RESUMO
Fourier ptychographic microscopy (FPM) is used to achieve high resolution and a large field of view. However, traditional FPM image reconstruction methods often yield poor image quality when encountering out-of-focus issues during reconstruction. Therefore, this study proposes a defocus-distance regression network based on convolutional neural networks. In an experimental validation, the root-mean-square error calculated from 1000 sets of predicted and true values was approximately 6.2 µm. The experimental results suggest that the proposed method has good generalization, maintains high accuracy in predicting defocus distances even for different biological samples, and extends the imaging depth-of-field of the FPM system by a factor of more than 3.
RESUMO
High-power femtosecond pulses delivered at a high-repetition rate will aid machining throughput and improve signal-to-noise ratios for sensitive measurements. Here we demonstrate a Kerr-lens mode-locked femtosecond Yb:YAG ring-cavity thin-disk oscillator with a multi-pass scheme for the laser beam. With four passes through the thin disk, 175-fs pulses were delivered from the oscillator at an average power of 71.5â W and a repetition rate of 65.3â MHz. The corresponding intra-cavity peak power of 110â MW is ample for intra-cavity nonlinear conversion into more exotic wavelength ranges. With six passes, the average output power reached 101.3â W. To the best of our knowledge, this is the highest average output power of any mode-locked ring laser. These results confirm the viability of using multi-pass configuration on a thin-disk ring oscillator for high-throughput femtosecond applications.
RESUMO
Femtosecond optical vortices with a phase singular point have diverse applications such as microscopic particles manipulation, special-structure micro-processing and quantum information. Raising the number of singularity points can provide additional dimensions of control. Here we report for what we believe is the first time the generation of femtosecond optical vortices with multiple (two and five) singularities directly from a laser oscillator. The average powers and pulse durations of the resulting vortex pulses are several hundred milliwatts and less than 300 fs, respectively. This work represents an innovate way for obtaining femtosecond multi-vortices, opening the way to the further studies of optical vortex crystals and their applications.
RESUMO
We report the generation of high-order transverse modes from a Kerr-lens mode-locked femtosecond laser. Two different orders of Hermite-Gaussian modes were realized by non-collinear pumping, which were converted into the corresponding Laguerre-Gaussian vortex modes using a cylindrical lens mode converter. The mode-locked vortex beams, with an average power of 1.4 W and 0.8 W, contained pulses as short as 126 fs and 170 fs at the first and second Hermite-Gaussian mode orders, respectively. This work demonstrates the possibility of developing Kerr-lens mode-locked bulk lasers with various pure high-order modes and paves the way for generating ultrashort vortex beams.
RESUMO
Ultrafast ring-cavity thin-disk oscillators combine high output power with the flexibility of generating output either unidirectionally or bidirectionally. Here, we report a Kerr-lens mode-locked ring-cavity Yb:YAG thin-disk oscillator delivering unidirectional 89-fs pulses by inducing additional spectral broadening with nonlinear plates. This is the shortest pulse duration for a ring-cavity mode-locked thin-disk oscillator. Bidirectional mode-locking was also realized. These results lay the foundation for the more efficient generation of high-order harmonics at MHz repetition rates and high-power dual frequency combs.
RESUMO
Interferometry is a relative measurement method for optical surface testing, and thus its testing accuracy depends on the accuracy of the reference surface. Absolute measurement is one of the most effective methods to improve the testing accuracy in interferometry. We present an efficient absolute measurement method based on Zernike polynomial fitting algorithms. With our proposed method, the profiles of both the test surface and the reference surface can be calculated simultaneously. We further carried out simulation analysis to scientifically evaluate the test accuracy of the proposed method. Finally, we conducted actual experiments to demonstrate the feasibility and practicability of our method.
