Radiative transfer model and validation for infrared management optical properties of porous polymer materials incorporating impacts of micro-voids.

In order to characterize the infrared (IR) radiation absorption and/or emission performances of functional porous polymers which claim to have healthcare functions due to IR excitation and emission by processing technologies, a radiative transfer model was constructed based on the principle of IR radiation, the Beer-Lambert law, the Fresnel's formula and Planck's law. The theoretical analysis was conducted for the IR management optical properties of the porous sheet polymer materials, including IR reflection, transmission, absorption and emission behaviours during the dynamic process of IR radiation. A modeling method for characterization and revealing of IR management optical properties and optical and thermal transfer behaviours of the reflection and transmission was then investigated from the structural parameters and the temperature rise characteristics of the porous sheet polymer materials during the dynamic IR radiation process. The model was validated by comparing the predicted values from the radiative transfer model with the measured values from the test results of the validation experiments of eight typical porous sheet polymers in an experimental setup. The model was modified by consideration of the influences of two types of micro-voids defects represented by the porosity of micro structure and the thickness compression ratio. The micro-voids defects factors were added to the structural parameters, and therefore the model was improved and the maximum prediction errors of the transmission and reflection surfaces were mostly less than 10%. The radiative transfer model provides the theoretical fundamentals for the evaluation and guidance of IR management optical performances for new products design, development, fabrication and processing in industrial application of functional porous polymers.

Synthesis and preliminary biological evaluation of S-11C-methyl-D-cysteine as a new amino acid PET tracer for cancer imaging.

S-(11)C-methyl-L-cysteine (LMCYS) is an attractive amino acid tracer for clinical tumor positron emission tomography (PET) imaging. D-isomers of some radiolabeled amino acids are potential PET tracers for tumor imaging. In this work, S-(11)C-methyl-D-cysteine (DMCYS), a D-amino acid isomer of S-(11)C-methyl-cysteine for tumor imaging was developed and evaluated. DMCYS was prepared by (11)C-methylation of the precursor D-cysteine, with an uncorrected radiochemical yield over 50 % from (11)CH3I within a total synthesis time from (11)CO2 about 12 min. In vitro competitive inhibition studies showed that DMCYS uptake was primarily transported through the Na(+)-independent system L, and also the Na(+)-dependent system B(0,+) and system ASC, with almost no system A. In vitro incorporation experiments indicated that almost no protein incorporation was found in Hepa 1-6 hepatoma cell lines. Biodistribution studies demonstrated higher uptake of DMCYS in pancreas and liver at 5 min post-injection, relatively lower uptake in brain and muscle, and faster radioactivity clearance from most tissues than those of L-isomer during the entire observation time. In the PET imaging of S180 fibrosarcoma-bearing mice and turpentine-induced inflammatory model mice, 2-(18)F-fluoro-2-deoxy-D-glucose (FDG) exhibited significantly high accumulation in both tumor and inflammatory lesion with low tumor-to-inflammation ratio of 1.40, and LMCYS showed low tumor-to-inflammation ratio of 1.64 at 60 min post-injection. By contrast, DMCYS showed moderate accumulation in tumor and very low uptake in inflammatory lesion, leading to relatively higher tumor-to-inflammation ratio of 2.25 than (11)C-methyl-L-methionine (MET) (1.85) at 60 min post-injection. Also, PET images of orthotopic transplanted glioma models demonstrated that low uptake of DMCYS in normal brain tissue and high uptake in brain glioma tissue were observed. The results suggest that DMCYS is a little better than the corresponding L-isomers as a potential PET tumor-detecting agent and is superior to MET and FDG in the differentiation of tumor from inflammation.

[Radiosynthesis and preliminary evaluation of 5-([11C]methyloxy)-L-tryptophan as PET tumor imaging].

