybdate368 /polyaniline as a sorbent aimed at extraction of amitriptyline, nortriptyline, and doxepin as antidepressant drugs from urine and blood samples. The polyoxomolybdate368 /polyaniline composite coating was applied using electropolymerization process under constant potential. This composition leads to enhanced extraction efficiency of the fiber. Scanning electron microscopy images show that huge three-dimensional structures of polyoxomolybdate368 in composite induced more non-smooth and porous fiber. In order to optimize of the extraction process, a series of variables including concentration of the composite materials, coating thickness, pH, extraction time, salt addition, and stirring rate was investigated and optimum conditions were determined. Analysis of surface morphology and chemical composition was performed. High-performance liquid chromatography was used for separation and evaluation of mentioned antidepressant drugs from the matrixes. The experiments indicated a detection limits of <0.2 ng/L and a linear dynamic range of 0.3-100 ng/L (R2  > 0.994). The relative recovery values were found to be in the range of 92-98%. It was concluded that the purposed fiber is highly efficient in analyzing traces of antidepressant drugs in urine and blood.

Developing a novel packed in-tube solid-phase extraction method for determination ∆ 9-tetrahydrocannabinol in biological samples and cannabis leaves.

A novel plate-like nano-sorbent based on copper/cobalt/chromium layered double hydroxide was synthesized by a simple coprecipitation method. The synthesized nanoparticels were introduced into a stainless steel cartridge using a dry packing method. Then, the packed cartridge was introduced as a novel on-line "packed in-tube" configuration and followed by high performance liquid chromatography for the determination of trace amounts of ∆ 9-tetrahydrocannabinol from biological samples and cannabis leaves. The as-prepared sorbent exhibited long lifetime, good chemical stability, and high anion-exchange capacity. Several important factors affecting the extraction efficiency, such as extraction and desorption times, pH of the sample solution and flow rates of the sample and eluent solutions, were investigated and optimized. Under optimized conditions, this method showed good linearity for ∆ 9-tetrahydrocannabinol in the ranges of 0.09-500, 0.3-500, and 0.4-500 µg/L with coefficients of determination of 0.9999, 0.9991, and 0.9994 in water, serum and plasma samples, respectively. The inter- and intra-assay precisions (n = 3) were respectively in the ranges of 1.8-4.6% and 1.9-4.0% at three concentration levels of 10, 50, and 100 µg/L. The limits of detection were also in the range of 0.02-0.1 µg/L.

3D Printing in analytical sample preparation.

In the last 5 years, additive manufacturing (three-dimensional printing) has emerged as a highly valuable technology to advance the field of analytical sample preparation. Three-dimensional printing enabled the cost-effective and rapid fabrication of devices for sample preparation, especially in flow-based mode, opening new possibilities for the development of automated analytical methods. Recent advances involve membrane-based three-dimensional printed separation devices fabricated by print-pause-print and multi-material three-dimensional printing, or improved three-dimensional printed holders for solid-phase extraction containing sorbent bead packings, extraction disks, fibers, and magnetic particles. Other recent developments rely on the direct three-dimensional printing of extraction sorbents, the functionalization of commercial three-dimensional printable resins, or the coating of three-dimensional printed devices with functional micro/nanomaterials. In addition, improved devices for liquid-liquid extraction such as extraction chambers, or phase separators are opening new possibilities for analytical method development combined with high-performance liquid chromatography. The present review outlines the current state-of-the-art of three-dimensional printing in analytical sample preparation.

Reduced graphene-decorated covalent organic framework as a novel coating for solid-phase microextraction of phthalate esters coupled to gas chromatography-mass spectrometry.