RESUMO
Aspherical surfaces can provide significant benefits to a wide variety of optical systems, but manufacturing high-precision aspherical surfaces has historically been limited by the ability to measure them. Null testing has always been the ideal method in aspherical measurement. However, in many cases, it is hard to realize null testing for complex surfaces, especially for convex surfaces in complicated forms. In this paper, we propose a hybrid compensation method combining a spherical mirror and a computer generated hologram (CGH) to achieve the null testing of the convex aspherical surface. Firstly, we introduce our self-developed mathematical models in the hybrid compensation method, including optics alignment model, distortion correction model and spherical surface error removing model. Then the performance of our proposed method is analyzed by a null testing experiment of an off-axis convex ellipsoid mirror. The experimental result shows that the proposed method can accomplish the hybrid compensation testing of convex aspherical surfaces effectively, and it can also bring much to the application of our method in convex aspherical surface testing.
RESUMO
In this paper, we propose a systematic approach to automatically retrieve the first-order designs of three-component zoom systems with fixed spacing between focal points based on Particle Swarm Optimization (PSO) algorithm. In this method, equations are derived for the first-order design of a three-component zoom lens system in the framework of geometrical optics to decide its basic optical parameters. To realize the design, we construct the mathematical model of the special zoom system with two fixed foci based on Gaussian reduction. In the optimization phase, we introduce a new merit function as a performance metric to optimize the first-order design, considering maximum zoom ratio, total optical length and aberration term. The optimization is performed by iteratively improving a candidate solution under the specific merit function in the multi-dimensional parametric space. The proposed method is demonstrated through several examples, which cover almost all the common application scenarios. The results show that this method is a practical and powerful tool for automatically retrieving the optimal first-order design for complex optical systems.
RESUMO
The annular subaperture stitching method is an effective method for testing rotationally symmetric aspherical surfaces. To create a full aperture map of this kind of asphere, we propose an annular subaperture stitching algorithm. The algorithm is based on triangulation interpolation theory, least-square fitting method, and ray tracing method. We first show the principle of our stitching algorithm. Then, the performance of the proposed method is analyzed by simulation testing to evaluate the accuracy of the above algorithm. In the end, the experiment is given to demonstrate the correctness of our method. Both the simulation and experiment results show that the introduced method is quite effective for the testing of rotationally symmetric aspherical surfaces.
RESUMO
Quantitative phase microscopy (QPM) is indispensable in biomedical research due to its advantages in unlabeled transparent sample thickness quantification and obtaining refractive index information. Fourier ptychographic microscopy (FPM) is among the most promising QPM methods, incorporating multi-angle illumination and iterative phase recovery for high-resolution quantitative phase imaging (QPI) of large cell populations over a wide field of-view (FOV) in a single pass. However, FPM is limited by data redundancy and sequential acquisition strategies, resulting in low imaging efficiency, which in turn limits its real-time application in in vitro label-free imaging. Here, we report a fast QPM based on Fourier ptychography (FQP-FPM), which uses an optimized annular downsampling and parallel acquisition strategy to minimize the amount of data required in the front end and reduce the iteration time of the back-end algorithm (3.3% and 4.4% of conventional FPM, respectively). Theoretical and data redundancy analyses show that FQP-FPM can realize high-throughput quantitative phase reconstruction at thrice the resolution of the coherent diffraction limit by acquiring only ten raw images, providing a precondition for in vitro label-free real-time imaging. The FQP-FPM application was validated for various in vitro label-free live-cell imaging. Cell morphology and subcellular phenomena in different periods were observed with a synthetic aperture of 0.75â NA at a 10× FOV, demonstrating its advantages and application potential for fast high-throughput QPI.
RESUMO
Applying the iterative triangulation stitching algorithm, we provide an experimental demonstration by testing a Φ120 mm flat mirror, a Φ1450 mm off-axis parabolic mirror and a convex hyperboloid mirror. By comparing the stitching results with the self-examine subaperture, it shows that the reconstruction results are in consistent with that of the subaperture testing. As all the experiments are conducted with a 5-dof adjustment platform with big adjustment errors, it proves that using the above mentioned algorithm, the subaperture stitching can be easily performed without a precise positioning system. In addition, with the algorithm, we accomplish the coordinate unification between the testing and processing that makes it possible to guide the processing by the stitching result.