The PET tracer 5-([11C]methyloxy)-L-tryptophan (5-(11)CMTP) was prepared by nucleophilic fluorination and alkylation reaction via a two-step procedure in order to develop specific tumor probe. The biodistribution and microPET imaging of 5-(11)CMTP were executed. The results unveiled that the overall radiochemical yield with no decay correction was (14.6 ±7.2) %, the radiochemical purity was more than 95% and high uptake and long retention time of 5-(11)CMTP in liver, kidney and blood were observed but low uptake in brain and muscle were found, furthermore, high uptake of 5-(11)CMTP in tumor tissue was observed. It seems that 5-(11)CMTP will be a potential amino acid tracer for tumors imaging with PET.

Neuropathologic damage induced by radiofrequency ablation at different temperatures.

OBJECTIVE: To explore the molecular mechanism of neuropathologic damage induced by radiofrequency ablation at different temperatures. METHODS: This is basic research, and 36 SD rats were used to construct the neuropathological injury model. The rats were subjected to radiofrequency stimulation at different temperatures and were divided into 6 groups according to the temperature injury: 42°, 47°, 52°, 57°, 62°, and 67°C groups. Conduction time, conduction distance, and nerve conduction velocity were recorded after temperature injury. HE-staining was used to observe the histopathological morphology of the sciatic nerve. The expression of SCN9A, SCN3B, and NFASC protein in sciatic nerve tissue were detected by western blot. RESULTS: With the increase in temperature, nerve conduction velocity gradually decreased, and neurons were damaged when the temperature was 67°C. HE-staining showed that the degrees of degeneration of neurons in rats at 47°, 52°, 57°, 62°, and 67°C were gradually increased. The expression of SCN9A, SCN3B protein in 57°, 62°, 67°C groups were much higher than that of NC, 42°, 47°, 52°C groups. However, the expression of NFASC protein in 57°, 62°, 67°C groups was much lower than that of the NC, 42°, 47°, 52°C groups. CONCLUSION: There was a positive correlation between temperature caused by the radiofrequency stimulation to neuropathological damage. The mechanism is closely related to the expression of SCN9A, SCN3B, and NFASC protein in nerve tissue caused by heat transfer injury.

Impact of structural features on dynamic breathing resistance of healthcare face mask.

In order to provide an overall evaluation and characterization of the comfort sensation and performance of face mask related to breathing resistance for healthcare in fog and haze weather, and address the influence of structural features on breathing resistance properties, an experimental set-up was developed, which was able to continuously change the direction and rate of air flow and the breathing frequency to simulate the dynamic breathing process during the actual wearing of face mask. The dynamic changes of airflow rate and the breathing resistance were acquired by a virtual instrument (VI) system and a microelectronics system. Six evaluation indices were defined for the dynamic performance and comfort sensation of face mask, derived from the source data of dynamic breathing resistance. Twelve types of face masks from different department stores with different features such as shape, respiratory valve, brand, main materials and protection level were tested using the experimental set-up. The one-way ANOVA analysis was carried out to identify the significance of the differences of the indices among the test masks. The results showed that each evaluation index was significantly different (P < 0.05) among different test masks. The change rate of breathing resistance could be obtained using the dynamic measurement of breathing resistance and could be applied for the dynamic performance evaluation of face mask compared with the static measurement of breathing resistance under constant airflow rate. The influences of structural features such as respiratory valve, shape and main materials on breathing resistance were evaluated and analyzed. The face masks with respiratory valve had lower change rate of breathing resistance. Moreover, the cup type mask had lower change rate of breathing resistance than the folding mask. Furthermore, the cotton mask had lower change rate of breathing resistance than the nonwoven fabric mask.

Mechanical Measurement System and Precision Analysis for Tactile Property Evaluation of Porous Polymeric Materials.

