RESUMO
The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.
Assuntos
Anti-Infecciosos , Nanoestruturas , Elétrons , Nanoestruturas/toxicidade , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , MetaisRESUMO
Electrocatalytic nitric oxide reduction (eNORR) to ammonia (NH3) provides an environmental route to alleviate NO pollution and yield great-value chemicals. The evolution of eNORR has been primarily hindered, however, by the poor reaction kinetics and low solubility of the NO in aqueous electrolytes. Herein, we have rationally designed a cobalt-based composite with a heterostructure as a highly efficient eNORR catalyst. In addition, by integrating boron to modulate the electronic structure, the catalyst CoB/Co@C delivered a significant NH3 yield of 315.4 µmol h-1 cm-2 for eNORR and an outstanding power density of 3.68 mW cm-2 in a Zn-NO battery. The excellent electrochemical performance of CoB/Co@C is attributed to the enrichment of NO by cobalt and boron dual-site adsorption and fast charge-transfer kinetics. It is demonstrated that the boron is pivotal in the enhancement of NO, the suppression of hydrogen evolution, and Co oxidation to boost eNORR performance.
RESUMO
Silver (Ag) is deemed a promising anode material for capacitive deionization (CDI) due to its high theoretical capacity and efficient selectivity to Cl-. However, the strong volume change during the conversion reaction significantly undermines the cycling performance of the Ag electrode. Additionally, achieving well-dispersed Ag in the active matrix is challenging, as Ag electrodes prepared by conventional thermal reduction tend to agglomerate. Herein, the organic linker confinement strategy is proposed, applying metal-organic framework (MOF) chemistry between Ag nodes and organic ligands to construct Ag-based MOF. The uniform dispersion of Ag at the molecular level, confined in the organic matrix, efficiently enhances the utilization of active sites, and strengthens the interfacial stability of Ag. Consequently, the Ag-MOF for the CDI anode exhibits an excellent Cl- removal capacity of 121.52 mg g-1 at 20 mA g-1 in 500 mg L-1 NaCl solution, and a high Ag utilization rate of 60.54%. After 100 cycles, a capacity retention of 96.93% is achieved. Furthermore, the Cl- capture mechanism of Ag-MOF is elucidated through density functional theory (DFT) calculations, ex situ XRD, ex situ Raman and XPS. This ingenious electrode design can offer valuable insights for the development of high-performance conversion electrodes for CDI applications.
RESUMO
The practical application of carbon anode in capacitive deionization (CDI) is greatly hindered by their poor adsorption capacity and co-ion effect. Herein, an N-doped graphene-like carbon (NC) decorated with Fe/Fe3C nanoparticles composite (Fe/Fe3C@NC) with large specific surface area and plentiful porosity is fabricated via a facile and scalable method, namely sol-gel method combined with Fe-catalyzed carbonization. As expected, it exhibits superior CDI performance as a Cl-storage electrode, with Cl- adsorption capacity as high as 102.3 mg g-1 at 1000 mg L-1 Cl- concentration and 1.4 V voltage, and a stable capacity of 68.5 mg g-1 for 60 cycles in 500 mg L-1 Cl- concentration and 100 mA g-1 current density. More importantly, on the basis of electrochemical tests, ex-situ X-ray diffraction, ex-situ X-ray photoelectron spectroscopy (XPS), and XPS analysis with argon ion depth etching, it is revealed that the chlorine storage mechanism of the Fe/Fe3C@NC electrode is dominated by the surface-related redox pseudocapacitance behavior of Fe2+/Fe3+ couple occurring on or near the surface, enabling fast and reversible ion storage. This work proposes an economical and environmentally friendly general method for the design and development of high-performance Cl-storage electrodes for CDI, and offers an in-depth insight into the Cl- storage mechanism of Fe decorated carbon electrodes, further promoting the development of CDI technology.
Assuntos
Grafite , Purificação da Água , Carbono/química , Purificação da Água/métodos , Cloretos , OxirreduçãoRESUMO
Layered double hydroxides (LDHs) are perceived as a hopeful capacitive deionization (CDI) faradic electrode for Cl- insertion due to its tunable composition, excellent anion exchange capacity, and fast redox activity. Nevertheless, the self-stacking and inferior electrical conductivity of the two-dimensional structure of LDH lead to unsatisfactory CDI performance. Herein, the three-dimensional (3D) hollow nanocage structure of CoNi-layered double hydroxide/carbon composites is well designed as a CDI anode by cation etching of the pre-carbonized ZIF-67 template. C/CoNi-LDH has a unique 3D hollow nanocage structure and abundant pore features, which can effectively suppress the self-stacking of LDH sheets and facilitate the transport of ions. Moreover, the introduced amorphous carbon layer can act as a conductive network. When employed as the CDI anode, C/CoNi-LDH exhibited a high Cl- removal capacity of 60.88 mg g-1 and a fast Cl- removal rate of 18.09 mg g-1 min-1 at 1.4 V in 1000 mg L-1 NaCl solution. The mechanism of the Cl- intercalation pseudo-capacitance reaction of C/CoNi-LDH is revealed by electrochemical kinetic analysis and ex situ characterization. This study provides vital guidance for the design of high-performance electrodes for CDI.