RESUMO
Significance: Fourier ptychographic microscopy (FPM) is a new, developing computational imaging technology. It can realize the quantitative phase imaging of a wide field of view and high-resolution (HR) simultaneously by means of multi-angle illumination via a light emitting diode (LED) array, combined with a phase recovery algorithm and the synthetic aperture principle. However, in the FPM reconstruction process, LED position misalignment affects the quality of the reconstructed image, and the reconstruction efficiency of the existing LED position correction algorithms needs to be improved. Aim: This study aims to improve the FPM correction method based on simulated annealing (SA) and proposes a position misalignment correction method (AA-C algorithm) using an improved phase recovery strategy. Approach: The spectrum function update strategy was optimized by adding an adaptive control factor, and the reconstruction efficiency of the algorithm was improved. Results: The experimental results show that the proposed method is effective and robust for position misalignment correction of LED arrays in FPM, and the convergence speed can be improved by 21.2% and 54.9% compared with SC-FPM and PC-FPM, respectively. Conclusions: These results can reduce the requirement of the FPM system for LED array accuracy and improve robustness.
Assuntos
Iluminação , Microscopia , Microscopia/métodos , Análise de Fourier , AlgoritmosRESUMO
Femtosecond vortex beams are of great scientific and practical interest because of their unique phase properties in both the longitudinal and transverse modes, enabling multi-dimensional quantum control of light fields. Until now, generating femtosecond vortex beams for applications that simultaneously require ultrashort pulse duration, high power, high vortex order, and a low cost and compact laser source has been very challenging due to the limitations of available generation methods. Here, we present a compact apparatus that generates powerful high-order femtosecond vortex pulses via astigmatic mode conversion from a mode-locked Hermite-Gaussian Yb:KGW laser oscillator in a hybrid scheme using both the translation-based off-axis pumping and the angle-based non-collinear pumping techniques. This hybrid scheme enables the generation of femtosecond vortices with a continuously tunable vortex order from the 1st up to the 30th order, which is the highest order obtained from any femtosecond vortex laser source based on a mode-locked oscillator. The average powers and pulse durations of all resulting vortex pulses are several hundred milliwatts and <650 fs, respectively. In particular, 424-fs 11th-order vortex pulses have been achieved with an average power of 1.6 W, several times more powerful than state-of-the-art oscillator-based femtosecond vortex sources.
RESUMO
Self-assembly of particle-like dissipative solitons, in the presence of mutual interactions, emphasizes the vibrant concept of soliton molecules in varieties of laser resonators. Controllable manipulation of the molecular patterns, held by the degrees of freedom of internal motions, still remains challenging to explore more efficient and subtle tailoring approaches for the increasing demands. Here, we report a new phase-tailored quaternary encoding format based on the controllable internal assembly of dissipative soliton molecules. Artificial manipulation of the energy exchange of soliton-molecular elements stimulates the deterministic harnessing of the assemblies of internal dynamics. Self-assembled soliton molecules are tailored into four phase-defined regimes, thus constituting the phase-tailored quaternary encoding format. Such phase-tailored streams are endowed with great robustness and are resistant to significant timing jitter. All these results experimentally demonstrate the programmable phase tailoring and exemplify the application of the phase-tailored quaternary encoding, prospectively promoting high-capacity all-optical storage.
RESUMO
A novel macrocyclic organotin(iv) carboxylate {[n-Bu2Sn(O)]9(CH2CH3)2L}·3CH2CH3OH (complex 1) (L = (9-carboxymethyl-1,3,8,10-tetraoxo-3,8,9,10-tetrahydro-1H-anthra[2,1,9-def;6,5,10-d'e'f']diisoquinolin-2-yl)-acetic acid) was generated by the reaction of dibutyltin oxide with amide dicarboxylic acid L and characterized by elemental analysis, IR, (1)H and (13)C NMR spectroscopy. X-ray crystallography diffraction analysis reveals that 1 is a centrosymmetric macrocycle and contains a nona-nuclear eight-fold-ladder-like organo-oxotin cluster. The preliminary luminescent properties of complex have also been studied.