Nucleation and Growth Mode of Solid Electrolyte Interphase in Li-Ion Batteries.

The solid electrolyte interphase (SEI) is regarded as the most important yet least understood component in Li-ion batteries. Considerable effort has been devoted to unravelling its chemistry, structure, and ion-transport mechanism; however, the nucleation and growth mode of SEI, which underlies all these properties, remains the missing piece. We quantify the growth mode of two representative SEIs on carbonaceous anodes based on classical nucleation theories and in situ atomic force microscopy imaging. The formation of inorganic SEI obeys the mixed 2D/3D growth model and is highly dependent on overpotential, whereby large overpotential favors 2D growth. Organic SEI strictly follows the 2D instantaneous nucleation and growth model regardless of overpotential and enables perfect epitaxial passivation of electrodes. We further demonstrate the use of large current pulses during battery formation to promote 2D inorganic SEI growth and improve capacity retention. These insights offer the potential to tailor desired interphases at the nanoscale for future electrochemical devices.

40 Years of Low-Temperature Electrolytes for Rechargeable Lithium Batteries.

Rechargeable lithium batteries are one of the most appropriate energy storage systems in our electrified society, as virtually all portable electronic devices and electric vehicles today rely on the chemical energy stored in them. However, sub-zero Celsius operation, especially below -20 °C, remains a huge challenge for lithium batteries and greatly limits their application in extreme environments. Slow Li+ diffusion and charge transfer kinetics have been identified as two main origins of the poor performance of RLBs under low-temperature conditions, both strongly associated with the liquid electrolyte that governs bulk and interfacial ion transport. In this review, we first analyze the low-temperature kinetic behavior and failure mechanism of lithium batteries from an electrolyte standpoint. We next trace the history of low-temperature electrolytes in the past 40 years (1983-2022), followed by a comprehensive summary of the research progress as well as introducing the state-of-the-art characterization and computational methods for revealing their underlying mechanisms. Finally, we provide some perspectives on future research of low-temperature electrolytes with particular emphasis on mechanism analysis and practical application.

Unlocking Charge Transfer Limitations for Extreme Fast Charging of Li-Ion Batteries.

Extreme fast charging (XFC) of high-energy Li-ion batteries is a key enabler of electrified transportation. While previous studies mainly focused on improving Li ion mass transport in electrodes and electrolytes, the limitations of charge transfer across electrode-electrolyte interfaces remain underexplored. Herein we unravel how charge transfer kinetics dictates the fast rechargeability of Li-ion cells. Li ion transfer across the cathode-electrolyte interface is found to be rate-limiting during XFC, but the charge transfer energy barrier at both the cathode and anode have to be reduced simultaneously to prevent Li plating, which is achieved through electrolyte engineering. By unlocking charge transfer limitations, 184 Wh kg-1 pouch cells demonstrate stable XFC (10-min charge to 80 %) which is otherwise unachievable, and the lifetime of 245 Wh kg-1 21700 cells is quintupled during fast charging (25-min charge to 80 %).

A Successive Conversion-Deintercalation Delithiation Mechanism for Practical Composite Lithium Anodes.

Lithium (Li) metal anodes are attractive for high-energy-density batteries. Dead Li is inevitably generated during the delithiation of deposited Li based on a conversion reaction, which severely depletes active Li and electrolyte and induces a short lifespan. In this contribution, a successive conversion-deintercalation (CTD) delithiation mechanism is proposed by manipulating the overpotential of the anode to restrain the generation of dead Li. The delithiation at initial cycles is solely carried out by a conversion reaction of Li metal. When the overpotential of the anode increases over the delithiation potential of lithiated graphite after cycling, a deintercalation reaction is consequently triggered to complete a whole CTD delithiation process, largely reducing the formation of dead Li due to a highly reversible deintercalation reaction. Under practical conditions, the working batteries based on a CTD delithiation mechanism maintain 210 cycles with a capacity retention of 80% in comparison to 110 cycles of a bare Li anode. Moreover, a 1 Ah pouch cell with a CTD delithiation mechanism operates for 150 cycles. The work ingeniously restrains the generation of dead Li by manipulating the delithiation mechanisms of the anode and contributes to a fresh concept for the design of practical composite Li anodes.