Tactile properties are one of the most important attributes of porous polymeric materials such as textiles, comprising a subjective evaluation index for textile materials and functional clothing, primarily affecting the sensation of comfort during the wearing of a garment. A new test method was proposed, and a mechanical measurement system was developed to objectively characterize the tactile properties of porous polymeric materials by simulating the dynamic contact processes during human skin contact with the materials and in consideration of different aspects of tactile sensations. The measurement system can measure the bending, compression, friction, and thermal transfer properties in one apparatus, and is capable of associating the objective measurements with the subjective tactile sensations. The test and evaluation method, the components of the mechanical measurement system, the definition and grading method of the evaluation indices, and the neural network prediction model from objective test results to subjective sensations of tactile properties were presented. The experiments were conducted for the objective tests and correlation tests. Seven types of porous polymeric sheet materials from seven categories for the tactile properties were cut to a size of 200 mm × 200 mm and tested. Each index of tactile properties was significantly different (P < 0.05) between different sheet materials. The correlations of bending, compression, friction, and thermal transfer properties with Kawabata KES test methods were analyzed. An intra-laboratory test was conducted and an analysis of the variance was performed to determine the critical differences of within laboratory precisions of the measurement system. This mechanical measurement system provides a method and system for objective measurement and evaluation of tactile properties of porous polymeric sheet materials in industrial application.

Simultaneous Contact Sensing and Characterizing of Mechanical and Dynamic Heat Transfer Properties of Porous Polymeric Materials.

Porous polymeric materials, such as textile fabrics, are elastic and widely used in our daily life for garment and household products. The mechanical and dynamic heat transfer properties of porous polymeric materials, which describe the sensations during the contact process between porous polymeric materials and parts of the human body, such as the hand, primarily influence comfort sensations and aesthetic qualities of clothing. A multi-sensory measurement system and a new method were proposed to simultaneously sense the contact and characterize the mechanical and dynamic heat transfer properties of porous polymeric materials, such as textile fabrics in one instrument, with consideration of the interactions between different aspects of contact feels. The multi-sensory measurement system was developed for simulating the dynamic contact and psychological judgment processes during human hand contact with porous polymeric materials, and measuring the surface smoothness, compression resilience, bending and twisting, and dynamic heat transfer signals simultaneously. The contact sensing principle and the evaluation methods were presented. Twelve typical sample materials with different structural parameters were measured. The results of the experiments and the interpretation of the test results were described. An analysis of the variance and a capacity study were investigated to determine the significance of differences among the test materials and to assess the gage repeatability and reproducibility. A correlation analysis was conducted by comparing the test results of this measurement system with the results of Kawabata Evaluation System (KES) in separate instruments. This multi-sensory measurement system provides a new method for simultaneous contact sensing and characterizing of mechanical and dynamic heat transfer properties of porous polymeric materials.

Apparatus and test method for characterizing the temperature regulating properties of thermal functional porous polymeric materials.

In order to evaluate the temperature regulating properties of thermal functional porous polymeric materials such as fabrics treated with phase change material microcapsules, a new apparatus was developed. The apparatus and the test method can measure the heat flux, temperature, and displacement signals during the dynamic contact and then quickly give an evaluation for the temperature regulating properties by simulating the dynamic heat transfer and temperature regulating process when the materials contact the body skin. A series of indices including the psychosensory intensity, regulating capability index, and relative regulating index were defined to characterize the temperature regulating properties. The measurement principle, the evaluation criteria and grading method, the experimental setup and the test results discussion, and the gage capability analysis of the apparatus are presented. The new apparatus provides a method for the objective measurement and evaluation of the temperature regulating properties of thermal functional porous polymeric materials.

Neuropathologic damage induced by radiofrequency ablation at different temperatures