Schiff base network-1 (SNW-1), as a new generation of covalent organic frameworks (COFs), was synthesized and modified by fabrication of a composite with graphene oxide (GO). The fabricated nanocomposite was characterized with FT-IR spectroscopy, XRD, FE-SEM, EDX, TGA, and the nitrogen adsorption-desorption technique. Characterization results showed that SNW-1 can reduce GO during the fabrication procedure and produce an effective and stable nanocomposite. This nanocomposite was deposited on the surface of a stainless steel wire via a single phase inversion method with the help of polyethersulfone, as a porous adhesive material. This robust and stable coating was used for head space solid-phase microextraction of phthalate esters (PhEs) from water samples. Determination of the PhEs was performed with gas chromatography coupled to mass spectrometry. SNW-1 is N-rich, and reduced-GO is full of hexagonal conjugated rings. Therefore, due to hydrogen binding and π-interaction, the coating has a high tendency to PhEs. Effective adsorption and desorption parameters were optimized. The performance of the method was evaluated in terms of linear ranges (LRs from 0.05 to 100 µg L-1 with R2 ≥ 0.9942) and limits of detection (LODs in the range of 0.01-0.50 µg L-1). The average repeatability and fiber-to-fiber reproducibility were 6.8% and 9.2%, respectively. The method was employed to trace determination of PhEs in drinking water and pickled cucumber solution with good recovery (80.5-111.0%) and reliable reproducibility (5.5-9.5%). Graphical abstract Schematic representation of headspace-solid phase microextraction (HS-SPME) of phthalate esters (PhEs) from pickled cucumber solution and determination with gas chromatography-mass spectrometry (GC-MS).

Accordion-like Ti3C2Tx MXene nanosheets as a high-performance solid phase microextraction adsorbent for determination of polycyclic aromatic hydrocarbons using GC-MS.

Two dimensional accordion-like Ti3C2Tx MXene, where Tx represents surface termination groups such as -OH, -O-, and -F, is synthesized by selective etching of aluminum layers from Ti3AlC2. This manuscript reports on the adsorption of organic molecules from head-space and aqueous environments containing Ti3C2Tx, a representative of the MXene family. Ti3C2Tx coated by gluing method on a stainless steel wire was successfully utilized as a highly sensitive and stable head-space solid-phase microextraction (SPME) fiber. A SPME method with the MXene as the adsorbent combined with gas chromatography with MS detector was used to determine the polycyclic aromatic hydrocarbons (PAHs) in water samples. Low detection limits in the range of 0.2-5 ng L-1, wide linearity and good reproducibility (RSD = 4.6 to 7.4% for n = 6) under the optimized extraction conditions was achieved. Finally, the MXene coated fiber was successfully used for the determination of PAHs in real water samples. The relative recoveries for six PAHs are from 91.3-105.0%, which proved the applicability of the method. Also, melamine was selected as a polar analyte and it has been shown that Ti3C2Tx MXene has good capability in extraction of melamine (the extraction recovery for melamine = 80.1%) from aqueous media by dispersive micro solid-phase extraction. Graphical abstractTwo dimensional accordion-like Ti3C2 MXene was synthesized by selective etching of aluminum layers from Ti3AlC2. Ti3C2 MXene was employed as solid phase microextraction fiber coating for the extraction of polycyclic aromatic hydrocarbons from water samples.

An electrodeposited terephthalic acid-layered double hydroxide (Cu-Cr) nanosheet coating for in-tube solid-phase microextraction of phthalate esters.

A CuCr-layered double hydroxide nanosheet intercalated with terephthalic acid (TPA/LDH) was introduced as a coating for the in-tube solid phase microextraction (IT-SPME). The coating was placed on the inner surface of a stainless steel tube by using two-electrode electrodeposition. The sorbent was characterized by X-ray diffraction, scanning electronic microscopy, and Fourier transform infrared spectroscopy. The TPA/LDH coating, compared to a nitrate-LDH coating, exhibits enhanced extraction efficiency, long lifetime, good mechanical stability, and a large specific surface. The method was used for the extraction, preconcentration, and subsequent HPLC-based determination of dimethyl phthalate (DMP), dibutyl phthalate (DBP), diallyl phthalate (DAP), and diethylhexyl phthalate (DEHP). The effects of pH value of the solution, salt concentration, extraction and desorption conditions, and the effect of the alcohol content of the solution on the extraction efficiency were optimized. Under optimal conditions, the response is linear in the 0.05 to 1000 µg L-1 ester concentration range, and the limits of detection (at S/N = 3) range between 0.01 to 0.1 µg L-1. The inter- and intra-assay precisions (RSD%, for n = 3) range from 3.8 to 6.8% and from 3.5 to 5.7%, respectively. The method was successfully applied to the determination of four phthalate esters in different beverage samples. Graphical abstractA CuCr-layered double hydroxide nanosheet intercalated with terephthalic acid was used as a coating for in-tube solid phase microextraction of some phthalate esters from beverage samples.

Simultaneous extraction of acidic and basic drugs via on-chip electromembrane extraction using a single-compartment microfluidic device.