The Raw Mixed Conducting Interphase Affords Effective Prelithiation in Working Batteries.

Contact prelithiation is an important strategy to compensate the initial capacity loss of lithium-ion batteries. However, the dead Li generated from inadequate Li conversion reduces the cycling stability of rechargeable batteries. Herein a mono-solvent dimethyl carbonate (DMC) electrolyte was employed in contact prelithiation for the first time. We discover that the low-organic-content raw electrolyte interphase (REI) induced by this electrolyte on Li source and anode is a mixed ion/electron conductor. Therefore, electron channels can be maintained even when the Li source has been completely wrapped by the DMC-derived REI. As a result, an outstanding Li source utilization of 92.8 % and a negligible dead Li yield can be realized. This strategy renders batteries with a very high initial Coulombic efficiency (90.0 %) and an excellent capacity retention (94.9 %) over 210 cycles, highlighting the significance of REI for effective contact prelithiation.

Quantification of the Dynamic Interface Evolution in High-Efficiency Working Li-Metal Batteries.

Lithium (Li) metal has been considered a promising anode for next-generation high-energy-density batteries. However, the low reversibility and intricate Li loss hinder the widespread implementation of Li metal batteries. Herein, we quantitatively differentiate the dynamic evolution of inactive Li, and decipher the fundamental interplay among dynamic Li loss, electrolyte chemistry, and the structure of the solid electrolyte interphase (SEI). The actual dominant form in inactive Li loss is practically determined by the relative growth rates of dead Li0 and SEI Li+ because of the persistent evolution of the Li metal interface during cycling. Distinct inactive Li evolution scenarios are disclosed by ingeniously tuning the inorganic anion-derived SEI chemistry with a low amount of film-forming additive. An optimal polymeric film enabler of 1,3-dioxolane is demonstrated to derive a highly uniform multilayer SEI and decreased SEI Li+ /dead Li0 growth rates, thus achieving enhanced Li cycling reversibility.

Operando Quantified Lithium Plating Determination Enabled by Dynamic Capacitance Measurement in Working Li-Ion Batteries.

The access to full performance of state-of-the-art Li-ion batteries (LIBs) is hindered by the mysterious lithium plating behavior. A rapid quantified lithium plating determination method compatible with actual working conditions is an urgent necessity for safe working LIBs. In this contribution, the relationship between electrical double layer (EDL) capacitance and electrochemical active surface area (ECSA) of graphite anodes during the Li-ion intercalation and Li plating processes is unveiled. We propose an operando lithium plating determination method based on the dynamic capacitance measurement (DCM) test. Reasonable selection of alternating current (AC) frequency protects the anodic responses from the interference of cathodic responses, which allows DCM to be applied in practical LIBs. The onset of lithium plating can be quantitatively traced, demonstrating the promise for real-time operando determination for lithium plating in a working battery.

A review on energy chemistry of fast-charging anodes.

With the impetus to accelerate worldwide market adoption of electrical vehicles and afford consumer electronics with better user experience, advancing fast-charging technology is an inevitable trend. However, current high-energy lithium-ion batteries are unable to support ultrafast power input without any adverse consequences, with the capacity fade and safety concerns of the mainstream graphite-based anodes being the key technological barrier. The aim of this review is to summarise the fundamentals, challenges, and solutions to enable graphite anodes that are capable of high-rate charging. First, we explore the complicated yet intriguing graphite-electrolyte interface during intercalation based on existing theories. Second, we analyse the key dilemmas facing fast-charging graphite anodes. Finally, some promising strategies proposed during the past few years are highlighted so as to outline current trends and future perspectives in this field.

Nucleation and Growth Mechanism of Anion-Derived Solid Electrolyte Interphase in Rechargeable Batteries.