Abstract Objective To explore the molecular mechanism of neuropathologic damage induced by radiofrequency ablation at different temperatures. Methods This is basic research, and 36 SD rats were used to construct the neuropathological injury model. The rats were subjected to radiofrequency stimulation at different temperatures and were divided into 6 groups according to the temperature injury: 42°, 47°, 52°, 57°, 62°, and 67°C groups. Conduction time, conduction distance, and nerve conduction velocity were recorded after temperature injury. HE-staining was used to observe the histopathological morphology of the sciatic nerve. The expression of SCN9A, SCN3B, and NFASC protein in sciatic nerve tissue were detected by western blot. Results With the increase in temperature, nerve conduction velocity gradually decreased, and neurons were damaged when the temperature was 67°C. HE-staining showed that the degrees of degeneration of neurons in rats at 47°, 52°, 57°, 62°, and 67°C were gradually increased. The expression of SCN9A, SCN3B protein in 57°, 62°, 67°C groups were much higher than that of NC, 42°, 47°, 52°C groups. However, the expression of NFASC protein in 57°, 62°, 67°C groups was much lower than that of the NC, 42°, 47°, 52°C groups. Conclusion There was a positive correlation between temperature caused by the radiofrequency stimulation to neuropathological damage. The mechanism is closely related to the expression of SCN9A, SCN3B, and NFASC protein in nerve tissue caused by heat transfer injury.

Radiosynthesis and preliminary biological evaluation of N-(2-[18F]fluoropropionyl)-L-glutamine as a PET tracer for tumor imaging.

In this study, radiosynthesis and biological evaluation of a new [18F]labeled glutamine analogue, N-(2-[18F]fluoropropionyl)-L-glutamine ([18F]FPGLN) for tumor PET imaging are performed. [18F]FPGLN was synthesized via a two-step reaction sequence from 4-nitrophenyl-2-[18F]fluoropropionate ([18F]NFP) with a decay-corrected yield of 30 ± 5% (n=10) and a specific activity of 48 ± 10 GBq/µmol after 125 ± 5 min of radiosynthesis. The biodistribution of [18F]FPGLN was determined in normal Kunming mice and high uptake of [18F]FPGLN was observed within the kidneys and quickly excreted through the urinary bladder. In vitro cell experiments showed that [18F]FPGLN was primarily transported by Na+-dependent system XAG- and was not incorporated into proteins. [18F]FPGLN displayed better stability in vitro than that in vivo. PET/CT studies revealed that intense accumulation of [18F]FPGLN were shown in human SPC-A-1 lung adenocarcinoma and PC-3 prostate cancer xenografts. The results support that [18F]FPGLN seems to be a possible PET tracer for tumor imaging.

Radiation dosimetry estimation of N-(2-[(18)F]fluoropropionyl)- L-glutamate based on the mice distribution data.

N-(2-[(18)F]fluoropropionyl)-l-glutamate([(18)F]FPGLU) was a recently developed potential amino acid tracer for tumor imaging with positron emission tomography-computer tomography (PET-CT). The absorbed and effective radiation doses resulting from the intravenous administration of [(18)F]FPGLU were estimated using biodistribution data from normal mice. The methodology recommended by Medical Internal Radiation Dose Committee (MIRD) was used to estimate the doses. The highest uptake of [(18)F]FPGLU was found in the kidneys, followed by the liver and lung. The kidneys were the organ received the highest absorbed dose, 58.4µGy/MBq, the brain received the lowest dose, 5.5µGy/MBq, and other organs received doses in the range of 8.3-11.9µGy/MBq. The effective dose was 17.0µSv/MBq. The data show that a 370MBq (10mCi) injection of [(18)F]FPGLU would lead to an estimated effective dose of 6.3mSv, which is within the accepted range of routine nuclear medicine investigations.

18F-FP-PEG2-ß-Glu-RGD2: A Symmetric Integrin αvß3-Targeting Radiotracer for Tumor PET Imaging.

Radiolabeled cyclic arginine-glycine-aspartic (RGD) peptides can be used for noninvasive determination of integrin αvß3 expression in tumors. In this study, we performed radiosynthesis and biological evaluation of a new 18F-labeled RGD homodimeric peptide with one 8-amino-3,6-dioxaoctanoic acid (PEG2) linker on the glutamate ß-amino group (18F-FP-PEG2-ß-Glu-RGD2) as a symmetric PET tracer for tumor imaging. Biodistribution studies showed that radioactivity of 18F-FP-PEG2-ß-Glu-RGD2 was rapidly cleared from blood by predominately renal excretion. MicroPET-CT imaging with 18F-FP-PEG2-ß-Glu-RGD2 revealed high tumor contrast and low background in A549 human lung adenocarcinoma-bearing mouse models, PC-3 prostate cancer-bearing mouse models, and orthotopic transplanted C6 brain glioma models. 18F-FP-PEG2-ß-Glu-RGD2 exhibited good stability in vitro and in vivo. The results suggest that this tracer is a potential PET tracer for tumor imaging.