In this study, a new chip was designed for simultaneous extraction of acidic and basic drugs by a single chamber on-chip electromembrane extraction (CEME) followed by high performance liquid chromatography. Diclofenac (DIC) and nalmefene (NAL) were selected as acidic and basic model analytes, respectively. In this device, simultaneous extraction of the analytes was carried out using a single compartment. The chip was composed of three PMMA (polymethyl methacrylate) parts with sandwiched structures and carved spiral microfluidic channels in each part. The middle part was cut and an "M" pattern provided interfaces for contact between the sample solution flow and two porous polypropylene sheets on both sides. Two other parts had the same spiral channels dedicated to the corresponding acceptor phases of the acidic and basic analytes and were located at both sides. Each polypropylene sheet was impregnated with the appropriate organic solvent for the acidic and basic analytes. Two platinum electrodes connected to a power supply were mounted at the bottom of the acceptor channels. These electrodes provided the electrical fields across SLMs to extract the analytes from a single sample flow. When the extraction was completed, the acceptor solutions were collected, mixed, and then injected into the chromatographic system. The effective parameters on the extraction efficiency were investigated and optimized. Under the optimal conditions, the calibration curves were linear in the range of 9.0-500 µg L-1 for NAL and 11.0-500 µg L-1 for DIC with the coefficient of determination (R2) higher than 0.9913. The relative standard deviations (RSD%) based on five replicate measurements were less than 6.3%. LOD values were 4.0 and 3.0 µg L-1 for DIC and NAL, respectively. Finally, the method was successfully applied to determine DIC and NAL in the human urine samples and satisfactory results were obtained (recovery ≥90).

Extraction of antidepressant drugs in biological samples using alkanol-based nano structured supramolecular solvent microextraction followed by gas chromatography with mass spectrometric analysis.

In the present study, a supramolecular solvent was formed from reverse micelle aggregates of octanol. The proposed supramolecular solvent was used for rapid extraction of some antidepressants drugs including amitriptyline, imipramine, desipramine, maprotiline, sertraline, and doxepin from biological samples. Alkanol-based supramolecular solvents have a unique array of physicochemical properties, making them a very attractive alternative to replace organic solvents in analytical extractions. The parameters affecting the extraction of target analytes (i.e., the volume of tetrahydrofuran and octanol as the major components comprising the supramolecular solvent, chain length of alkanols, sample solution pH, salt addition, and ultrasonic time) were investigated and optimized by factor by factor optimization method. Under the optimum conditions, preconcentration factors of 470, 490, 460, 385, 370, and 430 were obtained for amitriptyline, doxepin, imipramine, desipramine, maprotiline, and sertraline, respectively. The linear ranges and coefficients of determination (R2 ) were obtained in the range of 0.01-100 µg/L and 0.9974-0.9991, respectively. Also the limits of detection (S/N = 3) of 0.003-0.03 µg/L, and precisions (n = 5) of 4.9-8.9% were calculated. Finally, the method was successfully applied for the extraction of antidepressant drugs in biological samples, and relative recoveries in the range of 91-102% were obtained.

Chitosan-based sorbent for efficient removal and extraction of ciprofloxacin and norfloxacin from aqueous solutions.

Nanosheets prepared from magnesium oxide, chitosan and graphene oxide (MgO/Chit/GO) were hydrothermally synthesized and used as a sorbent for removal of ciprofloxacin and norfloxacin from aqueous solutions. Residual antibiotics in sample were determined by HPLC/UV instrument. The sorbent was characterized by FTIR, XRD, BET, SEM, and TEM. Its high adsorption capacity is attributed to the high surface area (294 m2.g-1) as compared to bare MgO/chit or bare GO. The pore size of the mesoporous sorbent typically is 15 Å. The adsorption isotherms for the two model antibiotics studied (norfloxacin, ciprofloxacin) can be described with the Langmuir model, and the maximum adsorption capacities are 1111 and 1000 mg.g-1 for ciprofloxacin and norfloxacin, respectively. The analysis of the kinetic data revealed that the synthesized sorbent followed pseudo-second-order kinetics and the maximum equilibrium was at over 120 and 150 min for ciprofloxacin and norfloxacin, respectively. Therefore, it is introduced as an economical, eco- friendly, and high-performance sorbent for removal of antibiotics from aqueous solutions. Graphical abstract Schematic presentation of dispersion of magnesium oxide/chitosan/graphene oxide (MgO/chit/GO) nanosheets in waste water for removal of ciprofloxacin and norfloxacin as water pollutants.