Solid electrolyte interphase (SEI) has been widely employed to describe the new phase formed between anode and electrolyte in working batteries. Significant advances have been achieved on the structure and composition of SEI as well as on the possible ion transport mechanism. However, the nucleation and growth mechanism of SEI catches little attention, which requires the establishment of isothermal electrochemical crystallization theory. Herein we explore the virgin territory of electrochemically crystallized SEI. By using potentiostatic method to regulate the decomposition of anions, an anion-derived SEI forms on graphite surface at atomic scale. After fitting the cur-rent-time transients with Laviron theory and Avrami formula, we conclude that the formation of anion-derived interface is surface reaction controlled and obeys the two-dimensional (2D) progressive nucleation and growth model. Atomic force microscope (AFM) images emphasize the conclusion, which reveals the mystery of isothermal electrochemical crystallization of SEI.

Inhibiting Solvent Co-Intercalation in a Graphite Anode by a Localized High-Concentration Electrolyte in Fast-Charging Batteries.

Lithium-ion batteries with routine carbonate electrolytes cannot exhibit satisfactory fast-charging performance and lithium plating is widely observed at low temperatures. Herein we demonstrate that a localized high-concentration electrolyte consisting of 1.5 M lithium bis(fluorosulfonyl)imide in dimethoxyethane with bis(2,2,2-trifluoroethyl) ether as the diluent, enables fast-charging of working batteries. A uniform and robust solid electrolyte interphase (SEI) can be achieved on graphite surface through the preferential decomposition of anions. The established SEI can significantly inhibit ether solvent co-intercalation into graphite and achieve highly reversible Li+ intercalation/de-intercalation. The graphite | Li cells exhibit fast-charging potential (340 mAh g-1 at 0.2 C and 220 mAh g-1 at 4 C), excellent cycling stability (ca. 85.5 % initial capacity retention for 200 cycles at 4 C), and impressive low-temperature performance.

The Boundary of Lithium Plating in Graphite Electrode for Safe Lithium-Ion Batteries.

Uncontrolled Li plating in graphite electrodes endangers battery life and safety, driving tremendous efforts aiming to eliminate Li plating. Herein we systematically investigate the boundary of Li plating in graphite electrode for safe lithium-ion batteries. The cell exhibits superior safety performance than that with Li dendrites by defining the endurable amount of uniform Li plating in graphite anode. The presence of "dead Li" can be eliminated owing to the uniform distribution of Li plating, and the average Coulombic efficiency for deposited Li during reversible plating/stripping process is decoupled as high as about 99.5 %. Attributing to the limited Li plating with superior Coulombic efficiency, the LiNi0.5 Mn0.3 Co0.2 O2 | graphite cell achieves a high capacity retention of 80.2 % over 500 cycles. This work sheds a different light on further improving the fast-charging capability, low-temperature performance, and energy density of practical lithium-ion batteries.

Selective Permeable Lithium-Ion Channels on Lithium Metal for Practical Lithium-Sulfur Pouch Cells.

Lithium metal batteries are considered a promising candidate for high-energy-density energy storage. However, the strong reducibility and high reactivity of lithium lead to low Coulombic efficiency when contacting oxidants, such as lithium polysulfide caused by the serious "shuttle effect" in lithium-sulfur batteries. Herein we design selectively permeable lithium-ion channels on lithium metal surface, which allow lithium ions to pass through by electrochemical overpotential, while the polysulfides are effectively blocked due to the much larger steric hindrance than lithium ions. The selective permeation of lithium ions through the channels is further elucidated by the molecular simulation and visualization experiment. Consequently, a prolonged cycle life of 75 cycles and high Coulombic efficiency of 99 % are achieved in a practical Li-S pouch cell with limited amounts of lithium and electrolyte, confirming the unique role the selective ion permeation plays in protecting highly reactive alkali metal anodes in working batteries.

Non-Solvating and Low-Dielectricity Cosolvent for Anion-Derived Solid Electrolyte Interphases in Lithium Metal Batteries.

Lithium (Li) metal anodes hold great promise for next-generation high-energy-density batteries, while the insufficient fundamental understanding of the complex solid electrolyte interphase (SEI) is the major obstacle for the full demonstration of their potential in working batteries. The characteristics of SEI highly depend on the inner solvation structure of lithium ions (Li+ ). Herein, we clarify the critical significance of cosolvent properties on both Li+ solvation structure and the SEI formation on working Li metal anodes. Non-solvating and low-dielectricity (NL) cosolvents intrinsically enhance the interaction between anion and Li+ by affording a low dielectric environment. The abundant positively charged anion-cation aggregates generated as the introduction of NL cosolvents are preferentially brought to the negatively charged Li anode surface, inducing an anion-derived inorganic-rich SEI. A solvent diagram is further built to illustrate that a solvent with both proper relative binding energy toward Li+ and dielectric constant is suitable as NL cosolvent.