RESUMO
Capacitive deionization is an emerging desalination technology with mild operation conditions and high energy efficiency. However, its application is limited due to the low deionization capacity of traditional capacitive electrodes. Herein, we report a novel dual-ion capacitive deionization system with a lithium-ion battery cathode LiMn2O4/C and a sodium-ion battery anode NaTi2(PO4)3/C. Lithium ions could enhance the charge transfer during CDI desalination, while NaTi2(PO4)3/C provided direct intercalation sites for sodium ions. The electrochemical capacities of the battery electrodes fitted well, which was favorable for the optimization of the desalination capacity. The low potential of the redox couple Ti3+/Ti4+ (-0.8 V versus Ag/AgCl) and intercalation/deintercalation behaviors of sodium ions that suppressed hydrogen evolution could enlarge the voltage window of the CDI process to 1.8 V. The novel CDI cell achieved an ultrahigh desalination capacity of 140.03 mg·g-1 at 1.8 V with an initial salinity of 20 mM, revealing a new direction for the CDI performance enhancement.
RESUMO
Electrochemical deionization (EDI) is hopefully the next generation of water treatment technology. Bismuth (Bi) is a promising anode material for EDI, due to its high capacity and selectivity toward Cl-, but the large volume expansion and severe pulverization aggressively attenuated the EDI cycling performance of Bi electrodes. Herein, carbon-layer-encapsulated nano-Bi composites (Bi@C) were prepared by a simple pyrolysis method using a Bi-based metal-organic framework as a precursor. Bi nanoparticles are uniformly coated within the carbon layer, in which the Bi-O-C bond enhances the interaction between Bi and C. Such a structure effectively relieves the stress caused by volume expansion by the encapsulation effect of the carbon layer. Moreover, the introduction of a carbon skeleton provides a conductive network. As a consequence, the Bi@C composite delivered excellent electrochemical performance with a capacity of 537.6 F g-1 at 1 mV s-1. The Cl- removal capacity was up to 133.5 mg g-1 at 20 mA g-1 in 500 mg L-1 NaCl solution. After 100 cycles, the Bi@C electrode still maintains 71.8% of its initial capacity, which is much higher than the 26.3% of the pure Bi electrode. This study provides a promising strategy for improving EDI electrode materials.
RESUMO
Bauxite is a widely available Al-O-rich mineral with great potential for abating fluoride. However, low adsorption capacity, a narrow workable pH range, and a lack of clarity on the best removal mechanism hinder its application. In this work, a highly efficient bauxite nanocomposite (Bx-Ce-La@500) was synthesized via doping and pyrolysis, and its fluoride adsorption in industrial wastewater was examined. Doping Ce/La synergistically improved the fluoride adsorption affinity of the composite (from pHPZC 8.0 ~ 10.0) and enhanced the â¢OH. The materials were characterized by SEM-EDS, BET, XRD, and TGA while XPS, FTIR, and DFT were used to investigate the mechanism of fluoride sorption. Results show that Bx-Ce-La@â¯500 has a positive zeta potential of 26.3-23.1â¯mV from pH 1~ 10. The Langmuir model was the best fit with a maximum adsorption capacity of 88.13â¯mg/g and removal efficiency up to 100% in 50â¯ppmâ¯F- solution. The high F- removal was attributed to the enhanced surface affinity and the formation of adequate â¢OH on the material. Except for carbonate and phosphate ions, other ions exhibited negligible effects and the selective removal of F- in real wastewater was high. The main mechanism of adsorption was the ligand/ion exchange and electrostatic attraction.
RESUMO
Electrostatic and complexation effects have been considered as the primary adsorption mechanisms for defluorination using aluminum based materials, while the effect of ion exchange between anions and fluorine ion has been mostly ignored, although synthesized alumina materials usually contain a large amount of anions, such as SO42-, NO3-, and Cl-. In this study, the effect of anions exchanges and its key role on defluorination were systematically investigated for adsorption by aluminas loaded with various typical anions (SO42-, NO3- and Cl-). Experimental results showed that SO42-- loading alumina had the best defluorination performance (94.5 mg/g), much higher than NO3- (45.0 mg/g) and Cl- (19.1 mg/g). The contribution ratio of ion exchange between SO42- and F- was as high as 20-60% in all potential defluorination mechanisms. By using Density Functional Theory calculation, the detailed mechanism revealed that the ion exchange process was mainly driven by the tridentate chelation of SO42- which reduced the exchange energy ( [Formula: see text] 4.8 eV). Our study clearly demonstrated that ion exchange between SO42- and F- is a critical mechanism in defluorination using aluminum-based materials and provides a potential alternative method to enhance the adsorption performance of modified alumina.