Molecular PET Imaging of Cyclophosphamide Induced Apoptosis with 18F-ML-8.

In this paper, a novel small-molecular apoptotic PET imaging probe, (18)F-ML-8 with a malonate motif structure, is presented and discussed. After study, the small tracer that belongs to a member of ApoSense family is proved to be capable of imaging merely apoptotic regions in the CTX treated tumor-bearing mice. The experimental result is further confirmed by in vitro cell binding assays and TUNEL staining assay. As a result, (18)F-ML-8 could be used for noninvasive visualization of apoptosis induced by antitumor chemotherapy.

Human Biodistribution and Radiation Dosimetry of S-11C-Methyl-L-Cysteine Using Whole-Body PET.

PURPOSE: S-C-Methyl-L-cysteine (C-MCYS) is a recently developed amino acid PET tracer for tumor imaging. The present study estimated human radiation absorbed dose of C-MCYS in healthy volunteers based on whole-body PET imaging. METHODS: Five sequential whole-body PET scans were performed on 6 healthy volunteers after injection of C-MCYS. Each scan contained of approximately 7 to 10 bed positions, and total scan time of each volunteer was approximately 70 to 85 minutes. Regions of interest were drawn on PET images of source organs. Residence times of 13 source organs for men and 14 source organs for women were calculated from the organ-specific time-activity curves. Absorbed dose estimates were performed from organ residence time by using the medical internal radiation dosimetry method. RESULTS: All volunteers showed initial high uptake in liver, heart, kidneys, pancreas, spleen, and uterus (only women), and followed by rapid clearance. There was very little activity residual in most of the organs except for the liver at the last emission scan time (approximately 75 minutes). The liver was the dose-limiting critical organ with the highest radiation-absorbed dose (1.01E-02 ± 2.64E-03 mGy/MBq), followed by the heart (9.09E-03 ± 1.40E-03 mGy/MBq), and the kidneys (7.12E-03 ± 9.44E-04 mGy/MBq). The effective dose to the whole body was 4.03E-03 ± 1.65E-04 mSv/MBq. A routine injection of 555 MBq (15 mCi) of C-MCYS would lead to an estimated effective dose of 2.24 ± 0.092 mSv. CONCLUSIONS: The potential radiation risks associated with C-MCYS PET imaging are within accepted limits. C-MCYS is a safe amino acid PET tracer for tumor imaging and can be used in further clinical studies.

Radiosynthesis and biological evaluation of N-[18F]labeled glutamic acid as a tumor metabolic imaging tracer.

We have previously reported that N-(2-[18F]fluoropropionyl)-L-methionine ([18F]FPMET) selectively accumulates in tumors. However, due to the poor pharmacokinetics of [18F]FPMET in vivo, the potential clinical translation of this observation is hampered. In this study, we rationally designed and synthesized [18F] or [11C]labeled N-position L-glutamic acid analogues for tumor imaging. N-(2-[18F]fluoropropionyl)-L-glutamic acid ([18F]FPGLU) was synthesized with a 30±10% (n = 10, decay-corrected) overall radiochemical yield and a specific activity of 40±25 GBq/µmol (n = 10) after 130 min of radiosynthesis. In vitro cell experiments showed that [18F]FPGLU was primarily transported through the XAG(-) system and was not incorporated into protein. [18F]FPGLU was stable in urine, tumor tissues, and blood. We were able to use [18F]FPGLU in PET imaging and obtained high tumor to background ratios when visualizing tumors tissues in animal models.