Regulating Interfacial Chemistry in Lithium-Ion Batteries by a Weakly Solvating Electrolyte*.

The performance of Li-ion batteries (LIBs) is highly dependent on their interfacial chemistry, which is regulated by electrolytes. Conventional electrolyte typically contains polar solvents to dissociate Li salts. Herein we report a weakly solvating electrolyte (WSE) that consists of a pure non-polar solvent, which leads to a peculiar solvation structure where ion pairs and aggregates prevail under a low salt concentration of 1.0 M. Importantly, WSE forms unique anion-derived interphases on graphite electrodes that exhibit fast-charging and long-term cycling characteristics. First-principles calculations unravel a general principle that the competitive coordination between anions and solvents to Li ions is the origin of different interfacial chemistries. By bridging the gap between solution thermodynamics and interfacial chemistry in batteries, this work opens a brand-new way towards precise electrolyte engineering for energy storage devices with desired properties.

Stable Anion-Derived Solid Electrolyte Interphase in Lithium Metal Batteries.

High-energy-density lithium (Li) metal batteries are severely hindered by the dendritic Li deposition dictated by non-uniform solid electrolyte interphase (SEI). Despite its unique advantages in improving the uniformity of Li deposition, the current anion-derived SEI is unsatisfactory under practical conditions. Herein regulating the electrolyte structure of anions by anion receptors was proposed to construct stable anion-derived SEI. Tris(pentafluorophenyl)borane (TPFPB) anion acceptors with electron-deficient boron atoms interact with bis(fluorosulfonyl)imide anions (FSI- ) and decrease the reduction stability of FSI- . Furthermore, the type of aggregate cluster of FSI- in electrolyte changes, FSI- interacting with more Li ions in the presence of TPFPB. Therefore, the decomposition of FSI- to form Li2 S is promoted, improving the stability of anion-derived SEI. In working Li | LiNi0.5 Co0.2 Mn0.3 O2 batteries under practical conditions, the anion-derived SEI with TPFPB undergoes 194 cycles compared with 98 cycles of routine anion-derived SEI. This work inspires a fresh ground to construct stable anion-derived SEI by manipulating the electrolyte structure of anions.

A Diffusion--Reaction Competition Mechanism to Tailor Lithium Deposition for Lithium-Metal Batteries.

Lithium metal is recognized as one of the most promising anode materials owing to its ultrahigh theoretical specific capacity and low electrochemical potential. Nonetheless, dendritic Li growth has dramatically hindered the practical applications of Li metal anodes. Realizing spherical Li deposition is an effective approach to avoid Li dendrite growth, but the mechanism of spherical deposition is unknown. Herein, a diffusion-reaction competition mechanism is proposed to reveal the rationale of different Li deposition morphologies. By controlling the rate-determining step (diffusion or reaction) of Li deposition, various Li deposition scenarios are realized, in which the diffusion-controlled process tends to lead to dendritic Li deposition while the reaction-controlled process leads to spherical Li deposition. This study sheds fresh light on the dendrite-free Li metal anode and guides to achieve safe batteries to benefit future wireless and fossil-fuel-free world.

Lithium Nitrate Solvation Chemistry in Carbonate Electrolyte Sustains High-Voltage Lithium Metal Batteries.

The lithium metal anode is regarded as a promising candidate in next-generation energy storage devices. Lithium nitrate (LiNO3 ) is widely applied as an effective additive in ether electrolyte to increase the interfacial stability in batteries containing lithium metal anodes. However, because of its poor solubility LiNO3 is rarely utilized in the high-voltage window provided by carbonate electrolyte. Dissolution of LiNO3 in carbonate electrolyte is realized through an effective solvation regulation strategy. LiNO3 can be directly dissolved in an ethylene carbonate/diethyl carbonate electrolyte mixture by adding trace amounts of copper fluoride as a dissolution promoter. LiNO3 protects the Li metal anode in a working high-voltage Li metal battery. When a LiNi0.80 Co0.15 Al0.05 O2 cathode is paired with a Li metal anode, an extraordinary capacity retention of 53 % is achieved after 300 cycles (13 % after 200 cycles for LiNO3 -free electrolyte) and a very high average Coulombic efficiency above 99.5 % is achieved at 0.5 C. The solvation chemistry of LiNO3 -containing carbonate electrolyte may sustain high-voltage Li metal anodes operating in corrosive carbonate electrolytes.

The Potential Regulation of Working Anode for Long-Term Zero-Volt Storage at 37 °C in Li-Ion Batteries.

The advanced lithium-ion batteries that can tolerate zero-volt storage (ZVS) are in high demand for implantable medical devices and spacecraft. However, ZVS can raise the anode potential, leading to Cu current collector dissolution and solid-electrolyte interphase (SEI) degradation, especially at 37 °C. In this contribution, by quantitatively regulating the dosage of Li6CoO4 cathode additives, controllable potential of the working anode under abusive-discharge conditions is demonstrated. The addition of Li6CoO4 keeps zero-crossing potential (ZCP) and the potential of ZVS below 2.0 V (vs Li/Li+) for LiCoO2|mesocarbon microbead cells at 37 °C. The capacity retention ratio (CRR) increases from 69.1% and 35.9% to 98.6% and 90.8% after 10 and 20 days of ZVS, respectively. The Cu dissolution and SEI degradation are effectively suppressed, while the over-lithiated cathode exhibits high reversible capacity after ZVS. The limiting conditions of long-term ZVS are further explored and a corresponding guide map is designed. When quantitatively regulating ZCP and the potential in ZVS, Cu dissolution, SEI degradation, and irreversible conversion of the cathode constitute the limiting conditions. This contribution designs the most reasonable potential range for ZVS protection at 37 °C, and realizes the best CRR record through precise potential regulation for the first time.

In Situ Li-Plating Diagnosis for Fast-Charging Li-Ion Batteries Enabled by Relaxation-Time Detection.

The Li-plating behavior of Li-ion batteries under fast-charging conditions is elusive due to a lack of reliable indicators of the Li-plating onset. In this work, the relaxation time constant of the charge-transfer process (τCT ) is proposed to be promising for the determination of Li-plating onset. A novel pulse/relaxation test method enables rapid access to the τCT of the graphite anode during battery operation, applicable to both half and full batteries. The diagnosis of Li plating at varying temperatures and charging rates enriches the cognition of Li-plating behaviors. Li plating at low temperatures and high charging rates can be avoided because of the battery voltage limitations. Nevertheless, after the onset, severe Li plating evolves rapidly under harsh charging conditions, while the Li-plating process under benign charging conditions is accompanied by a simultaneous Li-intercalation process. The quantitative estimates indicate that Li plating at high temperatures/high charging rates leads to more irreversible capacity losses. This facile method with rational scientific principles can provide inspiration for exploring the safe boundaries of Li-ion batteries.

Unblocked Electron Channels Enable Efficient Contact Prelithiation for Lithium-Ion Batteries.

Contact prelithiation is strongly considered for compensating the initial capacity loss of lithium-ion batteries, exhibiting great potential for ultralong cycle life of working batteries and the application of large-scale energy-storage systems. However, the utilization of the sacrificial Li source for contact prelithiation is low (<65%). Herein the fundamental mechanism of contact prelithiation is described from the perspective of the Li source/anode interfaces by regulating the initial contact state, and a clear illustration of the pathogeny for capacity attenuation is successfully delivered. Specifically, creating plentiful electron channels is an access to making contact prelithiation with a higher Li utilization, as the mitigated local current density that reduces the etching of Li dissolution and SEI extension on electron channels. A vacuum thermal evaporation for depositing the Li film enables the contact interface to possess an adequate electron channel construction, rendering a Li utilization of 91.0%, and the dead Li yield is significantly reduced in a working battery.